SPECIAL REPAIR TO CERTAIN ROADS AND ROAD FURNITURE ALONGWITH ROAD PAINTNG UNDER AGE B/R-I GE (KH) YOL.

Amount

Scarifying or picking gravelled, macadam or bituminous macadam surfaces, depth not exceeding 50mm deep and area not exceeding 400sqm, stacking the serviceable material at site and removing the surplus material to a distance not exceeding 50m complete all as specified and directed.

Repair to pot holes any depth not exc. 1 Sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, path etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal watering & well ramming, complete all as specified and directed.

Repair to pot holes any depth not exc. 1 Sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, path etc. cutting around edges to at least 25mm in depth, making good by applying tack coat @ 5 Kg/10 Sqm, putting in premixed bituminous premix semi dense asphaltic concrete 40mm consolidated thickness with 5.5% binder content by weight of total mix using 20mm crushed stone aggregate rolled and compacted to required camber and gradient with 8 to 10 tonne power roller for depth of pot holes exceeding 30mm complete all as specified and directed.

Providing premix bituminous macadam (consolidated thickness 75mm or less) with 4% binder content of paving bitumen by weight of total mix, rolled and compacted to required camber and gradient with 8 to 10 tonne power roller, complete all as specified and directed. Note:- Bituminous macadam shall be mixed in hot mix plant, transported and shall be laid in single layer with self propelled mechanical paver, rolled with vibrator roller.

Preparing unsurfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally the cleaned surfaces with power sweeper or compressor to remove all loose dirt etc, applying evenly a priming/ tack coat with bituminous primer using paving bitumen @ 10 kg per 10 sq metre of road surface complete all as specified and directed.

Preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surfaces with power sweeper or compressor to remove all loose dirt etc., applying evenly a priming/ tack coat with bituminous primer using paving bitumen at 5 kg per 10 sq metre of road surface, laying bituminous premix semi dense asphaltic concrete 40mm consolidated thickness with 5.5% bitumen binder content by weight of total mix using 20mm crushed stone aggregate, rolled and compacted to required camber and gradient with 8 to 10 tonne vibrator power roller, complete all as specified and directed. Note:- Bituminous premix semi dense asphaltic concrete shall be mixed in automatic temperature controlled hot mixing plant, transported and premix carpet shall be laid in single layer with self propelled mechanical paver, rolled with vibrator roller.

Cat eye two way reflective ABS body of size 100mm x 100mm x 18.5mm with reflective panel (Amber red or white) , weight 133 Grams fixed with and including MS stud of suitable size as per manufactures instructions complete all as specified and as directed. Make: 3M, SHAKTI, DARKEYE.

Metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed. Make: 3M, SHAKTI, DARKEYE.

Convex mirror 1000 mm dia made of polycarbonate material fixed on existing mild steel pipe post complete all as specified. Make: 3M, SHAKTI, DARKEYE.

Preparing bituminous/concrete surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements using hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 mixed with radium glass beads @ 250gm/ Sqm with special applicator machine to provide reflectivity and night vision (approx temp being 200°C at the time of laying) including cleaning the surface of all dirt, dust and other foreign material complete all as specified. Note:- Road marking lines at the centre of road shall not be continuous, whereas the lines at outer sides of road shall be continuous i.e in one length.

Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 cm thick above or below ground level complete and disposal of unserviceable material, debris and rubbish to a distance not exceeding 100m complete all as specified and directed.

75mm thick PCC 1:3:6 type C-2 (using 20 mm graded crushed stone aggregates) as in floor finish, surface finished even and fair without ssing extra cement complete all as specified and directed.

Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.

Providing precast cement concrete in cement concrete 1:3:6( nominal mix ) type C-1 (using 20mm graded stone aggregate) as in win dow or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat ing etc. and setting in mortar 1:6 complete with joints to match complete all as specified and directed.

Preparation of old concrete/plaster surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed.

M/S vp sharma