AMRUT-Thrissur corporation KKY Zonal Dn43-AMRUT 2.0.RENOVATION WOK OF MAMBHAZHAKKAD KULAM

Amount

DAR CIVIL

OD38126/2024-2025:Removing chandy ,kulavazha and all other vegetation including cost and conveyance etc.complete with mechanical means.

OD540156/2024-2025:60.2.2. Bailing out water Using 5HP Pump- Bailing out water with 5HP engine and pump set including conveyance to site and erection, cost of fuel, lubrication oil and other stores, pay of staff etc complete

OD38080/2024-2025:Earth work excavation in or under water by mechanical means[Hydraulic excavator]/manual means over areas including disposal of excavated earth lead up to 50m.and lift up to 1.5m. disposed earth to be levelled and neatly dressed.All kinds of soil.

2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

4.1.5:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

5.2.2:Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

5.3:Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15<sup>0</sup> landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).

5.9.6:Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts

5.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers

5.22A.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more

10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

OD38228/2024-2025: Providing&fixing precoated galvanized iron profile sheets[size,shape and pitch of corrugation as approved by Engineer in charge]0.35mm[+0.05%]total coated thickness with zinc coating 120gms per sqm as per IS;277,IN 240mpa steel grade ,5-7microns epoxy primer on both side.of the sheet and polystertop coat 15-18microns.Sheet should have protective guard filmof 25 microns minimum to avoid scratches during transportatioon & should be supplied in single length up to 12m or as desired by Engineer -in-charge.The sheet shall be fixed using self drilling /self tapping screws of size[5.5x55mm] WITH epdm sealcomplete upto any pitch in horizontal/verticalor curved surfaces,excluding the cost of purlins ,rafters and trusses &including cutting to size and shape whereever required.

51.2.3:Filling with Quarry Muck Filling up low lying and water logged areas with local material/ quarry muck, spreading in layers, leveling the top at site and consolidation by ramming, etc complete for improving the CBR value of subgrade

OD540442/2024-2025:Ridge caping with prepainted galvanized steel sheet 0.35mm thick 60cm wide including all cost and materials ,conveyance ,labour charges etc complete.

OD540447/2024-2025:Supplying and fixing 150mm dia PVC rain water gutter semi circular section including fitting with 32mm*5mm flat supporters at 1m interval etc.complete

OD39385/2024-2025:Providing and laying 60mm thick factory made cement concrete inter locking paver block of M30 grade made by block making machine with strong vibratory compaction of approved sizedesign and shape laid in required colour and pattern over and including 50mm thick compacted bed of coarse aggregate filling the joints with fine sand etc.all complete as per the direction of engineer-in-charge.

50.6.2.1:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

14.53.1:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work

14.54.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to an give even shade:One or more coats on old work

21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)

OD539380/2024-2025:Supplying and fixing at site Aluminium Composite Panels of Alucobound Durabuild or equivalent make and approved colour certified for exterior applicatons including 15 years guarantee for colour fastness of clear thickness of 4mm with 28 to 30 micrones of PVDF coating confirming to ASTM standard on the top aluminium skin of 0.2mm and with abottom aluminium skin of 0.25mm with service &amp 1t;br&amp ;gt coating of polyester paint,laminated on to a center core of 3.5mm of single recycled low density polythelene material service &amp 1t;br&amp ;gt

30.2.57.1:Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unsaverieable material?s as per direction of officer in charge (excluding cast of plant & water )Cost of plantation per trees plants (for 100 nos.=427.45/100)

10.26.3:Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approves steel primer.G.I. pipes

OD534173/2024-2025:Providing and fixing name board with Granite of any colour 18mm thick including engraving letters etc.complete.

OD540270/2024-2025:Supplying and fixing stainless steel letters of 15 - 30 cm size (Malayalam/ English)

OD540446/2024-2025:PROVIDING AND PLANTING EUGENIA PLANT WELL DEVELOPED OF HEIGHT 60-90 CM INCLUDES ALL WORKS DIGGING,PLANTING ETC COMPLETE AS

10.28:Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

JOSHY K.P (BID ID -2191966)

Bidder Name

JOSHY K.P

t.l.anto