Repairs to certain wooden furniture including polishing and painting at Kannur and Calicut under AGE (I) Cannanore.

Amount

M&L for removal of unserviceable decayed cane plastic of any size from chair dining CB without arms and recanning with new cane of 2 mm wide half rounded cane and 3.5mm cane in border as per Godrej pattern complete all specified and directed.

All as per Srl item No 1 above, but for chair writing.

All as per Srl item No 1 above, but chair CB Office.

All as per Srl item No 1 above, but chair easy.

M&L for removal of unserviceable ply wood of bed in any position, S&F new 12mm thick ply wood, BWR grade, ISI marked of size 1980mm x 900mm including fixing in same position all as shown on drawing with suitable size screws & cup washers and polishing with two coats of french polish complete all as specified and directed.

M&L for removal of existing unserviceable stiffners, rails, frame from chair writing including arms of chair CBA and S&F 1st class hard wood stiffner, rails, frame of existing pattern and finishing with one coat of french polish complete all as specified and directed.

M&L for removal of dirt with sand paper or caustic soda where necessary from almirah medium with shelves wooden, filling holes with putty, preparing surface smooth and polishing all external surfaces with two coats of French polish complete all as specified and directed.

All as per Srl item No 7 above but almirah large with shelves wooden.

All as per Srl item No 7 above but book case/book shelf

All as per Srl item No 7 above but bed hard

All as per Srl item No 7 above but table writing/table 3 ' x 3 ' .

All as per Srl item No 7 above but table dinning 8 pers/6 pers.

All as per Srl item No 7 above but table office officers wooden.

All as per Srl item No 7 above but table bed side.

All as per Srl item No 7 above but table offce clerk.

All as per Srl item No 7 above but table 3’x 2’ with drawer/without drawers.

All as per Srl item No 7 above but table dressing gents with mirror

All as per Srl item No 7 above but table dressing ladies with mirror

All as per Srl item No 7 above but teapoy wooden

All as per Srl item No 7 above but Peg table wooden

M&L for replacement of old unserviceable seat/back cushions, S&F new foam cushion of size 530mmx560mmx100 mm thick of 32 density duly covered with malmal cloth and tapestry cloth of approved quality/colour/ texture including stitching complete all specified and directed.

M&L for repairs to locker bed side wooden by replacing back side with 6mm thick plywood (one side teak face) and front side 25 mm thick panelled shutter of first class hard wood with 8mm thick veneered particle board insertion, 4 Nos of 75mm long Aluminium hinges ( 2 Nos for each shutter) and 2 Nos of 100mm long Aluminium handle and 1 No 100mm size Aluminium hasp and staple including finishing with two coats of French polish complete all as specified and directed

M&L for removal of existing unserviceable plywood seat from chair WB without arms and S&F new ply wood seat of 8 mm thick commercial plywood BWR grade ISI marked with screw as per drawing complete all as specified and directed.

M&L for removal of existing unserviceable front rail, side frames, legs from chair WB/CB and S&F 1st class hard wood front rails, side frames, legs complete all as specified and directed .

M&L for removal of unserviceable plywood on head board and foot board of hard bed and S&F new plywood of 12 mm thick Gde 1, veneered decorated on both sides, 6 mm thick beading of 1st class hard wood all-round of head board and foot board and including removing old legs and re-fixing the same after repair all as per drawing complete all as specified and directed .

M&L for removal of unserviceable long rail of hard bed and S&F new long rail of 1st class hard wood all as per drawing complete all as specified and directed.

All as per srl No 26 above, but S&F Front side/Head Board complete with decorative plywood 6 mm thick all as per drawing complete all as specified and directed.

All as per srl No 26 above, but S&F Rear side/foot board complete with decorative plywood 6 mm thick all as per drawing complete all as specified and directed.

M&L for replacing the unserviceable aluminum hasps and staples, 100 mm long of locker bed side wooden including necessary fixing screws complete all as specified and directed.

M&L for replacing the unserviceable aluminum door handle 100 mm long of locker bed side wooden including necessary fixing screws complete all as specified and directed.

M&L for replacing the unserviceable stainless steel hinges 75 mm long of locker bed side wooden including necessary fixing screws complete all as specified and directed.

M&L for preparation of old wooden surfaces smooth and clean and applying two coats of French polish for chair dining /chair writing /chair barrack /chair CBB and CBA to glossy finish all as specified and directed

M&L for removing unserviceable top of table wooden of size 900mmx900mm and S&F table top with 18 mm thick pre-laminated particle board one side teak face exterior grade with 4 mm thick teak wood edging alround and including dismantling existing legs and re-fixing after repairs all as specified and directed.

All as per srl item No 33 above, but table of size 900 mm x 600 mm

All as per srl item No 33 above, but table office offrs wooden.

All as per srl item No 33 above, but table office Clk wooden.

All as per srl item No 33 above, but table 600x 600 mm wooden.

All as per srl item No 33 above, but table Table dining 6/8 persons

Repairs/replacing to almirah large wooden back side with 9mm thick commercial ply wood ISI marked, front side 20 mm thick panel shutter of 1st class hard wood frame with 8mm thick veneered pertical board pannel insertion, 4 Nos 100 mm long stamless steel butt hinges (2 nos in each shutter), 02 Nos 150mm long aluminium handle, 01 No 150mm stainless steel hasp and staple and replacing shelves/bottom with 25mm thick 1st calss hard wood planks and finished with two coats of french polish to new wooden member complete all as specified and directed

All as in items No 39 above, but almirah medium wooden.

Removing unservicale top layer of computer table top and supply and fix new sunmica top of approved quality and fixing by applying fevicol all as specified and directed.

Removing unservicale mirror from table dressing Gents with frame and supply and fix new mirror of approved quality as specified and directed.(Drg No FD-379).

Removing unservicale mirror from table dressing Ladies with frame and supply and fix new mirror of approved quality as specified and directed.(Drg No FD-251).

Removing unserviceable castor wheels from computer chair/table and supply and fix new castor wheel of approved quality all as specified and directed

Removing unserviceable PVC handle/Cushion from computer chair and supply and fix new PVC handle of approved quality all as specified and directed

Repairs to Locker wooden (FD-222) by replacing unserviceable back side cover with 6mm thick plywood (one side teak face), front side with 25mm thick panelled shutter of first class hard wood frame and 8mm thick veneered particle board insertion and replacing unserviceable wooden shelves with first class wood plank, 4 Nos of 75mm long aluminum hinges ( 2 Nos for each shtter) and 2 Nos of 100mm long alluminium handle and 1 No. of 100mm aluminium hasp and staple including finishing with two coats of French polish complete all as specified and directed.

Removing unserviceable cushion seats from chair dining officers (MAP) and supplying and fix new cushion seats of 40 denisity duly covered with malmal cloth and tapestry cloth of approved shade and qualilty including stiching complete all as specified and shown on drawing.

Repairs to Bin Soiled linen large/Small (FD-244/15) by repalacing unserviceable back side cover with 6mm thick plywood (one side teak face), front side with 25mm thick top cover with first class hard wood frame and 8mm thick veneered particle board insertion including finishing with two coats of french polish and caning to front side with new cane of godrej pattern of approved quality complete all as specified and shown on drawing.

Removing unserviceable teak wood from Side board wooden (FD-372) of size 1500x450x760mm and supply and fix new 18mmx18mm teak wood bearer, 19mmx25mm teak wooden stopper and 1.5mm thick plastic laminated sheet over 19mm thick particle board top, including finishing with two coat of french polish completed all as directed.

Yash enterprises

B AND H CONSTRUCTIONS