REPAIR/ MAINTENANCE OF STAND BY DG SETS AND OTHER CONNECTED ITEMS AT TRANSIT CAMP PALCHAN.

Amount

Taking out of the unseviceable / repairable parts from the engine with due care, and supply / fixing of the following new and original spare parts including carrying out all related minor and periodical maintenance and ovehauling works as and when required suitable for DG SET OF CAPACITY 15 KVA Kirloskar Engine) installed at 217 Transit Camp under AGE(I) R & D Manali and all as specified and as directed by the Engineer-in-charge.

Ignitor assembly

Battery 12 Volts 100 AH

Taking out of the unseviceable / repairable parts from the engine with due care, and supply / fixing of the following new and original spare parts including carrying out all related minor and periodical maintenance and ovehauling works as and when required suitable for DG SET OF CAPACITY 30 KVA Kirloskar Engine Model HA494, installed at 217 Transit Camp under AGE(I) R & D Manali all as specified and as directed by the Engineer-in-charge.

LO Filter

Diesel Filter

FUEL PIPE

Air filter assembly

Ignitor assembly

Cylinder head assembly

Piston assembly

Ring set

Head gasket

Coupling set and gasket

Main Bearing set

Large End Bearing set

Self starter 12 Volt

Charging alternator

Temperature Gauge

Pressure Gauge

Taking out of the unseviceable / repairable parts from the engine with due care, and supply / fixing of the following new and original spare parts including carrying out all related minor and periodical maintenance and ovehauling works as and when required suitable for DG SET OF CAPACITY 30 KVA Kirloskar Engine Model RB33, installed at 217 Transit Camp under AGE(I) R & D Manali and all as specified and as directed by the Engineer-in-charge.

Cylinder liner

Cylinder head

Ring set

Piston assembly

Gaket set

Main Bearing set

Large end bearing set

Cylinder shaft assembly

O ring set

Fuel pipe set

Fan belt set

Air filter assembly

Lube oil filter

Diesel filter assembly

Battery 12 Volts 130 AH

Common spares for all types of DG Set

Coolant Make Kirloskar/servo/Castrol

Disttilled water for battery

Lubrication oil 15 W 40.

Taking down of unserviceable Radiator from 15 KVA to 30 KVA DG Set including connected hose pipe etc and cleaning thoroughly all the tubes and fins etc and carrying out copper brazzing to the leakage of the cooling tubes and refixing of the repaired Radiator to its existing position complete all as specified and as directed by the Engineer-in-charge.

DG SET OF CAPACITY 30 KVA MAKE: KIRLOSKAR Carry out 'B' check kit from authorised rep or service engineer from the manufacturer of DG set of 30 KVA capacity for comprehensive maintenace DC Electrical System, Control Panel and accessories and AC wiring and accessories, all as specified and as directed by Engr-In-Charge.

DG SET OF CAPACITY 15 KVA MAKE: KIRLOSKAR Carry out 'B' check kit from authorised rep or service engineer from the manufacturer of DG set of 15 KVA capacity for comprehensive maintenace DC Electrical System, Control Panel and accessories and AC wiring and accessories, all as specified and as directed by Engr-In-Charge.

Repair/Overhauling of Alternator by removing the Exciter Unit, re-winding the week coil with super enamelled copper wire with proper turn as per the manufacutures instructio to achieve adequate voltage and PF with rated R.P.M including supply and fixing of both end bearing as per the existing and necessary spaires ie capacitor/carbon brush ectc.and other materials, heating vernishing the coil, re-fixing the item in proper position and testing on Load for 30 KVA DG set all as specified and as directed by the Engineer-in-charge.

Repair/Overhauling of Alternator by removing the Exciter Unit, re-winding the week coil with super enamelled copper wire with proper turn as per the manufacutures instructio to achieve adequate voltage and PF with rated R.P.M including supply and fixing of both end bearing as per the existing and necessary spaires ie capacitor/carbon brush ectc.and other materials, heating vernishing the coil, re-fixing the item in proper position and testing on Load for 15 KVA DG set all as specified and as directed by the Engineer-in-charge.

Taking out of unservicable self starter 12 volt and connected unserviceable portion of electric wiring and carrying out repairs and overhauling of the self starter for 15 KVA to 30 KVA DG set, engine and replacement of armature, carbon brush, bearing, bendix penion,solenoid switch, bearing, tapping of field coil refixing of all component and fixed in existing postion including testing complete all as specified and as directed by the Engineer-in-charge.

M&L for dismantling of FIP, injector nozzles includings connected accessories from 15 KVA to 30 KVA Kirloskar DG sets and M/L for carrying out overhauling, calibration and refixing completeall as specified and as directed by the Engineer-in-charge.( Note-During repair/calibration if any Injector nozzle,plunzer ,Delivery valve is found unserviceable the same will be measured seperately , however all the rest items required for making the FIP serviceable shall deem to be included in the cost quoted for overhauling of FIP

Material and labour for cleaning of Crankcase Breather 15 KVATO 30 KVA Set all as specified and as directed by the Engineer-in-charge.

M&L for Greasing of all roller and ball bearings of 15 KVATO 30 KVA Set all as specified and as directed by the Engineer-in-charge.

Material and labour for cleaning of silencer pipe, replace of exhaust manifold and removing of ropes and re-fixing of new ropes of 15 KVA DG Sets complete all as specified and as directed by the Engineer-in-charge.

Kanishka Engineers