SPECIAL REPAIRS TO BLDG NOS P 79 AND P 405 AT MIL STN GANDHIANGAR

Amount

Removing rubbish to a distance exc. 1.5 Km but not exc. 5.0 KM out side MD land complete all as specified and directed.

M&L for plain cement concrete (1:5:10) type E-2 using 40 mm graded stone aggregate in filling into sunken floor and mass concrete complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate for padestal/coping around poles, including necessary form work, finishing even and smooth without using extra cement, all as specified and directed.

M&L for 25mm thick precast cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate as in louvers or jallies (measured solid), including all mouldings but excluding frame, set in cement mortar (1:4) complete all as specified and directed.

M&L for Brick work with old size, sub class 'B' bricks, straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for Brick work with old size, sub class 'B' bricks, straight or curved on plan any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.

Cutting chases, pinning in, making good to facings for concealed water tubing etc. cutting exceeding 10cm but not exceeding 20cm girth complete all as specified and directed.

M&L for cutting uneven surfaces of concrete & cutting reinforcement from drops of fins & facias (thickness not exceeding 50mm) using necessary scaffolding and making good the disturbed portion with 10mm thick rendering in CM 1:3 finished even and smooth without using extra cement etc. complete all as specifeid and directed.

S&F, 35 mm thick, 2nd class hard wood, factory made, glazed & skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. Sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24 (a) complete all as specified and directed.

S&F factory made 30mm thick flush shutters, solid core construction, with block board core and plywood face panles, commercial type on both sides complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames) exc. 1.5 Sqm but not exc. 4 Sqm each complete all as specified and directed.

S&F, factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per specifications complete all as specified and directed.

S&F aluminium anodised, barrel tower bolts of extruded section with length of bolt 150 mm and fixed complete all as specified and directed

S&F, aluminium anodised, barrel tower bolts of extruded section with length of bolt 200 mm and fixed complete all as specified and directed

S&F, in repair, aluminium anodised, barrel tower bolts of extruded section with length of bolt 200 mm and fixed complete all as specified and directed

S&F, aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy with length of bolt 300 mm and fixed complete all as specified and directed.

S&F, in repair, aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy with length of bolt 300mm and fixed complete all as specified and directed.

S&F, stainless steel butt hinges of size 100mm complete all as specified and directed.

S&F, butt hinges, medium weight, cold rolled, mild steel of size 100 mm complete all as specified and directed.

S&F, in repairs, butt hinges, medium weight, cold rolled, mild steel of size 100mm including necessary welding where required complete all as specifed and directed.

S&F extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed.

S&F, in repair, extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed.

S&F, single action spring hinges, mild steel with steel wire spring, stove enameled black, size of spring hinge 150mm all as specified and directed.

S&F, in repair, single action spring hinges, mild steel with steel wire spring, stove enameled black, size of spring hinge 150mm all as specified and directed.

S&F, brass, chromium plated tubular towel rail 20mm dia 60CM long between flanges complete all as specified and directed.

S&F, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

M&L for screed bed 15mm thick on fair faces of concrete surface in cement mortar (1:3) mixed with using water proofing compound by weight of cement as per manufacturer instructions, finished even and smooth without using extra cement for laying APP membrane at non -accessible roof (mumty) complete all as specified and directed. Note:- Supply only liquid water proofing compound shall be measured and paid separately.

M&L for water proofing treatment to existing non-accessible roof slab by applying one coat of cold bituminous primer @ 0.30 litre/sqm and confirming to IS-3384, laying APP based polystr modified membrane reinforced non wooven polyster of 3.50 kg/sqm (minimum) 3mm thick with plain polythene finished and sealing all the overlap 75mm in length side and 100mm in width side of membrane by torching including applying one coat of bituminous aluminium paint over membrane and taking down existing water proofing treatment with bedding layer and land complete all as specified and directed.

Supply only, liquid water proofing compound complete all as specified and directed.

S&F, 0.63mm mild steel plain black sheet in hearths covering in door shutters covering to door chowkhat cut to size edges beaded if directed holes punched including round headed screws clout nails or reivets and fixed to steel members etc. with plain sheet 40mm lap joints or welded reverted seam including bending turning up, mitred angles, stopped ends, outlet etc complete all as specified and directed.

M&L for rolled mild steel angle iron work as in door frames complete, drilled for fixing of hinges etc. also fastening and fixing conforming to Fe-290 (Gde-E-165) complete all as specified and directed.

S&F factory made steel ventilators with top and side hung shutter including hinges, steel peg stay, glazing bars including applying one shop coat of red oxide primer all as specified and directed

S&F, Aluminium anodised doors/windows/ventilators with one or more rebates including joining cleat for fixing etc complete with frames, shutters and grills of size directed by Engineer-in-charge including handles, tower bolts, grills, etc complete all as specified and directed. Note:- Floor door spring, sheet glass, wire cloth, lock, etc shall be measured and paid seperately.

S&F, 0.63mm thick plain galvanized mild steel sheeting in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 all as sp[ecified and directed.

M&L for cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3, all as specified and directed.

S&F, 20mm htick bitiminous board strips 30cm width fixed bitumen crumple joint complete all as specified and directed.

M&L for machine cut kota stone slab, 550x600mm, 20-25mm thick as in flooring over and including screed bed of 15mm thick in CM (1:6), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer-in-charge.

M&L for machine cut kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar laid over and including rendering 10mm thick in cement mortar (1:4), jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for 15 to 18mm thick black granite stone salb (table rubbed and polished) in cooking platform steps, jambs, pillars, window cills and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture and pigment to match with the shade of granite.

Rounding to edges of stone slabs one edge, such as steps, cooking plateform, and other similar situations complete all as specified and directed.

M&L for 50mm thick cement concrete 1:3:6 type C1, using 20mm graded stone aggregate as in plinth protection, finishing cement concrete surfaces even and smooth without using extra cement, Joints of plinth protection shall be filled with bitumen mastic (1:3) complete all as specified and as directed.

M&L for 100 mm thick cement concrete (1:3:6) type C-2 using 40 mm graded stone aggregate as in sub base of flooring/hard standing, path and finishing the surface even and fair without using extra cement complete all as specified and directed.

M&L for 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate in sub base to receive floor finishes complete all as specified and directed.

M&L for 40mm thick (average consolidated thickness) cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate laid in slope 1:30 on roof as in padding, finished even and fair complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for Coloured glazed ceramic tiles of size 300 x 450 x 7mm thick, on vertical wall surface, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 450mm x 300mm x 7mm on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over and including rendering 10mm thick in cement mortar (1:4) , complete all as specified and directed.

M&L for non skid coloured ceramic tiles, 7 to 8 mm thick, (square/rectangular), area of each tile exceeding 0.06 sq.m but not exceeding 0.11 sq.m in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including including screed bed or bedding layer of 15 mm thick cement mortar (1:6) complete all as specified and directed.

M&L, Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tiles exceeding 0.11 sqm but not exceeding 0.18sqm, in floors etc. set & jointed in net cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete as specified and directed.

M&L for coloured non skid ceramic tiles, 7 to 8 mm thick, (square/rectangular), area of each tile exceeding 0.18 sq.m but not exceeding 0.38 sq.m in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of 15 mm thick cement mortar (1:6) complete all as specified and directed.

M&L, for machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size conforming to IS 15658- 2006 of 60mm thickness, M-35 grade including 25mm thick (compacted thickness) sand cushion below paver blocks complete all as specified and directed.

M&L for chequered cement concrete tiles 20 cmx20 cmx25 mm thick, with grey cement and pigment, set, jointed and pointed in neat cement slurry over and including 15 mm thick screed bed in CM (1:6) as in floor complete all as specified.

Taking down cement plaster on brick or stone wall etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L for rendering cement plaster 10mm thick in cement mortar (1:6) on brick work or concrete surfaces of walls, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering cement plaster 10mm thick in cement mortar (1:3) on brick work or concrete surfaces of walls, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering cement plaster 5mm thick in cement mortar 1:4 on fair faces of concrete in ceilings, chajjas, fins facia etc. finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparing old plastered or un-plastered surfaces and applying one coat of white wash on walls complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of white cement as primer complete all as specified and directed.

M&L for preparation of old plastered surfaces of wall and applying one coat of cement base paint complete all as specified and directed.

M&L for preparing new plastered or un-plastered surfaces of walls and applying two coats of oil bound distemper over and including chalk whiting on walls complete all as specified and directed.

M&L for preparing old plastered or un-plastered surfaces and applying one coats of oil bound distemper on walls complete all as specified and directed.

M&L for preparing old plastered or un-plastered surfaces and applying one coat of white wash on ceiling complete all as specified and directed.

M&L for preparing old plastered or un-plastered ceiling surfaces and applying two coats of white wash complete all as specified and directed.

M&L for preparing new plastered or un-plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed.

S&F, 5mm thick, black tinted glass panes fixed to aluminium doors/windows/vents with necessary rubber gaskets complete all as specified and directed.

M&L for 3mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc. 0.5sq.m in each pane complete all as specified and directed.

M&L for preparation of new wooden surface of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M&L for preparation of new steel surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over existing shop coat of primer complete all as specified and directed.

Taking up or down steel tubing and connections for 15mm bore of pipe complete all as specified and directed.

Taking up or down steel tubing and connections for 20mm bore of pipe complete all as specified and directed.

Taking up or down steel tubing and connections for 25mm bore of pipe complete all as specified and directed.

Taking up or down steel tubing and connections for 40mm bore of pipe complete all as specified and directed.

S&F, steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 15mm bore of pipe complete all as specified and directed.

S&F, steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 20mm bore of pipe complete all as specified and directed.

S&F, steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 25mm bore of pipe complete all as specified and directed.

S&F, steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 40mm bore of pipe complete all as specified and directed.

Refixing old serviceable steel tubing and connections in new or old position (walls, ceilings, floors etc.) for 15mm bore of pipe complete all as specified and directed.

Refixing old serviceable steel tubing and connections in new or old position (walls, ceilings, floors etc.) for 20mm bore of pipe complete all as specified and directed.

Refixing old serviceable steel tubing and connections in new or old position (walls, ceilings, floors etc.) for 25mm bore of pipe complete all as specified and directed.

Refixing old serviceable steel tubing and connections in new or old position (walls, ceilings, floors etc.) for 40mm bore of pipe complete all as specified and directed.

S&F, in repair, 32mm bore, low density polyethelene pipe (LDPE) of pressure rating 6kgf/sq.cm fixed to walls, ceilings or in floors etc. complete all as specified and directed.

S&F, 40mm bore, high density polyethelene pipe (HDPE) of pressure rating 6kgf/sq.cm fixed to walls, ceilings or in floors etc. complete all as specified and directed.

Supplying, hoisting, fixing in position and connecting, in repairs, 1000 litres capacity rotational moulded polyethylene water storage tank (cylindrical, vertical with closed top) including fixing arrangement for inlet/outlet/over flow and vent pipe of standard size all as specified in SSR Part-I complete all as specified and directed.

Disconnecting, setting aside (or lowering if required) and Cleaning & removing all scale and dirt etc from HDPE water tanks of 1000 litres capacity (Tanks placed on top of roof) and from mouths of circulating pipes etc including washing the tank with bleaching powder and hoisting, reconnecting and re-fixing in position including writing the date of cleaning of tank with synthetic enamel (black/white) paint of size not less than 10cm of each letter complete, all as specified and directed.

S&F, in repair, bib taps, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule of 15mm bore complete all as specified and directed.

S&F, in repair, bib taps, cast copper alloy, fancy type, chromium plated, screwed down, screwed for iron pipe or brass ferrule of 15mm bore complete all as specified and directed.

Supply only pillar taps cast copper alloy with capstan head, chromium plated, screwed down high pressure, with or without lettered ‘hot’ or ‘cold’ with long screwed shanks and fly nuts, screwed for iron pipes 15mm bore complete all as specified and directed.

S&F, in repair, pillar taps cast copper alloy with capstan head, chromium plated, screwed down high pressure, with or without lettered ‘hot’ or ‘cold’ with long screwed shanks and fly nuts, screwed for iron pipes 15mm bore complete all as specified and directed.

S&F, in repair,stop valves, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes or for unions of 15mm bore complete all as specified and directed.

S&F, Gun metal, globe or gate valves, with iron wheel head, screwed both ends for 20mm bore of iron pipe and fixed all as specified and directed.

S&F, in repairs, Gun metal, globe or gate valves, with iron wheel head, screwed both ends for 25mm bore of iron pipe and fixed all as specified and directed.

S&F, in repairs, Gun metal, globe or gate valves, with iron wheel head, screwed both ends for 40mm bore of iron pipe and fixed all as specified and directed.

S&F in repair, concealed angular stop cock with flange of size 15mm bore complete all as specified and directed. Make : Cera/Prayag/Parco/Gem or equivalent make.

Taking down Aluminium/steel ventilators/ventilator including grills of any description, n.exc 1.5 Sqm each complete all as specified and directed.

S&F, in repair, 25mm dia, powder coated, fancy type, aluminium decorative tubular curtain rod with decorative ball type side brackets complete all as specified and directed.

S&F, in repair, flush cock, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes or for unions of 25mm bore complete all as specified and directed.

S&F, in repair, corner glass shelf with CP brackets and with decorative railing fixed to wall complete all as specified and directed. Make : Jaquar, Cera or equivalent as approved by GE.

Supply only 32mm, waste fittings, brass chromium plated for glazed ware sink, basins, etc. with long screw shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F, in repair, 20mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed.(Minimum weight -210 Gms)

S&F, 40mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed.(Minimum weight -690 Gms)

S&F, Grating, square, 150mm size of PTMT (minimum weight 100gms) complete all as specified and directed.

S&F, in repair, only PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F, 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints laid in trenches or floor complete all as specified and directed.

S&F, 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints laid in trenches or floor/walls complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including stack clamp complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including stack clamp complete all as specified and directed.

S&F, 75mm bore PVC (SWR) bend, any radius with access door complete all as specified and directed.

S&F, 110mm bore PVC (SWR) bend, any radius with access door complete all as specified and directed.

S&F, PVC (SWR) floor trap, with chromium plated grating including jointing with solvent cement, dia of outlet 75mm complete all as specified and directed.

S&F, in repair, brass chromium plated shower rose with or without swivel joint, 125mm size complete all as specified and directed.

S&F, in repairs, vitreous china squatting pan, 'Orissa’ pattern, white of size 580mm x 440mm with integral foot rest, P or S trap (excluding flushing cistern and flush pipe) including plain cement concrete (1:5:10) type D-2 using 40 mm graded stone aggregate as in filling in sunken portion etc. complete all as specified and directed.

S&F in repair, vitreous china bowl urinal flat back, of size 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing flush pipe grating and union for discharge pipe. (exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.

S&F, in repair, 10 litres capacity, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet ball valve, float and handle including brackets and connection to pipe or lever etc. complete all as specified and directed.

S&F, in repair, vitreous china wash basin, white, flat back of size 550mm x 400mm including brackets grouted in cement mortar 1:2 in wall complete all as specified and directed. Note :- Supply only pillar taps, waste fittings, PVC connection, PVC waste pipe shall be measured and paid separately.

Supply only, PVC waste pipe 32mm bore of size 450mm to 600mm long complete all as specified and directed.

S&F, 32mm dia High density poythelyne (HDPE) pipes of pressure rating 6kgf/sqm as in waste pipe for urinal, sink, etc

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc. complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and pavings n exc 15cm thickness (below or above ground level) complete as specified and directed.

Demolition for roof, floors, (other than ground floors), beams, stairase, landing, chajjas and similar work suspended works etc complete all as specified and directed.

Dismantling of reinforced cement concrete of roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed.

Dismantling of cast iron, PVC or reinforced concrete drain pipes jointed in cement mortar for 110mm and 75mm bore of pipe from wall/floors etc complete all as specified and directed.

Taking down carefully unserviceable copper/aluminium point wiring (Light, fan, socket or power) complete including unserviceable fittings and fixtures such as switches, ceiling roses, pendents, regulators, sockets, lamp holders, brackets, except ceiling fittings, bulk head fittings, tube light fittings etc. and making good the disturbed surfaces of walls, floors, etc. complete all as specified and directed.

M&L for wiring with and including multistranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number drawing through in and including medium grade, rigid non metallic PVC concealed conduit of 20mm bore and including cutting chases for conduits and sinkings for boxes, its accessories and including with multistranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number as continuity earth wire terminating with new modular sunken concealed terminal boxes complete all as specified and directed for the following :-

(a) One light/fan point controlled by one switch

(b) One multi pin 5 Amps, socket outlet on Independent board.

(c) One multi pin 5 Amps, socket on the same board.

S&F, lamp holder, PVC/Polycarbonate, with back plate suitable for batten fittings complete all as specified and directed

S&F, socket outlet, 2 in 1, 3 pin, 5 Amps, flush type complete all as specified and directed

S&F, switch piano, flush button, single pole, one way, 5 Amps complete all as specified and directed

S&F, in repairs, sheet metal distribution board, factory made and tested complete, protection class IP-42 suitable for mounting MCBs, isolator with 200 A tinned copper bus bar of capacity 200 Amps of 4 way 240 Volt complete all as specified and directed

S&F, in repairs, sheet metal distribution board, double door factory made and tested complete, protection class IP-42 suitable for mounting MCBs, isolator with 200 A tinned copper bus bar of capacity 200 Amps, SPN, 8 way 240 Volt complete all as specified and directed

S&F, in repairs, sheet metal distribution board, double door factory made and tested complete, protection class IP-42 suitable for mounting MCBs, isolator with 200 A tinned copper bus bar of capacity 200 Amps, SPN, 12 way 240 Volt complete all as specified and directed

S&F, ceiling rose, 3 terminal , any shade, of PVC/Polycarbonate, isolated body complete all as specified and directed

S&F, in repairs, miniature circuit breakers, single pole, 6 to 32 Amps, 240 volts with 'B' Curve, fixed in sheet metal board complete all as specified and directed. Make : Havells/Legrand/Schneider.

S&F, in repairs, miniature circuit breakers, single pole netural, 40 Amps, 240 volts with 'B' Curve, fixed in sheet metal board complete all as specified and directed. Make : Havells/Legrand/Schneider.

M&L for ceiling fan regulator, electronic step type, AC 230 Volt complete all as specified and directed. Make - Anchor/Vinay/Havells.

S&F, in repair, MCCB Three pole and neutral, 63 Amps, 25 KA breaking capacity suitable for 415 volts, 50 Hz, 3 phase thermal magnetic release complete all as specified and directed.

S&F, in repairs, sub-main wiring with 2 single core, 4 Sqmm PVC insulated, unsheathed, 1100 Volts grade, copper multi stranded conductor drawn in and including PVC concealed conduit and conduit assessories including drawing one run of PVC insulated, unsheathed, 600/1100 Volts grade, copper conductor multi stranded, 4 Sqmm size as continuous earth wire drawn through and connected to main switch/DB and testing on completion complete all as specified and directed. Note: (i) 2 runs of main conductor, one run of earth conductor and one run of PVC casing and caping shall be measured as one unit length. (ii) Rates quoted shall be inclusive of cutting wall for concealing conduit and making good the same in cement mortal 1:3, Make - Havells/Plaza/Ppolycab

S & F in repair Distribution Board Power line VTPN , 4 way, 415 volts, factory made powder coated, double door with neutral and earth link, including with 3 pole MCCB 63 Amps rating ,10KA breaking capacity for incoming supply and 12 Nos single pole MCBs for out going supply complete all as specified and directed.

Taking down existing ceiling fan and keeping in safe custody and re-installation the same after completion of work complete all as specified and directed.

S&F, in repair, LED light fitting retrofit, batten type, housed in extruded from powder coated aluminium, 20 Watt connected with three core copper conductor cable of suitable size and testing complete all as specified and directed as per make Bajaj or equivalent make as approved by GE from the makes specified under Appx 'C'.

ARTI CONSTRUCTION

Ramdev and Sons

DATTA SURYAKANT CHAUDHARI

Shree Builders

Shreeganesh Construction

nevi constructions

New Tech Projects India