Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹28.5 LAccepted-AOC | 1 | Accepted-AOC L1 BIDDER | |
| 2 | 2₹29.8 L+₹1.3 L (4.45%)Rejected-AOC | 2 | Rejected-AOC L2 BIDDER |
Tender Value
₹31.2 L
EMD Value
₹62,320
Closing Date
23 Dec 2023, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GENERAL MANAGER
AMMUNITION FACTORY KHADKI, PUNE
REPAIRS TO DAMAGED TOILET BLOCK AND SEWAGE LINE INSIDE FACTORY AT AFK UNDER SWACHH BHARAT ABHIYAN.
2023_MIL_174764_1
GM/AFK/EO/DC/985R/2023-24
Open Tender
Civil Works
Item Rate
270 days
AMMUNITION FACTORY KHADKI
Please refer Tender documents.
5 documents required · 5 mandatory
₹0
₹62,320
11 May 2024
17 Nov 2023
26 Dec 2023
17 Nov 2023
23 Dec 2023
17 Nov 2023
Amount
Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level).
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.
Demolition of brickwork built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles
Taking down cement or cement lime plaster on brick or stone walls etc including raking out joints, hacking for kay, scrubbing down with water etc.
Taking down chowkhats or frames not exc. 1.5 sqm each and removing the same to CW section store
Taking down existing chowakts or frames exc 1.5 Sqm but not exc 4 Sqm each with shutters (without taking off shutters from the frame).
M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in CM 1:4 including finishing the surface even and smooth without using extra cement
M&L for providing cement concrete type I (M-15) 1:2:4 mix (20mm graded aggregate) in foundations, filling and mass concrete fair finished.with necessary centering
M&L for screed bed or bedding layer of mortar 20mm thick for laying floor finishes in CM 1:4
M&L for Non-skid coloured cermaic tiles 7mm to 8mm thick (joint free) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match. (Make- Johnson, Kajaria, Bell).
M&L for Glazed Ceramic coloured tiles in vertical suraces 300 x 200mm x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match. (Make- Johnson, Kajaria, Bell).
Excavation in trenches n. exe 1.5m wide and n. exe 1.5 in depth; for foundation etc . exe or for manholes etc n. exc 10 sqm on plan and n. exe 1.5m depth and getting out in :- Hard/ Dense soil.
S&F Vitreous China squatting pan 'Orissa' pattern size 630mm x 450 mm white, with integral foot rest (excluding flushing cistern and flush pipe) fixed in trap etc. complete. Make: Hindustan/ Parryware/ cera
S&F PVC ( SWR) P trap bore 110/110mm
S&F PVC (SWR) WC connector bore of pipe 110mm.
S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flushpipe) etc. complete. Make: Hindustan/ Parryware/ cera
Supply and fixing plastic water closet seat and cover for pedastal pan, closed pattern with flat bottom etc. complete
S&F PVC vavleless syphonic action type, flushing cistern, low level 10 liters capacity, coloured / white, with inlet ball valve, float and handle, including brackets and flush pipe of polythene or PVC 32mm dia connection to pipe and fixing lever if any etc.completeMake/manu : Commondar/Water bird/Slim line.
S & F Health Faucet (ABS body)mild steel Chromium Plated suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook including making connection & fixed in position complete all respect as specified
S&F vitreous china wash basin, flat back, size 630mm x 450mm white, exculding taps, waste, chain and plug and porocelain stopper but including cutting for and pinning in ends of brackets. (Make/manu : Parryware/ Hindustan/ Cera ).
S&F of Flush pipe of polyethylene of low or high density or PVC 32mm dia, for low level cistern/wash basin/urinal.
S&F Pillar taps fancy type, cast copper alloy chromium plated screwed down high pr. with or without lettered 'hot' & 'cold' with long screw shank and fly nuts, screwed for pipe, bore dia of pipe 15mm.
S&F 15mm Stop Valves/Gate ( ISI Mark) fancy type chromium plated , cast copper alloy , screw down , high pressure with crutch or butter fly handle screwed both ends for iron pipe and fixed
S&F Vitreous China bowl urinal flat back, size of 465 x 355 x 265mm white (minimum) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, flush pipe, with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe).
S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms)
S&F waste fittings brass chromium plated for glazed ware sinks, basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed loose of pipe 32mm.
S&F PVC connection 15mm size with PTMT nuts of length 450mm.
S &F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screw and wooden / plastic cleats (Minimum weight 190gms)
S &F Liquid soap container of PTMT fixed with and including Chromium plated brass screw and wooden / plastic cleats ( Minium weight 105gm)
S&F Grating square 150mm size of PTMT (minimum weight 100gms)
S&F Bib taps cast copper alloy chromium plated with crutch or butterfly handle screwed down, screwed for iron pipes or brass ferrule and fixed, bore dia of pipe 15mm.
S&F low density polyethylene (LDPE) pipes or pressure rating 6 kgs/sq.cm fixed complete to walls, ceiling or in floors etc. for waste pipes bore of tube 32 mm.
Taking up or down steel water tubing and connections, including cleaning for refixing or removal to store for bore of pipe 15mm
Taking up or down steel water tubing and connections, including cleaning for refixing or removal to store for bore of pipe 20mm
Taking up or down steel water tubing and connections, including cleaning for refixing or removal to store for bore of pipe 25mm or 32mm
Cutting holes into or through brick walls/ stone walls built in cement mortar and making good in cement mortar or cement concrete 1:2:4 Type B-1 as required for superficial area of hole exceeding 150 sq cm but n Exc. 400 sq cm.
M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in brick walls
M&L for steel water tubes 'medium grade' galvanised, with all fittings and fixed complete to walls and ceiling or laid in floors for bore of pipe 15mm. Make: Tata/ Jindal
M&L for steel water tubes 'medium grade' galvanised, with all fittings and fixed complete to walls and ceiling or laid in floors for bore of pipe 20mm.
M&L for steel water tubes 'medium grade' galvanised, with all fittings and fixed complete to walls and ceiling or laid in floors for bore of pipe 25mm.
S&F PVC multi floor trap with grating including jointing to waste pipe with solvent cement diameter of outlet = 75mm.
S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, bore of pipe 75mm.
S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, bore of pipe 110mm.
S&F PVC (SWR) bends any radius with access door bore of pipe 75mm.
S&F PVC (SWR) bends any radius bore of pipe 75mm.
S&F PVC (SWR) junction (single T )equal or unequal with access door bore of pipe 110mm.
S&F PVC (SWR) bends any radius bore of pipe 110mm.
S&F PVC (SWR) junction (single Y )equal or unequal with access door bore of pipe 110mm.
S&F PVC (SWR) junction (double Y )equal or unequal with access door bore of pipe 110mm.
M&L for Granite (of any type) work (table rubbed and polished) 20mm thick for wall lining (veneering to wall) and for wall/floor/washbasin area 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.
M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete
M&L Pre-cast cement concrete block masonary Type C1 1:3:6 20mm graded aggregate solid Block exc 10cm in width and setting in motar complete cement motar 1:6
S&F Mild steel of grade Fe 410-W (Gde-E - 250) in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat section) including distance pieces, cleats etc.
M&L for 6mm thick Asbestos cement, corrugated or semi corrugated sheets in roof walls etc fixed with L hook or cranked bolts.
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. Make - TATA/JSW/ESSAR
Supply and Fixing aluminium louvered ventilator, the louvered blade of 3mm thick figured glass 100mm wide, each blade riveted to jamb & at a distance of 65mm centre to centre.
M&L for 3.0mm thick figured glass, pin head type and glazing with oil putty in square n. exc 0.5sqm in each pane.
S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube complete in all respect and directed as per Engg-in-Charge.
S&F Factory made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, with wood free EPS fixed in frame at site. Complete and directed as per Engg-in-Charge.
S&F Flush shutters 30mm thick, solid core construction, with block board core and plywood face panels, and both face covered with decorative face vener with lipping/ frame to match.
S&F for extruded aluminium alloy butt hinges Type B-21 with galvanised mild steel hinge pin, anodised and fixed. Size of hinges 100mm.
S&F for extruded aluminium alloy handles, fabricated type, anodised. Size of handle 150mm.
S&F aluminium anodised barrel tower bolts of extruded section and fixed, length of bolt 150mm.
M/L Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed bolt=150mm.
M&L for preparing plastered or unplastered old surfaces and applying two coats of Dry Distemper on walls.
M&L for preparing plastered or unplastered old surfaces and applying two coats of white wash on ceiling.
M&L for preparing plastered or unplastered old surfaces and applying two coats of cement paint on walls.
M&L for preparing old painted surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint on wood or wood based surfaces.
Removing surplus excavted and demolished material to a distance exc 1.5 km but n exc 5.00 km and depositing where directed. Soil, rock, P.C.C.
Dismantled Door frames and shutter exc 1.5 Sqm but not exc 4 Sqm
M/S Hrushikesh A. Patil
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .