Notice Inviting Tender from OEMs for Manufacturing, Supplying, Installation, Testing and Commissioning of Kitchen Equipment at Permanent Campus of IIM Sirmaur

Amount

PULVERISER Body completely constructed of heavy duty Food Grade SS 304 with gear box mounted on the top the mixing bowl of ss 304 sheet 14 swg with ss 304 handle or arm to mix the dough and is operated electrically with heavy duty motor of 3 hp. Motor shall be S1 type of IS: 325 standards and of Kirloskar/ NGEF/ SIEMENS/ Crompton Greaves make, horizontally and tilted at 95 degree angle. Adjusters shall be of nylon Adjuster Bullet Feet in Legs.

MASALA GRINDER • Body structure:-Made of 16swg SS 304 sheet food grade Complete with revolving drum, grinding stone & wooden scrapper. •Motor: 1 h.p. Electric motor & gear box • Capacity of Drum: 20 liters capacity wet grinder, • Cycle of peeling:-8-10 Minuts/cycle • Grinder capacity of 20 liters. • Twin roller construction minimizes spillage • Vertical construction makes them occupy less space • Unit with wet grinder in stainless steel wired • Adjusters shall be of Nylon Adjuster Bullet Feet in Legs.

POTATO PEELER • Body structure:-Made of 16swg SS 304 sheet food grade and frame made by SS Angle. • Capacity of Drum- 20 KG • Motor: 1 h.p. Electric motor & gear box • Stainless steel housing. • Overloading protection. • Manual tumbler type switch. • Cam type pressure lock. • Quick opening removable hopper. • Synchronous 0.5 to 4 minute timer. • With Poly V belt. • With Multi grip. • Two angle mounted wipers. • Cabinet base with peel trap and SS strainer. • Adjusters shall be of Nylon Adjuster Bullet Feet in Legs.

POT RACK • Body Structurer:-body strucuter made by SS Angle and shelves made by 18 swg non-maganatic stainless steel 304 grade. • Nos.of Shelved -5 Nos. • All sides marine edges. • S.S. hat type reinforcement. • 38mm x 38mm x 16 Gauge. S. S. square pipe uprights. with s.s. adjustable bullet feet • S.S. shelves welded to S.S. square pipe uprights. • Adjusters shall be of Nylon Adjuster Bullet Feet in Legs.

STOCK POT • Body Structure:-Made by food grade stainless steel 304 with Non- Maganatic along with dully rusted proofed. • Top made of 14Guage . S.S. Top. • Top and body secured to 12/25mm x 75mm x 25/12mm, 1.6 mm Thick S.S. hat type welded • Channel frame work. • Exterior Body 18 Guage S.S. cladding. • 25mm x 25mm S.S. square pipe under shelf. • One (1) no. 450mm x 450mm Cast iron grate (Removable). • One (1) no. 18 Guage S.S. drip tray with Integral handle. • Built in pressure Controller regulator. • 38mm x 38mm S.S. square pipe legs. With S.S. adjustable bullet feet. • Four (4) No. Wall mounted single spot swivel type Pot filler faucet to be provided and control on range, Make- T & S or Jakson. • Having Standard length Gas pipe & regulator for connection to Main gas pipe line • 100mm setback Body/legs for Gas pipe routing. • Adjusters shall be of Nylon Adjuster Bullet Feet in Legs.

CHAPATI MAKING MACHINE • Capacity 1000 Nos / Hr • Thickness of Chappati - 1 to 2.5 mm • Size of Chappati – 3” to 7.5” • Gas Pressured – 0.5 K.G. • Unibody Concept • Convenient chapati thickness and size adjustment feature according to custom requirement • Lesser operational noise when making chapati • Insulation to minimize overall heat loss and reduce outer machine body temperature • Functionally-advanced energy efficient heaters and sensors • Rust-proof stainless steel outer machine structure and cover • Low maintenance machine with easy-to-open body cover, superior quality gear box and motor • Pedda Machine- Cap- 1000 nos./hr • Highly-efficient dough ball making machine with easy-to-use and convenient features • User-friendly settings and features to control the size and weight of dough balls • Compact size - less floor space requirement • High-quality structure manufactured using superior grade raw materials requiring low maintenance • Caster wheel:- Heavy duty caster wheel used with lockable.

DEEP FREEZER (One for Kitchen as/layout+ One taken for additional usage) Type -Top Opening Brand -Voltas/ Blue Star/ Rockwell or Equivalent Capacity- 500 LTR Temperature Range- -25 To +8 Deg. C Power Consumption- 3 To 12 Unit / Day Number Of Doors- 2

WORK TABLE WITH 2 U/S • 150mm High Rear splash, Back Splash to be Covered with 20Gauge . S.S. Sheet. • S.S. Top: 16 Guage • Top and body secured 38mm x 38mm x 3mm Thick S.S. welded angle frame work. • Full width 18 Guage S.S. Bottom & intermediate shelves. • 4 No. 38mm Dia. S.S. legs with S.S. adjustable bullet feet. • Adjusters shall be of Nylon Adjuster Bullet Feet in Legs.

FOUR DOOR REFRIGERATOR Body Structurer:- Body structurer made by SS Angle along covered with food grade stainless steel 304 grade non-maganatic steel with 60MM puf insullted body. Insulation:- Double ss sheet double walled insluated with puf. Tank:- inner tank of 22 swg and outer of 20 swg ss sheet the inner chamber will have 6 nos. Door:- No. of door 4 with insulated along with gasket heavy duty with spring activated with locking arrangements. Shelves:- Wires mesh jaali adjustable shelves. Adusters:- Adusters using in four legs. Compressor:- Kirloskar (Immerson), SIEMENS/ Crompton Greaves and condenser make with automatic tempreture control system along with digital indicater system. Temp:- 0°C to 10 °C. (digital controller) Capacity:-1600Ltrs Caster wheel:-Using Caster wheel with lockable and non lockable for easy mobility Brand -Voltas/ Blue Star/ Rockwell or Equivalent

HOT PLATE • 150mm High Rear splash, Back Splash to be Covered with 20Gauge . S.S. Sheet. • Full width x 1200mm x 20mm thick M.S.Plate with front gutter & S.S. grease drawer. • Exterior 18 Guage S.S. cladding. • Built in pressure Controller regulator. • 38mm x 38mm x 16 Guage S.S. Square pipe legs with S.S. adjustable bullet feet. • 25mm x 25mm S.S. square pipe under shelf. • Having Standard length Gas pipe & regulator for connection to Main gas pipe line • Two (2) no. “V” type H.P. burner with pilot lamp & Control Valve. • 100mm setback Body/legs for Gas pipe routing.

EXHAUST HOOD-1 • External and internal parts to be manufactured in SS 304 • 18 Guage Welded Body Construction. • Removable 18 Guage S.S "V" section, measuring 510*510*50 mm thick, in full length w/bottom of filters set in continuous channel. • Grease gutter on rear and side in each piece. • LED lights. • Wiring should be in Heat resistant conduits. • To be suspended on ceiling with hanger rods. • Height/Exhaust /Fresh air duct Collar size, shape & Qty. to be verifying at site/coordinate HVAC consultants.

EXHAUST HOOD-2 • External and internal parts to be manufactured in SS 304 • 18 Guage Welded Body Construction. • Removable 18 Guage S.S "V" section, measuring 510*510*50 mm thick, in full length w/bottom of filters set in continuous channel. • Grease gutter on rear and side in each piece. • LED lights. • Wiring should be in Heat resistant conduits. • To be suspended on ceiling with hanger rods. • Height/Exhaust /Fresh air duct Collar size, shape & Qty. to be verifying at site/coordinate HVAC consultants.

TWO BURNER RANGE • 14 Guage S.S. Top. • 150mm High Rear Splash, Back Splash to be Covered with 20Gauge . S.S. Sheet. • Top and body secured to 12/25mm x 75mm x 25/12mm 1.6 mm Thick S.S. hat type welded channel frame work. • Exterior 18 Guage S.S. cladding. • Built in pressure Controller regulator. • 38mm x 38mm x 16 Guage S.S. Square pipe legs with S.S. adjustable bullet feet. • 25mm x 25mm S.S. square pipe with under shelf. • 2 No. 400mm x 400mm Cast iron Grate (Removable). • Two (2) no. 18 Guage S.S. drip tray with Integral handle. • Two (2) no. H.P. burner with separately pilot lamp. • Having Standard length Gas pipe & regulator for connection to Main gas pipe line • 100mm setback Body/legs for Gas pipe routing.

UNDER COUNTER REFRIGERATOR (One for Kitchen as/layout+ One taken for additional usage) • 150mm High Rear splash, Back Splash to be Covered with 20Gauge . S.S. Sheet. • Capacity (Ltrs): 265 • Temperature Range: -2°C ~ 10°C • GN Compatibility: 1 x GN 1/1 • Tropicalized to perform at 38°C Ambient • Compressor: Kirloskar (Immerson), SIEMENS/ Crompton Greaves • Dixell Controller • EBM Fan Motor • SS 304 Food Grade Steel • Castors • Lock • Refrigerant gas: R-134 a. • Four (4) SS removable & Adjustable shelves. • Ventilated Cooling • Environment Friendly Refrigerant • Housing on Right Side. • Four (4) no. 38mm Dia S.S. tubular legs. • Door activated light on – off. Hot gas automatic evaporation of defrost water. • Fully compliant HACCP digital control. • Brand -Voltas/ Blue Star/ Rockwell or Equivalent

PICKUP COUNTER Structure will be made of 35 x 35 x 5 mm S.S angle duly painted with rust proof paint. Top of the working table will be made of 16SWG Food Grade S.S.304 Sheet. With one under shelf made of 18SWG Food Grade S.S.304 Sheet. One over head shelf will be made of 18 SWG S.S Sheet, provided with 1 KW air element to keep dishes warm. Tubular legs made of 1.5” S.S. Square pipe with adjustable bullet feet. Three side covering of the unit will be made of 20 SWG S.S. sheet.

STORAGE RACK • Five 18 Guage S.S. Shelves. • All sides marine edges. • S.S. hat type reinforcement. • 38mm x 38mm x 16 Guage S. S. square pipe uprights. with s.s. adjustable bullet feet • S.S. shelves welded to S.S. square pipe uprights.

PALLET • Made by stainless steel Square pipe shelves in dunnage rack • Pallate with hairline finishing. • Grating has to be slip-resistant for one side, Plain on the other. • Minimum point load-250 K.G. per square meter. • Spot welding not to be used. • Suitable to be for fitting with type of flooring coming at site.

MAIDA BIN • 25mm X 25mm 14Guage S.S. outer frame work. • (4) No. 38mm DIA S.S. pipe legs W/S.S. Adjustable Bullet Feet • As shown front, top, rear, both sides & centre S.S. Rod partition. • 6mm THK. S.S. rod welded to outer frame at 100mm • Front, top rear & sides 6mm thick S.S. rod Cladding. • 16 Guage S.S. base sloped rear to front. • 18 Guage S.S. front/top hinged doors w/rod handle.

BESAN BIN • Made by food grade stainless steel SS 304 • 25mm X 25mm 14Guage S.S. outer frame work. • (4) No. 38mm DIA S.S. pipe legs W/S.S. Adjustable Bullet Feet • As shown front, top, rear, both sides & centre S.S. Rod partition. • 6mm THK. S.S. rod welded to outer frame at 100mm • Front, top rear & sides 6mm thick S.S. rod Cladding. • 16 Guage S.S. base sloped rear to front. • 18 Guage S.S. front/top hinged doors w/rod handle.

ONION BIN • Made by food grade stainless steel SS 304 • 25mm X 25mm 14Guage S.S. outer frame work. • (4) No. 38mm DIA S.S. pipe legs W/S.S. Adjustable Bullet Feet • As shown front, top, rear, both sides & centre S.S. Rod partition. • 6mm THK. S.S. rod welded to outer frame at 100mm • Front, top rear & sides 6mm thick S.S. rod Cladding. • 16 Guage S.S. base sloped rear to front. • 18 Guage S.S. front/top hinged doors w/rod handle.

POTATO BIN • Made by food grade stainless steel SS 304 • 25mm X 25mm 14Guage S.S. outer frame work. • (4) No. 38mm DIA S.S. pipe legs W/S.S. Adjustable Bullet Feet • As shown front, top, rear, both sides & centre S.S. Rod partition. • a) 6mm THK. S.S. rod welded to outer frame at 100mm • Front, top rear & sides 6mm thick S.S. rod Cladding. • 16 Guage S.S. base sloped rear to front. • 18 Guage S.S. front/top hinged doors w/rod handle.

ATTA BIN • Made by food grade stainless steel SS 304 • 25mm X 25mm 14Guage S.S. outer frame work. • (4) No. 38mm DIA S.S. pipe legs W/S.S. Adjustable Bullet Feet • As shown front, top, rear, both sides & centre S.S. Rod partition. • 6mm THK. S.S. rod welded to outer frame at 100mm • Front, top rear & sides 6mm thick S.S. rod Cladding. • 16 Guage S.S. base sloped rear to front. • 18 Guage S.S. front/top hinged doors w/rod handle.

DAL/RICE BIN • Made by food grade stainless steel SS 304 • 25mm X 25mm 14Guage S.S. outer frame work. • (4) No. 38mm DIA S.S. pipe legs W/S.S. Adjustable Bullet Feet • As shown front, top, rear, both sides & centre S.S. Rod partition. • a) 6mm THK. S.S. rod welded to outer frame at 100mm • Front, top rear & sides 6mm thick S.S. rod Cladding. • 16 Guage S.S. base sloped rear to front. • 18 Guage S.S. front/top hinged doors w/rod handle.

RECEIVING TABLE • Made by food grade stainless steel SS 304 • 150mm High Rear splash, Back Splash to be Covered with 20Gauge . S.S. Sheet. • 16 Guage S.S. Top. • Top and body secured 38mm x 38mm x 3mm Thick S.S. welded angle frame work. • Full width 18 Guage S.S. Bottom & intermediate shelves. • 4 No. 38mm Dia. S.S. legs with S.S. adjustable bullet feet.

TWO SINK UNIT • All SS 304 Grade Construction • 14 Guage SS Sheet top with sound deadening 38x38x3mm SS Angle Framework. Top (12mm sunken) have marine bend on front side. • Sink Size of 585x600x350 • 25 mm Dia SS pipe cross bracing on 3 sides, rear open. • 38 mm SS square pipe legs with adjustable bullet feet. • Splash at against wall, Back Closed with 20 Guage SS Sheet

BUSSING TROLLEY • 14 Guage S.S. top channel shape. • Four (4) no. 38mm dia. uprights on Castors. • 38mm dia. S.S. pipe handle with pipe reinforcement. • 150mm high 12mm Dia. S.S. pipe railing rear & both sides • (4) no. heavy duty 125mm dia. noise less rubberized castors all with brakes. • Under sides of top shall be reinforced W/ 25 X 100 X 25 16Gauge S.S inverted channel. • Wheel Stopper required

DISHLANDING TABLE • 150mm high rear splash in front of wall(working side), Back Splash to be Covered with 20Gauge . S.S. Sheet. • 14 Guage S.S. Top. • Top and body secured 38mm x 38mm x 3mm Thick S.S. welded angle frame work,hat type welded channel frame work. • Front & free sides turned up 75mm, returned 40mm, turned down 50mm & in 12mm. • Left of unit One (1) no. 450mm x 450mm x 200mm deep 16 Guage S.S. sink, Sink Complete with 50mm dia lever handle operated waste outlet & rear connected overflow. • (6) no. 38mm Dia S.S. legs. With S.S. adjustable bullet feet. • 1800mm long 18 Guage Table mounted rack shelf, mounted at 535mm above working top. • 150mm dia. x 100mm high garbage chute location as per plan. • Complete with Angle rack guide, S.S. trough with antisplash grating. • 1 No. Deck Mounted Swivel type water Mixer faucet. MAKE - T& S /JAKSON or Equivalent • 20 Guage S.S. Apron front of sink, sink on right hand side.

LOADING TABLE • Body Structure:- Made by food grade stainless steel with non-maganetic steel 304 grade • 150mm High Rear splash, Back Splash to be Covered with 20Gauge . S.S. Sheet. • 16 Guage S.S. Top. • Top and body secured 38mm x 38mm x 3mm Thick S.S. welded angle frame work. • Full width 18 Guage S.S. Bottom & intermediate shelves. • 4 No. 38mm Dia. S.S. legs with S.S. adjustable bullet feet.

DISHWASHER HOOD TYPE Capacity:-80racks/hr dishes(1440) Water consuption:- 2ltrs/cycle, ensuring low energy, water, detergent and rinse aid consuming. No of cylce:-3 (45/84/150 in seconds) Water Tank Capacity:-24ltrs Power consumption:-12KW Net weight:-117kg Approffed by:- ETL C & US and ETL-Sanitation approved (ANSI/NSF 3 sanitation standard). Key features:- Green&Clean Hood Type Dishwasher,Manual with Brand Name:-BOSCH / LG/ IFB

UPLOADING TABLE • Body Structure:- Made by food grade stainless steel with non-maganetic steel 304 grade • 150mm High Rear splash, Back Splash to be Covered with 20Gauge . S.S. Sheet. • 16 Guage S.S. Top. • Top and body secured 38mm x 38mm x 3mm Thick S.S. welded angle frame work. • Full width 18 Guage S.S. Bottom & intermediate shelves. • 4 No. 38mm Dia. S.S. legs with S.S. adjustable bullet feet.

PERFORATED TABLE FOR CUTLERY BOWL & GLASS Providing perforated Table made by food grade stainless steel with non-magnetic steel 304 grade with SS jali of aperture to adequality drain out the water. - vertical legs of ss round pipe of 16 swg, 1.5” diameter with nylon adjustable feet.

FOUR SINK UNIT • Body Structure:- Made by food grade stainless steel with non-maganetic steel 304 grade • 14 Guage S.S. Top • Front sides turned up 75mm, returned 40mm, turned down 50mm & in 12mm. • 150mm High Rear Splash, Back splash to be covered with 20Gauge . S.S. sheet. • Top secured 25mmx 100mm x 25mm 14 Guage S.S. Channel frame work. • Center of unit Four (4) no. 550mm x 550mm x 300mm deep 14 Guage S.S. sink, Sink Complete with 50mm dia. lever. Handle operated waste outlet & rear connected overflow. • (6) no. 38mm Dia S.S. legs. With S.S. adjustable bullet feet. • 25mm Dia. S.S. pipe cross bracing welded to legs at Front & both sides. • 3 No. Wall Mounted Swivel type water Mixer Faucet. MAKE - T& S /JAKSON • 20Gauge S.S Apron front of unit.

WIPING TABLE • Body Structure:- Made by stainless steel with non-maganetic steel 304 grade • 150mm High Rear splash, Back Splash to be Covered with 20Gauge . S.S. Sheet. • 16 Guage S.S. Top. • Top and body secured 38mm x 38mm x 3mm Thick S.S. welded angle frame work. • Full width 18 Guage S.S. Bottom & intermediate shelves. • 4 No. 38mm Dia. S.S. legs with S.S. adjustable bullet feet. • Two 18 Guage S.S. over shelf Top mounted welded with frame work, Mounted at 300 & 650mm Above working top.

CLEAN DISH RACK • Four (4) no. S.S. pipe shelves. • First shelf 300 A.F.F., Second 900 A.F.F. Third shelf 1375mm A.F.F. & Fourth shelf at 1850mm A.F.F. • Shelf outer tube 32mm dia. S.S. pipe with 25mm dia. S.S pipe welded to outer tube at 75 c/c. • (4) no. 38mm dia. S.S. pipe upright on castor. • (4) no. 150mm dia. Noise free rubberized castors two with brakes. • Wheel Stopper required.

WORK TABLE WITH 2 U/S • Body Structure:- Made by food grade stainless steel with non-maganetic steel 304 grade • 150mm High Rear splash, Back Splash to be Covered with 20Gauge . S.S. Sheet. • 16 Guage S.S. Top. • Top and body secured 38mm x 38mm x 3mm Thick S.S. welded angle frame work. • Full width 18 Guage S.S. Bottom & intermediate shelves. • 4 No. 38mm Dia. S.S. legs with S.S. adjustable bullet feet.

PICKUP COUNTER • Body Structure:- Made by stainless steel with non-maganetic steel 304 grade Structure will be made of 35 x 35 x 5 mm S.S angle. Top of the working table will be made of 16SWG S.S. Sheet. With one under shelf made of 18SWG S.S. Sheet. One over head shelf will be made of 18 SWG S.S Sheet, provided with 1 KW air element to keep dishes warm. Tubular legs made of 1.5” S.S. Square pipe with adjustable bullet feet. Three side covering of the unit will be made of 20 SWG S.S. sheet.

GAS FIRED TANDOOR Body structure:- Body structurer use S.S. Angel and covered by Food grade stainless steel using in structure with clay inside Supplying, Providing and Fixing Gas Fired Tandor ( LPG) with United burner with high pressure made of body made of 304 Grade Structural Steel and Glass Wool weight 280kg, capacity 200 ltr. With Mounth Dia of 16 inch along with standard length gas pipe and regulator. Caster Wheel:-Heavey duty with lockable

WALK IN CHILLER Supply, Installation, Testing and Commissioning of Walk in Chiller and to be cooled with single cooling unit. The facility shall have microprocessor based control system located at one place. The cold storage should be of robust design, easy in operation and trouble free service. The cold storage facility should be able to work continuously at the ambient temperature and humidity at preset temperature.with PUF Panel of thickness 100mm, Surface Material S.S. Sheet (Grade 304) with For Kota stone floor,Swing Door with FRP Profile with imported Hardware shall meet the below specifcation: Room Size ( Internal) - 1.8 (W) x2.80 (D) 3.0 (H) m • R404A refrigerant • Temprature Range -20 Degree C to +5 Degree C • Robust weather-resistant housing • Highly reliable Copeland scroll compressor or equivalent • Liquid receiver with fusible plug • Adjustable HP/LP pressure safety switch • Liquid line with sight glass and filter drier factory fitted • IP54 rated control panel • Noise data tested to ISO 3774-2 standard • Oil separator and check valve for low temperature models • Polyurethane foam insulation for improved noise reduction • Externally mounted service valves for easy isolation and an extended tail for easy installation • Hexagon head screws and stainless steel washers for easy removal of access panels • Isolator with integrated MCB for improved electrical layout • Fan speed controller •Supply, Fabrication , Cutting, Welding , Erection at site and cold compound zinc coating of M. S. Angle supportwork for outdoor unit location

Supply, Installation, Testing and Commissioning of Walk in Chiller and to be cooled with single cooling unit. The facility shall have microprocessor based control system located at one place. The cold storage should be of robust design, easy in operation and trouble free service. The cold storage facility should be able to work continuously at the ambient temperature and humidity at preset temperature.with PUF Panel of thickness 100mm, Surface Material S.S. Sheet (Grade 304) with For Kota stone floor,Swing Door with FRP Profile with imported Hardware shall meet the below specifcation: Room Size ( Internal) - 3.85 (W) x2.55 (D) 3.0 (H) m. • R404A refrigerant • Temprature Range -20 Degree C to +5 Degree C • Robust weather-resistant housing • Highly reliable Copeland scroll compressor or equivalent • Liquid receiver with fusible plug • Adjustable HP/LP pressure safety switch • Liquid line with sight glass and filter drier factory fitted • IP54 rated control panel • Noise data tested to ISO 3774-2 standard • Oil separator and check valve for low temperature models • CE marked • Polyurethane foam insulation for improved noise reduction • Externally mounted service valves for easy isolation and an extended tail for easy installation • Hexagon head screws and stainless steel washers for easy removal of access panels • Isolator with integrated MCB for improved electrical layout • Fan speed controller •Supply, Fabrication , Cutting, Welding , Erection at site and cold compound zinc coating of M. S. Angle supportwork for outdoor unit location

Gas Pipe Line with Accessries suitable for 6 cylinder running mode and 4 on stand by mode: 1. Cylinder Adapter - United Works, Gaso or Equivalent 2. Non Return Valve - United Works, Gaso or Equivalent 3. Needle Control Valve -United Works, Gaso or Equivalent 4.Manifold Valve -United Works, Gaso or Equivalent 5. Cylinder Hose Pipe -United Works, Surksha or Equivalent 6. Burner Hose Pipe -United Works, Surksha or Equivalent 7 .Line Valve -United Works, Acron or Equivalent 8. M.S Pipe -Jindal or Equivalent 9. Pressure Guage -United Works, H.Guru or Equivalent 10. Manifold -United Works, Jindal or Equivalent

Gas Bank with Manifold:-Made of M.S. Angle( 35X35X5mm) and M.S. Welded Mesh of Size 25X25X4mm. M.S.Welded Mesh Shall be fixed with M.S. Angle duly Painted along with suitable coat of Primer. Gas bank Top Shall be Covered with Corrugated G.I. Sheet of 0.5 mm Thickness of approved Shade Similar to M.S. Roof. Entire System Shall be provided with Lockable System along with Door. Space shall be povided for 6 Cylender running mood & 4 for stand mood on it. Internal valve Shall be joined of many folder.

JB Equipments