Construction of building for setting up of three star resort at Muzhippilangad, Kannur (Civil, Electrical, AC etc)

Amount

App-A- Building Proper

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 outside the periphery of the area cleared

Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared

Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. Beyound 30 cm girth up to and including 60 cm girth

Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. Beyound 60 cm girth up to and including 120 cm girth

Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. Beyond 120 cm girth up to and including 240 cm girth

Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Above 240 cm girth

Earth work in excavation by mechanical means (Hydraulic excavator) /manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

Open timbering in trenches including strutting and shoring complete ( measurements to be taken of the face area timbered ):Depth not exceeding 1.5 m

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)

Boring, providing and installing bored cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring, with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. all complete, including removal of excavated earth with all lifts and leads (Length of pile for payment shall be measured upto bottom of pile cap).450 mm dia piles

Boring, providing and installing bored cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring, with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. all complete, including removal of excavated earth with all lifts and leads(Length of pile for payment shall be measured upto bottom of pile cap).500 mm dia piles

Boring, providing and installing bored cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring, with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. all complete, including removal of excavated earth with all lifts and leads (Length of pile for payment shall be measured upto bottom of pile cap).600 mm dia piles

Boring, providing and installing bored cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap to carry a safe working load not less than specified,excluding the cost of steel reinforcement but including the cost of boring, with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. all complete, including removal of excavated earth with all lifts andleads, cutting excess length of pile and reinforcement. (Length of pile for payment shall be measured upto bottom of pile cap) 700 mm dia

Providing Steel Liner 6 mm thick for Pile including Fabricating and Setting out and cutting and stacking excess length as per Detailed Drawing and directions of officers at site.

Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge

Vertical load testing of piles in accordance with IS 2911( Part IV) including installation of loading platform and preparation of pile head or construction of test cap and dismantling of test cap after test etc.complete as per specification & the direction of engineer -in-Charge.Single pile above 50 tonne and upto 100 tonne capacity Routine test

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work upto plinth level

Solid block masonry using pre cast solid blocks ( factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part 1 of 1979 for foundation and plinth with thickness 20 cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete

Diluting and injecting chemical emulsion for POST -CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion):Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor:With Chlorpyriphos/Lindane E.C. 20% with 1% concentration

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately. All work above plinth level upto floor V level

Centering and shuttering including strutting, etc. and removal of form for: Foundations, footings, bases of columns, etc for mass concrete

Centering and shuttering including strutting, etc. and removal of form for: Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc

Centering and shuttering including strutting, etc. and removal of form for: Lintels, beams, plinth beams, girders bressumers and cantilevers.

Centering and shuttering including strutting, etc. and removal of form for: Columns, Pillars, Piers, Abutments, Posts and Struts

Centering and shuttering including strutting, etc. and removal of form for: Stairs, (excluding landings ) except spiral - staircases)

Centering and shuttering including strutting, etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platform

Centering and shuttering including strutting, etc. and removal of form for:Shelves (Cast in situ)

Extra additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentering at all levels, over a height of 3.5m, for every additional height of 1 metre or part thereof (Plan area to be measured).Suspended floors, roofs, landing, beams and balconies (Plan area to be measured)

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo - Mechanically Treated bars of grade Fe-500D or more

Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 (1 cement: 6 coarse sand) etc complete)

Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure above floor two level up to floor V level thickness 20cm and above in: CM 1:6 ( 1 cement :6 coarse sand) etc complete

Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x10 cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level for 10 cm thick wall in : CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding complete

Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x10cm or nearest available size confirming to IS 2185 part I of 1979 for Super structure above floor two level upto floor five level for 10 cm thick wall in: CM 1:6 (1 cement : 6 coarse sand) including cost of scaffolding etc complete

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)

Brick work with common burnt clay F.P.S (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1 :2:4 )1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in: Cement mortar 1:6 (1 cement : 6 coarse sand)

Pointing on brick work or brick flooring with cement mortar 1:3 ( 1 cement : 3 fine sand):Flush/ Ruled /Struck or weathered pointing

12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand)

6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand)

15 mm cement plaster on rough side of single or half brick wall of mix:1:4 ( 1 Cement : 4 coarse sand)

12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand)

9 mm cement plastering of mix : 1:3 (1 cement : 3 fine sand ) including all cost of materials, labour charges etc complete

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg /sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservoir, sewage & water treatment plant, tunnels/ subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer in-charge. The product performance shall carry guarantee for 10 years against any leakage. For vertical surface two coats @0.70 kg per sqm

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).Second class teak wood

Supplying and fixing in position Back Coppered mirror (modi float/saint globain) 6mm thick of appropriate sizes as per requirement and fixing with 6mm thick multiwood of the required size of the mirror fixed inthe door shutter with silicon sealent etc. complete.The rate including all material cost, labour charges,conveyance, etc complete

Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Providing and fixing 2nd class teak wood lipping/ moulded beading or taj beading of size 18x5 mm fixed with wooden adhesive of approved quality and screws/ nails on the edges of the Pre-laminated particle board as per direction of Engineer-in-charge.

Providing and fixing Shutter frame of 40mm thick , excluding panelling which will be paid for separately, all complete as per direction of Engineer - in-charge. Second class teak wood 40 mm thick shutter frame

Providing and fixing paneled shutter frame for shutters for doors, windows and clerestory windows including labour for fixing all fittings such as butt hinges, tower bolts, locks etc (cost of fittings paid separately) . complete as per direction of Engineer - in-charge. (Excluding cost of Paneling) Second class teak wood 35 mm thick shutters.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured), Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick: Second class teak wood

Providing and fixing glazed shutters for door, windows and clerestory windows using 4 mm thick pin headed glass panes including ISI marked Stainless Steel Pressed butt hinges bright finished (Heavy) of required size with SS screws. Including Cost of Second class teak wood of 35mm thick frame

Providing and fixing glazed shutters for door, windows and clerestory windows using 4 mm thick float glass panes including ISI marked Stainless Steel Pressed butt hinges bright finished (Heavy) of required size with SS screws.<br>Including Cost of Second class teak wood of 35mm thick frame.

Providing and fixing glazed shutters for door, windows and clerestory windows using 8mm thick Toughened glass panes in the wooden frame already fixed including providing necessary grooves for ixing,necessary adhesive,nails etc

Providing and fixing double action hydraulic floor spring of Dorma make or approved brand as directed by the Engineers having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors including cost of cutting floors, embeding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer -in- Charge.<br>With stainless steel cover plate minimum 1.25 mm thickness

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-incharge ( Door handle, lock, Hydraulic Floor Spring and stopper etc to be paid separately)

Design supply & installation of suspended Spider Glazing system designed to withstand the wind pressure as per IS 875 (Part-III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider & bolt assembly with laminated glass fins21 mm thick. The Glass fins and glass panel assembly shall be connected to Slab/beams by means of SS- 316 Grade stainless steel brackets & Anchor bolts and at the bottom using SS channel of 50x25x2mm using fastener & anchor bolts, non staining weather sealants of approved make, Teflon/ nylon bushes and separators to prevent bimetallic contacts, all complete to perform as per specification and approved drawings. The complete system to be designed to accommodate thermal expansion & seismic movements etc. The joints between glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assembly to be filled with non staining weather sealant, so as to make the entire system fully water proof & dust proof. The rate shall include all design, Engineering and shop drawing including approval from structural designer, labour,T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc.all complete. For the purpose of payment, actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured

Providing and fixing 50 mm thick glazed fire resistant door shutters of 60 minutes fire rating conforming to IS : 3614 (Part - II), tested and certified as per laboratory approved by Engineer-in-Charge, with suitable mounting on door frame, consisting of vertical styles, lock rail, top rail 100 mm wide, bottom rail 200 mm wide, made out of 16 SWG G.I. sheet (zinc coating not less than 120 gm/m2) duly filled FR insulation material and fixing with necessary stainless steel ball bearing hinges of approved make including applying a coat of approved fire resistant primer etc. all complete as per direction of Engineer -in-charge ( panneling to be paid for separately).

Supplying DORMA BB 4330, 5 Knuckle, 2 Ball bearing butt hinges size 4" x 3" x 3mm, in SS 304 and in SSS finish. Suitable for door weights upto 120kgs. Template Drilled Including cost of all screws and conveyance of all materials ec.complete.

Supplying and fixing DORMA (3100-0) lever action flush bolt with 19mm projecting bolt L=172 mm for wood door in satin chrome Including cost of all screws and conveyance of all materials ec.complete.

Supplying and fixing DORMA (3100-1) lever action flush bolt with 19mm projecting bolt L=300 mm for wood door in satin chrome Including cost of all screws and conveyance of all materials ec.complete.

Supplying and fixing DORMA ITS 96, concealed cam action door closer with G 96 N slide channel arm with standard spindle, including cushioned limit stay. Spring size EN 2-4 as per EN 1154 and CE marked. Silver finish. Non-handed version Including cost of all screws and conveyance of all materials ec.complete.

Supplying and fixing DORMA TS 90, cam action door closer with slide channel arm. Spring size EN ¾ as per EN 1154 and CE marked. Silver finish Including cost of all screws and conveyance of all materials ec. complete.

Supplying and fixing DORMA 4012 wall mounted door stop dome with 60mm length with fixing accessories Including cost of all screws and conveyance of all materials etc. complete.

Supplying and fixing Electronic Hotel Lock, RF Mifare technology, 712 Design, Satin Chrome finish, ANSI Mortise, H7 Handle design, Inside Right/Left opening door, Door Thickness-40-41mm. Compatible to Electronic Hotel lock software -DHMSV.10 (Dorma EHL-DEHL RFM 712 SC ANSI H7 IR/IL) Including cost of all screws and conveyance of all materials ec.complete.

Encoder for Programming RF Mifare cards with USB Port for computer interface (DORMA ENCODER - DENC RFM 7104D (With USB Port)

Supply RF Mifare Fudan Chip Card, 13.56 MHZ, 1 K Byte DORMA

Supplying and fixing Energy Saving Switch, with RF Mifare technology, DORMA Model - DESS RFM 843-C. It Can read any RF Mifare card Including cost of all screws and conveyance of all materials ec.complete

Supplying and fixing DORMA 1 point panic device in Contur design, push bar for single door for fire and smoke check doors, with steel latch, security anti thrust latch for door widths upto 1300mm, consisting of 2102F, 2105 in silver finish. As per EN 1125, CE marked Including cost of all screws and conveyance of all materials ec.complete.PHA-2000

Supplying and fixing DORMA 3005, 5 pin Euro profile half cylinder with one side key operation standard length 42mm in satin nickel plated finish with 3 keys. Optional master keying and grand master keying can be done on request. -NMK Including cost of all screws and conveyance of all materials ec.complete

Supplying and fixing External trim for PHA, PHB Panic Hardware DORMA PHT-05 for fire and smoke check doors. For max. 60mm thick door prepared for euro profile cylinder. Silver finish. Including cost of all screws and conveyance of all materials ec. complete.

Supplying and fixing Automatic door bottom RP8si seal from Raven, extruded silicon sealing component, spring loaded to lift clear of the floor. Concealed mounted in a 15mm x 34mm groove. Max gap 13mm. Finish: Anadoised satin clear. L=1220mm Including cost of all screws and conveyance of all materials ec.complete.

od119062/2020_2021 Supplying and fixing Delta Seal for acoustic, fire and smoke protection, suitable for wooden and steel frames, self adhesive, Finish = Black, Length = 1 x 1000mm, Height- 2 x 2750mm Including cost of all screws and conveyance of all materials ec.complete. RP 120- Long Single Doorset RAVEN make.

Supplying and fixing Dorma Mortice sliding door 400 claw bolt with 55mm backset, 22mm sq for end including strike plate in satin stainless steel. EPC 60mm Length both side key operation & Escutcheons in SSS Finish Including cost of all screws and conveyance of all materials ec.complete.

Supplying and fixing SLM 120 Sliding Door System for Timber Door, 3 Metre Length DORMA SLM 80 Accessories - 1 Set SLM Track, 3 mts length - 1 No Including cost of all screws and conveyance of allmaterials etc. complete.

Supplying and fixing DORMA (1209) flush pull for sliding door, rectangular. Finish - Satin stainless steel Including cost of all screws and conveyance of all materials ec. complete.

Supplying and fixing DORMA 278a with 55mm backset, 20mm square forend prepared for euro profile cylinder including strike plate. and EPC 60mm Length both side key operation & Escutcheons in SSS Finish Including cost of all screws and conveyance of all materials ec.complete.

Supplying and fixing Pure 8998 Type 3 Package with Pair of DORMA Pure 8998 Design Lever Handle on Roses & escutcheons. Including 271a Sash lock with 72mm CTC, 55mm Back set 20mm Square for end. EPC 60mm length one side thumb turn other side coin release operation Including cost of all screws and conveyance of all materials etc. complete.

Supplying and fixing DORMA (1206) spring loaded door security chain for the main doors in satin nickel plated. Including cost of all screws and conveyance of all materials ec.complete.

Supplying and fixing DORMA door viewer 1200-1 with 180deg angle viewing adjustable and suitable for door thickness 35-55mm in satin nickle plated finish. Including cost and conveyance of all materials ec.complete

Supplying and fixing DORMA pull Handle TGDID 150 back to back with adjustable fixing for wood doors in satin stainless steel. The pull handles should have supporting washer with raised bevelling on the outer surface. Length =150mm, 19mm dia, -SS304 Including cost of all screws and conveyance of all materials ec.complete.

Supplying and fixing DORMA pull Handle TGDI-D 300 back to back with adjustable fixing for glass, wood and metal doors in satin stainless steel. The pull handles should have supporting washer with raised bevelling on the outer surface. Length =300mm, 22mm dia, -SS304 Including cost of all screws and conveyance of all materials ec.complete.

Supplying and fixing DORMA GBDI D-600 Grab Bar of Length 610mm, 25mm Diameter in Satin stainless Steel Finish etc.complete

Supplying and fixing SS Universal centre lock US 20 with EPC or Universal corner lock US 10 (Dorma) for single or double leafed glass door etc.complete

Supplying and fixing DORMA (3108) floor stop half dome with 45mm dia with fixing accessories, in satin Chrome Including cost of all screws and conveyance of all materials ec.complete.

Supplying and fixing Disable sign plate 3040-D for WC application with fixing screws size 125 x 125mm, rounded corners in SS 304 satin stainless steel finish. Marking in black etc.complete.

Supplying and fixing Female sign plate 3030-F for WC application with fixing screws size 125 x 125mm, rounded corners in SS 304 satin stainless steel finish. Marking in black Including cost of all screws and conveyance of all materials ec.complete.

Supplying and fixing Male sign plate DORMA 3020-M for WC application with fixing screws size 125 x125mm, rounded corners in SS 304 satin stainless steel finish. Marking in black Including cost of all screws and conveyance of all materials etc.complete.

Providing and fixing finished brass hard drawn hooks and eyes:200 mm

Providing and fixing finished brass hard drawn hooks and eyes:150 mm

35 mm thick factory made solid panel fibre door with standered FRP skin of wood grain finish on both sides as per architectural design and molding pattern with corresponding core moldings on the inside with suitable wooden frame around, lock rail etc. as per the manufactures specifications as approved by Engineer in charge and Architect (Wood Grain Decorative Matt Finish)

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.25 mm M.S. laths with 1.25 mm thick top cover

Supplying and fixing Vengai wood wrought and put up for roof members including cost and conveyance of materials etc. complete.

Reepering with 50x25mm Vengai/Thembakam wood reepers and wire nails 50mm long at suitable spacing for M.P.roofing tiles 340mm or nearest available size etc. complete.

Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with specials shaped washers etc.complete

Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

Roofing with pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern etc.complete.

MP hip and ridge tiles 1st class set in CM 1:4 including providing coir yarn to avoid cracking and finishing the edges with redoxide in lines and levels etc.complete.

Cement mortar 1:6 bordering to tiled roof about 65cm2 in section etc.complete.

Providing & fixing Poly carbonate multi wall plain sheet 6 mm thick as approved by the Engineer in charge and should be supplied in a single length of 12m or as decide by the Engineer in charge. The sheets shall be fixed using self drilling/self tapping screw of size (5.5x55mm) with EPDM seal complete upto any pitch in horizontal/vertical curved surfaces, but excluding the cost of purlins, rafters, trusses, and including cutting to size and shapes where ever required.

25 mm wooden planking, tongued and grooved in flooring, including fixing with iron screws complete with: Second class teak wood

Providing and laying Ceramic glazed floor tiles of size 600x600 mm (thickness to be specified by the manufacturer), of Ist quality conforming to IS : 15622, of approved make like Kajaria, Somany, RAK, NItco, Johnson in all colours and shades, n, laid on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make like Kajaria, Somany, RAK, NItco, Johnson in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.<br>Size of Tile 800x 800 mm (Basic price of tile shall not be less than Rs. 100/sqft)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make like Kajaria, Somany, RAK, NItco, Johnson in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 240x 120 cm (Basic price of tile shall not be less than Rs. 250/sqft)

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS : 15622, of approved make like Kajaria, Somany, RAK, NItco, Johnson in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 800x800 mm (Basic price of tile shall not be less than Rs. 100/sqft)

Providing and fixing I st quality ceramic glazed wall tiles of size 30x60cm or nearest conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make like Kajaria, Somany, RAK, NItco, Johnson in all colours and shades as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (Basic price of tile shall not be less than Rs. 80/sqft)

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer) of Ist quality conforming to IS: 15622 of approved make in all colours, shades, except white, Ivory, Grey Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand) including pointing the joints with white cement and matching pigments etc., complete.

Kota stone slab flooring over 20 mm ( average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand)25 mm thick

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvillinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-incharge.. Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Stone tile work for wall lining upto 10 m height with special adhesive over 12mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand), including pointing in white cement with an admixture of pigment to match the stone shade.8 mm thick (mirror polished and machine cut edge)Granite stone of any colour and shade

Providing and fixing 18 mm thick gang saw cut, mirror, polished, pre moulded and pre polished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab upto 0.50 sqm

Providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer -in-Charge. Granite work

Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of Ist quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete.

Supplying and fixing Wooden (Teak wood 2nd Class) with 10mm toughened glass for Handrails for stair. Height of hand rail comes to 1.20m, Top rail with Teak wood of 7x5cm, Horizontals 2Nos of size 5x3cm and Verticals 96 cm C/C with 6x4 cm size, inside frame 60 cm height with 10 mm thick Toughened glass pans fixed with Teak wood Reaper , including French Spirit polishing Two coats with one coat Melamine Polishing etc. complete as drawing and directions of Deptl. officers at site.

Supplying and fixing Wooden (Teak wood 2nd Class) hand rails for Balcony and Varandha for a height of 1.20m . Top rail with Teak wood of 7x5cm size, Horizontals bottom above 15cm from floor with teak wood of size 5x3cm and Verticals from floor to top rail 110cm C/C or nearest spacing with 6x4 cm size, in between inside horizontals frame provided with verticals at 12cm C/C 100 cm height using with teak wood of 3x2cm size , including French Spirit polishing two coats with one coat Melamine Polishing etc complete as drawing and directions of Deptl. officers at site.

Supplying and fixing MS hand rails to fire stair for a height of 1.20 using top rail with 60x40x3.60,Verticals with 40mm MS flate of 10mm thick at 1.10m C/C spacing, Horizontals 2nos with 25x6mm, inside horizontals 12mm MS square rod at 10cm C/C as verticals, including painting with iron primer one coat with synthetic Enamel paint two coats , cost and conveyance of all materials, all welding charges, all fitting charges etc. complete as per the drawing and directions of deptl.officers at site.

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum plain board conforming to IS : 2095-Part 1

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick Calcium Silicate ceiling Plain Board.

Falce Ceiling with 12mm thick Teak planks, planed , lap jointed and wire nailed to wooden frame work etc.complete as per directions.(Wooden frame work paid separately) including PU polishing two coats etc.complete.

Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shadeas approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account).

Structural Glazing works - Providing and supplying Reflective Glass Panels comprising of 5 mm thick of approved colour and shade with reflective soft coating on surface 0.25-0.552 of approved colour and shade etc. ,all complete as per the Architectural drawings, as per the approved shop drawings, as specified, and as directed by the Engineer- in- Charge including cost and conveyance of all materials (silicon sealant, baker rod, mask tape etc), all scaffolding charges, hire and labour for all tools and plants.For payment, only the actual area of glass on face of the glass panels (but excluding the area of grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm.(Payment for fixing of Reflective Glass Panels in the curtain glazing is included in cost of relevant Item*).

Designing, fabricating, testing, protection, installing and fixing in position semi(grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including: a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)- cum smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalization & drainage and protection against fire hazard including: b) Fabricating and supplying serrated M.S. hot dip galvanized / Aluminium alloy of6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers. c) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment ,including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass. d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal thegap between the building structure and all its interfaces with curtain glazing to make it water tight. e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete. This item includes cost of all inputs of designing, labour for fabricating and installation of aluminium grid, installation of glazed units, T&P, scaffolding and other incidental charges including wastages etc., enabling temporary structures and services, cranes or cradles etc.as described above and as specified. The item includes the cost of getting all the structural and functional design including shop drawings checked by a structural designer, dully approved by Engineer-in-charge. The item also includes the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for occupation. In the end, the Contractor shall provide a water tight structural glazing having all the performance characteristics etc. all complete as required, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineerin- Charge. Note:- 1. The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium section capping for fixing in the grooves of the curtain glazing and vermin proof stainless steel wire mesh shall be paid for separately under relevant items under this sub-head. However, for the purpose of payment, only the actual area of structural glazing (including width of grooves ) on the external face shall be measured in sqm. up to two decimal places .Note:-2. The following performance test are to be conducted on structural glazing system if area of structural glazing exceeds 2500 Sqm from the certified laboratories accreditated by NABL(National Accreditation Board for Testing and Calibration Laboratories), Department of Science & Technologies, India. Cost of testing Is payable separately. The NIT approving authority will decide the necessity of testing on the basis of cost of the work, cost of the test and importance of the work. Performance Testing of Structural glazing system Tests to be conducted in the NBL Certified laboratories1. Performance Laboratory Test for Air Leakage Test (-50pa to – 300pa) & (+50pa to+300pa) as per ASTM E-283-04 testing method for a range of testing limit 1 to 200 mVhr”2. Static Water Penetration Test. (50pa to 1500pa) as per ASTME- 331-09 Testing method for a range up to 2000 ml.”3. Dynamic Water Penetration (50pa to 1500pa) as per AAMA 501.01-05 testing method for a range upto 2000 ml”4. Structural Performance Deflection and deformation by static air pressure test(1.5 times desing wind pressure without any failure) as per ASTME-330-10 testing method for a range upto 50 mm”5. Seismic Movement Test (upto 30 mm) as per AAMA 501.4-09 testing method for Qualitative test” Tests to be conducted on site6. Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi)upto 2000ml”

Natural Stone tile work for wall lining upto 15 m height with special adhesive over 12mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand), including pointing in white cement with an admixture of pigment to match the stone shade etc. complete as per the Directions of Engineers at site. including all scaffolding charges.

Applying priming coats with primer of approved brand and manufacture, having low VOC ( Volatile Organic Compound) content. With water thinnable cement primer on walls surface having VOC content less than 50 grams / litre

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete

Finishing walls with textured exterior pint of required shade: New work (Two or more coats applied @ 3.28 ltr/ 10 sqm ) over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture including applying additional coats wherever required, to achieve even shade and colour. Two coats

Painting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.Two coats

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work

Polishing the wooden surface with two coats French Spirit and after drying Melamine Polishing to smooth finish after sand papering and cleaning the surface etc. complete.

Supplying and fixing C.I with out frame for manholes:500 mm diameter C.I. (medium duty) the weight of the cover to be not less than 58 kg

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand).Medium shade pigment using 50% white cement 50 % Grey cement

App-B - Sanitary and Water Supply

Providing & fixing of white colour ceramic Table Top wash basin of size 565x420x140 mm (made of Jaquar model No. KUS-WHT- 35935) with overflow arrangements, Bottle trap (Jaguar Model No. ALD- 769 L300 x 190) 32mm size with 300 mm and 190mm long wall connection pipe and wall flange and waste coupling of model No.ALD-705L130mm including all accessories for fixing wash basin etc. complete (quality and brand as approved by the KTDC). The rate includes cost and conveyance of all materials, all labour charges etc. complete

Supplying and fixing Pillar type Single lever Mini Basin Mixer without popup waste system with 450mm long braided hoses of Jaquar or equivalent Model No.FLR-5025B. This rates includes all material charges, labour charges and conveyance etc.

Supplying and fixing Sink Cock Table Mounted Jaquar or equivalent Model No.FLR-5359N. This rates includes all material charges, labour charges and conveyance etc

Supplying and fixing Angular Stop Cock with wall flange Jaquar or equivalent Model No.FLR-5053N. This rates includes all material charges, labour charges and conveyance etc

Supplying and fixing 450mm long Braided Hose with Two 15mm Nuts & Rubber washers without Nipple (Suitable for Geysers) Jaquar or equivalent Model No.ALD-805B. This rates includes all material charges, labour charges and conveyance etc.

Supplying and fixing Jaquar or equivalent Over Head Shower 150x150mm model No.OHS-CHR-1605 with shower arm model No.SHA-455L400x25x25mm square shape for wall mounted shower with flange This rates includes all material charges, labour charges and conveyance etc

Supplying and Fixing Concealed Body of thermostatic Shower mixer diverter of Jaquar make or equivalent model No.ALD-661 with KUP-35661KPM Aquamax Exposed Part kit etc complete as per the directions of the Engineers at site.

Supplying and fixing Rimless Wall Hung water closet Jaquar make or equivalent model No. ARS- WHT 39951 with UF soft close seat cover, hinges, accessories set, Singe piece slim concealed flushing cistern with floor mounting frame, installation kit and "S type" drain pipe connection set Jaquar modal No. JCS WHT- 2400WS and Control Plate (Jaquar JCP CHR 852415) or equivalent of approved make including cost, conveyance, all leads and lifts, all labour charges etc complete.

Supplying and fixing in position Corner glass shelf (with bracket) of Model No. ACN-1173 of Jaquar or approved equivalent including cutting and making good the walls including cost and conveyance of all materials, all fitting charges etc. complete

Supplying and fixing CP. Toilet Paper Roll Holder with flap Jaquar Model No.AKP-35753P or approved equivalent quality including cutting and making good the walls including cost and conveyance of all materials, all fitting charges etc. complete.

Providing and fixing 600mm long CP superior quality towel rack with lower hanger Jaquar Model No.AKP- 35781PS with flange and concealed screws or approved equivalent quality including cutting and making good the walls including cost and conveyance of all materials, all fitting charges etc. complete.

Providing and fixing 600mm long CP superior quality towel rail Jaquar Model No.ACN-1111SM with flange and concealed screws or approved equivalent quality including cutting and making good the walls including cost and conveyance of all materials, all fitting charges etc. complete.

Supplying and fixing CP Health Faucet superior quality (Jaguar model No.ALD-573 or equivalent make) including cost of materials and labour charges etc complete as per the direction of site Engineer-incharge.

Supplying and fixing Shower Basket (Jaguar model No.ACN-1177N or equivalent make) including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.

Providing and fixing beveled edge mirror of superior glass of 6mm thick (of approved quality) including chamfer the edge of glass to smooth finish ,providing holes for entering screws for fixing the glass in wall with wooden plugs and S.S screws complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to floor V level : 1:1½:3 (1 Cement: 1½ coarse sand: 3 graded stone aggregate 20 mm nominal size). Toilet Floor

Lime Cement Concrete 1:2:4 using 40mm or below size broken brick mixed with 80kg of cement per m3 of mortar including all leads and lifts etc. complete for filling Sunken portion of toilets.

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 sqm

Providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer -in-Charge. Granite work

Extra for providing opening or required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in marble/granite/ stone work, including necessary holes for pillar tapsetc. including moulding, rubbing and polishing of cut edges etc. complete.

Supplying and Fixing Division Plate(CERA) 90 x 320 x 720 mm or equivalent of approved quality with approved make including cost, fixing charges etc complete(Model No : CERA 5011 Division Plate)(Snow White)

Supply and installation of sliding door type Jaquar shower enclosure with 8 mm thick toughened glass using glass to wall and floor brackets , Pentagonal Support bar, magnetic seal , water dispenser, wall seal, wall clamp, sealant, sliding arrangements, handles etc complete as per the attached drawings.Patch fittings,Hinges, brackets: Ozone OSH or Dorma S 2000 or equivalent etc. The rate includes cost and conveyance of all materials , all labour charges etc. complete. as per the directions of departmental Engineers at site and Architectural drawings.

Providing and fixing Jaquar ORP-10037PM Bib Cock with Wall Flange 15 mm nominal bore etc. complete

Supplying and fixing Jaquar ALD- 087 FT Heavy Body of Concealed Stop Cock Suitable for 20mm Pipe Line with Plastic Protection Cap and CON-087FTK Exposed Part Kit of Concealed Stop Cock with Fitting Sleeve, Operating Lever & Adjustable Wall Flange etc. complete.

Supplying and fixing Jaquar ACN-1131N Soap Dish with Holder etc. complete.

Supplying and fixing Jaquar ACN-1135N Soap Dispenser with Glass Bottle etc. complete.

Supplying and fixing Jaquar PRS-073 Auto closing Concealed Urinal Flush Valve with Wall Flange etc. complete.

Providing and fixing wash basin Jaquar make model OPS-WHT-15801Wall Hung Wash Hand Basin with Fixing Accessories, Size: 575x475x195mm, OPS-WHT-15305 Half Pedestal with Fixing Accessories , 32mm PVC waste, ORP-10001PM Pillar Cock, ALD-803AB 450mm Long Braided Hose with M10X1 Nipple, 15mm Nut, O-Ring & Rubber Washer etc. complete.

Providing and fixing Urinals Jaquar URS-WHT-132530 with fixing accessories of size 370x315x620 mm C.P. brass spreaders with brass unions and clamps, CP waste Jaquar ALD-709 or nearest size to urinals complete, including cutting and making good the walls and floors wherever required etc. complete.

Providing and fixing Jaquar CNS-WHT-353S Extended wall hung-WC with PP soft Close seat and cover , hinges accessory set of size 375x620x77mm with Jaquar CNS-WHT-203 Cistern with all fittings etc complete.

Providing, fixing, Floor trap & SS Gratings with Anti-Cockroach Trap including all cost conveyance etc

Supplying and fixing white vitreous china battery based infrared sensor urinal (Jaquar URS-WHT-13255 and CHR 51097) having pre and post flusing with water, having water inlet from back including fixing to wall with suitable brackets all as per direction of engineer in charge including painting of fittings and cutting and making good the walls and floors wherever required. The rate includes all material, labour conveyance charges etc complete.

Supplying and fixing to the top of the counter with best quality Stainless Steel kitchen Sink manufactured from 1mm thick 304 grade Stainless Steel of size 1155x515x250mm (CERA model No. B4512205 or any brand as per engineers at site) gloss finish including Jaquar or Cera make 40mm CP brass waste and wall mounted Jaquar sink cock with 150mm swivel spout, connecting legs and wall flanges and connecting to the water and waste water system, testing, finishing etc. complete.

Supplying and fixing Multi floor trap 100x75mm size with jail including cutting, boring through walls, RCC slabs etc. and making good the floor, wall (DAR 17.29 Based)

Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 50 mm pipe 6 kgf/cm2

Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Concealed work including cutting chases and making good the wall etc. 63 mm pipe 6 Kgf/cm2

Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Concealed work, including cutting chases and making good the wall etc. 75 mm pipe 6 Kgf/cm2

Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Concealed work, including cutting chased and making good the wall etc.110 mm pipe 6kgf/cm2

Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Elbow

Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes, including jointing with PVC solvent cement-63mm Door Elbow

Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Bend

Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes including jointing with PVC solvent cement - 63x63x63 mm dia Tee

Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement -63x63x63 mm dia Door Tee

Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63x50 mm dia Reducer

Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75 mm dia Elbow

Providing and fixing PVC moulded fittings / accessories for Rigid PVC pipes, including jointing with PVC solvent cement -75 mm dia Door Elbow

Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75 mm dia Bend

Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement -75x75x75 mm dia Tee

Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75x75x75 mm dia Door Tee

Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75 mm dia Vent cowl

Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75 mm dia Socket /coupling

Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement -75x63 mm dia Reducer

Providing and fixing PVC moulded fittings / accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia 45 degree Elbow

Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia Elbow

Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110x75 mm dia Reducer

Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement-110 mm dia Door Elbow

Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement- 110 mm dia Bend

Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes including jointing with PVC solvent cement 110x110x110 mm dia Tee

Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110x110x75 mm dia Door Tee

Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110x110x75 mm dia Door Tee

Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes, including jointing with PVC solvent cement -110 mm dia Vent cowl

Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement -110mm dia offset

Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia vent cowl

Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes,including jointing with PVC solvent cement - 110 mm dia Socket/ coupling

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall 20mm nominal outer dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall 25mm nominal outer dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall 32mm nominal outer dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall 40mm nominal outer dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall 50mm nominal outer dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.20 mm nominal outer dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.25 mm nominal outer dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer -in-Charge. Concealed work, including cutting chases and making good the wall etc.32 mm nominal outer dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work 40 mm nominal outer dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work50 mm nominal outer dia pipes

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :32 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :40 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :65 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :20 mm nominal bore

Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, Refilling & testing of joints complete as per direction of Engineer in Charge. 50 mm dia 10Kgf/cm2

Providing and fixing PVC pipes includings of pipes with one step PVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer in Charge. 63 mm dia 6Kgf/cm2

Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 75 mm dia 6 Kgf/ cm2

Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2

Providing and fixing PVC pipes includings jointing of pipes with one step pvc solvent cement, trenching refilling & testing of joints complete as per direction of Engineer in Charge. 150 mm dia 6 Kgf/cm2

Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 6Kgf/cm2 - External work- Exposed on wall

Providing and fixing PVC pipes including fixing the pipe with clamps/ clips/ at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 mm dia 6 Kgf/cm2 - External work- Exposed on wall

Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 m dia 4 Kgf/cm2 - External work - Exposed on wall

Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 10Kgf/cm2 - External work - Exposed on wall

Providing and fixing PVC pipes including fixing the pipe with clamps/ clip at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 6 Kgf/cm2 - External work - Exposed on wall

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) with R.C.C. top mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size,) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) finished with a floating coat of neat cement complete as per standard design: Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weigh of cover 23 kg and weight of frame 15 kg):With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) with R.C.C. top with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size,) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) finished with a floating coat of neat cement complete as per standard design: Inside size 120x 90 cm and 90 cm deep including C.I. cover with frame ( heavy duty ) 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg ( weight of cover 108 kg and weight of frame 100 kg)With common burnt clay F.P.S. ( non modular) bricks of class designation 7.5

Providing and fixing square-mouth S.W. gully trap class SP -1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:100x100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Extra for depth for manholes Size 90x80 cm With common burnt clay F.P.S. ( non modular ) bricks of class designation 7.5

Extra for depth for manholes Size 120x90 cm With common burnt clay F.P.S. ( non modular ) bricks of class designation 7.5

Supply testing and commissioning of Booster Pump (Grundfoss, Kirloskar/CRI/ESPA) with VFD capable of delivering minimum 350LPM discharge at a head of 3.5Bar (35M) the system shall have two vertical inline pumps and be capable of automatic start and stop operation and complete with Hydro Pnematic pressure tank of 225L capacity, pressure sensors, pressure gauge, pump panel, necessary cabling and bypass arrangements etc. complete (For domestic water supply)

Supply and Installation of Water Transfer Pumps System for Pumping Water as per the following Specifications.( Domestic Water) 3HP, 3Phase Open Well type multi stage Submersible Pump and all accessories Suitable for a Head of 30 mtrs. Pump motor shall be of IE2 efficiency and Pump shall have minimum 3 star BEE rating or equivalent efficiency including Installation of Motor Starter with Illuminated LED type On/ Off/ Reset Push Buttons, 3Phase DOL Motor Starter with 20A 3phase Contactor and Thermal Overload Relay or suitable to the pump, Control wiring Wall Mount in an outdoor type Enclosure etc. complete (Kirloskar/CRI/ESPA).

Supply and Installation of Water Transfer Pumps System for Pumping Water as per the following Specifications. (Domestic Water) 5HP, 3Phase Open Well type multi stage Submersible Pump and all accessories Suitable for a Head of 30 mtrs. Pump motor shall be of IE2 efficiency and Pump shall have minimum 3 star BEE rating or equivalent efficiency including Installation of Motor Starter with Illuminated LED type On/ Off/ Reset Push Buttons, 3Phase DOL Motor Starter with 20A 3phase Contactor and Thermal Overload Relay or suitable to the pump, Control wiring Wall Mount in an outdoor type Enclosure, cost of Nylon rop, cables etc. complete (Kirloskar/CRI/ESPA).

Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Supplying , installing testing and commissioning of Water treatmant plant of capacity 7500 lts/hr comprising of Katalox filter, carbon filter, chlorine dosing pump Kirloskar/equivalent), alum dosing pump (Kirloskar/equivalent), antiscalent pump (Kirloskar/equivalent) with 2 WTP filter feed pumps (Kirloskar/equivalent 2 HP submersible or monoblock 35 M head, One working + One stand by) inter connecting pumps etc. complete as per manufactures specification and directions of Engineer in charge

App-C- Construction of STP and UG tank

Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials. All kinds of soil

Open timbering in trenches including strutting and shoring complete ( measurements to be taken of the face area timbered ):Depth not exceeding 1.5 m

Open timbering in trenches including strutting and shoring complete ( measurements to be taken of the face area timbered ):Depth exceeding 1.5 m but not exceeding 3 m

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40nominal size)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level: 1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 150 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).

Centering and shuttering including strutting, etc. and removal of form for: Foundations, footings, bases of columns, etc for mass concrete

Centering and shuttering including strutting, etc. and removal of form for: Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Centering and shuttering including strutting, etc. and removal of form for: Suspended floors, roofs, andings, balconies and access platform

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo - Mechanically Treated bars of grade Fe-500D or more

Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: Cement Mortar 1:6 (1 cement : 6 coarse sand)

12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand)

Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and applying integral crystalline slurry of hydrophilic in nature for water proofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels/ subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5Parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineerin-charge. The product performance shall carry guarantee for 10 years against any leakage. For vertical surface two coats @0.70 kg per sqm

Supplying and fixing Cast Iron Manhole cover with frame and locking arrangements of size 600x600mm (Medium -Weight Not less than 65kg/each) including all conveyance, all labour charges etc. complete.

Providing MBBR Media - Type Corrugated round type, white color Surface Area 500 m2/m3 MOC Virgin Plastic/polypropylene Specific Gravity 0.90 –0.95 gms/cm3 Voidage > 98%

Supplying and fixing Anaerobic Media 0.4mm & 0.5mm thick sheet having size 1200mm x 600mm PVC Make - Cool Deck /MM Aqua etc.complete

Supplying and fixing Blowers with Motors 70 Cu.m./hr@ 4500MMWG, Twin lobe roots blower Make - Everest/ A1 Blowers/ Kay including all conveyance etc. complete.

Supplying and fixing Aeration Grid CPVC 1” dia piping network provided with holes etc. complete including all conveyance

Supplying and fixing Pressure Sand Filter FRP With Media 0.45m Dia x 1.6m ht Make : Pentair/ Canature including all conveyance etc. complete.

Supplying and fixing Activated Carbon Filter With Media FRP 0.45m Dia x 1.6m ht Make : entair/Canature etc. complete. including all conveyance.

Supplying and fixing PSF Feed Pumps cast iron 3Cum/hr @ 40 MLC Head Make : Kirlosakar/Lubi etc. complete including all conveyance

Supplying and fixing Screen (SS) including all conveyance etc. complete.

Supplying and fixing Hypo Dosing System Capacity : 6LPH with dosing Tank Make : Milton Roy including all conveyance.

Supplying and fitting Waste Water Transfer Pumps 3Cub.m/hr @10MLC Head, Self priming centrifugal pump Make : Kirlosakar/Lubi etc. complete.

Ultra filtration System Capacity : 3000LPH Feed Pump 3000LPH (2Nos.), Back wash Pumps 10000LPH (1No.), UF membrane, Flow meters, bag filter, cleaning system with back wash tank, dosing Pump with tank, semi-automation Control Panel, necessary UPVC & SS piping etc including all conveyance

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall40 mm nominal outer dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work40 mm nominal outer dia pipes

Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 40 mm dia 6Kgf/cm2 - Internal work - Exposed on wall

Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints compete as per direction of Engineer in Charge. 40 mm dia 6 Kgf/cm2

App-D- Construction of Swimming pool

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed. All kinds of soil

Open timbering in trenches including strutting and shoring complete (measurements to be taken of the face area timbered ):Depth not exceeding 1.5 m

Extra for every additional lift 1.5 m or part thereof in excavation / banking excavated or stacked materials. All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)

Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering, shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer – in -charge. Note:- Cement content considered in this item is @330 kg/cum. Excess /less cement used as per design mix is payable/recoverable separately. All work up to plinth level

Centering and shuttering including strutting, etc. and removal of form for: Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo - Mechanically Treated bars of grade Fe-500D or more

Providing and applying integral crystalline slurry of hydrophilic in nature for water proofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels/ subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 partsintegral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineerin-charge. The product performance shall carry guarantee for 10 years against any leakage. For vertical surface two coats @0.70 kg per sqm

18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand ) and a top layer 6 mm thick cement plaster 1:3 ( 1 cement : 3 coarse sand) finished rough with sponge.

12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand)

Providing and fixing Glass mossaic tiles at finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design, fixing in customize design as per direction of Engineer-in-charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-charge.

Providing and laying flamed finish granite stone flooring in required design and patterns, in linear as well as curvillinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in charge. a. Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Supply, erection and commissioning of FRP / swimming pool filtration unit with all accessories, lids, strainers, multi port valves, filter media , pressure gauge etc. for 50m3/Hr flow rate approved make (Aqualus/Astral/Renter/Pentain/Emox)

Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 10Kgf/ cm2- Internal work- Exposed on wall

Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 10 Kfg/cm - Internal work- Exposed on wall

Providing and fixing PVC pipes includes jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 25 mm dia 10KGF/cm2

Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 50 mm dia 10Kgf/cm2

Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 75 mm dia 6 Kgf/ cm2

Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2

Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75 mm dia Bend

Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75 mm dia Socket /coupling

Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement- 110 mm dia Bend

Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia Socket/ coupling

Providing and fixing gun metal non-return valve of approved quality (screwed end):<br>100 mm nominal bore Vertical

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete:25 mm nominal bore

Providing and fixing gun metal non-return valve of approved quality (screwed end):80 mm nominal Bore Vertical

Supplying and fixing of filter feed pump for Pool Filter 50m3/HR with a head of 20m with starter, Cable and all accessories as per KSEI standards (5HP approved make Aqualux, Kirloskar, Groundfos, Crompton) etc. complete. Engineers at site.

Supplying and Fixing ISI marked GM Butterfly Valve for 75mm Dia PVC pipe etc. complete.

Supplying and Fixing ISI marked GM Butterfly Valve for 110mm Dia PVC pipe etc. complete

Providing Hair and Lint Strainer to fix with pool Pump

Supplying Pressure Gauge of 100mmdia

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete:50 mm nominal bore

Supplying and fixing Chemical dozing pump with all accessories (Starter, Fixing arrangements etc) approved make Milton Roy/Alsa/Marine etc. complete.

Supplying Impression metal center pole patio Umbrella with base (Garden or Outdoor Umbrella) for swimming pool etc. complete.

Supplying swimming pool stool etc. complete.

Supplying Swimming pool wooden lounger etc. complete.

APP-E-Providing Solar Water Heater and Pumps

Supplying Standard solar circulation pump (1W)Make: Xylem/ Grundfos, 1ØFlow rate: 1.4 m³/h

Supplying programmable Solar controller to control the operation of the solar circulation pump

Supplying Air-water medium temperature heat pump with output of 9.5kW & input of 1.875k W with Scroll compressor, R407 C refrigerant with hot water output of 55°C(2 W).

Supplying Heat Pump-Circulation Pump Make Xylem/Grundfos, 3-Ph flow rate:4.20m3/hr @2Bar

Supplying Hot water storage tank of 3000 litr capacity, made from low carbon steel, double vitreous enameled with utility ports magnesium sacrificial anode, sensor ports duly insulated, heating ports (optional) with100mm Rock wool Slabs held in a wire mesh with 24gauge cladding insulation.

Supplying Hot water re-circulation pump on the building Make Xylem/ Grundfose (1W), 1-Ph Flow rate3.2m3/hr @3Bar

Supplying outdoor type (Hot water Re-circulation Controller) timer/ temperature based comprehensive controller to work in conjunction with heating system with graphical LCD display.

Labour Charge for installation, testing commissioning of Solar Hybrid System (Combination of Solar and Heat pump) with solar collectors and storage tanks will be done in GI piping with MS fittings, and between heat pumps and storage tanks will be carried out in CPVC. Nitrile rubber insulation will be done for the pipelines with all necessary accessories, fittings & safety devices, installation and commissioning of all electrical works comprising of distribution panel out door type with suitable main MCCB and MCB, internal wiring and cabling from the distribution panel to solar circulation pumps, heat pumps, heat pump circulation pumps, hot water circulation pumps and timer temperature control panel and all included. (Except cost of GI/CPVC pipes and fittings, electrical fittings etc.) including hire of tools and plants.

Providing and fixing Polyethelene - Aluminium - Polyethelene ( PE - AL- PE) Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80?C including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) eg. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 meter spacing. This includes testing of joints complete of joints complete as per direction of the Engineer -in-Charge. Internal work - Exposed on wall2025 ( 25 mm OD) pipe

Providing and fixing Polyethelene - Aluminium - Polyethelene ( PE - AL- PE) Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80?C including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) eg. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 meter spacing. This includes testing of joints complete of joints complete as per direction of the Engineer -in-Charge. Internal work - Exposed on wall2532( 32 mm OD ) pipe

Providing and fixing Polyethelene - Aluminium - Polyethelene ( PE - AL- PE) Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80?C including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) eg. elbows, tees, reducers, couplers &connectors etc., with clamps at 1.00 meter spacing. This includes testing of joints complete of joints complete as per direction of the Engineer -in-Charge. Internal work - Exposed on wall4050 (50 mm OD) pipe

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work- Exposed on wall20 mm dia nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work- Exposed on wall25 mm dia nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work- Exposed on wall32 mm dia nominal bore

Providing and fixing G.I. Union in G.I pipe including cutting and threading the pipe and making long screws etc.(new work) 25mm nominal bore

Providing and fixing G.I. Union in G.I pipe including cutting and threading the pipe and making long screws etc. complete ( New work):32 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :32 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :20 mm nominal bore

Providing and fixing gun metal non-return valve of approved quality (screwed end):25 mm nominal bore Vertical

Supplying and fixing Pressure release Vale of 20mm GM or Brass Valve.

Supplying and fixing GM/Brass 20mm Air Release Valve etc. complete.

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

APP-F- Construction of Compound Wall and Plant Room

Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with: Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size

Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete.

Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 150 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).

Centering and shuttering including strutting, etc. and removal of form for: Arches, domes, vaults up to 6m span

Centering and shuttering including strutting, etc. and removal of form for: Lintels, beams, plinth beams, girders bressumers and cantilevers

6 Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo - Mechanically Treated bars of grade Fe-500D or more

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Second class teak wood

Providing and fixing paneled shutter frame for shutters for doors, windows and clerestory windows including labour for fixing all fittings such as butt hinges, tower bolts, locks etc (cost of fittings paid separately) . complete as per direction of Engineer - in-charge. (Excluding cost of Paneling) Second class teak wood 35 mm thick shutters.

Polishing the wooden surface with two coats French Spirit and after drying Melamine Polishing to smooth finish after sand papering and cleaning the surface etc. complete.

Providing and fixing glazed shutters for door, windows and clerestory windows using 4 mm thick pin headed glass panes including ISI marked Stainless Steel Pressed butt hinges bright finished (Heavy) of required size with SS screws. Including Cost of Second class teak wood of 35mm thick frame.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured), Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick: Second class teak wood

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer) of Ist quality conforming to IS: 15622 of approved make in all colours, shades, except white, Ivory, Grey Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigments etc., complete.

Supplying DORMA 3090F, 5 Knuckle, 2 bearing butt hinges size 4" x 3" x 3mm, in SS 304 and in satin stainless steel. As per EN 1935, CE Marked. Suitable for door weights upto 20kgs. Including cost of all screws and conveyance of all materials etc. complete.

Supplying and fixing DORMA (3100-1) lever action flush bolt with 19mm projecting bolt L=300 mm for wood door in satin chrome Including cost of all screws and conveyance of all materials etc. complete.

Supplying and fixing DORMA 278a with 55mm backset, 20mm square formed prepared for euro profile cylinder including strike plate. and EPC 60mm Length both side key operation & Escutcheons in SSS Finish Including cost of all screws and conveyance of all materials etc. complete.

12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand)

6 mm cement plaster 1:3 ( 1 cement : 3 fine sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams.

Reepering with Cement mortar 1:6 of size 50x25mm over RCC slab for laying MP roofing tiles, including watering , curing all leads and lifts etc. complete.

Roofing with pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern etc. complete.

MP hip and ridge tiles 1st class set in CM 1:4 including providing coir yarn to avoid cracking and finishing the edges with redoxide in lines and levels etc. complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface: Water thinnable cement primer

Finishing walls with Acrylic Smooth exterior paint of required shade: New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

APP-G- Drive way, Parking and walk way

Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil

Construction of granular sub- base by Providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, Carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in- Charge.With Material conforming to Grade - I ( size range 75 mm to 0.075 mm)having CBR Value- 30

Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

Providing and laying 80 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm (nominal size)

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature jointed with cement mortar 1:3 ( 1 cement : 3 coarse sand) , including making joints with or without grooves ( thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge ( length of finished kerb edging shall be measured for payment ). ( Precast C.C. kerb stone shall be approved by Engineer-in-Charge)

Painting runway/ taxi track /apron making with adequate nos of coats to give uniform finish with road marking paint of superior make as approved by the Engineer-in-Charge, i/c cleaning the surface of all dirt, scales, oil grease and other foreign material etc. and lining out complete. New work ( Two or more coats)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work

Supplying Prefabricated Sintex Security Cabin of size 6'×6'×7' with 4 way slanting roof and having walls shall be made out of 25mm thick, corrosion painted GI square tubular pipe framework and cladding, with sintex exterior wall PVC sections jointed by tongue and groove locking and flooring with GI colour coated roofing (4 way standing) and having false ceiling shall be done with sintex polymeric section of 250×6mm with an air gap of minimum 6mm joined together by tongue and groove using self taping screws and flooring with 25mm thick cement filled plastocrete panels with vinyl flooring on 40mm square tube frame work and having fabricated door with 19mm GI square pipes and wall colour cladding and having sliding glass windows with sintex PVC outer frames.

APP-H- Furniture and Curtains

Teak wood framed Wooden Bed side table of size 45x45x45cm or nearest size with double drawer and brass ornamental handles, locks and knob for all rooms duly finished of Teak wood frame as per the design provided. Wood surface shall be sanded smoothly with two coats of sealer applied and finished with two coats of polyurethane / melamine ( glossy/matt finish) in teak finish.

Supply of Teak Wood Cot With ornamental (Carved) Head Board of size 210x180 cm or nearest available size including Wood surface shall be sanded smoothly and two coats of sealer applied and finished with two coats of polyurethane melamine (glossy/matt finish) polish, all loading and unloading charges, all conveyance etc as Directed by Departmental Engineers.

Teak wood framed Wooden chair seat and back with Good quality Cushion with high grade furniture fabric shall be used to finish, for all rooms (writing chair)duly finished of Teak wood frame as per the design provided. Wood surface shall be sanded smoothly with two coats of sealer applied and finished with two coats of polyurethane / melamine ( glossy/matt finish) in teak finish.

Supplying Godrej elaptop pro Safe Locker

Teak wood framed Wooden Table of size 90x45x90cm with double drawer for all rooms (writing table) duly finished of Teak wood frame as per the design provided. Wood surface shall be sanded smoothly with two coats of sealer applied and finished with two coats of polyurethane / melamine ( glossy/matt finish) in teak finish

Teak wood framed with 12mm thick Planic glass top Teapoy Circular shape of size 60cm dia for all rooms duly finished of Teak wood as per the design provided . Wood surface shall be sanded smoothly with two coats of sealer applied and finished with two coats of polyurethane / melamine ( glossy/matt finish) in teak or mahogany finish ect. complete as per drawing and directions of deptl. Engineers at site, including cost of all materials, all loading and unloading charges, all conveyance etc.

Supply of Teak Wood framed sofa double seated (Buket Type) as per design including Wood surface shall be sanded smoothly and two coats of sealer applied and finished with two coats of polyurethane melamine (glossy/matt finish) polish, all loading and unloading charges, all conveyance etc as Directed by Departmental Engineers.

Supplying and fixing Teak wood (planks of 12mm thick to 20mm thick) Wardrobe of size 45cm width and ceiling height to all rooms. This wardrobe includes 2 compartments 1.20m or nearest width for keeping Cloths and luggage, and remaining 0.70m for Coffee making etc. complete as per the design and directions of Deptl. officers at site including cost of SS 15mm towel Rod of 1.20m, Granite slab for Coffee making place, 12mm Glass Pan for Racks in coffee making compartment, 75mm Brass butt hinges for shutters, Brass Handles, Knob, Locks, Mirror on one shutter, polishing with melamine polish two or more coats to smooth finish ,cost and conveyance of all materials ,all labour charges etc.

Supplying Second class Teak wood framed Cot (2.00x1.20m or nearest size) with head board of 30cm height without leg board using the vertical post of size 70x70mm, Horizontal frame with 50x120mm , Head board top 35x10mm. bottom with 35x50mm, inside head board with 12mm planks, inside top support 2nos with 50x70mm, top covered with 9mm Marine ply including French spirit polish two coats after sand papering and cleaning the surface, cost of nail and adhesives, all labour charges, all conveyance etc.complete.

Supplying Double Wooden Bunk Bed using second class teak wood frame with 9mm marine ply of 198cm long, 88cm breadth and 170cm height (length and breadth suitable for 78x188cm size mattress) or nearest size using with vertical post of 70x70mm necessary carving works to good look, horizontals of size 50x100mm all-around, head board top with 35x100mm, providing both leg and head board verticals of round shaped at 10cm C/C, necessary wooden ladder, Top protection works using with 25x50mm planks fixed with nails and adhesive including polishing with French Spirit two coats etc. complete as per drawing and directions of Engineers at site

Supplying duroflex / sleepwell or approved equivalent pocketed spring mattress with superior quality foam, fabric, spring with proper edge support, tempering, border etc with a minimum warranty of one year(210 x 180 x 25cm or nearest size to suite the Bed)

Supplying duroflex/ sleepwell or approved equivalent pillows

Supplying Main Curtain fabrics of approved make and design as per the directions of Engineer in charge. (Basic Rate shall not be less than Rs.200/m)

Supplying Shear Curtain fabrics of approved make and design as per the directions of Engineer in charge. (Basic Rate shall not be less than Rs.150/m)

Supplying Blackout Curtain fabrics of approved make and design as per the directions of Engineer in charge. (Basic Rate shall not be less than Rs.120/m)

Stitching and fixing in to position i-lite curtains using 304 grade SS tubes of 25mm dia with SS caps/finals, SS hooks, SS i-lite rings of approved design on both side hydraulically pressed in to fabric (including blackout) including transportation, all material cost, stitching charges, labour charges, accessories etc. complete. (Rate excluding cost of Fabric)- length of drapery rod considered for payment purpose only.

Stitching and fixing pleated shear curtains in to position using M-Track of Heavy duty aluminium section of approved design and size .Rate including transportation, all material cost, stitching charges, labour charges, cost of M track and accessories etc. complete. (Rate excluding cost of Fabric)- length of M-track considered for payment purpose only.

Providing wall paper to wall as per the architectural drawing and directions of the Deptl.officers at site.

APP-I- Kitchen Equipment

Supplying and fixing 4 Tier RACK of O.A.S (120 x 70 x 190 cm) having four stainless steel perforated racks of 18G stainless steel, double bedded on all sides,suitable stainless steel channels for under support, stainless steel square legs of cross section (40x40 mm), a minimum of 20cm floor clearance etc and complete

Supplying and fixing 2 SINK UNIT of O.A.S (180 x 70 x 85+10 cm) having 10cm splash back, two elbow operated taps, both sinks of size (50 x 50 x 25 cm) , 1.5" dia stainless steel drain outlet with valves, one under shelf at 20cm height, adjustable nylon bullet legs etc and complete

Supplying and fixing WORK TABLE with 8 inch splash back lengthwise of O.A.S(150 X 70 X 85 + 10 CM) with one under shelf. having 16G stainless steel top, 10cm splash back, 35x35x3mm thick stainless steel angle frame, with sound deadening, one 18G stainless steel under shelf, 16G stainless steel pipe legs with adjustable nylon bullets, 20cm clearance from the floor etc and complete

Supplying and fixing 2 SINK UNIT (120 x 70 x 85+10 cm)having 10cm splash back, two elbow operated taps, both sinks of size (45x45x30 cms), 1.5" dia stainless steel drain outlet with valves, one under shelf at 20cm height, adjustable nylon bullet legs etc and complete

Supplying WORK TABLE with 8 inch splash back lengthwise of O.A.S(120 X 70 X 85 + 10 CM) with attachment of One under shelf. having 16G stainless steel top, 10cm splash back, 35x35x3mm thick stainless steel angle frame, with sound deadening, one 18G stainless steel under shelf, 16G stainless steel pipe legs with adjustable nylon bullets, 20cm clearance from the floor etc and complete

Supplying S S SINK of O.A.S(80 x 70 x 85+10 cm),Sink size(65 x 55 x 25 cm) having 10cm splash back, two elbow operated taps, 1.5" dia stainless steel drain outlet with valves, one under shelf at 20cm height, adjustable nylon bullet legs etc and complete

Supplying WORK TABLE of O.A.S(120 X 70 X 85 + 15 CM) with attachment of One under shelf. having 16G stainless steel top, 10cm splash back, 35x35x3mm thick stainless steel angle frame, with sound deadening, one 18G stainless steel under shelf, 16G stainless steel pipe legs with adjustable nylon bullets, 20cm clearance from the floor etc and complete

Supplying WORK TABLE of O.A.S(160 X 70 X 85 + 10 CM) with one under shelf. having 16G stainless steel top, 10cm splash back, 35x35x3mm thick stainless steel angle frame, with sound deadening, one 18G stainless steel under shelf, 16G stainless steel pipe legs with adjustable nylon bullets, 20cm clearance from the floor etc and complete .

Supplying BAIN MARIE COUNTER of O.A.S(200 X (70 + 30) X 85 CM) having 4 Nos of 0.5 and 1 no of 1/1 size vessels having one underself with sliding door, having thermostatically controlled heating elements, two over head racks with plate warmer on the bottom side of top shelf, shelf made of 18G stainless steel sheet, racks supported with 25mm stainless steel pipes, shelves with one 1/1 GN pans ie; rectangular vessel of size (53*32.5*15 cms) with lids and six nos of 1/2 GN pans i.e; rectangular vessels of size (32.5*26.5*15 cms) with lids having electric heater for chamber on the sides with controls on front side water inlet and out lets with control valves etc and complete

Supplying SS GARBAGE BIN WITH HINGED LID with 120 Litre Capacity. The cylindrical bin shall made of 304 grade stainless steel of 18G thickness. The base of the bin shall be fixed on a stainless steel ring of suitable thickness not less than 14G to have a ground clearance of 7.5cm for base. The bin shall have foldable handles on sides. All edges shall be rounded to avoid sharp edges and pleasent appearence. (The sample shall be got approved before effecting the full supply

Supplying 4 Tier RACK of O.A.S(250 x 70 x 190 cm) having four stainless steel perforated racks of 18G stainless steel, double bedded on all sides, suitable stainless steel channels for under support, stainless steel square legs of cross section (40x40 mm), a minimum of 20cm floor clearance etc and complete

Supplying and fixing 4 Tier RACK of O.A.S(260 x 70 x 190 cm) having four stainless steel perforated racks of 18G stainless steel, double bedded on all sides, suitable stainless steel channels for under support, stainless steel square legs of cross section (40x40 mm), a minimum of 20cm floor clearance etc complete

Supplying 3 BURNER RANGE of O.A.S(200 X 80 X 85 CM) having top panel, side panel and spill trays made of 16 G stainless steel sheets, two high pressure (T –35) chineese burners on eigther sides and one (G-35) burner in the centre, pigtails, stainless steel tube chinese grid, necessary tap over the burners, 16 G stainless steel legs wuth adjustable nylon bullets, 20 cm clearance from the floor etc complete

Supplying HOT PLATE of O.A.S(120 X 80 X 85 + 10CM) having 16 mm thick smooth griddle MS plate of size (100x60)cms and four numbers of 450 mm V burners, control valve (united) on front side, full length grease collecting tray,18G stainless steel collecting drawers, ignition window, gas intlet on both sides. Legs shall be with 38 mm stainless steel pipe and adjustable nylon bullet ends. 16G stainless steel under shelf double bedded on all sides, both sides and rear panels of 18G stainless steel sheets, having sufficient air ventilation etc and complete

Supplying BULK COOKING RANGE of O.A.S(60 X 60 X 50 CM) is fitted with One No.H.P Burner having 16G Stainless Steel 304 grade top panel, double bedded on all sides, having structural Stainless Steel angle frame control panel on the front, 18G spillage tray just below the burner, side panels (with air vents) of 20G Stainless Steel sheets, 16G Stainless Steel pipe legs with adjustable nylon bullets, 10cm clearance from the floor etc and complete.

Fabrication and erection of Kitchen Hood using 22 SWG SS Sheet and filters with 26SWG SS Sheet etc. complete including G.I. Ducting<br>using 24 SWG G.I. Sheet. (Upto Just Outside the wall ) for 135x85 cm (2 Burner)

Fabrication and erection of Kitchen Hood using 22 SWG SS Sheet and filters with 26SWG SS Sheet etc. complete including G.I. Ducting<br>using 24 SWG G.I. Sheet. (Upto Just Outside the wall ) for 75x75 cm (Bulk)

Fabrication and erection of Kitchen Hood using 22 SWG SS Sheet and filters with 26SWG SS Sheet etc. complete including G.I. Ducting<br>using 24 SWG G.I. Sheet. (Upto Just Outside the wall ) for 215x95 cm (3 Burner)

Fabrication and erection of Kitchen Hood using 22 SWG SS Sheet and filters with 26SWG SS Sheet including G.I. Ducting<br>using 24 SWG G.I. Sheet. (Upto Just Outside the wall ) etc. complete for 135x95 cm (Hot Plate)

Supply and providing 4 Door Vertical Chiller of dimensions 1500mm X 800 mm X 1900 mm size with exterior made of 22 SWG SS Sheet, interior made of 24 SWG SS sheet with Puff insulation.

Supply and providing Salamander Slicer of 700 mm ×500 mm×350 mm or nearest size with 2000 W Heating coil, On-Off switch, Thermostat, Indicator Lamps etc. The salamander shall have a capacity of 8 slices and shall operate on 240 V Single Phase AC Supply

Supply and providing Water Boiler of 20 litre capacity with 2000 W Heating coil, On-Off switch, Thermostat, Indicator Lamps etc. The water boiler shall operate on 240 V Single Phase AC Supply

Supply and providing Milk Boiler of 20 litre capacity with 2000 W Heating coil, On-Off switch, Thermostat, Indicator Lamps etc. The water boiler shall operate on 240 V Single Phase AC Supply

Supply and providing Side Open Freezer with Worktop of dimensions 1700 mm X 700 mm X 850 mm size or nearest with exterior made of 22 SWG SS Sheet, interior made of 24 SWG SS sheet with Puff insulation and capacity not less than 350 Litres. The Compressor shall be made of Kirloskar or equivalent reputed brand. The chiller shall be operated on single phase 240 V AC supply with a power rating of 750W

Supply and providing Sand witch Grilles (Single) with 3000 W Heating coil, On-Off switch, Thermostat, Indicator Lamps etc. The salamander shall have a capacity of 4 slices and shall operate on 240 V Single Phase AC Supply

Supply and providing Glue based Insect-O-Cutor with necessary components like insect attracting tube light having minimum 9000 hours life and working on 240V, 50 Hz AC supply including all wall/ceiling mounting accessories etc. complete.

Supply and installation of reputed make automatic hood type dish washing machine having wash, rinse and dryer complete in all respects

Cooking Gas System As per the specification B.I.S.6044 (part - 1) 1972,having 8 cylinders (4+4) Manifolding system with D.B.C. Click on adapter, H.P. regulator, regulator connector, shut off valves, unit valves, with frame connector

Supply and fixing LPG gas line using MS “C” class pipe of dia 15mm (TATA/JINDAL) including all necessary specials, clamping of pipe, welding, painting etc and complete as per the standards

Supplying and fixing One side copper pigtail for LPG line etc. complete.

Supplying and fixing Copper Gas Needle Control Valve for LPG line etc. complete.

Supplying and fixing Copper main line valve for LPG line etc. complete.

Supplying and fixing Copper pin Set for LPG line etc .complete.

Supplying and fixing Copper Block Nut LPG line etc. complete.

Supplying and fixing Copper Cylinder pigtail LPG line etc. complete

Supplying and fixing Brass Ball Valve for LPG line etc. complete.

Supplying LPG Gas Regulator

APPENDIX-K -RAINWATER HARVESTING

Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Centering and shuttering including strutting, etc. and removal of form for:Arches, domes, vaults up to 6m span

Centering and shuttering including strutting, etc. and removal of form for:Extra for arches, domes, vaults exceeding 6 m span

12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand)

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface: Water thinnable cement primer

Finishing walls with Acrylic Smooth exterior paint of required shade: New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 m dia 4 Kgf/cm2 - External work - Exposed on wall

Providing and fixing PVC pipes includes joints of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in CHarge. 110 mm dia 4 Kg/cm2

Providing and fixing PVC pipes includings jointing of pipes with one step pvc solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer in Charge. 150 mm dia 6 Kgf/cm2

Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes including jointing with PVC solvent cement 110x110x110 mm dia Tee

Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 150x150x110 mm dia Reducer Tee

Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia Elbow

Providing and fixing PVC moulded fittings / accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia 45 degree Elbow

Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110x110x110 mm dia Door tee

Providing fitter net and filter media to the filter unit first layer up 20 cm with gravel , 2nd layer 25 cm with sand, third layer 20 cm with charcoal and fourth layer 20 cm with gravel etc completed including all cost conveyance and all materials

Providing and fixing 160mm Dia Gutter (half round) reducer tee (160x160x110mm) etc. complete

Providing and fixing 160mm dia Gutter pipe heavy (Half round ) with flat iron brackets 50x3mm size with necessary bolts, nuts and washers , all scaffolding charges etc Complete as per the directions of Engineers at site.

App-L- Providing Bio Gas Plant and Incinerator

Supply and Installation of 5 cu.m (50 kg) capacity portable bio gas plant of water jacket model made of FRP with floating drum and a double burner stove for processing capacity of 40 to 50 kg solid bio waste. The rare including of all cost conveyance and labour charges for loading, unloading, Installation charges fittings etc completed

Supplying fabricating and fixing (Mild steel cover with fire bricks and glass wool) Solid waste Incinerator of capacity 50kg/day etc. complete as per the directions of the Engineers at site.

App-M - Wiring and Accessories

Supply and laying medium gauge PVC conduit of the following sizes conforming to IS 9537/1983 Part III in roof slab, jointing the pipes with PVC solvent cement, tying & fixing the conduit firmly with the reinforcement etc. as required. 20 mm

Supply and laying medium gauge PVC conduit of the following sizes conforming to IS 9537/1983 Part III in roof slab, jointing the pipes with PVC solvent cement, tying & fixing the conduit firmly with the reinforcement etc. as required.25 mm

Supply and wiring points according to IS 732-1989 through the existing conduit with 1.00 sq mmFR PVC insulated stranded single core copper conductor cable 650V grade, 1.5sqmm green coloured FR wire for earth, required qty of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6 A modular type ROHS compliant SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. <br>single control light point without ceiling rose short point

Supply and wiring points according to IS 732-1989 using rigid PVC ivory conduit of minimum size 20 mm conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed 5suitably and with 1.00 sq mm PVC in6sulated stranded single core FR cop7per conductor cable 650V grad8e,including providing switch board9 main ,and continuous earthin10g with 1.5sqmm green coloured 11FR wire , required qty of copper eart12h socket, brass bolt and nut crimp13ing etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6 A modular typeROHS compliant SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. <br> <br>Single control light point without ceiling rose Medium point

Supply and wiring points according to IS 732-1989 using rigid PVC ivory conduit of minimum size 20 mm conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm PVC insulated stranded single core FR copper conductor cable 650V grade,including providing switch board main ,and continuous earthing with 1.5sqmm green coloured FR wire , required qty of copper earth socket, brass bolt and nut crimping etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6 A modular typeROHS compliant SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required.<br><br>Double control light and fan point without ceiling rose short point

Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm PVC insulated stranded single core FR copper conductor cable 650V grade,including providing switch board main ,and continuous earthing with 1.5sqmm green coloured FR wire , required qty of copper earth socket, brass bolt and nut crimping etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6 A modular typeROHS compliant SP switchesand making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required.<br> <br> Combined plug point with 6A,5 pin plug socket controlled by 6A switch in the same switch board as that light point

Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm PVC insulated stranded single core FR copper conductor cable 650V grade,including providing switch board main ,and continuous earthing with 1.5sqmm green coloured FR wire , required qty of copper earth socket, brass bolt and nut crimping etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6 A modular typeROHS compliant SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required.<br>Independent plug point

od261957/2020_2021 Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm PVC insulated stranded single core FR copper conductor cable 650V grade,including providing switch board main ,and continuous earthing with 1.5sqmm green coloured FR wire , required qty of copper earth socket, brass bolt and nut crimping etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6 A modular typeROHS compliant SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. <br>2 light points controlled by 1 number one way switch(Medium point)

Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm PVC insulated stranded single core FR copper conductor cable 650V grade,including providing switch board main ,and continuous earthing with 1.5sqmm green coloured FR wire , required qty of copper earth socket, brass bolt and nut crimping etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6 A modular typeROHS compliant SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required.<br>3 lights controlled by 1 number one way switch(Medium point)

Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm PVC insulated stranded single core FR copper conductor cable 650V grade,including providing switch board main ,and continuous earthing with 1.5sqmm green coloured FR wire , required qty of copper earth socket, brass bolt and nut crimping etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6 A modular typeROHS compliant SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required.<br>4 lights controlled by 1 number one way switch(Medium point)

Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mmPVC insulated stranded single core FR copper conductor cable 650V grade,including providing switch board main ,and continuous earthing with 1.5sqmm green coloured FR wire , required qty of copper earth socket, brass bolt and nut crimping etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6 A modular typeROHS compliant SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required.<br>Bell point without ceiling rose- short point

Supply,Conveayance,Installation,Testing and commissioning of 20W 4 feet LED PC Batten with decorative end cap light Fitting (LGLZPCO20XC Jaguar make or equivalent) (Staff quarters,main block stair Kitchen,pump house and electrical room etc )

Supply,Conveayance,Installation,Testing and commissioning of recess mounting round 50W 6500K LED Fitting (LERSO5R050XC Jaguar make or equivalent) (Out side Top )

Supply,Conveayance,Installation,Testing and commissioning of recess mounting round 30W 6500K LED Fitting (LETS36RO30XC Jaguar make or equivalent) (Main Lobby Double Height )

Supply,Conveayance,Installation,Testing and commissioning of recess mounting round 12W 6500K LED Fitting (LNRO01RO12XC Jaguar make or equivalent) (Restaurant and Coffee Shop )

Supply,Conveayance,Installation,Testing and commissioning of recess mounting round 9W 6500K LED Fitting (LNRO01R009XC Jaguar make or equivalent) (Passages,Lobby and waiting area)

Supply,Conveayance,Installation,Testing and commissioning of recess mounting round 6W 6500K LED Fitting (LNEPOIR006XC Jaguar make or equivalent) (Toilet and bed rooms)

Supply,Conveayance,Installation,Testing and commissioning of recess mounting round 6W 6500K LED Fitting (LNEPOIR006XC Jaguar make or equivalent) (Toilet and bed rooms)

Supply,Installation and testing of Mirror lamp fitting with 5W LED tube (Wipro make or equivalent

Supply and installation of decorative type wall light fitting (Make-Philips, Model-Stylo wall light or equivalent) at site

Supply and installation of bed side wall lights (Make- Philips, Model No.31437 or equivalent) of good quality at saite

Supply & providing of 4.8W/m LED strip light of IP20 grade including suitable<br>driver for use on 230V AC supply including all accessories required for fixing etc.complete of good quality and approved make in the existing coves including twin<br>twisted plastic wire for lead interconnection etc complete

Supply,Conveayance,Installation,Testing and commissioning of Surface mounting round 18W 6500K LED Spot light Fitting (LNRO02RO18SCJaguar make or equivalent) (Open restaurant and open Terrace )

Supplying and fixing PVC batten/ angle holder including connection etc. as required.

Supply and fixing of 5W LED bulb in the existing batten holder and Bulkhead fittings

Supply and installation of suitable size MS rod type fan clamp in the RCC slab as per IS 732 as required

Charges for cutting holes suitable for accommodating exhaust fans up to 305mm sweep including plastering colour washing etc. as required

Supply,convayance,installation,Testing and commissioning of ceiling fans of the following sizes using standared accessories excluding resistance type regulator wiring the down rod with 16/0.20mm PVC insulated and PVC sheathed 6950/1100V grade 3 core round copper conductor flex wire or with exttended original wiring etc as required <br>1200mm sweep ceiling fan complete with 300mm down rod.canapies,shackles and blades etc working on 230/240V single phase A/C for Department approved quality

Supply,installation,testing and commissioning of 305 mm light duty Exhaust fan working on 230V single phase AC supply of good quality and approved make to the existing opening making good damages with 3cx1.5sqmm FR PVC insulated copper conductor flexible cable etc as required

Supply,installation,testing and commissioning of 130mm light duty Exhaust fan working on 230V single phase AC supply of good quality and approved make to the existing opening /False ceiling making good damageswith 3cx1.5sqmm FR PVC insulated copper conductor flexible cable etc as required

Supply and fixing the following types of superior quality 250V A.C call bell on existing M.S. box and giving connections with required length of 3 core, 16 / 0.20mm 650/1100V grade PVC insulated and PVC sheathed round copper conductor flex wire conforming to relevant ISS or with the extended original wiring, earthing the MS box and making good the surface as required.Ding dong bell

Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recessincluding cutting the wall and making good the same in case of recessed conduit as required20 mm

Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required25 mm

Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required32 mm

Supply and drawing 650/1100 V grade FRLS PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.1.00 sq.mm 2 Run

Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required2X2.5 sq.mm+1X2.5 sq.mm earth wire

Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required2x4 sq.mm + 1x4 sq.mm earth wire

Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required4 X 2.5 sq. mm + 2 X 2.5 sq. mm earth wire

Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required4 X 4 sq. mm + 2 X 4 sq. mm earth wire

Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required4 X 6 sq. mm + 2 X 6 sq. mm earth wire

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated,shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/recessed steel/ PVC conduit as required

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm)

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm)

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.4 Module (125mmX75mm)

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.6 Module (200mmX75mm)

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.8 Module (125mmX125mm)

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.1 or 2 Module

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. asrequired.3 Module

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.4 Module

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.6 Module

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.8 Module

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet

Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )25A SP switch with indicator

Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )6A universal socket

Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )Step Fan regulator - type 2 M

Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )25A 3pin Shuttered socket

Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required4 way (8+12) - three phase double cover (IP 42/43)

Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required6 way (8+18) - three phase double cover (IP 42/43)

Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required4 way (8+12) - double cover TPN vertical DB with provision for fixing MCCB as incomer and SP/ TP MCB as outgoing (IP 42/43)

Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required6 way (8+12) - double cover TPN vertical DB with provision for fixing MCCB as incomer and SP/ TP MCB as outgoing (IP 42/43)

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator8 way, Double door

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator6 way, Double door

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole and netural

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps

Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residualcurrent circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps

Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residualcurrent circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

Supplying and fixing 20 amps 415volts, TPN industrial type, socket outlet, with 4 pole and earth, metal enclosed plug top along with 20 amps "C" curve, TPMCB, in sheet enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required

Supplying and fixing 30 amps, 415 volts, TPN industrial type, socket outlet, with 4 pole and earth,metal enclosed plug top alongwith 30 amps "C" curve, TPMCB, in sheet steel enclosure, onsurface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required

App-N-HT Portion

RMU Unit-Supply, Erection, testing and Commissioning of 11KV,630A,30KA, Electrical & Manual operated, compact, Outdoor, Extensible CCV(2Nos, Load Break Switch(OD) incomer and 1No. Fixed type manual & Electrical operated VCB with retrofitable facility of Automation.The scope includes testing at manufacturer premises transportation,unloading,testing at site as per authorities requirements and installation at side including providing all necessarry civil foundation works fencing providing jelly inside fenced area etc complete as per KSEB & Electrical Inspectorate requirements<br

Supply, Installation, Testing and Commissioning of 3 phase 11kV/433V 500 kVA Transformer ONAN with OLTC

Supply,Installation ,Testing & commissioning of 11kV Outdoor Load Break Switch Metering panel with HRC Fuses, CT-PT unit 0.5s class 3CT type and TOD meter.(including CT-PT unit & TOD meter testing from authorities).The scope includes testing at maufacturer premises,transportation,unloading and erection at site with required civil foundation work etc complete.<br>

Supply,Installation ,Testing & commissioning of Neutral CT 150,5A,Cl-5p10 in suitable metal enclosure with proper treatment and painting(including CT testing from authorities)<br>

Supply,conveyance of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade <br> 300 sq. mm

Supplying and making outdoor cable end termination with heat shrinkable jointing kit completewith all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductorcable of 11 KV grade as required :300 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade offollowing size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 120 sq. mm and upto 400 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade offollowing size in the existing RCC/ HUME/ METAL pipe as required.Above 120 sq. mm and upto 400 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade offollowing size in the existing masonry open duct as required.Above 120 sq. mm and upto 400 sq. mm

Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required:300 sq. mm

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providingmasonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/ coke and salt ) as required.

Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench120/102.5 mm or nearest size

Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench125/109 mm or nearest size

Supply and clamping the following size of strips on surface of wall/ parapet/ existing cable tray using clamps fabricated from 20 X 3 mm GI flat duly painted or heavy duty GI spacer saddles spacing of clamps not exceeding 1 m, making good the damages, colour washing etc. as required ( for horizontal run)25 x 3 mm GI strip

App-O-LT Panels, Cables and earthing

Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623.<br>Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 2.00mm CRCA sheet, powder coated (excluding base frame

Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623.<br>Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)

Supply and providing 2mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc

Supply and providing heavy duty 'A' section neoprene gasket in the panel boardA' section neoprene beeding suitable for 1.60/ 2.00 mm sheet

Supply and fabrication conveyance and installation of base frame of panel board using 75 x 40 mm rolled steel channel (ISMC)

Supply and providing copper bus bars including finger type SMC bus bar supports in the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. as required.

Supply and providing copper earth bus in the panel board

null1000 A, 4 pole, manual draw out type, microprocessor based ACB with overload , instantaneous SC , delayed SC and ground fault protection 50kA

Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.630A, 70 kA (Ics=100%Icu), 4 pole, current limiting type MCCB with microprocessor based release with overload setting of 50 - 100% having adjustable OL & SC

Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.400A, 70 kA (Ics=100%Icu), 4 pole, current limiting type MCCB with microprocessor based release with overload setting of 50 - 100% having adjustable OL & SC

Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.320A/400A, 50/55 kA (Ics=100%Icu), 4 pole, current limiting type MCCB with microprocessor based release with overload setting of 50 - 100% having adjustable OL & SC

Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.200A, 35/36 kA (Ics=100%Icu), 4 pole, current limiting type MCCB with microprocessor based release with overload setting of 50 - 100% having adjustable OL & SC

Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.160A, 35/36 kA (Ics=100%Icu), 4 pole, current limiting type MCCB with microprocessor based release with overload setting of 50 - 100% having adjustable OL & SC

Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.125A, 35/36 kA (Ics=100%Icu), 4 pole, current limiting type MCCB with microprocessor based release with overload setting of 50 - 100% having adjustable OL & SC

Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.16 A-100A, 16 kA (Ics=100%Icu), 4 pole, current limiting type MCCB having thermal setting range of 80 - 100% with thermal magnetic release having adjustable OL

MCCB AccessoriesSupply and fixing CBCT suitable for 630 - 800A earth fault module

MCCB AccessoriesSupply and fixing auxiliary switch (1 NO + 1 NC) in the existing MCCB of rating up to 630 A.

MCCB AccessoriesSupply and fixing auxiliary switch + alarm switch (1 NO + 1 NC & 1 NO) in the existing MCCB of rating up to 630A.

MCCB AccessoriesSupply and fixing one number under voltage release for all voltage range up to 630A MCCB.

MCCB AccessoriesSupply and fixing shunt release for all voltage range up to 630A.

MCCB AccessoriesSupply and fixing rotary handle, External type (including BUC handle with door interlock ) in the existing MCCB of rating up to 250 A

MCCB AccessoriesSupply and fixing rotary handle, External type (including BUC handle with door interlock ) in the existing MCCB of rating up to 315-630 A

Supply and providing 600/ 5 A, 5 VA, 10 P 5, tape wound protection CT class 0.5 in the panel board

Supply and providing 400/ 5 A, 5 VA, 10 P 5, tape wound protection CT class 0.5 in the panel board

Supply and providing 160/ 5 A, 5 VA, 10 P 5, tape wound protection CT class 0.5 in the panel board

Supply and providing 125/ 5 A, 5 VA, 10 P 5, tape wound protection CT class 0.5 in the panel board

Supply and providing 100/ 5 A, 5 VA, 10 P 5, tape wound protection CT class 0.5 in the panel board

Supply and providing 200/ 5 A, 5 VA, 10 P 5, tape wound protection CT class 0.5 in the panel board

Surge Protection Device: Class B & Class C/ Class 1 & Class 2 Tested as per IEC 61643 Part 11:2011 . Nominal voltage -230V 50/60Hz, MCOV of 275 V , Total Impulse current-100 KA (10/350µ sec) & Total Max Discharge current 400KA (8/20µ sec), Voltage protection level <1.3 kV & Residual Voltage @ 5 kA(8/20) <0.8 kV . The Surge Protection Devices should have TOV withstand for 120 Min : 438 V and with out Follow Current & Leakage Current. . Short- Circuit Current rating (Isccr) – 25 kA/50 Hz . Back up fuse required for more than 250AgG/gL. Health Status Indication required in all catridge. Total Responsetime <25 nano sec

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

Enameled Danger Notice board of size 100x75mm with inspections(Both in English and malayalam) and conventional Skull and born in red colour

Supply and fixing Digital multifunction meter to read V,A,F,PF,3 phase accuracy class -1

Supply,installation and testing of LED indicator for all voltage range with Green/red/Yellow colour s

Supply,installation and testing of LED indicator for all voltage range with Blue colour

Supply and fixing up to 20A 230/415V Backlite fuse base with fuse link

Supply and laying of one number additional PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in ground in the same trench in one tier horizontal formation including widening the trench by 20 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil)3.5 core 50 sq mm

Supply and laying of one number additional PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in ground in the same trench in one tier horizontal formation including widening the trench by 20 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil)3.5 core 150 sq mm

Supply and laying of one number additional PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in ground in the same trench in one tier horizontal formation including widening the trench by 20 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil)3.5 core 70 sq mm

Supply and laying of one number additional PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in ground in the same trench in one tier horizontal formation including widening the trench by 20 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil)3.5 core 95 sq mm

Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.3.5 core 50 sq mm

Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.3.5 core 70 sq mm

Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.3.5 core 95 sq mm

Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.3.5 core 150 sq mm

Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.3.5 core 400 sq mm

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 50 sq mm with factory made clamp

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.2 core 70 sq mm

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.2 core 95 sq mm

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 150 sq mm

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 400 sq mm

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 25 sq mm with factory made clamp

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 35 sq mm with factory made clamp

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 240 sq mm

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 4 sq mm with factory made clamp

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 6 sq mm with factory made clamp

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 10 sq mm with factory made clamp

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 16 sq mm with factory made clamp

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X25 sq.mm (28mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 35 sq. mm (32mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 50 sq. mm (35mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 70 sq. mm (38mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 95 sq. mm (45mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 150 sq. mm (50mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 240 sq. mm (62mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 400 sq. mm (82mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, andproviding masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supply and clamping the following size of strips on surface of wall/ parapet/ existing cable tray using clamps fabricated from 20 X 3 mm GI flat duly painted or heavy duty GI spacer saddles spacing of clamps not exceeding 1 m, making good the damages, colour washing etc. as required ( for horizontal run)25 x 3 mm copper strip

Supply and clamping the following size of strips on surface of wall/ parapet/ existing cable tray using clamps fabricated from 20 X 3 mm GI flat duly painted or heavy duty GI spacer saddles spacing of clamps not exceeding 1 m, making good the damages, colour washing etc. as required ( for horizontal run)25 x 6 mm copper strip

Supply and clamping the following sizes of strips on surface of wall / parapet/ existing cable tray using clamps fabricated from 20 x3 mm GI flat duly painted or heavy duty GI spacer saddles, spacing of clamps not exceeding 1 m , making good the damages, colour washing etc. as required ( for vertical run).25 x 3 mm copper strip

Supply and clamping the following sizes of strips on surface of wall / parapet/ existing cable tray using clamps fabricated from 20 x3 mm GI flat duly painted or heavy duty GI spacer saddles, spacing of clamps not exceeding 1 m , making good the damages, colour washing etc. as required ( for vertical run).25 x 6 mm copper strip

Supply and clamping the following size of strips on surface of wall/ parapet/ existing cable tray usingclamps fabricated from 20 X 3 mm GI flat duly painted or heavy duty GI spacer saddles spacing of clamps not exceeding 1 m, making good the damages, colour washing etc. as required ( for horizontal run)20 x 3 mm copper strip

Supply and clamping the following sizes of strips on surface of wall / parapet/ existing cable tray using clamps fabricated from 20 x3 mm GI flat duly painted or heavy duty GI spacer saddles, spacing of clamps not exceeding 1 m , making good the damages, colour washing etc. as required ( for vertical run).20 x 3 mm copper strip

Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.00 mm copper conductor ( 14 SWG)

Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.65 mm copper conductor (12 SWG

Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and givingconnection as required3.15 mm copper conductor ( 10 SWG

Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.00 mm (14 SWG)

Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.65 mm (12 SWG

Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)

Supply and laying of the following sizes of B class GI pipe laid 0.6 m below ground level including excavating trench of suitable size and refilling etc, as required.32 mm dia G.I pipe ( medium class)

Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation110/94 mm or nearest size

Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation125/109 mm or nearest size

Supply and laying of the following sizes of B class GI pipe laid 0.6 m below ground level including excavating trench of suitable size and refilling etc, as required.15.mm dia. G.I pipe ( medium class)

Painting letters or figures of the following sizes with enamel paint as identification mark to SB, DB, panel board etc as required<br>2.5cm/4cm or 5cm height

Supply and providing the following sizes of bolt and nut with washers on the existing MS box / earth bus etc. as required including drilling necessary holes as required<br>25 x 3 mm brass bolt & nut

Supply and providing the following sizes of bolt and nut with washers on the existing MS box / earth bus etc. as required including drilling necessary holes as required<br>25 x 6 mm brass bolt & nut

App-P-APFC Panel & Capacitors

Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623.<br>Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 2.00mm CRCA sheet, powder coated (excluding base frame)

Supply and providing 2mm SMC sheet as shrouding for bus interconnection / terminations etc. includingrequired nut & bolt etc.

Supply and providing heavy duty 'A' section neoprene gasket in the panel boardA' section neoprene beeding suitable for 1.60/ 2.00 mm sheet

Supply and fabrication conveyance and installation of base frame of panel board using 75 x 40 mm rolled steel channel (ISMC)

Supply and providing copper bus bars including finger type SMC bus bar supports in the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. as required.

Supply and providing copper earth bus in the panel board

Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.16 A-100A, 16 kA (Ics=100%Icu), 4 pole, current limiting type MCCB having thermal setting range of 80 - 100% with thermal magnetic release having adjustable OL

Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.320A/400A, 50/55 kA (Ics=100%Icu), 4 pole, current limiting type MCCB with microprocessor based release with overload setting of 50 - 100% having adjustable OL & SC

MCCB AccessoriesSupply and fixing rotary handle, External type (including BUC handle with door interlock ) in the existing MCCB of rating up to 315-630 A

MCCB AccessoriesSupply and fixing rotary handle, External type (including BUC handle with door interlock ) in the existing MCCB of rating up to 250 A

Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.12.5 KVAr, 3 phase, 440 V, Metalised Poly Propylene Heavy duty Cylindrical Gas filled Capacitor suitable for APFC panel without block reactor

Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.25 KVAr, 3 phase, 440 V, Metalised Poly Propylene Heavy duty Cylindrical Gas filled Capacitor suitable for APFC panel without block reactor

Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.12.5 KVAr, 3 phase, 520 V, Metalised Poly Propylene Heavy duty Cylindrical Gas filled Capacitor suitable for APFC panel with block reactor

Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.25 KVAr, 3 phase, 520 V, Metalised Poly Propylene Heavy duty Cylindrical Gas filled Capacitor suitable for APFC panel with block reactor.

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 185 sq mm

Supplying and making outdoor end termination with cast resin compound including aluminiumlugs and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 185 sq. mm

Enameled Danger Notice board of size 100x75mm with inspections(Both in English and malayalam) and conventional Skull and born in red colour

Supply,installation and testing of LED indicator for all voltage range with Blue colour

Supply and fixing up to 20A 230/415V Backlite fuse base with fuse link

Supply,installation and testing of LED indicator for all voltage range with Green/red/Yellow colour

supply,installation and testing of 3 phase multi function to read w,Wh,Pf or va,varh accuracy class 0.5

Supply and fixing Digital multifunction meter to read V,A,F,PF,3 phase accuracy class -1

Supply and providing 320/ 5 A, 5 VA, 10 P 5, tape wound protection CT class 0.5 in the panel board

Providing and fixing12 stage, 440/ 110 V, 5 A/ 1 A intelligent power factor controller.<br

Illuminated flush head actuator - Red with legend "ON" with 1 NO contact.

Illuminated flush head actuator - Green with legend "OFF" with 1 NO contact.

Three pole capacitor duty contactors for switching capacitor banks of 16 to 25 KVAr rating with AC coil and 1 NO contact.

Three pole capacitor duty contactors for switching capacitor banks of 11 to 15 KVAr rating with AC coil and 1 NO contact.

Supply and wiring with 650/1100 V grade PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 for interconnecting the control devices/ equipments including providing suitable size sockets at the termination points, keeping the wiring firm by suitable tie/ tie mounts/ PVC duct etc as required.<br>10.00 sq mm single run without sockets.

Supply and wiring with 650/1100 V grade PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 for interconnecting the control devices/ equipments including providing suitable size sockets at the termination points, keeping the wiring firm by suitable tie/ tie mounts/ PVC duct etc as required.<br>6.00 sq mm single run without sockets

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

Supply of superior quality copper tubular cable socket and making core termination of cables of the following sizes including crimping etc. as required.<br>10 sq mm

Supply of superior quality copper tubular cable socket and making core termination of cables of the following sizes including crimping etc. as required.<br>6 sq mm

Supply and providing the following sizes of bolt and nut with washers on the existing MS box / earth bus etc. as required including drilling necessary holes as required<br>25 x 3 mm brass bolt & nut

App-Q-SITC of Air Conditioners

Supply and conveyance of wall mounting type split air conditioner unit conforming to IS fitted with rotary compressor operating on 230V single phase AC supply ,R410A/R32 non CFC refrigerant capable of performing functions like cooling, dehumidifying ,air circulating, filtering etc of following capacity microprocessor control with cordless remote control etc<br>1 TR 5 star single phase invertor type split AC unit make :Blue star/LG/Carrier

Supply and conveyance of wall mounting type split air conditioner unit conforming to IS fitted with rotary compressor operating on 230V single phase AC supply ,R410A/R32 non CFC refrigerant capable of performing functions like cooling, dehumidifying ,air circulating, filtering etc of following capacity microprocessor control with cordless remote control etc<br>1.5 TR 5 star single phase invertor type split AC unit make :Blue star/LG/Carrier

Supply and conveyance of wall mounting type split air conditioner unit conforming to IS fitted with rotary compressor operating on 230V single phase AC supply ,R410A/R32 non CFC refrigerant capable of performing functions like cooling, dehumidifying ,air circulating, filtering etc of following capacity microprocessor control with cordless remote control etc<br>2 TR 5 star single phase invertor type split AC unit make :Blue star/LG/Carrier

Supply and conveyance of wall mounting type split air conditioner unit conforming to IS fitted with rotary compressor operating on 230V single phase AC supply ,R410A/R32 non CFC refrigerant capable of performing functions like cooling, dehumidifying ,air circulating, filtering etc of following capacity microprocessor control with cordless remote control etc<br>2.5 TR 5 star single phase invertor type split AC unit make :Blue star/LG/Carrier

Supply,Conveyance,Installation,Testing and commissioning of Air cooled floor /ceiling mounted ductable split air conditioners of normal capacity of 11 TR capacity with hermitically sealed multiple scroll compressors(5.5TRx 2 or equivalant) Evaporate coils with integrally finned copper tubes. The Compressor shall have independent refrigerant circuits, expansion devices, HP/LP cut offs, Micropocessor based control panel, wired remote control etc. complete as per manufactures specification & standards .The condensation unit shall have required capacity conderser fan and condensation coil.The whole system shall be painted/powder coated with anticorrosive material

Supply, conveyance,installation,testing and commissioning of 3 kVA Automaticvoltage stablizer suitable for <br>1/1.5 TR AC unit with input voltage 170-270V with over load protection(cut off) time delay ,indicator, chord wire etc

Supply, conveyance,installation,testing and commissioning of 4 kVA Automaticvoltage stablizer suitable for <br>2 /2.5 AC unit with input voltage 170-270V with over load protection(cut off) time delay ,indicator, chord wire etc

Charges for Installation,Testing and commissioning of 1TR/1.5TR/2 TR and 2.5 TR of the above system with leak testing including flushing, vaccumising pressure testing and gas charging required quantity of refrigerant and oil etc complete as required

Supply and providing the following size soft drawn copper pipe between outdoorand indoor unit,including the pipe rubberized form sleeve 16mm thick,brazing,leak testing etc<br>1/4 inch(6.35mm)and 1/2 inch(12.7mm)22 gauge

Supply and providing the following size soft drawn copper pipe between outdoorand indoor unit,including the pipe rubberized form sleeve 16mm thick,brazing,leak testing etc<br>1/2 inch(12.7mm)22 gauge

Supply and providing the following size soft drawn copper pipe between outdoorand indoor unit,including the pipe rubberized form sleeve 16mm thick,brazing,leak testing etc<br>3/8 inch(10mm)22 gauge

Supply and providing the following size soft drawn copper pipe between outdoorand indoor unit,including the pipe rubberized form sleeve 16mm thick,brazing,leak testing etc<br>3/4 inch(20mm)22 gauge

Supply and providing the following size soft drawn copper pipe between outdoorand indoor unit,including the pipe rubberized form sleeve 16mm thick,brazing,leak testing etc<br>5/8 inch(10mm)22 gauge

Supply and fixing supporting stand/clamp for fixing the out door unit using suitable support bars/anchorbolts and safety hook up etc including all accessories etc complete as required

Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required2X2.5 sq.mm+1X2.5 sq.mm earth wire

Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required2x4 sq.mm + 1x4 sq.mm earth wire

Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required4 X 6 sq. mm + 2 X 6 sq. mm earth wire

Supply and fixing 4P sheet steel enclosure on surface/recess along with 40A 440V 4 ole Isolatorcomplete with connections testing and commissioning etc as required

Supply and fixing 8mm/10mm threaded down rods with expansion bolt and all necessary accessories complete

Supply fabrication, installation and testing of GSS metal duct in accordance with approved shop drawings and as required by specifications <br>22 swg

Supply fabrication, installation and testing of GSS metal duct in accordance with approved shop drawings and as required by specifications <br>24 swg

Supply, Installation, testing and balancing of grilles of Aluminium construction with powder coated finish<br>Air grilles without damper

Supply, Installation and balancing of grilles of Aluminium construction with powder coated finish<br>Air grilles with aluminium damper

Supply, installation & testing of Thermal Insulation of ducting using Closed Cell Elastomeric nitrile rubber having a density of 40-60 Kg/m3 and with Microban Certified anti-microbial protection<br>18 mm thick

Supply and providing underdeek insulation with 50mm thick TF grade polysterine blocks with 22 guage GI wire lacing and minimum 5 screw supports per sqare meter etc complete in all respects

Supply and providing drain piping for the condensate drain to the nearest drain pit using 25mm PVC pipe and special including providing insulation with 25mm nitrile rubber

App-R-SITC OF DG SET,UPS & Inverter

Supply, conveyance, Installation, testing & commissioning of 250 KVA Diesel Generator set with integral<br>acoustic enclosure as per CPCB norms with standardised accessories as per technical details given<br>below. 1. Engine : a) Make of Engine - Kirloskar//Cummins/Leyland/Volvo b) Type of Engine - Diesel<br>Engine c) No. of Cylinders - As per manufactures standards. d) Method of Cooling Water cooled with<br>radiator. e) Design - Suitable for generating set operation 2.Standard accessories with Diesel Engine a)<br>Fly wheel to suit flexible coupling b) Close Coupling c) Air cleaner d) Radiator with fan provided with fan<br>guard. e) Fuel Pump f) Fuel filter g) Lubricating oil filter h) Exhaust silencer i) Exhaust Muffler j) Battery<br>Charger/Generator 3. Engine Instrument Panel with the following items a) Starting switch with key or<br>button b) Lubricating oil pressure gauge. c) Water temperature gauge. d) RPM Indicator with hour meter<br>e) Battery charging Ammeter 4. Safety Controls for Engine a) Trip for low lubricating oil pressure b) Trip<br>for high water temperature. 6. Brushless Alternator a) Make Kirloskar/KEL//Stanford/LS b) Type - Self<br>exited and self regulated. c) Capacity - 250 KVA/200 K W @ 0.8PF d) System of Voltage - 3 phase, 415<br>V, e) Frequency - 50 Hz f) Insulation - Class F/H The Alternator should confirm to IS 4722. Operation and<br>service manual, spares and tools shall be provided. 7. Fuel Tank Suitable size built in type integrated with<br>the acoustic enclosure Fuel connection shall be done as per standards 8. Battery Suitable size built in<br>type integrated battery with leads and terminals of appropriate AH capacity as per Manufactures<br>requirement. Automatic Battery charger Solid state phase indication lamp for supply ON/OFF with HRC<br>protection with AMF control panel mounted separately or with modifying existing or new Panel board as<br>per kerala Electrical Inspectorate requirements, with 400A 4 pole MCCB and accessories such as Multi<br>function metre and separate Energy metre etc.Complete with With AMF control panel consisting of 2Nos<br>400A Contactors, 1No AMF Relay, control wiring etc. with fully comprehensive maintenance contract up<br>to 36 months from date of commissioning<br>

Supply, conveyance, Installation, testing & commissioning of 320 KVA Diesel Generator set with integral<br>acoustic enclosure as per CPCB norms with standardised accessories as per technical details given<br>below. 1. Engine : a) Make of Engine - Kirloskar//Cummins/Leyland/Volvo b) Type of Engine - Diesel<br>Engine c) No. of Cylinders - As per manufactures standards. d) Method of Cooling Water cooled with<br>radiator. e) Design - Suitable for generating set operation 2.Standard accessories with Diesel Engine a)<br>Fly wheel to suit flexible coupling b) Close Coupling c) Air cleaner d) Radiator with fan provided with fan<br>guard. e) Fuel Pump f) Fuel filter g) Lubricating oil filter h) Exhaust silencer i) Exhaust Muffler j) Battery<br>Charger/Generator 3. Engine Instrument Panel with the following items a) Starting switch with key or<br>button b) Lubricating oil pressure gauge. c) Water temperature gauge. d) RPM Indicator with hour meter<br>e) Battery charging Ammeter 4. Safety Controls for Engine a) Trip for low lubricating oil pressure b) Trip<br>for high water temperature. 6. Brushless Alternator a) Make Kirloskar/KEL//Stanford/LS b) Type - Self<br>exited and self regulated. c) Capacity - 320 KVA/256 K W@ 0.8PF d) System of Voltage - 3 phase, 415<br>V, e) Frequency - 50 Hz f) Insulation - Class F/H The Alternator should confirm to IS 4722. Operation and<br>service manual, spares and tools shall be provided. 7. Fuel Tank Suitable size built in type integrated with<br>the acoustic enclosure Fuel connection shall be done as per standards 8. Battery Suitable size built in<br>type integrated battery with leads and terminals of appropriate AH capacity as per Manufactures<br>requirement. Automatic Battery charger Solid state phase indication lamp for supply ON/OFF with HRC<br>protection with AMF control panel mounted separately or with modifying existing or new Panel board as<br>per kerala Electrical Inspectorate requirements, with 630A 4 pole MCCB and accessories such as Multi<br>function metre and separate Energy metre etc.Complete with With AMF control panel consisting of 2Nos<br>400A Contactors, 1No AMF Relay, control wiring etc. with fully comprehensive maintenance contract up<br>to 36 months from date of commissioning<br>

@ 0.8PF d) System of Voltage - 3 phase, 415<br>V, e) Frequency - 50 Hz f) Insulation - Class F/H The Alternator should confirm to IS 4722. Operation and<br>service manual, spares and tools shall be provided. 7. Fuel Tank Suitable size built in type integr

90.14.10.21 Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.400A, 70 kA (Ics=100%Icu), 4 pole, current limiting type MCCB with microprocessor based release with overload setting of 50 - 100% having adjustable OL & SC

Supply and providing the following size of B class MS pipe conforming to relevant IS 1239Part-1(2004) specification complete with havey gauge specials such as bend,flanges etcwelded and fixed atappropriate locations providing cork sheetin between the flanges at the joints,bolting the flanges together,painting the pipe, flanges etc with 2 coats of heat resistant paint suitable for outdoor applications fixing the pipe firmly with fabricate structure mechanical support etc as required 150mmdia

Supply and providing the following size of B class MS pipe conforming to relevant IS 1239Part-1(2004) specification complete with havey gauge specials such as bend,flanges etcwelded and fixed at appropriate locations providing cork sheetin between the flanges at the joints,bolting the flanges together,painting the pipe, flanges etc with 2 coats of heat resistant paint suitable for outdoor applications fixing the pipe firmly with fabricate structure mechanical support etc as required 100mmdia

Supply and providing2.5mm thick elastomeric fire retardant insulating mat as per IS15652/2006 to withstand 11 KV dielectric strength including fixing with suitable synthetic adhesive

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper power cable,<br>1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not<br>exceeding 60 cms, making good the damages , colour washing etc. as required. 12 core 2.50 sq mm with<br>factory made clamp

Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.4 core 300 sq mm

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 185 sq mm

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 300 sq mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 185 sq. mm (57mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 300 sq. mm (70mm)

Supply and fixing CT operated LT operted 1/3 phase,240/415,1/5Amount electric kWh counter type meter CI 1 energy meter 96x96mm with accuracy class 1,suitable for 50/5 cast resin CT with inter connection to the meter by suitable rating copper wire tie mount etc the meter fixed in the panel board with including cutting suitable pocket and fixing in the pocket and giving connection etc as required(L&T or equivalent)

Supply and fixing Digital multifunction meter to read V,A,F,PF,3 phase accuracy class -1

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, andproviding masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supply and clamping the following size of strips on surface of wall/ parapet/ existing cable tray using clamps fabricated from 20 X 3 mm GI flat duly painted or heavy duty GI spacer saddles spacing of clamps not exceeding 1 m, making good the damages, colour washing etc. as required ( for horizontal run)20 x 3 mm copper strip

Supply and clamping the following size of strips on surface of wall/ parapet/ existing cable tray using clamps fabricated from 20 X 3 mm GI flat duly painted or heavy duty GI spacer saddles spacing of clamps not exceeding 1 m, making good the damages, colour washing etc. as required ( for horizontal run)25 x 3 mm copper strip

Supply and clamping the following sizes of strips on surface of wall / parapet/ existing cable tray using clamps fabricated from 20 x3 mm GI flat duly painted or heavy duty GI spacer saddles, spacing of clamps not exceeding 1 m , making good the damages, colour washing etc. as required ( for vertical run).20 x 3 mm copper strip

Supply and clamping the following sizes of strips on surface of wall / parapet/ existing cable tray using clamps fabricated from 20 x3 mm GI flat duly painted or heavy duty GI spacer saddles, spacing of clamps not exceeding 1 m , making good the damages, colour washing etc. as required ( for vertical run).25 x 3 mm copper strip

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 1.5 sq. mm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 4 sq. mm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 6 sq. mm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surfacerecess including cutting the wall and making good the same in case of recessed conduit as required.20 mm

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator8 way, Double door

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator12 way, Double door

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residualcurrent circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps

Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32amps 240 volts "C" curve DP MCB complete with connections, testing and commissioning etc. as required

Supply,Conveyance,Installation,Testing and commissioning of 1 KVA Sin wave Inverter with battery rack SMF batteries for 30 minutes backup other accessories and all connections complete as required

Supply,Conveyance,Installation,Testing and commissioning of 2 KVA Sin wave Inverter with battery rack SMF batteries for 30 minutes backup other accessories and all connections complete as required

Supply,Conveyance,Installation,Testing and commissioning of 2 KVA UPS with battery rack SMF batteries for 15miniutes backup other accessories and all connections complete as required

App-S-Lightining Protection system

Surge protection Device for TV application<br>Surge protection device shall be tested as per IEC 6164321 with MCOV 180V DC with normal discharge current of 10KA & maximum discharge current of 20KA.Residual voltage at shall be <700V.Series Impedance of 75ohm .Frequency range 0-2.0 GHz.Dgree of protection should be IP20.Protective element should be low capacitance gas discharge arrestors.insertion loss shall be less than 0.4dB.Termination shall be M-F type<br>Make Raycap or equivalent

Surge protection Device for single Telephone line<br>Surge protection device shall be tested as per IEC 61643-21 with MCOV 175V DC maximum operating current shall be 150mA.Normal discharge currentshall be 2.5KA& maximum discharge current shall be 5KA.Voltage pritection level at normal discharge current for L-L shall be <-300V & for L-G shall be 1000V.Frequency range upto 10MHz L-L response time shall be less than 5 nano second & L-G response time shall be less than 100nanosecond.Input/output connection terminal shall be suitable for RJ11/RJ45.Degree of protection shall be of IP20<br>Make Raycap or equivalent

shall be 2.5KA& maximum discharge current shall be 5KA.Voltage pritection level at normal discharge current for L-L shall be <-300V & for L-G shall be 1000V.Frequency range upto 10MHz L-L response time shall be less than 5 nano second & L-G response time shall be less than 100nanosecond.Input/output connection terminal shall be suitable for RJ11/RJ45.Degree of protection shall be of IP20<br>Make Raycap or equivalent

od277745/2020_2021 Surge protection Device for Three phase DB<br>This panel should include surge protection device class C/class 2 tested as per IEC 61643 part 11:2011.Normal voltage 230V 50 hz,MCOV of 275v & total maximum discharge current 160KA volktage protection level<1.5kV& residual voltage@5 kA(8/20)<1.1KV.The surge protection devices should have TOV withstand for 120Min:438V protective elements are MOV & GDT & the protection modes for L&Nto PE.The connections(Three line& neutral)should be directly connected to protective eartyh terminal for better response time back up fuse required more than 125AgG/gl.Helth status indication required in all catrige.Total response time<25 nano second Make:raycap or equivalant

Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube,having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc.complete as required

Fixing of lightning conductor finial (single prong) with base plate including holes etc. complete as required.

Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightningconductor complete as required.(For horizontal run)

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightningconductor complete as required.(For vertical run)

Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.

Providing and laying G.l. tape 32 mm X 6 mm from earth. electrode directly in ground as required.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, andproviding masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

App-T-Fire Fighting System

Under Ground/Above ground piping:-Providing, laying, testing and commissioning of 'C' class heavy duty<br>MS pipe conforming to IS:1239 I/c fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc fixing<br>the pipe on the wall/ ceiling with suitable clamps and painting with two or more coats of synthetic enamel<br>paint of required shade complete as required. The under ground pipes should be given 2mm thick<br>anticorrosive wrapping and coating. The pipes shall be tested for a test pressure of 14Kg/sq.cm and<br>holding in 24 hours<br>100 mm dia ' Class heavy duty MS pipe

Under Ground/Above ground piping:-Providing, laying, testing and commissioning of 'C' class heavy duty<br>MS pipe conforming to IS:1239 I/c fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc fixing<br>the pipe on the wall/ ceiling with suitable clamps and painting with two or more coats of synthetic enamel<br>paint of required shade complete as required. The under ground pipes should be given 2mm thick<br>anticorrosive wrapping and coating. The pipes shall be tested for a test pressure of 14Kg/sq.cm and<br>holding in 24 hours<br>80 mm dia ' Class heavy duty MS pipe

Supply and providing class C Heavy duty MS pipe with all required specials fasteners supports etc complete of size 65mm dia

ABOVE GROUND/UNDER GROUND PIPING:- Supply,erection,testing and commissioning of M S pipes<br>of the following sizes"c" class conforming to IS 1239 with required attachment including necessary<br>bends,tees, reducers, flanges etc. the pipes cut in required length and joined with necessary bots and<br>washers. the piping should be given primer and two coats of red color enamel painting and under ground<br>pipe should be given anti corrosive wrapping including earth work excavation.50 mm dia<br>

ABOVE GROUND/UNDER GROUND PIPING:- Supply,erection,testing and commissioning of M S pipes<br>of the following sizes"c" class conforming to IS 1239 with required attachment including necessary<br>bends,tees, reducers, flanges etc. the pipes cut in required length and joined with necessary bots and<br>washers. the piping should be given primer and two coats of red color enamel painting and under ground<br>pipe should be given anti corrosive wrapping including earth work excavation.32 mm dia

Supply and providing class C Heavy duty MS pipe with all required specials fasteners supports etc complete of size 25mm dia

Pressure Switch:Supply,installation,testing and commissioning of pressure switch bellow type of approved make

Non return valve:Supply ,Installation,Testing and commissioning of double flanger horizontal type non return valve/relex valve as per IS 5312 of following sizes having CI body and gun moving parts with nuts,bolts,gaskets etc and tested to 14KG/cm2working pressure 80mm dia

Smoke Detector:Supply,Installation,Testing and commissioning of ionization type/multy sensing type smoke detector with complete accessories

Hooters:Supply,Installation,Testing and commissioning of Audio alarm hooters

supply and providing pressure gauge in the existing systems required

Supply and providing fire brigade inlet 63mm dia 2 way as required

Fire Hose-SITC of of Re-inforced rubber lined hose conforming to IS 636,63mmdia with ISI mark15m long and fitted with instantaneous type coupling on both ends made gun metal(Firex/Newage/CRC/Zenith

Hose cabinet- supply and fixing of wether proof hose cabinet having the size of 750x500x250mm made of 16 gauge MS sheet with PCC support and full front glass door and locking arrangements suitable to accommodate 2 Nos15m long hose pipe and 1No branch pipe.The cabinet shall be painted to scariet red colour double

SITC of single headed Hydrant valve with stainless steel coupling63mm dia oblique type conforming to IS5290 with cap and chain as required with instantaneous hose coupling adapter

Manual call point:Supply,Installation,Testing and commissioning of manual call point(Break glass type)with hammer and chain

Branch Pipe:Supply,Installation,Testing and commissioning of gun metal short branch pipe conforming to IS 903 and with ISI mark with 63mm female hexagonal base nozzle(Make neage/winco/Zenith)

Supply and fixing first aid hose reel with construction spray painted in post office red drum and brakets conforming IS 884 with upto date amendments,complete with the following as required (a)30m long 20mm (norman internal)dia water hose thermoplastic for foxing the equipments on wall<br>(b) connections from riser with 25mm dia stop valve & MS pipe

SIGN BOARD:Supply and erection of glow sign board made of 3mm thick PVC form board for each floor 12''x4''(fire lift,Passenger lift,electrical duct,fire station ,main stair,Fire exit,floor display and pump room)

Supply and erection of Assembly point sign board 16''x16''

Supply and erection of fire escape rout in each floor having size 12''x16'' made of 3mm thick acrylic sheet with glass frame

BOOSTER PUMP: Supply Installation, Testing and Commissioning Electrically driven Mono block Jockey pump having capacity of 180 LPM with all the necessary accessories operating on 3 Ph. 50 Hz. 415 V ACsupply including foundation bolts etc. complete, The Pump set shall be of 5 HP@48 Mtr Head

DIESEL PUMP: Supply, Installation, testing and commissioning of Horizontal mounted end suction diesel motor driven Pump set suitable for automatic operation rated for 1620 LPM, high efficiency, volute type with cast iron casing, cast iron impeller pump coupled to a squirrel cage induction motor of 38 HP@80 Mtr Head, screen protected drip proof [Diesel tank with Battary. The pump-set is of foot mounted type including all accessories such as standard coupling, coupling guard, common base-frame, foundation bolts,etc. <br>Make -Kirloskar

JOCKEY PUMP: Supply Installation, Testing and Commissioning Electrically driven Mono block Jockey pump having capacity of 180 LPM with all the necessary accessories operating on 3 Ph. 50 Hz. 415 V AC supply including foundation bolts etc. complete, The Pump set shall be of 7.5 HP@50 Mtr Head. Jockey pump. <br>Make -Kirloskar/LHP/LUBI

MAIN PUMP: Supply, Installation, testing and commissioning of Horizontal mounted end suction Electric motor driven Pump set suitable for automatic operation rated for 1620 LPM at 50MWC, high efficiency, volute type with cast iron casing, cast iron impeller pump coupled to a squirrel cage induction motor of 40 HP@80 Mtr Head, screen protected drip proof. The operating voltage is 415v 3 phase 50 Hz. The pumpset is of foot mounted type including all accessories such as standard coupling, coupling guard, common base-frame, foundation bolts, etc.<br>Make -Kirloskar/LHP/LUBI

od281849/2020_2021 FIRE PUMP PANEL BOARD : Supply, Installation, testing and Commissioning of Motor Control Panel (DOL Type) for Fire pumps incorporating starters and Switchgear suitable for the motor HP The provision to be made for auto operation of all pump sets as per NBC norms. The control panel shall be duly painted with 2coats of anti-corrosive primer and Epoxy paint of Fire Red Color fabricated out 16SWG CRCA Sheet floor/wall mounted type complete with Control and Power terminals, etc. With L&T/SEMENS accessories as per Kerala Electrical Inspectorate Standards.

supply and laying 2core 1.5 sqmm copper conductor PVC insulatedand sheathed armoured(FRLS)fire proof cable conforming to relevant IS/fireprotection laws including termination completeas per specification as required

Foot Valve:Providing and fixing the following sizes of cast iron type foot valve with strainer to the pump set complete with bolts,nuts,gaskets if any as required(make Kalpana,Krilosker)100mm

Fire Alarm panel:Supply,Installation,Testing and commissioning of control panel 4 zone complete with charger,rectifier,alarm display with all other necessary attachments with provision for public addressing system and battery backup

Sprinkler Bulb:Supply,Installation,Testing and commissioning of Sprinkler bulbs of 68 Dege

Non-Return Valve:Supply,Installation,Testing and commissioning of double flanged horizontal type non retun valve/reflex valve as per IS 5312 of following sizes having CI body and Gun moving parts,with nuts,bolts,gasketsetc and tested to 14Kg/cm2working pressure 100mm dia

Butterfly Valve:Supply,Installation,Testing and commissioning of double flanged sluice valve of following sizes conforming to IS 14846/2000 with CI wheel bolts nuts washers,rubber gasket etc complete and tested to 14Kg/cm2working pressure 100mm

Butterfly Valve:Supply,installation,Testing and commissioning of double flanged sluice valve of following size conforming IS 14846/2000 with CI wheel bolts nuts washers,rubber gasket etc complete and tested to 14Kg/cm2 working pressure,80mm dia

Air release Valve:Supply,Installation,Testing and commissiong of Air release valve 20mm gun metal

Supply,Installation ,Testing and commissioning of ceiling mounting speaker 6W

Supply and providing 5 Kg dry chemical powder type fire extinguisher with hose and clamps including fixing to wall as required

Supply,erection,testing and commissioning of talk back field device

Supply,Installation,Testing and commissioning of solid state Amplifier of 60A RMS output in rack including necessary control wire,Jack etc complete as required

Supply and providing emergency fire escape lighting system consisting of 2 nos lamp 7AH battery charging unit,exit sign display etc in MS enclosure

Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623.<br>Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)

Supply and providing 2mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc.

Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

Supply and providing copper bus bars including finger type SMC bus bar supports in the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. as required

Supply and providing copper earth bus in the panel board

Supply and fixing up to 20A 230/415V Backlite fuse base with fuse link

Supply and providing 125/ 5 A, 5 VA, 10 P 5, tape wound protection CT class 0.5 in the panel board

Supply and fixing Digital multifunction meter to read V,A,F,PF,3 phase accuracy class -1

Supply,installation and testing of LED indicator for all voltage range with Green/red/Yellow colour s

Supply,installation and testing of LED indicator for all voltage range with Blue colour

Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.32 Amp TP & N

Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.63 Amp TP & N

Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.125 Amp TP & N

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 35 sq mm with factory made clamp

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 35 sq. mm (32mm)

Supply and drawing 650/1100 V grade FRLS PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required includinggiving necessary connections of the following sizes.1.00 sq.mm 2 Run

Supply and drawing 650/1100 V grade FRLS PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.1.00 sq.mm 4 Run

Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.2 core 1.50 sq mm

Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required4 X 4 sq. mm + 2 X 4 sq. mm earth wire

Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulatedcopper conductor, single core cable in surface/ recessed steel conduit as required4 X 6 sq. mm + 2 X 6 sq. mm earth wire

Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.65 mm copper conductor (12 SWG)

Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.65 mm (12 SWG)

Fee to be remitted to fire rescue service Department(actual amount incurred for the above items will be reimbursed on production of original documents)

App-U-SITC OF Passenger Lift

Supply and Installation of 8 Passenger capacity Passenger Lift, Machine room Type,<br>Gear less, V3F Drive - SMPS based power supply- <br>Speed 1.00 m/s - Travel 12 mtr - <br>No of<br>floors and entrances served - 3 Nos [ Ground + 2 nos.upper Floors [ All opening on the same side ] -<br><br>Size of lift well 2000.mm {Width } X 2000 mm { Depth } -<br>Size of car platform as per IS, Car and<br>Hoist way entrance as per IS [1000. mm ] -<br>Safeties Infrared door opening, Automatic rescue devices<br><br>Guarantee for 36 Months period.<b

App-V-Electrical Miscellaneous

Supply and providing 9 Litre capacity GI Fire Bucket painted in post office red with primer coat of red oxide and written with white paint 'FIRE' mounted on MS angle frame work/ wall bracket filled with fine sand, painting the bracket/ floor stand including making good the damages, colour washing etc. as required.<br>

Enameled Danger Notice board of size 100x75mm with inspections(Both in English and malayalam) and conventional Skull and born in red colour

Supplying and installation of supports, anchor bolts etc made out of suitable size single section MS angle, flats etc as required including painting with 2 coats of synthetic enamel paint<br>

Supply and providing 5 Kg dry chemical powder type fire extinguisher with hose and clamps including fixing to wall as required

Supply and providing of emergency trip push button in metal enclosure with breakable glass cover

Supply and providing First Aid Chart duly framed and placed in a conspicuous location for clear vision.<br

Supply and installation for providing fire sealant mortar(make OBO) with 15cm thickness for fire proof partition between floors in the electrical ducts

Supply and providing 2mm thick Elastomeric fire retardent insulating mat as per IS 15652/2006 to withstand 3.3 KV dielectric strength. <br>

Supply and providing the following sizes of bolt and nut with washers on the existing MS box / earth bus etc. as required including drilling necessary holes as required<br>25 x 6 mm brass bolt & nut

Supplying and installation including all manner of supports/ suspenders, anchor bolts etc for cable trays made out of suitable size channel sections, slotted angles, flats, MS plates etc as required including painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required.<br>

fees to remitted to KSEI and KSEB departmemt (actual amount incurred for the above Items will be reimbursrd)

App-W-Appliances

Supply of 1.0 Ltr or nearest higher capacity kettle

Supply of 43 inch commercial LED TV at site

Supply of 45 Ltr or nearest higher capacity vapour compression type minifridge working on 230V AC supply

App-X-SITC of Networking system

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25mm

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm)

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.1 or 2 Module

Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required1 run of Cable

Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required2 run of Cable

Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required3 run of Cable

Supplying & Drawing unarmored PVC insulated and & PVC sheathed copper conductor Telephone Pair Cable conforming to ITD specification for indoor application through the existing conduit2 pair

Supplying & Drawing unarmored PVC insulated and & PVC sheathed copper conductor Telephone Pair Cable conforming to ITD specification for indoor application through the existing conduit3 pair

Supplying & Drawing unarmored PVC insulated and & PVC sheathed copper conductor Telephone Pair Cable conforming to ITD specification for indoor application through the existing conduit4 pair

Supplying & Drawing unarmored PVC insulated and & PVC sheathed copper conductor Telephone Pair Cable conforming to ITD specification for indoor application through the existing conduit5 pair

Supplying & Drawing unarmored PVC insulated and & PVC sheathed copper conductor Telephone Pair Cable conforming to ITD specification for indoor application through the existing conduit10 pair

Supplying & Drawing unarmored PVC insulated and & PVC sheathed copper conductor Telephone Pair Cable conforming to ITD specification for indoor application through the existing conduit20 pair

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated,shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/recessed steel/ PVC conduit as required.

Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation50/38 mm or nearest size

Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation63/50 mm or nearest size

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.Telephone socket outlet

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.TV antenna socket outlet

Supply, Installation, Testing and Commissioning of IP based EPABX system having capacity of minimum 60 Nos of IP extension, 4 digital lines, PRI interface, IP phone type operator console, 60 key direct station access, etc including media convertor, IP to analog gateway switches, 24 port giga bit switches, 6U racks etc complete as required at site<br>

Supply and laying 6 core optical fibre of good quality and reputed make

Supply and providing HDMI cable

Supply,Installation of 50 pair termination box

Supply,Installation of 100 pair termination box

Supply and providing VGA cable

Supply,Installation,testing and commissioning of 6x8 feet TRIPOD SCREEN wall mount type with stand

Supply,Installation,testing and commissioning of LCD Projector for department approved quality

Supply and providing of push button type Telephone

Supply,Installation and commissioning of CAT6 Keystone Jack

App-Y- L-Outdoor lighting

Supply installation testing commissioning of Octogaonal Pole made of hot dip galvanised GI sheet 70mm top diameter, 130mm bottom diameter thickness 3mm base plate dimensions of 200x200x12mm suitable for wind speed as per IS 875 Part III single arm bracket 0.5mt including connector foundation bolt 4 nos fixed in existing RCC foundation and junctions box etc.complete 5 Meters

Supply,conveyance,Installation,Testing and commissioning of 25 W LED street light in alumimium pressure die cast housing with glass cover & lens (IP65 rating ) fix on the existing pole complete as required(LPCRSRT25WXC Jaguar make)

Supply,Conveyance,Installation,Testing and commissioning of Bollard light fitting with suitable LED bulb for Departmental approved quality at site including <br> bolts fixed in RCC Foundation

Supplying, installation, testing and commissioning of Astronomical time switch capable of following output in feeder pillars/ Lighting DBs for automatic switching On &OFF of street lights at sun set & sun ruse or twilight override facility with 12/24 hour display format with suitable battery and indication for relay status i/c programming at site complete ad required3 output (1output per phase) and suitable for three phase supply

Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.3 core 0.75 sq mm

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

Supply and fixing sintex outdoor junction box with necessary clamp ,nuts and bolts as required <br>93mmx93mmx62mm

Supply and fixing 32A415V 2way nutral link in the existing sintex junction box

Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil).2 core 4 sq mm

Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil).4 core 4 sq mm

Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil).4 core 6 sq mm

Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil).4 core 10 sq mm

Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil).4 core 16 sq mm

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 4 sq mm with factory made clamp

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 6 sq mm with factory made clamp

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 10 sq mm with factory made clamp

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 16 sq mm with factory made clamp

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm

Supply and making end termination with brass compression glad and Alumimium legs for following size of PVC insulated and PVC sheathed XLPE Aluminium cable 1.1 KV grade as required 4sqmm

Supply and making end termination with brass compression glad and Alumimium legs for following size of PVC insulated and PVC sheathed XLPE Aluminium cable 1.1 KV grade as required 6sqmm

Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.00 mm copper conductor ( 14 SWG)

Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.00 mm (14 SWG)

LALUMON CHANDRAN