GE P/DDN/T-17 OF 23-24

Amount

Excavation in trenches soft/loose soil not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth and getting out excavated soil/sand/unserviceable LT Cable for laying of cable and getting out.

Excavation in trenches hard dense soil not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth and getting out excavated soil/sand/unserviceable LT Cable for laying of cable and getting out.(For road cutting)

All as per srl No.1 but depth exc 1.5 mtr but not exc 3.00 mtr complete all as specified and directed.

Returning filling in including spreading leveling watering and well ramming in layers not exceeding 25 cm in hard /loose soil complete all as specified and directed by Engr-In-Charge.

Removing excavated material not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified.

M&L for Sand cushioning and covering of UG cable using crushed metal sand in trenches for cable protection all as specified

Supplying and laying Bricks common burnt clay building bricks, old size sub-class ‘A’ designation 75 in trenches as protection of under ground cable all as specified and directed.

M & L for Plain cement concrete 1:2:4 type B1 using 20mm graded aggregate for coping to pole foundation including necessary form work with fair finished surface all as directed.

M & L for Plain Cement concrete 1 : 4 : 8 type D2 using 40 mm graded stone aggregate for pole foundation, filling and mass concrete all as specified.

Supply and Install in replacement of Tubular steel poles swaged type & shall conform to IS 2713 (Parts 1 to 3) 1980 with CI base plate and finial taper plug, bolts, nuts & screws as specified type 410 SP-22, (8.50 Mtr long). Finials and base plate shall be of cast iron and conform to the details given in fig. 3 and 4 of the Standard (IS-2713 Part 1*3 of 1980). A through hole of 14 mm diameter shall be provided in each pole at a height of 300 mm above the planting depth for earthing arrangements. Protection Against Corrosion The poles shall be coated with two coasts of black bituminous paint throughout internally and externally up to the planting depth. The remaining portion of the exterior with one coat of red oxide/emulsion paint & two coat of aluminum paint to GI bracket for street lights and two coats of zebra marking with enamel from ground level and up to 1 mtr height including white washing the coping and cleaning the bushes surrounding the pole bottom up to 1 mtr width all as directed.

S & F GI Bracket for security lights made out of medium grade GI Pipe 50mm dia 1.5 mtr long bend to shape as directed, fixed on walls with two Nos MS clamp/saddles as required at site including nuts, bolts and washers and all as specified and directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

Supply and fixing LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

Supply and fixing LED street light fitting 100 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

Supply and fixing LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp.

Supply and fixing LED flood light 120 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp.

Supply and fixing post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete.

Supply and fixing LED flood light 250 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp. Make - Bajaj GLEAM F275L WH SY PC SD V2 or equi in Crompton/Wipro/Philips

Supply and fixing burrial LED type 20 watt 230 watt volts AC outdoor type with 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver complete. Make Philips-BBP343 LED1800/WW 18W 20D 100-240V or equi in Crompton/Bajaj/Wipro

Supply and fixing in repair Bollard lights new generation, energy saving, environmental friendly, long life aesthetically designed IP 54 die-cast aluminum landscape luminaries for downward lighting with high power 16W LED as light source with impact and corrosion resistant complete with driver and lamp complete. Make - Mushroom Light MUSHROOMBL16WLED730SSYMTOPC or equivalent in Bajaj/Crompton/Philips

S&F fuse box sheet metal enclosure made out of SMC junction box front openable and of size 300 X 250 X 100 mm having bakelite connector suitable for 3 phase and neutral link including MCB SP 6 amps fixed to pole with MS 25X3 mm GI clamps made to shape with required nut bolt washers etc. for street light fittings.

Taking out old unserviceable Service wire and Supply and fix 1100 volts grade heavy duty cable PVC insulated aluminum conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4 mm suspension wire, one twin core cable flat or circular complete all as specified for the following size 6.0 Sqmm size

ditto but 10.00 Sqmm size

Supply of MCCBs 32 A, 415V, 16KA, 4 Pole

Supply of MCCBs 63 A, 415V, 16KA, 4 Pole

Supply of MCCBs 100 A, 415V, 25KA, 4 Pole

Supply of MCCBs 160 A, 415V, 25KA, 4 Pole

Supply of MCCBs 200 A, 415V, 36KA, 4 Pole

Supply of MCCBs 250 A, 415V, 36KA, 4 Pole

Supply of MCCBs 400 A, 415V, 36KA, 4 Pole

Supply and fix in replacement on-load changeover switch 415 V, 4 pole, 125 A. Make- Cat pat no IHCNFO0125 of Havells/L&T/C&S

Supply and fix in replacement on-load changeover switch 415 V, 4 pole, 250 A. open execution Make- Cat pat no IHCNFO0250 of Havells/L&T/C&S

Supply and jointing Straight through joint for LT cable PVC/XLPE insulated armoured aluminum conductor of 1100 volts grade complete with jointing kit for the following size. 10-16 sqmm 3.5/4 core

25 to 50 Sq mm x 3.5 core

70 to 150 Sq mm x 3.5 core

185 to 300 Sq mm x 3.5 core

Supply & fix in replacement aluminum strip 25x3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground all as specified and directed.

Supply & fix in replacement galvanized iron strip 32 x 6 mm burried in ground all as specified and directed.

Supply & fix in replacement air termination single pointed aluminum rod 12mm dia and 300mm long all as specified and directed.

Supply & fix in replacement test point terminal block made of gun metal or phosphorous bronze size 75x75x25mm drilled and screwed including 3 nos 8mm dia 25mm long hex head screw all as specified and directed.

Supply and lay in replacement of UG cable XLPE insulated armoured and PVC sheathed LT 1100 volts grade with aluminum conductor stranded including taking up U/S LT UG cables from trench/poles/wall etc of following sizes :- (a) 10 Sqmm 2 core

(b) 10 Sqmm 4 core

(c) 16 Sqmm 4 core

(d) 25 Sqmm 3.5 core

(e) 35 Sqmm 3.5 core

(f) 50 Sqmm 3.5 core

(f) 70 Sqmm 3.5 core

(g) 95 Sqmm 3.5 core

(h) 120 Sqmm 3.5 core

(j) 185 Sqmm 3.5 core

(k) 240 Sqmm 3.5 core

(l) 300 Sqmm 3.5 core

M & L for grass cutting with the help of Petrol Grass cutting machine all around the installation of E/M.

Supply and fix in repair aluminum cables lugs for LT cables including necessary crimping with crimping tool complete all as specified and directed for the following size. (a) 10-25 Sqmm

(b) 35 Sqmm

(c) 50 Sqmm

(d) 70-95 Sqmm

(e) 120 -150 Sqmm

(f) 185 Sqmm

(g) 240 Sqmm

(h) 300 Sqmm

Supply and fix in repair aluminum cables sector connectors LT cables including necessary crimping with crimping tool complete all as specified and directed for the following size. (a) 10-25 Sqmm

(b) 35 Sqmm

(c) 50 Sqmm

(d) 70-95 Sqmm

(e) 120 -150 Sqmm

(f) 185 Sqmm

(g) 240 Sqmm

(h) 300 Sqmm

Supply, laying of Telerex DWC (double Wall corrugated) HDPE polyethylene pipe ISI marked including couplers, bends, cap etc. with smooth internal and profiled external surface for non pressure under ground cable complete all as specified of following size (a) Outer dia of 90 mm and inner dia 76 mm

(b) Outer dia of 120 mm and inner dia 103.5 mm

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ sub main wiring/ cable as required.

Supply, Testing and Commissioning installation, testing Commissioning of Automatic street light control system of 32A suitable for automatic switching of Street lights of 240V, 50Hz. 32A 3Pole/230V

Supply & fixing RGB LED-Ground: Ground Burial light 18/20Watt, 240Volts Compact and robust design with diecast aluminum housing and stainless trim, IP68 waterproof connectors. Make- Philips BBP343 LED RGB 18W 20D 240V or equivalents

M&L for painting of steel tubular 9 mtr long poles after preparing old paint surfaces with two coat of Aluminium paint and two coats of zebra marking with enamel paint from top of pole coping of approved color & up to 1 mtr high including white washing the coping and cleaning the bushes surrounding the pole bottom up to 1 mtr width all as specified and as directed.

Earthing complete with GI earth electrode of size 60cmx60cmx6mm buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground surrounded from all sides by 15cm thick and packed layer of charcoal dust and conmmon salt filling in alternate layers cleaned connected to and including GI earth strip 32 x 6mm size up to 7.5 mtr by means of bolts, nuts, check nuts and washers made of galvanized iron and protected light grade 50mm dia 5 mtr long GI pipe connected to main control board and GI pipe light grade 20mm bore for watering and including funnel wire mesh, RCC pit cover 50mm thick with 10mm dia reinforcement 100mm c/c and PCC chamber pit with pcc 1:2:4 Type C2 (including excavation and earth work disposal of surplus soil to a distance not exceeding 50 metre) and testing after completion all as specified and shown on plate No 3 of SSR Part -I 2009

Ditto as in above item, but using galvanized iron lead 4.0 sq mm as earthing lead and protection pipe 15 mm GI.

S&F Anti-climbing device spikes type fabricated out of M.S. bars (round, square and flat) including nuts, bolts, washers and welding in two halves made to shape to suit the cross section of the LT pole including painting with two coats of synthetic enamel black paint over a coat of red oxide.

Dismantling steel poles/ struts, any size and taking against schedule of credit.

Material and labour for replacement of existing unserviceable steel tubular swaged pole 9 mtr long with cast iron base plate, finial taper plug, bolts, nuts and screws as specified type 410 SP 21, including painting with anti corrosive paint internally complete and externally complete with two coat of synthetic enamel aluminum paint over a coat of red oxide primer and two coats of zebra marking with enamel paint from top of pole coping of approved color & up to 1 mtr high including white washing the coping and preparation of surface including marking of pole Nos with black paint complete all as specified and as directed.

S&F in repairs FRLS-H, PVC insulated unsheathed, 1100 Volts grade, single core copper conductor cable for day to day complaint 1.5 Sqmm in Red/Yellow,Blue.Black colour as required

Ditto as in item no._____above but size 2.5 sqmm

Ditto as in item no.____ above but size 4.0 sqmm

Material and labour for stone graded course aggregate of 63 mm grade nominal size without any vegetation or chemical including leveling /spreading surrounding HT/LT 2/4 pole structure, LT/HT panel complete all as specified directed .

Ansh Enterprises

Mahamaya Engineers Services