Re-Construction of Vahanasala at Sri Madana Gopala Swamy Temple, Mallipudi (V), Penumantra (M), West Godavari District.

Earth work excavation for foundations (Manual Means) of buildings, septic tank, sump, compound wall in ordinary soils and depositing on bank with an initial lead of 10m and depth up to 3m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work excluding seigniorage dewatering charges etc., as per SS 20 B(APSS 308)

Filling with carted coarse sand in trenches,sides of foundations and basement with Initial lead In layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal, incidental labour charges, hire charges of T&P excluding seniorage charges, and overheads & contractors profit complete for fnished item of work(APSS NO.309&310)

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402)

VRCC M-20 grade nominal mix (cement :fine aggreegate: coarse aggregate) corresponding to table 9 of IS456 using 20mm size graded machine crushed hard granite metal (coarse aggreegate)from approved Quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc, to site, and excluding seigniorage charges, sales and other taxes on all materials including all operational incidental and labour charges such as machine mixing, laying concrete, curing etc., complète but excluding cost of steel and its fabrication charges for finished item of work but excluding centering shuttering and including overheads & contractors profit etc., complete for fnished item of work

Roof Slab 125mm thick

Bell type Sunshade 2,6 wide

Providing High Yield Strength Deformed (HYSD) (Fe 415 grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., and overheads & contractors profit complete for finished item of work in all floors.(APSS No.126)

Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with water proofing compund manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials and operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of, wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903).

Brick masonry for panel walls in superstructure with CM (1:6) prop: (Cement: Screened sand) using common burnt clay bricks of class as per Table- 1 of IS:1077-1992, Non-Modular or traditional size 23 x 11 x 7 cms from approved source having minimum crushing strength of 35 Kg/Sqcm. including cost and conveyance el all materials like cement, screened sand, bricks, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc., and overheads & contractors profit complete for finished item of work. (APSS No. 501 & 504).

Ornamental brick work in C.M. (1:5) using common burnt clay bricks prop: (Cement Screened sand) using common burnt clay bricks of class as per Table- 1 of IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from approved source having minimum crushing strength of 50 Kg/Sqcm using bricks, bats and flat tiles including cost and conveyance of all materials like cement, sand, bricks etc to site exluding seigniorage charges, excluding scaffolding for construction of masonary but including lift charges and soaking the bricks in clean water atleast an hour immediately before use, including overheads and contractors profit charges, curing, sales and other taxes on all materials etc., complete for finished item of work.

Ornamental plastering 25mm to 40mm thick with base pleastering 12mm to 20 mm in C.M. (1:3) and top finishing 12mm thick with C.M. (1:2) to bring the required ornamentation including fine rendeing with neat cement cost and conveyance of all materials, labour charges, all incidental and operational charges curing etc., complete for finished item of work excluding seinorage charges, sales and other taxes on all materials in site for external surface as per approved drawings and as directed during execution including preparation and fixing precast pillars, Kudam, Palakai, Vedika, Lathalu in Uttara Elduhakam, Pothikas, Nasigudu, Pupha Puskala, Adihishtanam whereever necessary and including overheads and contractors profit charges, sales and other taxes on all materials etc., complete for finished item of work.

Providing and fixing Providing and fixing 35mm thick BRAND FACTORY MADE |MOULDED DOOR SHUTTER consisting of sold core single leaf flush door of 30mm thickness, lipped with 15mm (5mmX3) thick X 3Omm width on one stiles and top rails and 10mm (5mmX2) thick X 30mm width on the other stiles and bottom rails. The inner panel laminated with 2mm thick termite proof, water proof and fire resistant |moulded Pac sheet with 2,4,6 raised panel design in different panel and/ or prelam colours on one side after routing the moulded iesign on flush door and 2mm prelam |Pac sheet on other side using rubber adhesive on flush door and solvent cement adhesive on Pac lipping etc. complete as per direction of Engineer-in-Charge, manufacture specification and drawing and Providing and fixing factory made Pac single side Prelam door frame of the size S0X47 mm with a wall thickness of Smm, made out of ext ruded 5mm rigid Pac single side prelam sheet, meter cut at two corners and joined with 2nos. of 150mm long brackets of 1515mm MS.Square tube. The two vertical door profiles are to bel reinforced with 19X19mm MS. square tube of 19guage. The door frame shall be fixec to the wall using 65/100mm long MS. Screws Ithrough the frame by using Pac fasteners. a minimum of 4nos. of screws to be provided vertical member and minjmu 2nos. for horizontal member etc. anacture specification and including overheads and contractors profit charges, sales and other taxes on all materials etc., complete for finished item of work.

Supplying and fixing of Rolling shuter made of 80x1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accesssories and including overheads and contractors profit charges, sales and other taxes on all materials etc., complete for finished item of work. as per special spn. 1108

Plastering 12mm thick single coat in CM(1:3) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and including overheads and contractors profit charges, sales and other taxes on all materials etc., complete for finished item of work. (SS 901,903 & 904)

Plastering 12mm thick single coat in CM(1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and including overheads and contractors profit charges, sales and other taxes on all materials etc., complete for finished item of work. (SS 901,903 & 904)

Plastering 20 mm thick single coat in CM(1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and including overheads and contractors profit charges, sales and other taxes on all materials etc., complete for finished item of work. (SS 901,903 & 904)

Flooring with Double charged/Multi Charged stain free full body porcelain vitrified tiles with double layer pigment of size 600x600mm and thickness between 8-10mm 1st quality conforming to IS 13711 & 113712 &IS13630 of any colour and finish in all shades and designs. as per the approved flooring pattern as directed by the Engineer- In-Charge, laying tiles using spacers of 2mm thick, set over a base coat of CM (1:8) prop. 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey lille consistancy spread @ 3.3 kgs per Sqm.and jointed neately with white cement paste to full depth mixed with pigment of matching shade including cost and conveyanc of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) including cost of seigniorage charges on all materials, cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge etc.,and including overheads and contractors profit charges, sales and other taxes on all materials etc., complete for finished item of work. (APSS No.701 & 707)

Providing skirting to internal walls to 10 cm height/risers of steps with vitrified tiles with matt finish of size 600x600 mm and thickness between 9-10 mm 1st quality 1st quality conforming to IS 13711 & 113712 &IS13630 length equal to flooring stones, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like! 5 consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment bf matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete excluding seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials. & Cantra polit

Supply and application of one coat of deco orient base & two coats of acrylic exterior emulsion paint having VOC( Volatile Organnic Compound) content less than 50 grams/litre for exterior walls including cost and conveyance of all materials to size, sales & other taxes, incidental, operational and all labour charges etc, and overheads & contractors profit complete for finished item of work in all floors.