REPAIR TO DAY TO DAY ESSENTIAL B/R COMPLAINTS AT VARIOUS LOCATIONS AT PANGODE MILITARY STATION TRIVANDRUM

Amount

Repairs to leakage in bib taps, pillar taps, stop cocks, single valve of any description by changing the washer, etc complete all as specified and directed. Note: Works under this BOQ shall be executed for buildings of height up to four storeys. Hence, contractor shall make all necessary proper scaffolding arrangements and safety measures for labours at site.

Removal of air lock/ blockage of water in GI/ PVC tubing 15 mm/ 20 mm/ 25 mm bore, cleaning the pipe or fittings etc and refixing the same in position complete all as specified and directed.

S&F in repairs bib tap cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for 15mm bore dia iron pipe/ PVC pipe or for brass ferrule complete all as specified and directed.

S&F in repairs bib tap cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, screwed down, screwed for 15mm bore dia iron pipe/ PVC pipe or for brass ferrule complete all as specified and directed.

S&F in repairs 15 mm bore dia Bib tap standard of PTMT (Minimum weight 90gms), any colour, high pressure screwed for iron/ PVC pipe complete all as specified and directed.

S&F in repairs pillar taps, brass, fancy type, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for 15mm bore dia iron pipe complete all as specified and directed.

S&F in repairs 15 mm bore dia Pillar taps of PTMT (Minimum weight 110gms), any colour, high pressure screwed for iron/ PVC pipe complete all as specified and directed.

S&F in repairs angle cock, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 15mm bore dia PVC/ iron pipe or for unions complete all as specified and directed.

S&F in repairs angle cock/ stop valve cast copper alloy, chromium plated, fancy type screwed down, high pressure, with long shank and cup (concealed), with crutch or butterfly handle, screwed both ends for unions and fixed for 15mm bore dia of pipe complete all as specified and directed.

S&F in repairs 32mm dia PVC waste pipe 80 cm long with union for WHB complete all as specified and directed.

S&F in repairs 40mm dia PVC waste pipe 60 cm long with union for sink complete all as specified and directed.

S&F in repairs waste fittings, brass, chromium plated 32 mm dia for wash hand basin, glazed ware sinks etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end complete all as specified and directed.

S&F in repairs waste fittings, brass, chromium plated 40 mm dia for stainless steel sink etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end complete all as specified and directed.

S&F in repairs bottle trap of PTMT (32 mm bore dia of discharge pipe) having minimum water seal of 25mm (Minimum weight 260gms) complete all as specified and directed.

S&F in repairs bottle trap of PTMT (40 mm bore dia of discharge pipe) having minimum water seal of 25mm (Minimum weight 270gms) complete all as specified and directed.

S&F suitable sizes of spindle/ internal fittings suitable for all types of existing taps and valves (Bib taps/ Angle valves/ stop valves) complete all as specified and directed.

S&F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F in repairs Vitreous China wash basin, angle back, size 600x480mm white, including brackets, cutting for and pinning in ends of brackets or erecting stand but excluding taps, waste, chain and plug and porcelain stopper complete all as specified and directed.

S&F in repairs Vitreous China wash basin, angle back, size 550x400mm white, including brackets, cutting for and pinning in ends of brackets or erecting stand but excluding taps, waste, chain and plug and porcelain stopper complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white, including fixing bolt, plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device (excluding flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage etc complete all as specified and directed.

S&F in repairs vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor with provision of lime concrete bedding complete all as specified and directed.

Repairs/ adjustment to washer/ siphon float/ valve etc for high level or low level flushing cistern and making functional complete all as specified and directed.

S&F in repairs PVC siphon with handle, with internal fittings complete for low level flushing cistern complete all as specified and directed.

S&F in repairs 10 ltrs capacity PVC valveless, siphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and connection to flush pipe complete all as specified and directed.

S&F in repairs plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F 15mm bore dia UPVC pipes as per ASTM-1784 Sch 80 class III and all fittings fixed complete to walls, ceiling or in floors etc, including taking up or down old unserviceable steel tubing/ PVC pipes and connections including using of necessary scaffolding complete all as specified and directed.

All as per Sl No. 26.00 here-in-before, but 20mm bore complete all as specified and directed.

All as per Sl No. 26.00 here-in-before, but 25mm bore complete all as specified and directed.

S&F in repairs cast copper alloy, chromium plated grating doom 125 mm dia with waste hole and making good to floor complete all as specified and directed.

S&F in repairs cast copper alloy, chromium plated grating doom 100 mm square shape, fancy type, with waste hole and making good to floor complete all as specified and directed.

S&F in repairs PVC connections 15mm size, 450mm length with 02 Nos brass check nuts with washer etc complete all as specified and directed.

S&F in repairs PVC connections 15mm size, 600mm length with 02 Nos brass check nuts with washer etc complete all as specified and directed.

S&F chromium plated connection pipe 450 mm long braided hose with two 15 mm nuts and rubber washers (suitable for geysers, basin mixers) complete all as specified and directed.

S&F 50mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints and all fittings laid in trenches or in floors or fixed to walls including taking up or down existing cast iron pipes/ PVC pipes including all fittings by burning out lead joints etc to facilitate dismantling old serviceable fittings/ pipes laid in trenches, floors or fixed to walls all as directed including earth work, demolition of PCC/ Brick work and making good to match with existing surfaces including necessary scaffolding complete all as specified and directed.

All as per Sl No. 35.00 here-in-before, but 75mm bore complete all as specified and directed.

All as per Sl No. 35.00 here-in-before, but 110mm bore complete all as specified and directed.

All as per Sl No. 35.00 here-in-before, but 160mm bore complete all as specified and directed.

S&F in repairs PVC (SWR) branch piece, single (Single Y) equal or unequal for 110mm bore pipe complete all as specified and directed.

S&F in repairs PVC (SWR) branch piece, single (Single Y) equal or unequal for 75mm bore pipe complete all as specified and directed.

S&F in repairs PVC (SWR) junction, single (Single T) equal or unequal for 110mm bore dia pipe complete all as specified and directed.

S&F in repairs PVC (SWR) junction, single (Single T) equal or unequal for 75mm bore dia pipe complete all as specified and directed.

S&F in repairs PVC (SWR) bends any radius for 110mm bore dia pipe complete all as specified and directed.

S&F in repairs PVC (SWR) bends any radius for 75mm bore dia pipe complete all as specified and directed.

M&L for PVC (SWR) floor trap 75mm outlet dia., plain with grating including jointing with solvent cement and removing old trap and making good to floor complete all as specified and directed.

M&L for PVC (SWR) multi floor trap 75mm outlet dia., with grating including jointing with solvent cement and removing old trap and making good to floor complete all as specified and directed.

S&F in repairs 20 mm dia Harrison rails/ curtain rod/ dropery rod , mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and directed.

S&F in repairs brass, chromium plated shower rose 125 mm size with or without swivel joints including fixing to steel/ PVC pipe or union complete all as specified and directed.

S&F in repairs to worn out wooden pelmet boxes or cupboard shutter of 18/19 mm thickness particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work fixed with second class hardwood plugs 30x30x40mm embedded in wall with cement mortar (1:3) complete all as specified and directed.

S&F 100 mm long size aluminium handles, cast type, anodised complete all as specified and directed.

S&F 150 mm long size aluminium handles, cast type, anodised complete all as specified and directed.

Taking down of cement plaster, any description, including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 10 mm thick cement plaster on fair faces of brick work/concrete surfaces in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and directed.

M&L for applying two coats of distemper oil emulsion over a coat of alkali resistant primer including preparation of wall surfaces complete all as specified and as directed.

M&L for rendering 15 mm thick cement plaster on fair faces of brick work/concrete surfaces in cement mortar 1:4, finished even and smooth without using extra cement complete all as specified and directed.

M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

M&L for 5mm thick rendering in cement mortar 1:3 on fair faces of concrete surfaces as in ceiling finished even and smooth without using extra cement etc complete all as specified and directed.

M&L for applying three coats of white wash on ceiling, including preparation of new plastered surfaces complete all as specified and directed.

S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden beading complete all as specified and directed.

S&F 3mm thickness sheet glass, ordinary quality and glazing with wooden beads or oil putty in square not exceeding 0.50 Sqm in each pane, including hacking out existing old broken glass (any thickness, size, quality or description) from wooden frames or steel frames glazed with putty or fixed with beads complete all as specified and directed.

S&F 3mm thickness sheet glass, ordinary quality and glazing with wooden beads or oil putty in square exceeding 0.50 Sqm in each pane, including hacking out existing old broken glass (any thickness, size, quality or description) from wooden frames or steel frames glazed with putty or fixed with beads complete all as specified and directed.

S&F 3mm thickness figured glass, pin head type and glazing with wooden beads or oil putty in square not exceeding 0.50 Sqm in each pane, including hacking out existing old broken glass (any thickness, size, quality or description) from wooden frames or steel frames glazed with putty or fixed with beads complete all as specified and directed.

S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repairs corner glass of size 200 mm x 200 mm, fancy type with stainless steel frame and fixed to walls with screws complete all as specified and directed.

S&F in repairs stainless steel, toilet paper holder with flat recessed type complete all as specified and directed.

S&F in repairs PVC mirror cabinet of size 450 x 300 x 100 mm, ivory colour, fixed to walls complete all as specified and directed.

S&F brass chromium plated tubular towel rail, 20 mm dia, D type 60 cm long between flanges complete all as specified and directed.

S&F in repair aluminium alloy, anodised, sliding door bolt length 300mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S&F in repairs aluminium (extruded section body) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed.

S&F in repairs 200 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F in repairs 150 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

M&L for granite slab 20mm thick in black colour, machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, polishing and including 20 mm thick screed bed in CM 1:6, including demolition existing damaged slab complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) complete all as specified and directed.

M&L for 40 mm thick, PCC 1:2:4 type B-1, using 20mm graded granite stone aggregates as in flooring, paving finished surface even and smooth without using extra cement complete all as specified and directed.

M&L for glass dividing strips, 3mm thick and 38mm width complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for non-skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 20 mm thick screed bed in cement mortar 1:6 on stone/ brick masonry/ concrete surfaces complete all as specified and directed.

M&L for non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 20 mm thick screed bed in cement mortar 1:6 on stone/ brick masonry/ concrete surfaces complete all as specified and directed.

M&L for non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 15 mm thick screed bed in cement mortar 1:6 on stone/ brick masonry/ concrete surfaces complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surface 300x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, including 10 mm thick screed bed in cement mortar 1:4 on stone/ brick masonry/ concrete surfaces complete all as specified and directed.

Demolition of brick work/ PCC block / stone walls built in cement mortar including all quoins, arches, pillars and removing the debris/ rubbish to a distance not exceeding 100 mtr complete all as specified and directed.

M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 and brought up to course complete all as specified and directed.

Labour for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 and brought up to course complete all as specified and directed. (Stone are obtained from demolition shall be reused)

Extra over Granite or Trap stone walling for 40 mm maximum depression hammer dressing to face stones and dressing of face beds and joints, of random rubble walling, uncoursed or brought upto courses complete all as specified and directed.

M&L for flush pointing in cement mortar 1:4 to random rubble masonry, uncoursed or brought upto courses complete all as specified and directed.

M&L for pre-cast cement concrete block masonry type C1, 1:3:6 (using 20mm graded aggregate) with solid blocks exceeding 10 cm in width and setting in CM 1:4 complete all as specified and directed.

S&F in repairs Vitreous China Urinal, half stall type, white colour, including fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; complete all as specified and directed.

Taking down wooden shutters of any description exceeding 1 sq.m and not exceeding 2 sq.m each and refixing in same opening after carry out necessary repair work including easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc complete all as specified and directed.

S&F in repairs 100 mm long cold rolled mild steel butt hinges, medium weight complete all as specified and directed.

Taking down wooden shutters of any description not exceeding 1 sq.m each and refixing in same opening after carry out necessary repair work including easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc complete all as specified and directed.

S&F in repairs 75 mm long cold rolled mild steel butt hinges, medium weight complete all as specified and directed.

S&F in repairs floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, (overall length of cover plate 140mm) fixed in floor complete all as specified and directed.

Repairs to WC joints or similar joints filling with white cement and wet set (M seal) epoxy putty of Pidilite to stop leakage and finished properly complete all as specified and directed by Engr-in-Charge.

S&F in repairs brass, chromium plated, fancy type, hand shower including flexible PVC pipe with steel lining of 1.50 mtr long, chromium plated, with push button suitable for 15mm pipe complete all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick, overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm, kitchen with plugs, washers and wastes pipes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting unions to pipe complete all as specified and directed.

S&F in repairs sinks without drainage board made of stainless steel 1mm thick, overall size 495mm x 420mm and bowl size 410mm x 330mm x 160mm, kitchen with plugs, washers and wastes pipes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting unions to pipe complete all as specified and directed.

S&F in repairs stainless steel plate rack of size 90x78x23cm using 1mm thick sheet, standard pattern complete all as specified and directed.

S&F in repairs brass chromium plated mixer for mixing hot and cold water screwed down for 15mm bore dia. iron pipe complete all as specified and directed.

Taking down and refixing WHB or sink of any size using new rack bolts/ brackets in same locations complete all as specified and directed.

S&F 4 mm thick non-asbestos fibre cement building boards fixed or laid/ inserted to timber/ GI/ Aluminium frame work with screws on ceiling, including taking down existing damaged boards complete all as specified and directed.

S&F in repairs 300mm long mild steel, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F in repairs stainless steel wall mounted decorative type cloth hanger and hooks rail with 8 hooks of size 45cm x 4cm x 1.49mm thick of approved quality, rust resistant, including screws/ brackets complete all as specified and directed.

S&F in repairs health faucet (PVC Body) suitable for 15 mm dia pipe with 1.25 metre long chromium finish flexible tube and wall hook including making connections and fixed in position complete all as specified and directed.

S&F in repairs pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for 15mm bore dia iron pipe complete all as specified and directed.

S&F in repairs 4 Levers mortise lock, mild steel, size 100 mm, vertical type complete all as specified and directed.

SHILPA ENGINEERS AND CONTRACTORS (BID ID -3119923)

B.LAMBODHARAN (BID ID -3114281)

N SADANANDAN PILLAI (BID ID -3118102)