15th Finance Tied (Drinking Water)

Drilling of Bore well by down the hole hammer drilling to a finished dia of 165 mm dia in all formations suitable for down the hole hammer drilling such as medium hard rock formation to hard rock formation, all consolidated formation etc. and drilling in over burden to dia not less than 200 mm etc and reaming the bore well to suit insertion of suitable casing pipe etc., including insertion of casing pipe with couplings, caps any other relevant materials upto required depth as directed by the department including transportation of drilling rigs and supporting vehicle and including bore development (Flushing of Bore Well at an average pressure of 150 PSI) conducting yield test, consumables charges, Crew charges required in fixation of pipe assembly completely done to the satisfaction of the department and including all labour charges the cost of casing pipe, couplings, cap etc., The entire work should be carried out as per IS -2800 Part I & II 1979. the rate inclusive of cost of overheads & Contractor's profit @13.615% ( 165mm dia upto 90m depth)

Cost, Supply and Fixing of 180 mm dia 6 Kg/cm2 PVC Casing pipe including cost, conveyance of materials and all labour charges, the rate inclusive of overheads & Contractor's profit @13.615%

Supply and Transportation of 2.0 HP 25 stage 5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with waterproof winding, pump shall be suitable for various delivery head and discharge with stainless steel shaft motor suitable for working on 240V ± 10%, single phase 50 Hz AC supply, etc complete for 4" Bore well.The rate inclusive of over heads and contractor's profit @13.615%

Fabrication , transportation and supply of suitable size panel board for single phase submersible motor 2 to 3HP consisting of relay, Contactor, starting and running capacitors, Voltmeter, Ammeter, indicator lamps, MCB , on/off switch including supply and fixing of DOL starter of complete.,.For 2.0 HP Single phase motor , the rate inclusive of overheads & contractor's profit @13.615%

Supply and delivery of 90mm dia HDPE Pipes PE-100, 6 Kg/cm2 as per IS 4984/2016 including cost, conveyance for 1.00 Rmt , the rate including overheads and contractor's profit @13.615%

Earth work excavation for Pipe line trenches 90mm dia HDPE 6kg /cm2 (2/3 machinery and 1/3 manual ) in all soils except rocky soils including lowering , laying and jointing of pipes with required fittings /specials true to alignment and gradient, refilling with already excavated earth, watering ,tamping and removing surplus earth and testing to required hydraulic test pressure etc.complete excluding cost of specials/fittings for finished item of work The rate is inclusive of cost of overheads and contractors profit @13.615% .

Total Number of item six (6) only