RequiredOEM Authorization Certificate Bid to RA enabled No Function Generator ( 2 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) MEASUREMENT FEATURES Frequency Bandwidth (Sine Wave) 10 mHz to 25 MHz 10 mHz to 25 MHz Number of channels 2 1
Required2 Standard Waveforms Sine
RequiredSquare
RequiredPulse
RequiredRam p
RequiredNoise
RequiredSin(x)/x
RequiredExpone ntional rise/fall
RequiredGussian
RequiredDC Offset * Band Width of Arbitrary Waveform 10 mHz to 25 MHz 10 mHz to 5 MHz
Required10 mHz to 25 MHz
Required10 1/4 Generator mHz to 100 MHz
Required10 mHz to 40 MHz
Required10 mHz to 50 MHz
Required10 mHz to 80 MHz Sample Rate of Arbitrary Waveform Generator (Mega Samples/sec) 200 50
Required200
Required250
Required500
Required1000
Required2000 Record Length of Arbitrary Waveform Generator (Kilo Points) 2000 16
Required64
Required128
Required250
Required500
Required1000
Required2000
Required4000 Waveform Memory of Arbitrary Waveform Generator (Waveforms) 4 * Vertical Resolution 14 * Amplitude Range (at 50 ohm impedance) 10mV to 10 V pp 10mV to 10 V pp Modulation AM
RequiredFM
RequiredPM
RequiredFSK
RequiredBurst
RequiredP WM
RequiredSweep * GENERIC Interface USB
RequiredGPIB
RequiredLAN * Display Type LCD * Display Size 3.5 * Any others features
Requiredif applicable - * ACCESSORIES Details of Standard Accessories To be supplied with the devices - * POWER SOURCE Power Requirements 230 V +/-10% AC
Required50 Hz +/- 3% * OPERATING CONDITION Minimum Operating Temperature 0 * Maximum Operating Temperature 50 * Operating Humidity (RH) at 40 deg C non condensing (%) 95 * SERVICE Warranty 3 5.0
Required4.0
Required3.0
Required3 CERTIFICATION & TEST REPORT DETAILS The equipment supplied with calibration certificate yes * conformity to Dry Heat for 16 hrs at a specified maximum temp in accordance with IS:900 0/part-3/section-5/1977 latest yes * 2/4 conformity to Cold Test for 4 hrs at a specified minimum temp in accordance with IS:900 0/part-2/section-4/1977 latest yes * conformity to Damp Heat (Cyclic)Test for 2 Cycles of 24 h each at a temp of 40 degree C & 95% RH yes * Availability of Test Reports from Central Govt/NABL/ILAC approved accredited lab to prove conformity to the specification yes * Test Report Number and date for the specification test (not a part of biddable parameter) - * Name and address of the Lab for the specification test (not a part of biddable parameter) - * * Bold specifications are the golden parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.