Construction and Renovation work of Malav Lake in Vasna Ward of West Zone of AMC.

(4) Date of e-Tender (Technical Bid)

Municipal Commissioner Ahmedabad Green Design & Engineering services Pvt.Ltd.

Municipal Corporation Sardar Patel Bhavan 520-521, Shivalik Square,

Ahmedabad – 380 001 Gujarat Nr. Adani CNG Pump,

(INDIA) Ramapir No Tekro, old Vadaj,

Fax : (091) – 79 – 25350926 Email- [email protected]

Website : www.egovamc.com

Construction and Renovation work of Malav Lake in Vasna Ward of West Zone of AMC.

PRICE QUOTATION SHEET

Earnest Money Paid Rs. : Rs. 5,18,140.00/-

Date of Opening of Tender :

Quoted Price in Rs. 5,18,13,713.00/-

I / We am / are willing to carry out work at % above / below* percent (should be written in figures and

words) of the estimated cost, as mentioned above. Amount of my / our tender works out for Rs. (in figures)

Rupees (in words)

Estimated amount put to tender Rs. Estimated amount put to tender Rs.

Add % above Rs. Deduct % below Rs.

Total Rs. Net Rs.

In words In words

Signature of Contractor Additional City Engineer (Drainage Project)

Ahmedabad Municipal Corporation

NAME OF WORK: -Construction and Renovation work of Malav Lake in Vasna Ward of West

SUMMARY OF COST

SR NAME OF WORK AMOUNT

2 ELECTRICAL WORK

Total Cost (Without GST)

NAME OF WORK: -Construction and Renovation work of Malav Lake in Vasna Ward of West Zone

N UNI Qty without

Demolition of Brick work and stone masonry

including stacking of serviceable materilas and

disposal of unserviceable materials with all lead

and lift. (ii) In Cement Mortar.

Demolition including stacking of serviceable

2 materilas and disposal of unserviceable materials Cmt 270.00 1,047.38

with all lead and lift. (i) R.C.C. work

Dismantling steel work including distempering

3 and stacking the materials with all lead and lift.

Grill for compound wall Kg 24,900.50 3.63

Excavation for foundation for loose and soft soil

including sorting out and stacking of useful

materials and disposing of the excavated stuff up

to 50 meter lead.

Filling available excavated earth (excluding

rock) in trenches. plinth, sides of foundations etc.

5 in layers not exceeding 20 cm. in depth Cmt 4,695.00 129.10

consolidating each disposited layer by ramming

Conveyance charge of earth, lime, murrum,

building rubbish, manual garbage, sludge,

6 excavated rock, fly ash, aggregate of any kind etc.

Providing and casting in situ C.C. in grade M-15

(approx. corresp. to prop. 1:2:4) (proportions as

per mix design or as per Table 9 of 18456 2000 in

masses by weigh batching ) using granite,

quartzite trap metal of size 6 mm to 20 mm for

PCC work, including scaffolding cente ring, form

work, needle vibrated consolidation, curing comp.

up to 6 meter depth or height (excluding cost of

reinforcement and neat finishing) with centering

and shuttering/deshuttering etc. comp. for

structure for other than water retaining .

Providing and laying controlled cement concrete

M20 for foundation and superstructure with

vibrating, curing etc. complete including the cost

of form work but excluding the cost of

reinforcement for RCC work stated below etc.

complete at any height, as directed.

a) RCC Footing for Compound Wall Cmt 220.00 5,520.00

b) RCC Colummn for Compound Wall Cmt 100.00 7,363.00

c) RCC BEAM Cmt 145.00 6,722.00

d)'R.C.C. slabs and platform Cmt 40.00 6,504.00

e)'Chajja Cmt 5.00 6,504.00

Providing and cast in situ C.C. in grade M-25

proportions of ingredients as per mix design by

weigh batching using granite, quartzite trap metal

of size 12 mm to 20 mm and or 6 mm to 12 mm

including scaffolding centering formwork, needle

vibrated consolidation, curing and hydraulic -

testing etc. complete (excluding cost of

reinforcement) with centering and

shuttering/deshuttering etc. compo up to 6 meter

height Idepth Av, G.L. for all water retaining

(a) Footing Cmt 61.56 8,077.00

(c) Column Cmt 16.98 9,195.00

(e) Staircase Cmt 1.02 8,266.00

Providing and cast in situ C.C. in grade M-30.

proportions of ingredients as per mix design by

weigh batching using granite, quartzite trap metal

of size 12 mm to 20 mm and or 6 mm to 12 mm

including scaffolding centering formwork, needle

vibrated consolidation, curing and hydraulic -

testing etc. complete (excluding cost of

10 reinforcement) with centering and

shuttering/deshuttering etc. compo up to 6 meter

height Idepth Av, G.L. for all water retaining

(a) Vertical Wall Cmt 75.00 8,747.00

(b) Column Cmt 12.00 9,317.00

(d) foundation Cmt 17.00 8,213.00

Providing TMT Bar Fe-500/500D reinforcement

bars for R. C. C. work including bending, binding

and placing in position complete upto floor two

Brick work using common burnt clay building

bricks having crushing strength not less than 35kg

/ Sq. C. M. in ramp, steps and Foundation & Plinth

12 in cement morter1:5 (1 cement : 5 coarse sand) Cmt 185.00 4,011.66

including racking out joints, curing, scaffolding

required if any etc. complete, as directed. (B)

Brick masonry in cement mortar (1:5) using

common burnt clay building bricks having

13 crushing strength not less than 35kg/csmt Cmt 330.00 4,091.84

including scaffolding,curing, etc. complete for

walls, parapets, etc. at all levels.

Brick work using common burnt clay building

bricks having crushing strength not less than

kg./Sq.Cm. in foundation and plinth in Cement

Mortar 1:5. (1- Cement : 5 -fine sand) Extra for

brick work in superstructure above plinth level

upto floor two level (B) Conventional at all level

Half brick masonry in common brunt clay

building bricks having crushing strength not less

than 35 Kg/Sq.Cm. in Lime mortar 1:1.5 ( 1- Lime

: 1.5 -coarse sand ) in foundation and plinth Extra

for half brick masonry in superstructure above

plinth level upto floor two level.(B) Conventional

Providing 15mm thick cement plaster in single

coat on Rough (Similar)side of single or half brick

walls for interior plastering upto floor two level

and finished even and smooth in (i) Cement

mortar 1:3 (1-cement:3-sand) including a floating

coat of neat cement slurry

20 mm thick sand faced cement plaster on walls

upto height 10 metres above ground level

consisting of 12mm thick backing coat of C.M.

1:3 (1-cement : 3-sand) and 8 mm thick finishing

coat of C.M. 1:1 (1-cement : 1 sand) etc.

complete. (including around Pump house)

Finishing wall with weather proof exterior

emulsion paint on wall surface (two coats) to give

18 an required shape even shade after thoroughly Smt 8,930.00 113.40

brushing the surface to removal dirt, and remains

of loose powdered materials.etc complete

Fabricating supply and erecating in postion

standard structural nsteel section conforming ti IS

2062 for Railing, skywalk, stair or other works

using ISMB,ISA,ISMC,MS plate, flat, squre

section, tube, etc. including welding,

cutting,wastagw, etc. complete. The rate is

inclusive of welding rod,supply & fixing of

19 correct size nut, bolts, washers, including one Kg 75,310.00 126.68

primer coat of red lead paint conforming IS:102

Zinc chromate paint conforming to IS:104

followed by two coat of aluminium paint as per

IS:2339 or enamel paint of colour as selected by

engineer incharge, with all contractors

materials,labour tools & plants, in bolted/welded

construction as directed by Engineer in charge.

the wast cut pieces shall not be included in nthe

paying quantity. The work shall be carried out as

per IS:800,IS:816 Fabrication shall be in a perfact

Architectrual workmanship manner and as

provided in section V& VI of IS 800 & IS

The rate shall include for applying two or more

coats of approved make and shade PU Paint over

two coat (min 60 DFT) of anti corrosive epoxy

base primer,as per manufacturers specification

Removing any kind of pavement incl stacking of

20 serviceble material disposal of unserviceble Sqm 4,425.00 14.00

material with 50 meter lead and lift.

Filling in foundation and plinth with murrum or

selected soil in layers of 20cm. thickness

including watering, ramming and consolidating

Pre cast concrete kerb Providing and fixing M25

Grade of concrete precast exposed / Fair finish /

texture finish kerb stones of approved make as per

approved sample of any size and any type. Kerbs

shall be fixed on the foundation prepared as per

approved design. The rate shall also include for

erecting and fixing the pieces in position for

complete kerb system with chamfered type of

kerbs including necessary accessories of kerb like

radius kerbs, angles and quadrant kerbs, droplet

kerbs etc. complete as per drawing. Kerb shall be

fixed as paper joint without any jointing material.

However cement mortar shall be provided at the

backside of kerb stone joint. (Sample must be

approved) Cost of excavation, cutting , base , side

filling shall includes as directed engineer -

incharge in above item description as per BOQ (b)

380 x 600 x 150 mm high Footpath kerb.

Paver Block Providing and laying shot blasted

Non - interlocking, Paver blocks of specified

thickness, size, grade of concrete and colour

machine made and blasting by automatic shot

blasting machine and high density of as per

approved sample of approved make for footpath,

parking areas, service lanes,cross over and other

23 areas as mentioned in the drawing. Including Sqm 2,250.00 669.65

providing and laying 50 mm thick averave

bedding layer of coarse sand below paver block as

per required grading and specification. Laid paver

block shall be mechanically compacted. The work

of the paving blocks shall be executed in line and

level by skilled mason of flooring work only.

Small size of paver block with same specification

shall be used at residue or at end. It should be laid

in such a way that the no cutting of the paver block

to be necessary. If cutting of paver block shall be

required , than cut by machine only and laying to

be done by skilled flooring mason. The finished

surface of the paver block shall have coarse sand

Texture Finish. Pave blocks shall be compacted

and shall be re-laid if necessary. Actual laid area

shall be measured and paid without any wastage.

(A) 60 mm thick M-35 grade Grey Paver block of

size 200mm x 200mm.

Excavating pits of proper size and providing well

grown seplings of big trees (Gulmohar,

peltoforum, kordia, kadam, Saptparni,

Tebubiarosea, Borsalli, Spethodia, Neem,

Parijatak, vad, pipal, Umro, Garmalo, Khati

Ambali, Jambu, Badam etc.as directed) having

Height of Minimum 8 fit to 9 fit bag size is 25 inch

x 25 inch and planting the same with varmi

campost at the rate of 0.06 cu.m.per pit (about

Filling in foundation and plinth with brick Bats

Chhara in layers of 20cm. thickness including

watering, remming and consolidating etc.

Providing 20 mm thick double coat mala cement

plaster on interior brick / concrete work for

plastering comprising of base coat of 12 mm thick

cement plaster in cement mortar (1 Cement :

coarse sand) in rough finishing and 8 mm thick

top coat of cement mortar 1:2 (1 Cement :

Coarse sand) finished with trovel including

scaffolding curing etc. complete.

Providing and laying one side polished granite

stone slab flooring over 18mm (Average) thick

base of cement mortar 1:6 (1-cement : 6-coarse

sand) laid over and jointed with grey cement

slurry mixed with pigment to match the shade of

slab directed by Engineer-in-charge

28 Labour Charges half round edge for Granite Rmt 540.00 85.00

Boring holes 3.5 m deep in ordinery soil )for cast

in situ piles) and getting out the soil and disposal

29 of the surpluse excavated soil as directed within a Each 140.00 1,509.00

lead of 50 meter for following diameter of pipes.

Providing and laying controlled cement concrete

M-30 for R.C.C. bored piles of 0.300 Mt.

diameter rincluding ramming, vibrating and

finishing complete

Extra for under reaming inside the bore Holes for

31 under reamed piles of following Diameter.(iii) Each 140.00 642.30

Dewatering by pumping set of required capacity

including temporary platform carting pumping at HP/H

site and fixing the same in position including all r

accessories, and fual and labour etc. complete.

Providing and laying Vitrified tiles 8 to 10mm

thick, 24''x24'' in flooring treads of steps and

33 landing laid on a bed of 12mm thick cement Sq.m 65.00 1,062.50

mortar 1:3 (1-cement:3-coarse sand) finishing

with flush pointing in white cement. (upto 10 ton)

Providing and laying broken Chine Mosaic

flooring for terrace using 12 mm to 20 mm broken

pieces of glazed tiles to be laid over Cement

mortar 1:3 to plain or slope and to be tempered to

34 bring mortar crème out upto surface using white Sq.m 110.00 739.89

cement including rounding of junctions and

extending them upto 15 cm. along the wall,

clearing with water and oxalic acid etc. as

Providing and laying white glazed tiles 6 mm

thick in flooring, treads of steps , skirting ,dado

35 and landing laid on a bed of 12 mm thick cement Smt 210.00 908.17

mortar 1:3 (1 cement : 3 coarse sand) finishing

with flush pointing in white cement (Upto 10 ton)

Providing and fixing iron doors including using

the frames of channels, angles and flats and MS

sheets as per drawing including revating or

welding and fixing in concrete block including

iron fixture and fastening with one coat of primer

and 3 coats of enamel paint etc. complete.

Providing and fixing standared extruded of

alluminimum section of size 63mm x 38.10mm x

1.2mm (Jindal Section : 2434, @ Wt.

Kg/mt.) with colour powder coated alluminium

frame for ventilation with 5 mm thick frosted

glass as details etc complete for Ventilation

Providing and fixing wsh down watercloset

(Europeantype,W.C.Pan) with integral Por S trap

including jointing the trap with soil pipei n

Cement Mortar1:1(1-Cement:1-fine sand) (Seal

and cover to beme asured and paid for separately)

(A)vitreous China Pattern :(i) in white colour

dia. C. P. brass half turn flush cock complete

including earthwork, bed concrete of 1:4:8.

Providing and fixing wsh down watercloset

39 (Indian Type,W.C.Pan) with integral Por S trap No. 8.00 1,510.98

including jointing the trap with soil pipei n

Cement Mortar1:1(1-Cement:1-fine sand) (Seal

and cover to beme asured and paid for separately)

(A)vitreous China Pattern :(i) in white colour

dia. C. P. brass half turn flush cock complete

including earthwork, bed concrete of 1:4:8.

Providing and fixing flat back white colour

vitreous china wash basin 550 mm x 400 mm size

with CI brackets painted white. Wash basin shall

have 15 mm dia GI supply pipe, overflow chase,

15 mm dia pillar cock and stop cock with PVC

bottle trap and PVC pipe piece upto wall plus

40 mm dia PVC waste pipe upto floor level No. 3.00 2,084.70

connected to 32 mm dia CI pipe below floor and

connected to nearby floor trap complete with

unions and plumber's white soldered joints with

necessary cleaning eye, complete. All chases cut

in wall for fixing pipes shall be made good in CM

Providing and fixing Flat Back Urinal (

Hindware- 44cmx31.5cmx26.5cm) or equivalent

approved and of approved shade including fixing

the same in concealed CI brackets, CP spreader,

CP dome shaped waste coupling, CP bottle trap

with flanges, CP angle cock flush pipe making

inlet and out let connections all complete as per

the instruction of Engineer - In - Charge

Providing, laying and jointing in true line and

level U.P.V.C. Pipe (SCH-40) for including

fittings make PRINCE / SUPREME / ASTRAL /

FINOLEX or equivalent as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the

help of clamp at every two metre C/C or shall be

42 concelled as directed including necessary fittings

etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of

Providing & fixing gun metal check or non return

full way wheel valve

Providing and fixing brass screw down stop tap.

Providing and fixing screw down bib taps of

45 following size.(C)Gun metal screw down bib tap. No. 15.00 157.29

Providing and fixing 150 mm x 100 mm

46 intercepting sewer trap embedded in concrete No. 15.00 976.00

complete including excavation and backfilling.

Constructing Manhole with R.C.C. top slab in

1:2:4 mix (1-cement: 2-coarses and :4- graded

stone aggregate 20 mm nominal size) foundation

concrete 1:3:6 mix (1-cement : 3-coarse sand : 6-

Brick bats 40+50 mm size) inside plastering

mm thick with Cement Mortar 1:5 (1-Cement : 5-

coarse sand)finished with a floating coat of neat

cement and making channels in cement concrete

1:2:4 mix (1-Cement: 2-Coarses and : 4-stone

aggregate 20 mm nominal size) finished smooth

complete including curing and festing (i) Inside

size 900mm x 1200 mm and 2.0 M. deep

including C.I. cover with frame size 560mm

diameter total weight of cover and frame to be not

less than 128kgs. (Wt. of cover 64Kg. and Wt. of

frame 64Kg.) (A) With 230 mm thick walls of

brick msonry using brick having crushing strength

not less than 35Kg./Sq.cm. in Cement Mortar 1:5

(1-Cement : 5-Coarse sand) (1) A type depth

Metre for 150 mm diameter sewer.

Providing and fixing cast iron (Spun) Nahni trap

of the following nominal diameter of self cleaning

design with C.I. screaed down or hinged grating

including cost of cutting and making good the

walls and floor 100mm inlet and 50mm outlet. (C)

Providing and fixing S.W. gully trap with C.I.

grating brick masonry chamber and water tight C.

49 I. cover with frame of 300 mm x 300 mm size No. 15.00 1,234.57

(inside) with standard weight. (i) Square mouth

traps.(B) 150mm x 100mm size P or R type

Providing and fixing100mm size P or Strap for

water closet squatting pan including jointing the

50 trap with the pan and soil pipe in cement No. 15.00 311.85

Mortar1:1 (1-Cement : 1-Fine sand) (A) Vitreous

Providing and laying (tolevelorslopes) and

jointing with stiff mixture of Cement Mortar in

51 proportion 1:1 Selt glazed stone ware pipes Rmt. 30.00 288.23

including testing of pipes and joints

complete.(B)150mm dia. (upto 10 ton)

Constructing brick masonry chamber for under

ground C.I. Inspection chamber and bends with

52 bricks having crushing strength not less than No 4.00 3,624.51

35Kg.Cm 2in C.M. 1:5 C.I. cover with frame

(Light duty) 455mm x 610mm internal

dimensions total weight of cover with frame to be

not less than 38Kg. (Wt. of cover 23Kg.) and Wt.

of frame 15Kg.) (R.C.C. top slab e with 1:2:4 mix

(1-cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete 1:5:10

inside plaster 15mm thick with cement mortar 1:3

finished smooth with a floating coat of neat

cement on walls and bed concrete etc. complete.

(ii) Inside dimensions 500mmx700mm and

450mm deep for pipe line with one or two inlets.

Providing and fixing over roof black colour PVC

overhead water tank of approved manufacture

with all necessary fittings and connection

etc,complete on terrace.

Providing and fixing 600mm x 450mm bevelled

edge mirror of superior glass mounted on 6mm

54 thick A.C sheet or plywood sheet and fixed to No. 6.00 231.36

wooden plugs with C.P brasss crews

(B)600mmx20mm size.

Filling in plinth with sand under floors

55 including watering ramming, consolidating and Cmt 30.00 455.63

dressing complete

Excavation for pipe line trenches etc. for all with

shoring and strutting if required as per required

gradient and line including safety provisions

using siterails and stacking excavated suff -

56 including upto all required lead cleaning the site

etc. complete for all lifts and strata as specified. In

all sort of soils and soft murrum

Manufacturing,Testing,Supplying,Loading,Trans

porting To Work Site, Unloading, Lowering In

Trenches, Laying And Jointing R.C.C.,Np-3

Class Pipes With socket and spigot joints as per -

IS 458-2003 Including EPDM Rubber ring as per

57 IS 5382-1985 etc.comp. As Directed by

engineering in charge.

300mm Dia NP-3 Rmt 400.00 874.00

Providing bedding including ramming, watering,

levelling, consolidating etc. completes as per

58 standard and Instruction of engineer in-charge. Cmt 100.00 329.00

As above with required quality sand brought from

outside including all lead

Constructing Bombay Pattern Type Catch Pit of

size 0.60 x 0.60 depth up to 1 mt including

excavation, B.B.C.C. (1:5:10), 23 cms thick brick

maso. wall in the prop. of CM (1:6) with 40 mm

thick IPS flooring in the prop M15 at bottom and

15 mm thick cement plaster inside the catch pit in

the proportion of CM (1:3) with out jali etc. comp.

CatchPit Jali Fixing P/F FRC catch pit jali with

60 frame 600mm x 600mm clear opening etc. comp.. Nos. 30.00 1,383.93

As directed by engineer in charge.

Constructing Slab type M.H. Chamber of the

following size including excavation, refilling,

brick bats cement concrete (1:5:10) of thickness

15 C.M., CC Channel (1:2:4) of thickness

C.M., finished 15 mm thick cement plaster inside

& outside (Only for shaft) in CM 1:3, finishing

with cement slurry, P/F 4 mm dia M.S.Steel

HDPE coated steps 35 cm c/c at 35 cm staggered

61 in masonary CM 1:5, RCC Slab in CC 1:1.5:3 of

thickness 23 C.M., including Cantering &

reinforcement (double jalli at 15 C.M. c/c

bothway 12 mm dia.) but excluding the cost of

Manhole seat cover etc..completed. of Size

X 1.40 meter (Inside Clear, M.H. length should be

parallel to the flow, for pipe dia <= 800 mm)

(Based on Drainage SOR 2009-10)

1.00 to 2.00 meter depth, (Slab at Ground level) Nos. 14.00 10,177.68

Providing & Fixing F.R.C. MH seat cover incl.

carting to the work site etc. comp. Directed.

(Based on rate of central store) FRC medium duty

62 Chamber seat cover (FRC) cover 706 x 556 x 50 Nos. 14.00 1,633.93

mm rectangular cover frame size 600 x 450 mm

clear opening outer size 816 x 666 x 100 mm

(MD-10) cover for dewatering Chamber

Shoring or timbering for trench with 50mm thick

planks & suitable size struts etc. complete.

Uncoursed Rubble Masonry with hard stone of

approved quality in foundations and plinth in

Cement Mortar 1:5 (1-cement : 5-coarse sand

including levelling up etc. complete

Coursed rubble masonry with stone of approved

quality in foundations and plinth in Cement

Mortar 1:5 (1-Cement : 5-coarse sand) etc.

Providing panel wall for dry stone pitching in

uncoursed rubble masonary with had stone of

approved quality in cement. mortar 1.5 including

curing etc, complete.

Filling in plinth with sand under floors

67 including watering ramming, consolidating and Cmt 5.00 455.63

dressing complete

Providing and filling rubbles including hand

68 packing and filling interstices with quarry spalls Cmt 5.00 1,054.26

behind abutments and between returns as directed.

Applying two coats of Birla(white cement based)

or Asian (acryliclapy putty) or equivalent & two

coats of primer of approved brand and

69 manufacture on new wall surface to give an even Smt 50.00 40.19

shade including thoroughly brushing the surface

free from mortar dropping and other foreign matte

rand sand papered smooth.

Providing and laying cement concrete flooring

1:2:4 (1-cement : 2-coarse sand : 4-graded stone

70 aggregate 20mm nominal size) laid in one layer Smt 10.00 297.68

and finished with a floating coat of neat cement.

(A) 40mm thick.

Providing and laying chequered terrazo tiles

22mm thick with marble chips of sizes upto 6mm

in floors on 25mm thick bed of Lime mortar 1:1.5

(1-Lime putty : 1.5 coarse sand) or C.M. 1:6 (1 -

71 cement :6 - coarse sand) jointed with neat cement Smt 5.00 856.80

slurry mixed with pigment to match the shade of

the tiles including rubbing and polishing

(A) Light shades using white cement

Providing and fixing 35 mm thick shutters for

Doors, windows and clerestory windows

including Indian teak wood frames 10 cm x 7 cm.

72 size including anodized alluminium fixtures and Smt 5.00 5,285.45

fastenings including primer coat of approved

quality and two coats of oil painting etc, complete.

(ii) Fully Panelled.

Providing and fixing window having extruded

aluminum Colour anodized section frame main

outer size 95mm x 24mm x 1.17mm @ wt.of

0.738 Kg/mt , horizontal Three track member size

vertical member of size 92mm x 31.75mm x

1.50mm @ Wt. 1.06 Kg/mt with sliding shutters

73 of horizontal member size 40 mmx18mm Smt 5.00 1,568.27

x1.29mm @ wt.of 0.456 Kg/mt, vertical member

of size 40mm x 18mm x 1.29 mm @ wt.of

0.456Kg/mt/ with 5 mm thick transparent bronze

colour tinted float glass with powder coated

aluminum fittings and fixtures and transparent

silicon sealant glass fixing to frame as per details

Providing and laying polished Kota stone slab

flooring over 20mm (Average) thick base of

cement mortar 1:6 (1-cement : 6-coarse sand) or

L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid

over and jointed with grey cement slurry mixed

with pigment to match the shade of slab including

rubbing and polishing etc. complete. (A) 25mm

Providing & laying granite slab 18mm thick in

flooring, treads of steps and landing laid on bed of

20mm thick cement mortar 1:6 (1 Cement :

75 coarse sand) or lime mortar 1:1.5 laid and finished Rmt 5.00 2,094.00

with flush pointing in white or colour cement

including rubbing and polishing complete.

for staircase steps

Providing cement vata (10cm. x 10 cm. size)

76 quarter round in cement mortar 1:1 including neat Rmt 15.00 23.45

cement finishing, watering etc. complete.

Distempering with dry distemper of approved

brand and manufacture (two coats) and of

required shade on wall surfaces of given an even

77 shade, over and including a priming coat of Smt 50.00 46.94

whiting after thoroughly brooming the surface

free from mortar dropping and other foreign

Survey by using own total station instrument for

the topographical and contour survey work in

5x5mt grid with 0.5mt contour interval, locating

all existing features including preparation and

78 submission of survey drawing in A0 size sheet in Ha 2.00 2,469.00

one soft copy etc complete. including vehicle

charges for mobilization & demobilization of

survey equipment, all hire charges for survey

instruments & hire charges for manual boat etc.

Providing, Fabricating & fixing name board of

Size 3.00mX0.60 made from ISA 50X50X5 mm

M.S angle with 3 Nos supports at back side

vertical member of angle size 1.1m ht incl 0.3 m

hold fast inserted in compound wall with

79 necessary dismantling and fixing with cement No. 1.00 15,640.00

concrete. The rate shall also incl 16 g M.S sheet

of size 3.00X0.60 mt incl ACP Sheet with

Printing letter with AMC logo as directed by EIC.

rate shall incl painting board with 2 coat of enamal

paint over one coat of anti-corrosive primer.

Providing, Fabricating & fixing caution board of

size 1.50m x 0.60m made from ISA 40 x 40 x

mm MS angle with 2 nos. supports at back side

vertical member of of angle size 1.10m height

(inclu. 0.30m hold fast inserted in compound wall

with necessary dis-mantling and fixing with

cement concrete. The rate shall also include 14g

MS sheet of size 1.50mt x 0.60mt incl ACP Sheet

with Printing letter with logo as directed by EIC.

rate shall incl painting board with 2 coat of enamal

paint over one coat of anti-corrosive primer.

Providing and fixing Radium sign board of size

3.00mt x 0.60 mt made from ACP sheet with

81 writing coloured reflected letter of lake name No. 1.00 7,400.00

board with necessary clamp for hanging board etc.

comp as directed by EIC

FRP Strip Cast Iron Banch -

Provding, Supplying and Fixing FRP Park

Benches including all complete, at specified Nos. 30.00 15,688.00

location as directed by Engineer-in-charge

Providing and fixing Decorative / solid waste

83 Garbage bin as directed by engineer in charge.

Providing Solid waste collection bin Nos. 15.00 19,380.00

Providing Decorative Garbage bin Nos. 10.00 6,460.00

Providing And fixing Floor Aluminium

Composite Panel signages of various size and in

any language. The 2 mm thick Aluminium SQ

Comosite panel shall be cladded with retro inch

reflactive high intencity grade radium sheets. The

signages shall be of any language

Providing and fixing in position 20.0 m high

aluminium water level indicator made of 230 mm

width and 4 mm thick aluminium sheet fixed on

angle 50 X 50 X 6 mm frame and bracing and

fixing in concrete base as per specification or

as directed by Engineer-in-Charge

Dismentaling tiled of stone (Kota / marble) floors

laid in mortar including stacking of serviceable

materilas and disposal of unserviceable materials

with all lead and lift.

Total Cost For Civil Work

ELECTRICAL WORK (MALAV LAKE)

No Description Qty. Unit Unit Rate

GRP Pole: Supply of approved make GRP Pole having following specifications: GRP Light Pole made

by CNC filament winding machine using thermoset resin polyester/epoxy resin system) having minimum

62% glass content. The pole should be in one piece and tapered round in shape, having smooth finish and

should be totally free from corrosion as well as non conductive & shock proof Pole should be provided

with FRP Anchor Base and it should be heavy duty, Pole should be flame retardant as per IS 6746. Resin

used shall be UV resistance and pigmented. A highly weather resistant polyurethane coating shall be

applied to the pole after applying suitable primer system that ensures proper adhesion of the paint.

Minimum coating thickness shall be 80 to 100 micron. Deflection of the pole shall not exceed more than

10% of the length of pole for the given load“ Pole should be generally made as per the dimensional data,

performance criteria and some interchangeability features of poles as per standard ANSI C 136.20 latest

version or ASTM D 4923/01. Including Min. 4C x 2.5 sqmm Alu. Armoured cable upto Juction Box,

with Including Required MCB,all required accessories and one or Two no. cable protection GI pipe of

40 mm dia and all required accessories. The size of pole and type of installation are as below.

3 mtr GRP pole : Overall length of 3 Mtr. Average Thickness: 7.5mm Top/ Bottom OD Dia A/F

89/130mm ± 2mm approx. (Without Base) Anchor Base (Size 250X250 & 12mm th.)

As per above specification Sr. No.

2 5 mtr GRP pole : Overall length of 5 Mtr. Average Thickness: 7.5mm Top/ Bottom OD Dia A/F 45 Nos. 11,603.00

89/158mm ± 2mm approx. (Without Base) Anchor Base (Size 250X250 & 16mm th.)

Providing Aluminium arm bracket of having 2 sets of suitable SS304 hardware for fixing the brackets

3 & spread of 1.2 Mtr (Suitable for 89 to 114 mm pole top dia) 35 Nos. 2212.00

(A) Single arm bracket

4 (B) Double arm bracket 10 Nos. 3416.00

5 (C) Triple arm bracket 5 Nos. 4403.00

Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom including excavation for the

pole of size 45 x 45 x 100 cm. Deep in below ground level with plinth of 45 cm x 45 cm (or 45 cm dia x

45 cm) high upper ground level with necessary curing and finishing in approved manner.

( for 3 & 5 mtr pole)

Supplying and erecting LED street light Fitting with High power White LEDs wattage of 1Watt and

7 above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die 70 Nos. 3,312.00

cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser

and Polycarbonate optics/ lenses with company mark/name engraved or embossed 120 to 300 V,Power

Factor more than 0.95, THD < 85 %, CCT 3000 K to 4000K, Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver efficiency > 85 %.CREE / OSRAM / PHILIPS Lumileds /

NICHIA / SEOUL/ BridgeLux (U.S.A.) make LED used for luminaire. ( fittings required LM-79 & LM-

80 certificates)(A) Street Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC

line supply with over-voltage protection. (1) 45W(For 5 Meter Pole.)

As Per Above Item Specification

Supplying of (AMC Store) for LED street light fittings.

8 (A) Street Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line supply 4 Nos. 3,184.00

with over-voltage protection.

Supplying and erecting Post Top Lantern LED fitting comprises of finish cast aluminum spigot and spun

aluminum canopy fixed with opal polycarbonate, pipe arrangement for vertical mounting driver and

accessories wired upto terminal block.IP 65 with 3 core x 1.0 Sq. mm Copper flexible Cable of required

9 length from Junction Box to fixtures, & with needed all electrical mechanical accessories to Commission 25 Nos. 4,772.00

the Streetlight poles as per tender terms, conditions & Specifications & Scope of Work.

(For 3 Meter Pole.)

Supplying of (AMC Store) for Post Top Lantern LED fitting comprises of finish cast aluminum spigot

and spun aluminum canopy fixed with opal polycarbonate, pipe arrangement for vertical mounting driver

and accessories wired upto terminal block.IP 65 with 3 core x 1.0 Sq. mm Copper flexible Cable of

required length from Junction Box to fixtures, & with needed all electrical mechanical accessories to

Commission the Streetlight poles as per tender terms, conditions & Specifications & Scope of Work.

LED Bollard fittings of minimum height 600 mm & dia.100mm having polycarbonate clear/milky

diffuser mounted on 3mm thick aluminium finished powder coated pipe with base plate 160x160mm

with erection by M8x75mm fastner with required RCC foundation. IP 65 for 9 to 20watt, surge-4kv, cat-

Supplying and erecting Flood light fittings with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser

12 and Polycarbonate optics/ lenses, with toughened glass with company mark/name engraved or embossed 15 Nos. 8,370.00

160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings required LM-79 & LM-

80 certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity between the ranges shown.)(B) 150 w Flood Light

(IP-65), Surge protection -4KV integral and ,Light must have 440VAC line supply with over-voltage

SITC of 'B' class galvanised iron pipe 32 mm outside dia 45 cmslong duly welded on 20 cms x 20 cms x

13 3 mm thick M.S. base plate, erected on wall or corner for mounting luminaire with necessary hardware 15 Nos 340.00

materials duly painted for wall mounting indoor flood light fixtures on Wall of Buildings.

LOW VOLTAGE (LT) CABLES

Supply and unloading & delivery at site, storage & security at site of 1.1 kV, XLPE insulated (IS 7098)

/ PVC insulated (IS 1554) AL/Cu conductor cables as per specification & IS. The cable when laid outside

the building shall be laid underground in excavated trench, as per specified method and shall be laid in

prepared trench on cable tray when laid inside the building.

1) 3.5C x 50 sq. mm. Cable Alu Conductor

15 2) 4C x 10 sq. mm. Cable Alu Conductor 2000 Mtr 137.00

16 3) 4C x 16 sq. mm. Cable Alu Conductor 500 Mtr 150.00

17 4) 3C x 2.5 sq. mm. Cable Cu Conductor 500 Mtr 86.00

Supply and Installation of 3C X 1.0 sq.mm Cu. Flex. Cable pole wire in for juction box of Pole to light

fixure and bollard connection from JB to DWC Pipe.

CABLE END TERMINATION AND CONNECTION:

SITC of Double compression Weather proof type Ni-Plated brass cable glands and crimping type

Bimetalic lugs / sockets with necessary tools and equipments as specified in specifications and IS.

The glands and lugs / sockets shall be suitable for cable size and type mentioned below & as per

specificaitons.

1) Earthing the glands and armouring with earthing clamp and jumper and also connecting to common

2) The job also includes, if necessary, supply & fixing of extension busbar of same material on MCCB

or panel board terminal / connector to connect more than one no. of parallel cables or to connect higher

size cable to lower size unit. The job also includes earthing the glands and armour of the cable with

common earth bar or flexible copper mesh.(Cable termination qty. shall be as per site requirement)

1) 3.5C x 50 sq. mm. Alu Conductor

20 2) 4C x 10 sq. mm. Alu Conductor 150 Nos. 148.00

21 3) 4C x 16 sq. mm. Alu Conductor 60 Nos. 135.00

22 4) 3C x 2.5 sq. mm. Cu Conductor 60 Nos. 88.00

23 Supply and Termination of 3C X 1.0 sq.mm Cu. Flex. Cable pole wire with necessary lugs or connectors. 160 Nos. 51.00

Supply, laying and erection of 50 mm approved make Double Walled Corrugated pipes (DWC) of

polyethelene (confirming to IS 14930 II) with necessary connecting accessoies of same material at

required depth for laying of cable below ground / road surface for enclosing cable and back filling the

same to make ground as per original. (For Street light cables).

DWC Length is Approx. Provide as per Actual Site Requirements.

Supply, laying and erection of 90 mm approved make Double Walled Corrugated pipes (DWC) of

polyethelene (confirming to IS 14930 II) with necessary connecting accessoies of same material at

25 required depth for laying of cable below ground / road surface for enclosing cable and back filling the 200 Mtr 95.00

same to make ground as per original. (For Street light cables).

DWC Length is Approx. Provide as per Actual Site Requirements.

Making trench in soft soil of suitable width of 90 cms deep for laying cable or locating the fault all over

26 the run and backfilling the same and making the surface as normal ground. 800 Rmt. 55.00

Making trench in soft soil Length is Approx. Provide as per Actual Site Requirements.

Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or required depth for laying any

size of cable or locating the fault all over the run and back filling the same and making the surface as

27 normal ground. 600 Rmt. 74.00

Making trench in Hard Murrum / Tar Road Length is Approx. Provide as per Actual Site

28 (B) If additional machinery like hammer driller or JCB use [Add] 200 Rmt. 354.00

Covering of cable with second class bricks or cement tiles laid cover the cable crosswise & also on both

sides with covering of 7. 5 Cms. layer of sand above & below cable (16 bricks per meter)

CHEMICAL EARTHING

SITC of chemical earthing with earthpit of minimum bore size dia. 225 mm Safe Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS-3043:1987 made of corrosion free G.I. Pipes having Outer

pipe dia of 80 mm having 80-200 Micron galvanising, Inner pipe dia of 40 mm having 200-250 Micron

30 galvanising or copper coated solid steel road / flat strip type connection terminal 14mm dia with constant 4 Nos 5,785.00

ohmic value surrounded by highly conductive corrosion resistant chemical compound with high charge

dissipation suitable for [A] For electrical installation up to 440 V Length of Pipe - 1 Mtr Back filling

compound - 1 Nos. of Bag of 15 Kgs.

(2 nos. Each for body of Section Pillar other Electrical Equipments )

CHEMICAL EARTHING

31 [A] For electrical installation up to 440 V Length of Pipe - 1 Mtr Back filling compound - 1 Nos. of Bag 25 Nos 5,785.00

SITC of 50mm(w) x 6mm(T) etc. sizes as required, HOT deep GI Strip including supply & fixing

using GI spacers, saddles when laid inside the building and inclusive of excavation & refilling of earth

when laid outside the building & interconnection with earth pit & all electro-mechanical

equipments.(Section Pillar other Electrical Equipments )

33 Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG. 150 Kg 77.00

Providing and erecting Pipe type earthing having 150 cms.long and 2.5 cms. dia. galvanised iron pipe

34 with coupling and buch buried in specially prepared earth pit complete with necessary 8 SWG earth wire. 83 Each 365.00

(Provide Earthing Pipe for Each Pole.)

FEEDER SECTION PILLAR TYPE A

Supplying, unloading at site, shifting to site, assembling, leveling, grouting, erecting, Testing, &

Commissioning double compartmentalized Street light control panel with IP 65 protection & Enclosure

should be powder coated fabricated from 10 Gauge M.S. sheet & folded channel totally enclosed cubical

type. with pad lock arrangement. The successful tenderer will have to prepare general arrangement with

dimensions & get it approve through Architect/ Consultant. All civil work including RCC platform for

street light panel should be in scope of Electrical contractor complete in all respect as per detail drawing

and directed by engineer in charge. with the 600 mm height MS angle covered stand. The switchboard

(panel) shall have provision for future expansion & shall be modular in construction. The bus bars shall

be connected with C type clamps without any drilling on the bus bars.

SITC of the IP 65 Smart Section feeder panel with space for Smart Energy monitoring system and

35 number of 3 phase Energy meter of Supply Company for the Street Lighting Consisting of following 1 No. 100000

Incoming: 100 Amp FP MCCB with the spreader link with in built earth fault relay R-Y-B-On-Off

indicating Lamp with control fuse.

Busbar: Set of 100 A. FP tinned copper busbars of EC. grade & adequate capacity, size & insulated with

colour tape & should be tined at all joints.

Auto/Manual bypass switch with indicating lamp Meter: VAF meter equivalent to Enercon make ELF

3259 with 100/ 5 A Class 1 ct. Outgoing: MCB's Should be of 10 KA

Timer Equivalent to Theben make Astronomical type with the battery back up: 2 nos. 40 amp. FP Power

Contactor: 2 nos.

1- 32 amp. DP Power Contactor: 8 nos. 40 Amp. FP MCB: 4 nos.

2- 2- 32 Amp. FP MCB: 2 nos.

3- 3- 32 amp. SP MCB: 40 nos.

FEEDER SECTION PILLAR TYPE B

Supplying, unloading at site, shifting to site, assembling, leveling, grouting, erecting, Testing, &

Commissioning double compartmentalized Street light control panel with IP 65 protection & Enclosure

should be powder coated fabricated from 10 Gauge M.S. sheet & folded channel totally enclosed cubical

36 type. with pad lock arrangement. The successful tenderer will have to prepare general arrangement with 1 NO 85,000.00

dimensions & get it approve through Architect/Consultant. All civil work including RCC platform for

street light panel should be in scope of Electrical contractor complete in all respect as per detail drawing

and directed by engineer in charge. with the 600 mm height MS angle covered stand.The switchboard

(panel) shall have provision for future expansion & shall be modular in construction. The bus bars shall

be connected with C type clamps without any drilling on the bus bars.SITC of the IP 65 Smart Section

feeder panel with space for Smart Energy monitoring system and 2 number of 3 phase Energy meter of

Supply Company for the Street Lighting Consisting of following Incoming: 63 Amp FP MCB with the

spreader link with in built earth fault relay R-Y-B-On-Off indicating Lamp with control fuse.Busbar: Set

of 63 A. FP tinned copper busbars of EC. grade & adequate capacity, size & insulated with colour tape

& should be tined at all joints.Auto/Manual bypass switch with indicating lampMeter: VAF meter

equivalent to Enercon make ELF 3259 with 63/ 5 A Class 1 ct.Outgoing: MCB's Should be of

KATimer Equivalent to Theben make Astronomical type with the battery back up: 2 nos.40 amp. FP

Power Contactor: 2 nos.6- 32 amp. DP Power Contactor: 8 nos.40 Amp. FP MCB: 2 nos.6- 32 Amp. FP

MCB: 2 nos.6- 32 amp. SP MCB: 40 nos.5 KVAR Capacitor with the 40 amp TP capacitor duty contactor

with the 10 minute time delay relay.

INTERNAL WIRING

SITC of Mains & outlet points wiring with 1.1 kV grade FRLS PVC insulated ISI marked flexible

stranded copper conductor wires with medium class min. 25mm. dia. Rigid PVC pipe and

accessories to be erected concealed in / to be run on surface / wall / ceiling with following sizes as

mentioned below. The unit rate wirings shall be with connector, PVC junction box, wires, holder, ceiling

rose, angle holder, switch, sockets, switch board, brass chromium / cadmium plated machine screws,

phase and neutral wires, green Earth continuity wires etc. as required to complete wiring from LDB panel

to the final outlet termination points. The wiring shall be as per IS:732, IS:4648 and as per tender

specification / IS.

(a) SITC of Mains wiring with 3 wire 1.5 sq.mm .

38 (b) SITC of Mains wiring with 3 wire 2.5 sq.mm as per tender specification & IS. 350 Mtr 134.00

39 (c) SITC of Mains wiring with 4 wire 1.5 sq.mm as per tender specification & IS. 350 Mtr 123.00

40 (d) SITC of Mains wiring with 4 wire 2.5 sq.mm as per tender specification & IS. 350 Mtr 158.00

SITC of Point wiring for Light / Bell/ Primary Point with 2nos. 1.5 sq.mm & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires,

length , pipe to be erected with 6A Modular type switch / bell push & accessories and earth continuity

41 of following type, erected on PVC / Metallic/Wooden box, single mounting base frame covered with 30 Point 445.00

textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose / H.D.Connector as directed with medium class Rigid PVC pipe &

Point wiring for secondary light point with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (green) both are of

ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be

erected concealed in / flushed on wall/ceiling, complete with earth continuity and necessary connection

with primary light with accessories erected on Metal / PVC box covered with 3 mm thick

PC(Polycarbonet) / Acrylic sheet for open / concealed wiring. with necessary Lamp holder / ceiling rose

/ H.D.Connector as directed.Note:- Maximum up to 6 mtrs length, excess will be considered as Mains

for Secondary Point

(a) with medium class Rigid PVC pipe and accessories

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (green)

both are of .ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type

of pipe to be erected concealed in / flushed on wall/ceiling ,complete with 6A Modular type switches and

43 following type of accessories erected on PVC / Metallic box, single mounting base frame covered with 30 Point 562.00

textured / metallic front plate modules erected on / in wall / ceiling as per pipe erected. with necessary

batten/angle holder or ceiling rose or H.D.Connector as directed. (a) with medium class Rigid PVC pipe

and accessories.

Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both are of .ISI marked

KV Grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected

concealed in / flushed on wall/ceiling complete with 6A Modular type switch and hum free EME four or

more step type electronic fan regulator with separately mounted and accessories with earth continuity of

following type erected on PVC / Metallic box, single mounting base frame covered with textured/metallic

front plate modules erected on / in wall / ceiling and fan box with hook in slab as per pipe erected. with

necessary ceiling rose / H.D.Connector as directed. (a) with medium class Rigid PVC pipe and accessorie

SITC of 6A independent Plug with 2 nos. 1.5 sq.mm Cu. Mains size wiring & earthwire of 1.5 sq.mm

(green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated multi strand copper wiress with

medium class rigid pvc pipe erected with ISI marked 3 / 5 Pin socket and 6A Modular type switch and

accessories with earth continuity of following type erected on PVC / Metallic/Wooden box, single

mounting base frame covered with textured/metallic/white front plate modules erected on / in wall /

ceiling as per pipe erected. with necessary ceiling rose / H.D.Connector as directed.

SITC of One 300/380 mm dia. Ex fan 16A independent Plug point near Ex. Fan with 2nos. 4 sq.mm

Cu. Mains size wiring & earthwire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multistrand copper wires with medium class Rigid PVC pipe and accessories to be

erected complete with Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden box

covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with

following type of accessories. Plug point shall be near Ex.Fan.

SITC of 5/15A independent Plug with 2nos. 4 sq.mm Cu. Mains size wiring & earthwire of 1.5 sq.mm

47 (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires with 10 Nos 829.00

medium class Rigid PVC pipe and accessories to be erected on wall / ceiling, complete withModular type

switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front plate modules

erected on / in wall / ceiling as per pipe erected with following type of accessories.

1200 mm sweep ceiling fan, capacitor type, having double ball bearing 450mm down rod, canopies,

48 shackle, rubber bush, blades, electronic speed regulator, suitable to operate on 230V,50Hz AC supply 6 Set 1,581.00

conforming to IS: 374/1979.Fan shall be painted with white colour.

380 mm sweep 1400 R.P.M exhaust fan, capacitor type, having double ball bearing, M.S.blades,

mounting frame, forearms, suitable to operate on 230V,50 HZ AC supply conforming to IS: 2312.Fan

shall be painted with epoxy grey colour controlled by one 6 A flush type switch on board and 6A plug

point near Ex. fan.

Providing, erecting, fabricating the M.S. structure as per requirement on site incorporating proper size of

M.S. angles, square, round, flats, bars, channels, sections complete with cutting, welding, grinding &

finishing duly painted vith one coat of red oxide with erection on site as per direction of engineer in

charge with necessary grouting, cementing, plastering & finishing complete.

Supplying & erecting approved make self-priming domestic monoblock water pump with 1 H.P

motor,and starter Panel suitable for operation on 230 volts, 50c/s. AC supply with metallic flange, and

M.S. impeller delivery and following discharge. 100 LPM at 14 mtrs. head suitable for 25 mm dia.

Supplying & erecting approved make SMC press moulded composite FRP. loop-in, loop-out approx.

2mm thick box complete with Bakelite connector strip 5way(3P+N+E),DIN rail for mounting mob &

52 hinged doors as per requirement having locking arrangements with mounting clamp with nuts, bolts & 25 Nos. 890.00

washers suitable for erection on pole with cable clamps& earth bolt of following size of box.

(f) 300mm x 200mm x 100mm [deep]

SITC of cable clamp of 25 mm X 3 mm M.S. flat suitable for fixing 2nos.of armoured st. light cable with

nuts and bolts for 140 mm diameter pole.

54 SITC of fluorescent tube Light 60 cms. 18/20 watt -Cat.III 25 Nos. 51.00

Providing & erecting approved make street light / wall mounting junction box compression moulded

from SMC (thermoset plastic) vertical sliding cover having locking with square head stud loop in / loop

55 out in built terminal suitable for four core cable, waterproof of I.P. 54 protected with clamp or bolt nut 10 Nos 1022.00

& earth bolt of following size.

(C) 327mm x 254mm x 120 mm (For wall Mounted Flood Light Fitting)

Supplying & erecting approved make RCCB (Electro magnetic type only) working on residual current

device having 10 KA short circuit breaking capacity and 30 mAmp. Sensitivity & 30 mili sec. tripping

56 time conforming to IS 12640 test knob facility trip free mechanism operating for rated leakage at nominal 2 Nos. 1,798.00

ten volt, complete erected including all materials lugs screws etc. completed

16 Amp. RCCB/ELCB 2 pole single phase

providing and erecting Approved make Three Phase & Neutral LT Heavy Duty Switch Disconnector

Fuse Unit Cubical type for panel mounting complete with operating mechanism suitable to operate on

57 415V A.C. , 23A duty With HRC fuses of suitable load confirming to IS. 13947 (Part I & III). of 2 No. 2,671.00

following capacities. (For LDB & PDB Power supply connection)

SITC of Power Distribution Board (PDB) as under:

3 Phase 4 Wire TPN, 8 way Pre-wired-MOG / MOV PDB for Auxiliary accessories Load power supply

58 (For MOV Pump delivery valves, valve at Header & for auxiliary load & spare): 2 Nos. 10,009.00

Incoming: 63A 4P, MCB 'C' Curve

Outgoing: 10 Nos. 32A 4P MCB 'C' Curve

Supplying & erecting approved make time switch with single pole air break contacts suitable for

V.15/16A.complete with self starting motor driven clock ‘ON’ &’ OFF’ automatic arrangement at any

predetermined time during each 24 hours,With nickel cadmium rechargeable battery backup erected as

Supplying & erecting power contactor for time switch complete erected as per direction Cat III [D]

pole 440V 40 Amp.

SITC of Lighting Distribution Board (LDB) as under:

3 Phase 4 Wire TPN, 6 way Prewired LDB (One each for Indoor & Outdoor Lighting) Suitable to house

:Incoming: 32A FP, ELMCB (30mA) Outgoing: 20A SP MCB 'C' curve (9 nos.) & 20A SP MCB 'C'

62 Supply and installtion of 6A SP MCB 150 Nos. 111.00

Supplying & erecting approved make RCCB (Electro magnetic type only) working on residual current

device having 10 KA short circuit breaking capacity and 30 mAmp. Sensitivity & 30 mili sec. tripping

63 time conforming to IS 12640 test knob facility trip free mechanism operating for rated leakage at nominal 4 Nos. 1,798.00

ten volt, complete erected including all materials lugs screws etc. completed16 Amp. RCCB/ELCB

pole single phase

LIASIONING WORK :

Charges for doing liasioning work for obtaining the necessary clearances rom the Electrical inspector /

competent Authorities for the total Electrical installation, co-ordinating with various agencies. All

necessary drawings, calculations, test certificates, etc. as required by these authorities shall be prepared

and furnished by the EPC Vendor. Any modification/rectification as required by these authorities shall

be carried out by theEPC Vendor at free of cost. The fees required to be paid to these authorities for

shall be borne by Owner on production of documentary evidences

Total Amount of Electrical work (W/O GST)

Total Amount of Electrical work (W/O GST)