REPAIR TO ROAD AND ROAD SIDE FURNITURE OF TECHNICAL AND RESIDENTIAL AREA OF DEAL, IRDE AND CQA (I) UNDER GE(I) RND DEHRADUN

Amount

M&L repair to pot holes of any depth n. exc. 1 Sqm each including sweeping free from dust & mud or water scoring sunken surfaces in roads, paths etc. cutting around edges to at least 25 mm in depth and making good by and applying evenly a priming tack coat with bituminous primer (Viscosity Grade Bitumen VG- 30) @ 5 kg per 10 sqm, putting in premixed bituminous macadam, well rammed and sealed with binder (Viscosity Grade Bitumen VG-30) 9.8 Kg/10 Sqm, blinded with 0.09 Cum of stone chipping, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chipping), depth of pot hole exc 30 mm complete all as specified and directed.

M&L Preparing surface of existing black top surfaces by brushing with wire brushes, for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose/dirt etc and applying evenly a priming tack coat with bituminous primer (Viscosity Grade Bitumen VG-30) @ 5 kg per 10 sqm with mechanical sprayer and providing bituminous premix semi dense asphaltic concrete, 40 mm thick (consolidated thickness) with 5.5 % binder content by weight of total mix (including bitumen), using Viscosity Grade Bitumen VG-30, rolled and compacted to required camber, gradient and super elevation with power roller 8 to 10 tonne complete all as specited and directed. Note:- The mixed materials for Premix Carpet shall be obtained from approved HOT MIX Plant and shall be laid with Mechanical Paver.

M&L for Preparation of new/old road surfaces and applying thermoplastic reflective paint in marking of minimum 1.5 mm thick single coat as in centre line and edge line, zebra crossing etc road marking of 150/100 mm width using ‘HOT MARK thermoplastic paint (Hot Application) by indigenous modern propelled road marking machine as directed including all ingredients such as blinder, glass beads Titanium dioxide calcium carbonate inter filler, thermoplastic requirement for glass beads shall be the table No 800.4 of MOST specification including spraying of glass beads etc all as per manufacture’s instructions complete all as specified and directed .

S & F in repair Cat eye ABS body with scratch and abrasion resistant micro prismatic polycarbonate and ultrasonically welded lens temperature resistant body and lens with high impact strength of size 91mm x 117mm x 17mm (Avery Dennison ) Feixed with Bitumen Adhesive BI-69 complete all as specified and directed. (Make: SIGNTECH or other equivelent model from of 3M, Dark Eye,shakti make as approved by GE).

S&F in repair Solar Stud body made from alluminium alloy. Solar powered by monocrystal solar panal (1.2V/3watt). Type of battery : One high capacity Ni-Cd rechargeable battry (1.2V/1600MA) LEDs: 10mm, total 6 pieces 3 on each side. View distance appx 1000 mtrs 12 hours of continous lighting at night. Mounted on concrete or road size 125mm x 125mm x 25mm (60mm shank) with 06 LED's 03 on each side complete all as specified and directed. Cat part No :- SS-02 of Make SIGNTECH or other equivelent model from 3M, Dark Eye, shakti make as approved by GE.

S&F in repair Delineator made out of 40 mm bore 'light grade' MS pipe of length 750 mm duly powder coated in colour bends high in density micro-prismatic grade retro-reflective fittings has the tip of pipe 100 mm red with upper and lower border of 25 mm yellow sheepping). The fitting portion protected by MS jali fixed on road side (in embedded in PCC 1:3:6 of size 40cm x 40cm x 40 cm) including necessary earth work complete all as specified and directed. Make : Kiwalite Industry, 3M Company, Nautanial & Sons or equivalent all as specified and approved by Accepting Officer.

S&F in repair Speed breakers made of sturdy plastic moulded in ABSPC Alloy - highly resistant to severe impacts and harsh weather condition, dovetail interlocking in subunits to make it bind perfectly and studded with reflector on either side, bottom portion to be filled with rich concrete. Fixing of speed breakers to be done with 04 Nos bolts on each piece & bottom portion applied with heavy duty apoxy and to meet the AL-1005 specification all as per manufactureres instruction complete all as specified and directed.

Demolition of plain cement concrete ( Un reinforced) / paver block of any description in any position and removal of demolished materials to a distance exceeding 500 M but not exceeding 1000m complete all as specified and directed.

M&L Plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate as in foundation filling & Mass concrete , sub base including Demolition of plain cement concrete ( Un reinforced)of any description in any position and removal of demolished materials to a distance exceeding 500 M but not exceeding 1000m complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block of approved colour and shape, glossy finish, any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade over and including 30 mm thick Sand cushioning including watering and consolidation complete all as specified and directed.

Sharda Enterprises

M/S BRIJPAL SINGH MALIK

M/S P K ARORA