Annual maintenance work for Set/Reset & Repairing of footpath with c.c. Kerb , paver block & Guard Stone And Providing Stone Water table in Nana Varachha, Sarthana and New Added Gamtal Area in New East Zone-B (Sarthana) (II Attemept).

Name of Work:- Annual maintenance work for Set/Reset & Repairing of footpath with c.c. Kerb , paver block & Guard Stone

And Providing Stone Water table in Nana Varachha, Sarthana and New Added Gamtal Area in New East Zone-B (Sarthana)

S.O.R. 2024-25 (Rate without GST & With Cess)

ITEM Quantity Per Amount

Excavating the road surface upto required depth including removing the excavated

1 materials and depositing on the road side upto 50 mt lead etc. complete and as 250.00 109.41 C.M.

directed by Engineer-in charge.

Dismantling of Structures on Roadway, including Disposal of Unserviceable Matrial

2 and Utilising the Serviceable materiel free of Cost in Permanent Works as Directed by

the Engineer with all Leads and etc. Complete

(A) Brick/Stone Masonry 10.00 577.92 C.M.

(B) Plain Concrete 150.00 639.72 C.M.

(C) R.C.C. Pardi/Reinforced Concrete 10.00 1110.75 C.M.

(D) Bituminous Pavement 50.00 288.65 C.M.

(E) Non-Bituminous Pavement 10.00 155.25 C.M.

Preparation of subgrade with compacting, levelling and consolidation of subgrade

3 with miniroller / plate vibrator machine including watering and filling in depressions 7500.00 5.03 S.M.

which occur during the process as directed by engineer in charge.

Providing and laying cement concrete 1:5:10 ( 1 Part of cement:5 Part of coarse

4 sand: 10 Part of graded stone aggregate of 40 mm nominal size) in 75 mm thick and 400.00 2606.92 C.M.

curing complete excluding cost of formwork etc. complete.

Providing and laying cement concrete 1:2:4 (1 Cement : 2 coarse sand, 4 graded

stone aggregate of 20 mm nominal size) including providing and fixing reinforcement

5 as specified in drawing with necessary bending, binding and placing in position and

also including form work of sheating of steel sheet so as to form necessary centering

shuttering proping etc. complete and as directed by Engineer-in-charge.

(A) R.C.C. Kerb 450 mm depth and 100 mm width 10.00 608.99 R.M.

(B) R.C.C. Kerb 300 mm depth and 100 mm width 300.00 437.49 R.M.

Removing /Resetting of 100 mm thick readymade C.C. kerb M-20 (size 300mm x

380mm) and setting in line level and in truly vertical position including filling joints in

6 C.M. 1:1 (1: Part of cement : 1 Part of stone dust) smooth pointing in C.M. 1:1 (1 500.00 56.00 R.M.

Part of cement : 1 Part of coarse sand) including watering etc. completed and

directed by Engineer-in-charge.

Providing and laying/fixing cement concrete cast-in situ/Precast kerb in M-20 grade

as per drawing and as per details in tender specification, Purchsed from SMC's

approved manufactures list. Setting in line, level and in truly vertical position,

including filling joints 10mm width in C.M. 1:1 (1 Part of cement 1 part of coarse

7 sand) smooth pointing in C.M. 1:1 (1 Part of cement : 1 Part of stone dust) including

watering, test required to be carriedout etc. Complete and as directed by Engineer-

incharge). including all leads, lifts, loding & unloding, watering, labour, tests required

to be carried out, achinery, equipments required to execute this item etc. complete.

(H- Height, Wwidth, t-thickness)

Removing and resetting Existing paver block, including all watering leveling,

8 cleaning, labour & Equipments chagres etc. complete as per details in tender 7500.00 102.00 S.M.

specification & as directed by engineer in charge.

Providing 100 mm thick readymade C.C. kerb of strength M-20 (size 300mm x

380mm) purchased from S.M.C.'s approved paver block manufacturer and setting in

line level and in truly vertical position including filling joints in C.M. 1:1 (1: Part of

cement : 1 Part of stone dust) smooth pointing in C.M. 1:1 (1 Part of cement : 1 Part

of coarse sand) including watering etc. completed and directed by Engineer-in-

For regular edge of footpath 2500.00 228.00 R.M.

For rounding at the edge of footpath (For fanning portion) 20.00 274.00 R.M.

ITEM Quantity Per Amount

Providing and fixing interlocking type Rubber Moulded cement concrete paver

block of approved shape, design and colour having 60 mm thickness (M-35)

purchased from SMC's approved paverblock manufactuer only and fixing on fine

sand bedding. Item includes levelling by using vibratory plates compacted machine.

Item also includes all material colour, equipments, tools, plants, watering, cleaning

a with colour 900.00 524.00 S.M.

b Without colour 4600.00 524.00 S.M.

c With Colour (Produced by C&D waste) 10.00 408.50 S.M.

d Without Colour (Produced by C&D waste) 20.00 376.25 S.M.

Supplying and filling fine sand (Pana/Stone Dust/ Crush Sand) in 25/75 mm (Avg.)

compacted thickness over the base including necessary compaction, watering etc.

complete. Item includes levelling by using vibratory plates compacted machine and

as directed by Engineer - in-charge

Providing and laying Granular Sub Base (drainage layer) conforming to grading V of

Table 400-1 of each layer not exceeding 200mm thickmess and compacted thickness

as per design & drawing with specified graded stone metal and sand mixed in pugmill

and laid with mechanical means spreading with motor grader and compacting with

vibratory roller having minimum 80-100 kN static weight to achieve desired density

of 98% of MDD including all materials, labour, machinery,tests required to be carried

out with all leads and lifts etc., complete as per details in tender specification & as

directed by engineer in charge.

Providing and setting 35 to 50 mm thick rough kotah stone paving for footpath in

line, level and if required gradient including 25 mm thick beddcing in C.M. 1:6 (1 Part

of cement : 6 Part of coarse sand) with sufficient ramming consolidation. Providing

joints in C.M. 1:3 (1 Part of cement : 3 Part coarse sand) and smooth pointing in C.M.

1:1 (1 Part of Cement, 1 Part of coarse sand) including watering etc. complete and as

directed by Engineer-in- charge.

Removing and resetting rough kotah stone paving for footpath in line, level and

proper gradient including 25 mm thick bedding in CM 1:6 (1 Part of Cement, 6 Part of

14 Coarse sand) with sufficient ramming, consolidation. Providing joints in C.M. 1:3 (1 5.00 155.51 S.M.

Cement : 3 Coarse sand) and smooth pointing in C.M. 1:1 (1 Cement : 1 Coarse sand)

including watering etc. complete and as directed by Engineer-in-charge.

Removing and resetting rough kotah stone water table for footpath in line, level

and proper gradient including 25 mm thick bedding in CM 1:6 (1 Part of Cement,

15 Part of Coarse sand) with sufficient ramming, consolidation. Providing joints in C.M. 5.00 63.89 R.M.

1:3 (1 Cement : 3 Coarse sand) and smooth pointing in C.M. 1:1 (1 Cement : 1 Coarse

sand) including watering etc. complete and as directed by Engineer-in-charge.

Dismentalling carefully existing sewer trap chamber upto required depth and

raising the same upto new footpath level with B.B. masonary in C.M. 1:6 (1 Part of

16 Cement: 6 Part of coarse sand) including 12 mm thick cement plaster in C.M. 1:3 (1 5.00 659.87 No.

Part of Cement: 3 Part of coarse sand) and fixing C.I. cover etc. complete and as

directed by Engineer-in-charge.

Supplying and fixing RCC collar (300 mm dia) for tree plantation including all taxes,

17 carting, loading, unloading etc. complete.with all labour, material charge etc. 2.00 60.00 No.

complete as per details in tender specification & as directed by engineer in charge

Tree guard ID 500mm, 800 x 800 x 75 mm (Type D) (Set 4) 10.00 672.00 No.

Providing and laying cement concrete cast-in-situ Guard Stone (1:2:4) (1 cement :

coarse sand : 4 graded stone aggregate of 20 mm nominal size) including cost of

form work including, curing labour,machinery, equipments required to execute this

item etc. complete. Size :- (750 X 350 X 400)

Providing and laying cement concrete cast-in-situ Guard Stone (1:1.5:3) (1 cement :

1.5 coarse sand : 3 graded stoneaggregate of 20 mm nominal size) including cost of

form work including, curing labour,machinery, equipments required toexecute this

item etc. complete. Size :- (600 x 225 x 400)

Providing and fixing in position readymade cement concrete Water Drain Slab (

20 300 x 300 x 80 mm ) M-30 Grade with all labour, material, testing charge etc. 200.00 189.00 R.M.

complete as per details in tender specification & as directed by engineer in charge.

a Readymade water drain channel (600 x 300 x 100) 50.00 353.00 R.M.

ITEM Quantity Per Amount

Providing cutting of existing bituminous surface up to suitable depth in line and

alignment using mechanically operator cutter machine before excavating existing

surface for utility laying including cost of all type of machinery, fuel , labour , etc and

as per direction of engineer in charge.

Excavation for 27 cm wide and 25 cm deep Gishi in Ashpalt Bitumeneous road for

erection of concrete wall as a road devider and removal of all excavated materials asphalts

etc. from the site as per details in tender specification & as directed by engineer in charge

at the cost of contractor.

Painting two coats of enamel paint (Excluding priming coat) over previously painted

23 wall after removing entire surface with even shade & surface after removing dirt, 100.00 65.31 S.M

dust foreign matter etc. comp.(M.R.)

Painting one coats (Excluding priming coat) on previously painted steel and other

24 metal surface with synthetic enamal paint, brushing to give an even shade including 100.00 38.03 S.M

cleaning the surface of all dirt, dust and other foreign matter.

For every subsequent coat Extra over item no.above 100.00 38.18 S.M

Painting two coats of enamel paint over priming coat (including priming coat) on

25 wall after removing entire surface dirt, dust foreign matter & also incl. preparing the 100.00 90.00 S.M

surface even & sand papered smooth etc.comp.(M.R.)

Applying priming coat over new steel and other metal surface after over and

including preparing the surface by throughly cleaning oil, grease dirt and other

foreign matter and scoured with brushed fine steel wool, scrapers and sand paper

with ready mixed priming paint brushing red lead.

Supply and Fixing of Flexible Median Marker (FMM) from a combination of

tough, high impact resistant engineering thermoplastic material with U

shape structure having rebound/bounce*back property having overall height,

width and body thickness not less than 181mm, 120mm, and 6.5mm

respectively. The flourscent yellow retro reflective sheeting meeting ASTM D4956

27 Typ-XI specifications, in the FMM helps to highlight the medians and increase the 300.00 271.69 No.

visibility during the night. The flexible Median Marker should have integrated shank

having depth of min 30mm and a dia min 20mm fixed by drilling a hole on the kerb

for the shanks to go inside, without nails and using epoxy resin based adhesive

as per manufacturer's recommendation and complete as directed by engineer

in charge.(3M or Equivalent Brand)

GRANT TOTAL RS.

EXECUTIVE ENGINEER,

NEW EAST(SARTHANA) ZONE-B

SURAT MUNICIPAL CORPORATION

SIGNATURE OF THE CONTRACTOR: