Loading
Loading…
Loading…
Tender Value
₹10.5 Cr
EMD Value
₹6.8 L
Closing Date
10 Mar 2026, 3:30 pmClosed
Yes (up to 3 members)
No
Two Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
90 days
Expenditure
Capital (Works)
ENGG
24 conditions · 7 needing a document upload
10.2 Financial eligibility criteria : Financial Eligibility Criteria::The tenderer must have minimum average annual contractual turnover of V/N crores or 'V' crores whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-Y (of this Tender Document), along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Each page of the copy of documents/certificates in support of Special Financial Criteria, submitted by the tenderer, shall be self- attested/digitally signed by the tenderer or authorized representative of the tendering firm. Self attestation shall include signature, stamp and date (on each page).
Note: Explanation for clause 10 including 10.2 contractor may refer Indian Railways Standard General Conditions of Contract- April- 2022 (GCC-April-2022).
Credentials if submitted in foreign currency shall be converted into Indian currency i.e., Indian Rupee as per clause 10.5 of Indian Railways Standard General Conditions of Contract- April- 2022 (GCC-April-2022).
Financial Eligibility Criteria (For Joint Venture Firm): The JV shall satisfy the requirement of "Financial Eligibility" as per GCC-April-2022. The "financial capacity" of the lead member of JV shall not be less than 51% of the financial eligibility criteria mentioned at GCC-April-2022. The arithmetic sum of individual "financial capacity" of all the members shall be taken as JV's "financial capacity" to satisfy this requirement. Note:- Contractual payment received by a Member in an earlier JV shall be reckoned only to the extent of the concerned member's share in that JV for the purpose of satisfying compliance of the above mentioned financial eligibility criteria in the tender under consideration.
Eligibility criteria: - 10.1 (a) The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender. Eligibility criteria for Joint Venture Firms: Technical, financial eligibility and Bid capacity of the JV shall be adjudged based on satisfactory fulfillment of the following criteria: Technical Eligibility Criteria: The technical eligibility for the work shall be satisfied by either the 'JV in its own name & style' or 'Lead member of the JV'. Each other (non-lead) member(s) of JV, who is/are not satisfying the technical eligibility for the work shall have technical capacity of minimum 10% of the cost of work i.e., each non-lead member of JV member must have satisfactorily completed or substantially completed during the last 07 (seven) years, ending last day of month previous to the one in which tender is invited, one similar single work for a minimum of 10% of advertised value of the tender. Note:- (i). Value of a completed work done by a Member in an earlier JV shall be reckoned only to the extent of the concerned member's share in that JV for the purpose of satisfying his/her compliance to the above mentioned technical eligibility criteria in the tender under consideration. Substantially Completed Work: - Substantially Completed Work means an ongoing work in which payment equal to or more than 90% of the present contract value (excluding the payment made for adjustment of Price variation (PVC), if any) has been made to the contractor in that ongoing contract and no proceedings of termination of contract on Contractor's default has been initiated. The credential certificate in this regard should have been issued not prior to 60 days of date of invitation of present tender. Note for item 10.1: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organization, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Definition of Similar Work :- "Construction of Any Civil Engineering Work Comprising of Building Works".
The tenderer in support of his/their claim of qualifying the laid down "Technical Eligibility Criteria" must submit Experience Certificate as per format prescribed in Annexure "W"duly self attested/digitally signed on each page (Self Attestation shall include signature,date & stamp of the tenderer.
The copy of respective letter of acceptance/agreement for which experience certificate has been produced in Annexure-W must be enclosed in support of "Similar Nature of Work". This document should be duly self attested/digitally signed on each page (Self Attestation shall include signature, date & stamp of the tenderer).
Each page of the copy of the documents/ certificates in support of Special Technical Criteria, submitted by the tenderer, shall be duly self attested/digitally signed by the tenderer (Self Attestation shall include signature, date & stamp of the tenderer).
Tenderer has to submit details of Employment/partnership etc of Retired Railway Employees as per Indian Railways Standard General Conditions of Contract- April- 2022(GCC-April-2022) with all correction slips up-to- date and as given in para 24.1 of "General instructions to tenderer" attached with tender document. Tender without the information above referred to or a statement to the effect that no such retired engineer or retired Gazetted Officer is so associated with the tenderer, as the case may be, shall be rejected. Format given in Annexure-J in attached documents.
Note Explanation for clause 10 including 10.1, contractor may refer Indian Railways Standard General Conditions of Contract- April- 2022 (GCC-April-2022).
Credentials if submitted in foreign currency shall be converted into Indian currency i.e.,Indian Rupee as per clause 10.5 of Indian Railways Standard General Conditions of Contract- April- 2022 (GCC-April-2022).
51 conditions
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
GENERAL INSTRUCTIONS TO TENDERERS For e-Tenders
E-tender have been invited for and on behalf of the President of India through website www.ireps.gov.in for the work mentioned against t h e tender notice number available in the website. Tenderers are required to bid online only in the above mentioned website. All Mandatory fields marked have to be filled in by the tenderer. No manual offer is acceptable against this tender. No Tender document i n hard c o p y w i l l b e sold against this tender. Please read the Instructions to Tenderers for e-tendering, Indian Railways Standard General Conditions of Contract- April- 2022 (GCC-April-2022) and Special Condition of Contract before filling the e-tender through online.
E-Tender forms are not transferable and the same is to be submitted with digital signature by the Tenderer already registered with the site.
The submitted e-tender forms w ill b e considered a s digitally signed by the tenderer as a confirmation from the tenderer that the tenderer has read, agreed and accepted all the conditions and attached documents referred in para 1.2 above as well as Schedule of Tender, Indian Railways Standard General Conditions of Contract- April- 2022 (GCC-April-2022) and Special Conditions of Contract.
The tender offer complete in all respect and with all documents i s t o be submitted online by e-tendering process through the website www.ireps.gov.in before t h e closing time/date o f this t e n d e r a s mentioned i n t h e N I T (Notice Inviting Tender). Tenderer can revise the bids any number of times till the closing time/date of the tender. No manual offers shall be accepted.
The Railway may, of its own o r i n response to any clarification requested/ suggested by any person including that from the tenderer, may modify this tender document at its sole discretion at least 15 days before the due date of closing of the tender as corrigendum.
Corrigendum as required may be issued at least 15 days prior to the closing of the tender. The Corrigendum of this tender, if any, as issued time to time will be available on website at least 15 days in advance of closing of tender. The tenderers are requested to check the website before submitting their offer whether any such corrigendum to the tender has been issued or not and revise the offer if required accordingly. Failure on the part of tenderer on this aspect will be solely tenderers responsibility.
This document is the Standard Tender Document which consists of the General Instruction t o Tenderers, NIT (Notice Inviting Tender), Indian Railways Standard G e n e r a l Conditions of Contract- April- 2022 (GCC-April-2022), Special Conditions of Contract, Tender Schedules, Specifications of the works & various Annexures etc. All the above-mentioned documents taken together if not scored off, shall constitute the complete tender document here after referred to as "Tender Document" & have to be read together & acted upon accordingly. No part of the tender document can be relied upon or acted upon in isolation.
T h e Railway a n d t h e website w i l l h a v e n o responsibility for incorrect evaluation of cost and thereby incorrect cost of work and ranking of tenderers, if the schedule i s not filled correctly and unambiguously for each item. No claim or clarification o f a tenderer regarding applicability, inclusion or exclusion o f any element o f t a x o r d u t y o r a n y o t h e r change i n t h e offer subsequently (after opening o f the tender) will b e entertained. F o r this the tenderers are advised to read the Instructions, Indian Railways Standard General Conditions of Contract- April- 2022 (GCC-April-2022), Special Conditions of Contract and other Instructions carefully before submission of tender.
In case of any problem with the portal is faced while filling the e- tender, Tenderers are advised to contact with the Helpdesk of IREPS portal who will render all help and assistance related with the website and portal except that related with the details of the tender. Railway will not take any responsibility for nonparticipation in the e-tender online for the reasons related to the website and portal or server etc beyond the control of railways.
Railway and the IREPS website will not take the responsibility for any online payment made by the tenderer and debited from his/their account towards the Bid Security due to wrong or mismanipulation or any reasons related with the IT o r found unsuitable for the tender etc. In this regard Railway and IREPS website will not entertain any claim or refund the paid amount. E- Tender Forms shall be issued free of cost to all tenderers.
All documents uploaded or information furnished in the website are digitally signed by the competent authority.
After selection, a Letter of Acceptance (the "LOA") shall be issued, in duplicate, by the Railway to the selected tenderer and the selected tenderer shall, within 10 ( ten ) days of the issue of the LOA, sign and return the duplicate copy of the LOA in acknowledgement thereof. In case the duplicate copy of the LOA duly signed by the selected tenderer is not received by the stipulated date, the Railway may, unless it consents to extension of time for submission thereof, forfeit and appropriate the EMD of such tenderer in full on account of failure of the selected tenderer to acknowledge the LOA, and cancel the LOA.
Tenderer to refer "Tender Conditions and Specifications" available in attach documents of tender.
Contact Person :- Designation -Dy. CE/GSU/BSP, Mobile No. - 9303978661, e-mail- [email protected], Office of CPM/GSU/BSP, Near GM Bungalow, Railway Colony, S.E.C. Railway Bilaspur, Pin Code- 495004 (C.G.)
INCONSISTENCY BETWEEN THE DOCUMENTS
The Indian Railways Standard General Conditions of Contract- April- 2022 (GCC-April-2022), Standard Schedule of Rate SSOR), CPWD Specifications 2021 Vol I & II and the USSOR [Unified Standard Schedule of Rates (Labour & Materials) & Indian Railway Unified Standard Specification- 2021 shall be read with all correction slips issued thereto from time to time and shall form integral part of this tender document. In case of any difference, contradiction, discrepancy, with regard to Conditions o f tender/ contract, Specifications, Drawings, Bill of quantities etc., forming part of the tender/ contract, the following shall be the order o f precedence: (i) Letter of Award/Acceptance (LOA) (ii) Bill(s) of Quantities (iii) Special Conditions of Contract (iv) Technical Specifications as given in tender documents (v) Drawings (vi) Indian Railways Standard General Conditions of Contract updated with correction slips issued up to date of inviting tender or as otherwise specified in the tender documents. (vii) Indian Railways Unified Standard Specification (IRUSS-2021) updated with correction slips issued up to date of inviting tender or as otherwise specified in the tender documents, if applicable in the contract. (viii) CPWD Specifications 2021 Vol I & II updated with correction slips issued up to date of inviting tender or as otherwise specified in the tender documents, if applicable in the contract. (ix) Indian Railways Unified Standard Specifications (Works and Material) 2021 updated with correction slips issued up to date of inviting tender or as otherwise specified in the tender documents, if applicable in the contract. (x) IR Specifications/Guidelines updated with correction slips issued up to date of inviting tender or as otherwise specified in the tender documents. (xi) Relevant B.I.S. Codes updated with correction slips issued up to date of inviting tender or as otherwise specified in the tender documents.
TENDERER S POSTAL ADDRESS
Address of tenderer: The address, email Id and Mobile phone, other phone nos. and other details given in the portal while registering will be considered as official address a n d all correspondences t o t h e tenderer will be m a d e in these registered m o d e s . All communication sent i n t i m e t o the tenderer by post at the said address shall be deemed to have reached the tenderer duly and in time. Important documents shall be sent by Registered Post. However, an undertaking has t o b e given i n the enclosed annexure b y uploading a scanned copy of duly filled in form in the portal.
THE SCHEDULE OF WORKS
The Schedules of Works is also available seperately in the website online and Rates are to be quoted online and submitted online duly signed digitally.
INSPECTION OF DATA
Drawings f o r t h e work c a n b e seen i n t h e offi c e inviting this tender on any working day during working hours. The drawings are only for the guidance of tenderers. Detailed working drawings, if required based o n the drawings mentioned above, will be given by the Engineer or his representative from time to time.
OPENING OF TENDER
Opening of e-tender online:- The e-tenders will be opened online using the IREPS portal. No representative is required to be present for opening of tender and taking notes of rates quoted and ranking as the complete details of rates etc. of all the bidders shall be available to the bidders in the website after the opening of the tender. In case of two packet system, technical bids will be opened first and financial bid will be opened in a subsequent date and time to b e notified/intimated t o those bidder whose technical bids are found acceptable. The tenderer must submit the documents in support of technical bids against eligibility criteria as mentioned in special technical criteria at para 4 and filled the financial bid on schedule.
In case the date of closing mentioned in the Notice Inviting Tender is declared a holiday/bandh/strike etc. on any account, the date of closing tender online will not be changed as the application in the website of IREPS does not permit submission of any offer after closing date and time of the tender. However, opening of tenders online will be on any convenient day after the closing date/time of tenders.
SUBMISSION OF DOCUMENTS IN SUPPORT OF ELIGILIITY CRITERIA
All documents in support of fulfillment of the eligibility criteria with respect to completion of similar nature of work for Technical Eligibility Criteria and minimum average annual contractual turnover for Financial Eligibility Criteria must be uploaded over the website www.ireps.gov.in with scanned copy in .Pdf format at the time of tender bidding with details in specified format (Annexure W & Y).
T h e tenderer shall submit along w i t h t h e tender document, documents in support of his / their claim t o fulfill the eligibility criteria as mentioned in the tender document. Each page of the copy of documents/certificates in support of credentials, submitted by the tenderer, shall be self- attested / digitally signed by the tenderer or authorized representative of the tendering firm. Self - attestation shall include signature, stamp and date ( on each page).
T h e R ailw a y reserves t h e r i g h t t o v e r i f y a l l statements, information and documents submitted by the bidder in his tender offer, and the bidder shall, when s o required b y the Railway, m a k e available a l l s u c h information, evidence and documents as may be necessary for such verification. Any such verification or lack of such verification, by the railway shall not relieve the bidder of its obligations or liabilities here under nor will it affect any rights of the railway there under.
In case of any wrong information submitted by tenderer, the contract shall be terminated. Bid Security, Performance Guarantee (PG) and Security Deposit (SD) of contract shall be forfeited and agency shall be debarred for doing business on entire Indian Railways for 2 (two) years.
Tenderer are advised to take utmost care while scanning/uploading the documents related to their eligibility. Railway administration will not be responsible for improperly scanned/uploaded document, corrupt file, illegible documents etc.
The tenderer should ensure that the information/documents, being submitted in support of claim of qualifying the laid down eligibility criteria, are prepared in prescribed formats duly signed by an official authorized t o d o so. Documents issuing authority must furnish a l l relevant information i n the prescribed format itself. Complete details of issuing authority should also be indicated in the document. Furnishing incomplete, illegible, vague information may lead to rejection of offer.
SUBMISSION OF COST OF TENDER FORM:
E-Tender Forms shall be issued free of cost to all tenderers.
SUBMISSION OF Bid Security: The Bid Security shall be deposited either in cash through e-payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India. The Bank Guarantee bond shall be as per Annexure-H and shall be valid for a period of 90 days beyond the bid validity period.
Tender must be accompanied with Bid Security of requisite amount as mentioned in NIT in A/c of FA & CAO, S.E.C.Railway, Bilaspur deposited through Internet Banking or payment gateway only. i Any firm recognized by Department of Industrial Policy and Promotion (DIPP) as 'Startups' shall be exempted from payment of Bid Security deposit detailed above. ii Labour Cooperative Societies shall deposit only 50% of above Bid Security deposit detailed above.
In case, submission of Bid Security in the form of Bank Guarantee, following shall be ensured: i. A scanned copy of the Bank Guarantee shall be uploaded on e-Procurement Portal (IREPS) while applying to the tender. ii. The original Bank Guarantee should be delivered in person to Dy. Chief Engineer/GSU/Bilaspur, office of the Chief Project Manager/GSU/Bilaspur, Near GM Bungalow, Railway Colony, S.E.C. Railway Bilaspur, Pin Code- 495004 (C.G.) before closing date for submission of bids (i.e. Excluding the last date of submission of bids). iii. Non submission of scanned copy of Bank Guarantee with the bid on e-tendering portal (IREPS) and/or non submission of original Bank Guarantee within the specified period shall lead to summary rejection of bid. iv. The Tender Security shall remain valid for a period of 90 days beyond the validity period for the Tender. v. The details of the BG, physically submitted should match with the details available in the scanned copy and the data entered during bid submission time, failing which the bid will be rejected vi. The Bank Guarantee shall be placed in an envelope, which shall be sealed. The envelope shall clearly bear the identification "Bid for the *** Project" and shall clearly indicate the name and address of the Bidder. In addition, the Bid Due Date should be indicated on the right hand top corner of the envelope. vii. The envelope shall be addressed to the officer and address as mentioned in the tender document (Dy. Chief Engineer/GSU/Bilaspur, office of the Chief Project Manager/GSU/Bilaspur, Near GM Bungalow, Railway Colony, S.E.C. Railway Bilaspur, Pin Code- 495004 (C.G.)). viii. If the envelope is not sealed and marked as instructed above, the Railway assumes no responsibility for the misplacement or premature opening of the contents of the Bid submitted and consequent losses, if any, suffered by the Bidder.
SOUTH EAST CENTRAL RAILWAY TENDER FORMS (FIRST SHEET) ANNEXURE-I
I/We have read the various conditions to tender attached hereto and agree to abide by the said conditions. I/We also agree to keep this offer open for acceptance for a period of 60 (Sixty days) days (in case of two packet system of tendering 90 days) from the date fixed for closing of the tender and in default thereof, I/we will be liable for forfeiture of my/our "Bid Security". I/We offer to do the work for South East Central Railway, at the rates quoted in the attached bill(s) of quantities and hereby bind myself/ourselves to complete the work in all respects within as mentioned in NIT of this instant tender (months) from the date of issue of letter of acceptance of the tender.
I/We also hereby agree t o abide b y the Indian Railways Indian Railways Standard General Conditions of Contract- April- 2022 (GCC-April-2022) with all correction slips up-to-date and to carry out the work according to the Special Conditions of Contract and Specifications of materials and works as laid down by Railway in the annexed Special Conditions/Specifications, Schedule of R a t e s w i t h all correction slips up-to-date for the present contract.
A Bid Security of Rs. (as mentioned in NIT of this instant tender) has already been deposited online/ submitted as Bank Guarantee bond. Fu l l value o f t h e Bid Security shall stand forfeited without prejudice to any other right or remedies in case my/our tender is accepted and if: -
I/We do not submit the Performance Guarantee within the time specified in the Tender document;
I/We do not execute the contract documents within seven days 10.3.2 after receipt of notice issued by the Railway that such documents are ready, and
I/We do not commence the work within fifteen days after receipt of orders to that effect.
( a ) I/We am/are a Start up firm registered by........................ Department of Industrial Policy a n d Promotion (DIPP) a n d my registration number is................ valid upto...................... (Copy enclosed) and hence exempted from submission of Bid Security.
We are a Labour Cooperative Society and our Registration No. is .................... with .......................and hence required to deposit only 50% of Bid Security.
Until a formal agreement is prepared and executed, acceptance of this tender shall constitute a binding contract between us subject to modifications, as maybe mutually agreed to between us and indicated in the letter of acceptance of my/our offer for this work.
TENDER FORM (SECOND SHEET) ANNEXURE-I
Instructions to tenderers and conditions of tender: -The following documents form part of Tender/Contract:
"Construction/Augmentation of Running Room at Shahdol and Bijuri & Combined Crew & Tm Lobby at Bijuri and Uslapur with allied and miscellaneous works in Bilaspur division of S.E.C. Railways".
CPM-ENGG-GSU-BSP-13-25-26~SECR
CPM-ENGG-GSU-BSP-13-25-26
Open
Works - General
12 Months
Bilaspur, Chhattisgarh
₹0
₹6.8 L
10 Mar 2026
11 Feb 2026
24 Feb 2026
266 items across 7 schedules · ₹11,81,80,191.91 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | All kinds of soil | Sqm | 600 | 107 | 64,200 |
| 2 | All kinds of soil | cum | 2882 | 205.45 | 5,92,106.9 |
| 3 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | cum | 1186.5 | 253.95 | 3,01,311.68 |
| 4 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. | cum | 125 | 368.65 | 46,081.25 |
| 5 | All kinds of soil | cum | 95.5 | 104.5 | 9,979.75 |
| 6 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. | cum | 161.63 | 2,161.2 | 3,49,314.76 |
| 7 | Chlorpyriphos emulsifiable concentrate of 20% | Litre | 9.55 | 200.9 | 1,918.6 |
| 8 | With Chlorpyriphos E.C. 20% with 1% concentration | Metre | 95.5 | 32.3 | 3,084.65 |
| 9 | 1:2:4 (1 cement : 2 coarse sand (zone- III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 55 | 7,365.15 | 4,05,083.25 |
| 10 | 1:3:6 (1 Cement : 3 coarse sand (zone- I I I ) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 326.63 | 6,833.4 | 22,31,993.44 |
| 11 | Foundations, footings, bases for columns | Sqm | 191.63 | 307.95 | 59,012.46 |
| 12 | Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification. | Per bag of cement of 50kg | 383.1 | 57.15 | 21,894.17 |
| 13 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm | 1344.94 | 307.95 | 4,14,174.27 |
| 14 | Suspended floors, roofs, landings, balconies and access platform | Sqm | 1534.25 | 766.55 | 11,76,079.34 |
| 15 | Lintels, beams, plinth beams, girders, bressumers and cantilevers | Sqm | 1168.63 | 608.35 | 7,10,936.06 |
| 16 | Columns, Pillars, Piers, Abutments, Posts and Struts | Sqm | 793.7 | 804.25 | 6,38,333.23 |
| 17 | Stairs, (excluding landings) except spiral-staircases | Sqm | 30 | 657.75 | 19,732.5 |
| 18 | Under 20 cm wide | Metre | 176.85 | 181.9 | 32,169.02 |
| 19 | Weather shade, Chajjas, corbels etc., including edges | Sqm | 61.07 | 814.95 | 49,769 |
| 20 | Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but , excluding cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). | cum | 14.55 | 9,673.5 | 1,40,749.43 |
| 21 | Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. | Metre | 253.25 | 64.7 | 16,385.28 |
| 22 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | 900 | 8,683.8 | 78,15,420 |
| 23 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | 1150 | 10,306.2 | 1,18,52,130 |
| 24 | Add for using extra cement in the items of design mix over and above the specified cement content therein. | Quintal | 400 | 688.45 | 2,75,380 |
| 25 | Cement mortar 1:4 (1 cement : 4 coarse sand) | cum | 292.3 | 6,882 | 20,11,608.6 |
| 26 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 650 | 6,658.25 | 43,27,862.5 |
| 27 | Cement mortar 1:4 (1 cement : 4 coarse sand) | cum | 171.9 | 8,414.65 | 14,46,478.34 |
| 28 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 269.1 | 8,190.9 | 22,04,171.19 |
| 29 | Providing and laying Autoclaved Aerated concrete(AAC) blocks masonry 100 mm/ 125 mm thick with Grade-1 AAC blocks of density 551 to 650 kg/cum conforming to IS:2185 (Part 3) in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand ). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work. | cum | 900 | 8,890.8 | 80,01,720 |
| 30 | Area of slab upto 0.50 sqm | Sqm | 96.63 | 4,679.35 | 4,52,165.59 |
| 31 | Area of slab over 0.50 sqm | Sqm | 249.83 | 4,425.35 | 11,05,585.19 |
| 32 | Granite work | Metre | 363.25 | 418.85 | 1,52,147.26 |
| 33 | Granite of any colour and shade | Sqm | 55 | 3,105.5 | 1,70,802.5 |
| 34 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 455 | 1,063.45 | 4,83,869.75 |
| 35 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 550 | 3,086.1 | 16,97,355 |
| 36 | 20 mm dia | Metre | 30 | 375.25 | 11,257.5 |
| 37 | 20 mm dia (heavy type) | Metre | 45 | 152.65 | 6,869.25 |
| 38 | 25 mm dia (heavy type) | Metre | 110 | 159.35 | 17,528.5 |
| 39 | With 2nd class teak wood beading 62X19 mm | Sqm | 150 | 1,164.9 | 1,74,735 |
| 40 | With 12 mm mild steel U beading | Sqm | 25 | 812.4 | 20,310 |
| 41 | 300x16 mm | Each | 110 | 180.55 | 19,860.5 |
| 42 | 250x10 mm | Each | 95 | 374.35 | 35,563.25 |
| 43 | 125 mm | Each | 66 | 205.1 | 13,536.6 |
| 44 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. | Each | 35 | 856.3 | 29,970.5 |
| 45 | 300x16 mm | Each | 20 | 260.3 | 5,206 |
| 46 | 300x10 mm | Each | 20 | 117.65 | 2,353 |
| 47 | 125 mm | Each | 38 | 60.05 | 2,281.9 |
| 48 | Twin rubber stopper | Each | 35 | 62.25 | 2,178.75 |
| 49 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer's specification and direction of Engineer- in-Charge. | Metre | 189.1 | 408.25 | 77,200.08 |
| 50 | 30 mm thick plain PVC door shutters | Sqm | 66.69 | 2,455.1 | 1,63,730.62 |
| 51 | Decorative finish (both side wood grained finish) | Sqm | 60 | 3,194.4 | 1,91,664 |
| 52 | Three track three panels sliding window made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 +/- 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) | Sqm | 300 | 9,183.3 | 27,54,990 |
| 53 | Ordinary cement without any pigment | Sqm | 341 | 1,185.3 | 4,04,187.3 |
| 54 | 25 mm thick | Sqm | 100 | 1,706.6 | 1,70,660 |
| 55 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. | Sqm | 130 | 935.6 | 1,21,628 |
| 56 | Size of Tile 600x600 mm | Sqm | 650 | 1,416.65 | 9,20,822.5 |
| 57 | Size of Tile 800x800 mm | Sqm | 950 | 1,879.95 | 17,85,952.5 |
| 58 | Size of Tile 600 x 600 mm | Sqm | 115.5 | 1,311.05 | 1,51,426.28 |
| 59 | 75 mm diameter | Metre | 66 | 213 | 14,058 |
| 60 | 110 mm diameter | Metre | 170 | 319.75 | 54,357.5 |
| 61 | 75 mm bend | Each | 22 | 91.8 | 2,019.6 |
| 62 | 110 mm bend | Each | 50 | 132 | 6,600 |
| 63 | 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) | Sqm | 20 | 1,145.95 | 22,919 |
| 64 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm | 95.5 | 671.55 | 64,133.03 |
| 65 | 1:4 (1 cement: 4 fine sand) | Sqm | 1741.55 | 294.85 | 5,13,496.02 |
| 66 | 1:4 (1 cement: 4 fine sand) | Sqm | 4320 | 339.7 | 14,67,504 |
| 67 | 1:3 (1 cement : 3 fine sand) | Sqm | 630 | 253.05 | 1,59,421.5 |
| 68 | Neat cement punning. | Sqm | 57.75 | 67.8 | 3,915.45 |
| 69 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. | Sqm | 4100 | 214.3 | 8,78,630 |
| 70 | New work (two or more coats) over and including water thinnable priming coat with cement primer | Sqm | 2200 | 162.55 | 3,57,610 |
| 71 | New work (Two or more coats applied @ 3.84 kg/10 sqm) | Sqm | 5500 | 97.6 | 5,36,800 |
| 72 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) | Sqm | 1620 | 166.85 | 2,70,297 |
| 73 | Two or more coats on new work | Sqm | 1350 | 131.45 | 1,77,457.5 |
| 74 | Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture | Sqm | 1547.75 | 191.4 | 2,96,239.35 |
| 75 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | Sqm | 5500 | 123.85 | 6,81,175 |
| 76 | With cement mortar 1:4 (1 cement : 4 fine sand) | Sqm | 25 | 462.3 | 11,557.5 |
| 77 | Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) | Sqm | 45 | 941.95 | 42,387.75 |
| 78 | Orissa pattern W.C Pan of size 580x440 mm | Each | 35 | 3,850.65 | 1,34,772.75 |
| 79 | Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per direction of Engineer-in-charge. | Each | 6 | 243.1 | 1,458.6 |
| 80 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) | cum | 5 | 2,007.1 | 10,035.5 |
| 81 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. | cum | 10 | 2,928.1 | 29,281 |
| 82 | In cement mortar | cum | 35 | 1,698.45 | 59,445.75 |
| 83 | Of area 3 sq. metres and below | Each | 2 | 302.7 | 605.4 |
| 84 | For thickness of tiles 10 mm to 25 mm | Sqm | 15 | 60.5 | 907.5 |
| 85 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | Sqm | 15 | 45.05 | 675.75 |
| 86 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. | cum | 165.5 | 219.35 | 36,302.43 |
| 87 | W.C. pan with ISI marked white solid plastic seat and lid | Each | 4 | 5,540.55 | 22,162.2 |
| 88 | One urinal basin with 5 litre white P.V.C. automatic flushing cistern | Each | 3 | 5,268.85 | 15,806.55 |
| 89 | Single half stall urinal with 5 litre P.V.C. automatic flushing cistern | Each | 25 | 10,128.3 | 2,53,207.5 |
| 90 | Single squatting plate with 5 litre P.V.C. automatic flushing cistern | Each | 1 | 7,752.6 | 7,752.6 |
| 91 | White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps | Each | 27 | 2,040.85 | 55,102.95 |
| 92 | White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap | Each | 19 | 1,679.6 | 31,912.4 |
| 93 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. | Each | 19 | 1,500.05 | 28,500.95 |
| 94 | 510x1040 mm bowl depth 250 mm | Each | 4 | 6,008.45 | 24,033.8 |
| 95 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. | Each | 4 | 299.35 | 1,197.4 |
| 96 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & m a k e as approved by Engineer in charge. (a) 15 mm nominal dia | Each | 5 | 6,119.15 | 30,595.75 |
| 97 | 32 mm dia | Each | 25 | 104.35 | 2,608.75 |
| 98 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | Each | 59 | 1,411.15 | 83,257.85 |
| 99 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. | Each | 47 | 942.15 | 44,281.05 |
| 100 | Sand cast iron S&S pipe as per IS: 1729 | Metre | 65 | 1,018.05 | 66,173.25 |
| 101 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. | Each | 40 | 146.3 | 5,852 |
| 102 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. | Each | 12 | 204.7 | 2,456.4 |
| 103 | 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. | Each | 16 | 600.35 | 9,605.6 |
| 104 | 25 mm nominal dia Pipes | Metre | 175 | 408.55 | 71,496.25 |
| 105 | 25 mm nominal dia Pipes | Metre | 63.2 | 626.05 | 39,566.36 |
| 106 | 15 mm dia nominal bore | Metre | 110 | 485.2 | 53,372 |
| 107 | 20 mm dia nominal bore | Metre | 110 | 541.1 | 59,521 |
| 108 | 25 mm dia nominal bore | Metre | 522 | 417.95 | 2,18,169.9 |
| 109 | 50 mm dia nominal bore | Metre | 585.5 | 654.2 | 3,83,034.1 |
| 110 | 15 mm nominal bore | Each | 40 | 303.85 | 12,154 |
| 111 | 15 mm nominal bore | Each | 23 | 303.85 | 6,988.55 |
| 112 | 25 mm nominal bore | Each | 10 | 532.35 | 5,323.5 |
| 113 | 50 mm nominal bore | Each | 25 | 878.25 | 21,956.25 |
| 114 | 25 mm nominal bore | Each | 22 | 399.15 | 8,781.3 |
| 115 | Horizontal | Each | 15 | 1,173.65 | 17,604.75 |
| 116 | 150 mm diameter | Each | 45 | 190.1 | 8,554.5 |
| 117 | 25 mm nominal bore | Each | 9 | 369.35 | 3,324.15 |
| 118 | 50 mm nominal bore | Each | 9 | 706.7 | 6,360.3 |
| 119 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | Litre | 17000 | 9.7 | 1,64,900 |
| 120 | 15 mm nominal bore | Each | 23 | 434.2 | 9,986.6 |
| 121 | 15 mm nominal bore | Each | 8 | 715.05 | 5,720.4 |
| 122 | 125 mm nominal dia with 25 mm waste hole | Each | 16 | 45.25 | 724 |
| 123 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. | Each | 10 | 96.75 | 967.5 |
| 124 | 300 mm dia piles | Metre | 1400 | 2,560.9 | 35,85,260 |
| 125 | 300 mm dia piles | Each | 240 | 2,182.6 | 5,23,824 |
| 126 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | Kg | 350 | 433.95 | 1,51,882.5 |
| 127 | Powder coated aluminium (minimum thickness of powder coating 50 micron) | Kg | 162.35 | 466.3 | 75,703.81 |
| 128 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | Kg | 350 | 531.8 | 1,86,130 |
| 129 | Powder coated aluminium (minimum thickness of powder coating 50 micron) | Kg | 162.35 | 564.8 | 91,695.28 |
| 130 | Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side | Sqm | 120 | 965.1 | 1,15,812 |
| 131 | Pre-laminated particle board with decorative lamination on both sides | Sqm | 62.75 | 951.05 | 59,678.39 |
| 132 | With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | Sqm | 43.88 | 1,019.8 | 44,748.82 |
| 133 | Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment). | Kg | 95.5 | 560.85 | 53,561.18 |
| 134 | Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) | cum | 48.43 | 7,510.75 | 3,63,745.62 |
| 135 | 200 mm nominal size dia | Metre | 140 | 951.95 | 1,33,273 |
| 136 | Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. | cum | 50 | 1,309 | 65,450 |
| Schedule total | ₹6,94,32,756.88 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .