SPL REPAIR TO ROAD AND ROAD FURNITURE AT DIFFERENT LOC OF THAKURBARI MIL STN AT CERTAIN LOCATIONS UNDER GE(N) TEZPUR

Amount

Scarifying or picking gravelled, macadam or bituminous macadam surfaces, exc 50mm and n exc 100mm deep and in area not exc 400 Sqm and disposal to distance n exc 50 m complete all as specified and directed

M & L for repair to pot holes of any depth not exceeding 1 Sqm each including sweeping free from dust and mud of water scoring sunken surface in road etc, cutting around edges to at least 25mm in depth making good by applying tack coat with bituminous primer @ 5Kg per 10 sqm, putting in premix as specified for thin bituminous carpet (2 cm thick) well rammed and sealed with premixed sand seal coat (9.8 Kg/10 Sqm of binder with 0.09 cum of stone chippings 6.3 mm size) again well rammed (including supply of premixed macadam and binder and chipping) septh of potholes n exc 30 mm complete all as specified and directed.

M&L for 75 mm thick (compacted thickness) WBM, with coarse aggregate (basalt type of aggregate) of grading 2 (63 to 40 mm size) or of grading 3 (50 to 20mm size) spread, rolled and consolidated to required gradient and camber with 8 to 10 ton power roller incl preparing unsurfaced WBM by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc and applying evenly a priming/tack coat with bitumen primer @ 10 kg/10 Sqm (paving bitumen grade VG-30) complete all as specified and directed.

M&L for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer (paving bitumen grade VG-30) @5 kg/ 10 Sqm complete all as specified and directed

M&L for Bituminous premix semi-dense asphaltic concrete (SDAC) 40 mm consolidated thickness with 5.5% binder content of which (Paving bitument VG 30 @ 92 % and 8 % waste plastic) by wieght of total mix providing and laying with mechanical paver and compacted with 8 to 10 tonne capacity power roller to required gradient and camber complete all as specified and directed. Note :- Minimum bitumen content shall be 5.5% as specified here in above. Please note that if the actual qty of bitumen to be incorporaed on approval of job mix formula is found more than minimum bitumen content specified above. No prisce adujstement shall be for acutal bitumen content of mix design bitumen shall be paving bitumen of Graded VG-30 and shall be procured by the contractor

M & L for providing and applying 2.0mm thick road marking strips (retro reflective) with glass beads 300gm/Sqm of specified shade/colour using hot thermoplastic material by fully/semi automatic thermoplastic material applicator machine filled with profile shoe, glass beads dispensers, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P cleaning the road surface of all dirt, seals, oil, grease and foreign materials etc., complete all as specified and as directed

S & F in repair two way reflective cat eye of size 100mm x 100mm x 18-19 mm made with PVC body with reflective panels Amber/Red/White fixed to road surfaces with the help of adhesive and screw, complete all as specified and as directed by Engineer-in-charge.

NOTES :- 1. For the items for which specifications not mentioned any where in the tender, the IRC specifications shall be followed. 2. Unless otherwise specified the rates for PCC shall deemed to include the cost of formwork shuttering etc., required for complete and proper execution of the work. Refer Schedule "A" notes for details.

LUIT CONSTRUCTION

M/S K.K.TRADERS