CA NO GE(SOUTH)/AMB 83/2025 2026 ADDITION/ALTERATION OF BLDG NO 111 AND 113 INCLUDING TOILET BLOCK UNDER GE (SOUTH) AMBALA

[B&R PORTION] Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing debries out side defence area complete all as specified and directed by Engineer-in-Charge.

Material and labour for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including cement screed bed 15mm thick in CM 1:4 base, complete all as specified and directed by Engineer-in-Charge.

Material and labour for Non - skid coloured Ceramic tiles 7 to 8 mm thick light shade (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including cement screed bed 15mm thick in 1:4 base, complete all as specified and directed by Engineer-in-Charge.

All as per item no 3.00 here in before but in vertical surfaces as in skirting / dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl. 10mm thick backing coat in CM 1:3 complete all as specified and directed by Engineer-in-Charge.

Material and labour for coloured glazed ceramic tiles coloured of size 300x 450x 7mm thick in vertical surfaces and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10mm thick in cement mortar 1:3 complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa tensile strength as in roof covering/cladding to wall, fixed with self tapping screws or J type hooks including rubber washer etc including dismantling existing asbestos cement corrugated or semi-corrugated sheets etc; complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of pre-painted galvalume aluminium zinc coating GI based galvanised plain mild steel sheeting 0.50 mm thick of any colour, having 550 Mpa tensile strength as in roof covering/ ridges and fixed with self tapping screws or J type hooks including rubber washer etc including dismantling existing asbestos cement corrugated or semi-corrugated sheets etc; complete all as specified and directed by Engineer-in-Charge.

Dismantling timber scantling 40 sq.cm and over and in section in any position complete all as specified and directed by Engineer-in-Charge.

Supply and fixing, structural rolled mild steel Fe 410-00 (Gde E-250) as in post rafters perlins where connected to common rafters and running rail fixed with angle cleats or other connecting plates etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of rolled mild steel works as in bands, straps, wind ties, angle cleats and similar small articles etc conforming to Fe-290 Gde E-165 including dismantling existing mild steel complete all as specified and as directed.

Demolition of brick work built in cement mortar or cement lime mortar including all pillars, quoins etc., complete all as specified and directed by Engineer-in-Charge.

Material and labourfor Brick work with sub class ‘B’ bricks, locally known as “Awwal” straight or curved on plain not exceedingeding 6 metre mean radius in cement mortar (1:6), , complete all as specified and directed by Engineer-in-Charge.

Taking down cement plaster on brick wall/concrete surfaces etc including racking out joints hacking for key scrubing down with water etc of any thickness including dado complete all as specified and directed by Engineer-in-Charge.

Material and labour for 15 mm thick rendering on faces of brick or concrete surfaces in CM 1:4 . finishing the surface even and fair without using extra cement.complete all as specified and directed by Engineer-in-Charge.

Material and labour for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces of walls finishing the surface even and smooth complete all as specified and directed by Engineer-in-Charge.

Material and labour for rough cast plaster on exterior walls in two layers, under layer 10mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm Rough cast plaster with sand gravel as specified as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the surface complete all as specified and directed.

Material and labour for two coats of cement base paint over a coat of alkali resistant primer of new surfaces of walls including preparation of surfaces complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation new plastred surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer applying with roller etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparing old surface on walls and applying one coats of cement base paint complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparing old plastered surface of wall and applying one coats of oil bound distemper including whitener etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparing old plastered surfaces of ceiling and applying one coat of white washing complete as all specified and directed.

Taking up or down steel tubing and connections for 15mm dia including cleaning for refixing or removal to store complete all as specified and directed by Engr-in-charge.

Supply and fixing Steel water tubing of 15 mm bore, medium grade galvanized, with all fittings laids in floor with wall and on ceiling, complete all as specified and directed.

Taking up or down steel tubing and connections for 20mm dia including cleaning for refixing or removal to store complete all as specified and directed by Engr-in-charge.

Supply and fixing Steel water tubing of 20 mm bore, medium grade galvanized, with all fittings laids in floor with wall , complete all as specified and directed .

Material and labour for cutting chases for concealed water tubing and making good, (cutting not exceeding 10 cm girth in brick walls) in cement mortar (1:3), complete all as specified and directed by Engineer-in-Charge.

Supply and fixing PVC (SWR) Nahani /Floor trap, 75 mm dia of out let, plain with grating including jointing to waste pipe with solvent cement complete all as specified and directed by Engineer-in-Charge.

Material and labour for PVC water storage tank 500 Litre capacity HDPE triple layer fixed and hoisted in position on staging or roof complete with locking arrangement, over flow pipe, air lock pipe, Ball valves, high pressure of PTMT with, including dismantling of old tanks of any description complete all as specified and directed by Engineer-in-Charge.

Supply and fixed (in repair) 15mm fancy type, chromium plated, angle cock, cast copper alloy, screwed down high pressure with crutch or butterfly handle, heavy with adjustable wall flange, complete all as specified and directed by Engineer-in-Charge.

Supply and fixed (in repair) stop cock, fancy type, chromium plated, long sank and cup (concealed type) screwed down high pressure with crutch or butterfly handle screwed at both ends suitable for 15mm bore pipe, complete all as specified and directed by Engineer-in-Charge.(Note : Weight of stop cock shall not be less than 0.575 Kg) (Note : Weight of stop cock shall not be less than 0.575 Kg)

Supply and fixed ( in repair) CP bib tap screwed down high pressure, long body, cast copper alloy, chromium plated` with crutch or butterfly handles screwed down suitable for 15mm bore pipe or union, complete all as specified and directed by Engineer-in-Charge. (Note : Weight of bib tap shall not be less than 0.575 Kg)

Supply and Fixed (in repair) vitreous China squatting pan of Orrisa pattern size 580 x 440mm white (Ist quality) with ‘P’ or ’S’ trap, front or back inlet and foot rests of any pattern including provision of lime concrete bed and connection to flush pipe excluding flushing cistern, flush pipe and bracket and making good the disturbed area complete all as specified and directed by Engineer-in-Charge.

Supply and fixed (in repair) vitreous china wash hand basin white flat back of size 550x440mm including CI brackets and 15mm chromium plated pillar tap, PVC connection 450 mm long having PTMT nuts and chromium plated waste coupling and making good to disturbed portion including 32 mm dia PVC waste pipe etc., complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Viterous china urinal half stall back or corner type bedding urinal against wall in cement mortar 1:2 securring urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement fixing automatic flushing cistern with brackets flush pipe, grating and union for discharge pipe complete all as specified and directed by Engr-in-Charge

Supply and fixed in repair 10 litre capacity flush polypropylene cistern white at low level complete with PVC bend/flush pipe and making all connection including taking down existing high/low level cistern with all connections and making good the disturbed surfaces in cement mortar (1:3) to match with the existing surface, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair for fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair towel rail complete as specified and directed by Engr in charge.

Supply and fixing in repair Soap dish, fixed to plugs with chromium plate brass screws complete as specified and directed by Engr in charge.

Supply and fixing in repair cast copper alloy, chromium plated shower rose including long pipe complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair 32/38 mm PVC waste pipe for urinal , wash hand basin and sink complete all as specified and directed by Engineer-in-Charge.

Supply and fixed (in repair) PVC connections 450/600 mm long and 15mm dia PTMT with PVC washers on both ends, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12mm wide and chromium plated brakects guard and railing 60cm long complete as specified and directed by Engr in charge.

Demolition and breaking up drain pipes of 100/75 mm dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed by Engineer-in-Charge.

Supply and fixing PVC (SWR) 110 mm pipe single socket in any length with rubber ring joints fixed to wall or laid in floors complete all as specified and directed by Engr in charge.

Supply and fixing PVC (SWR) bends 110 mm bore complete all as specified and directed by Engineer-in-Charge.

Supply and fixing PVC (SWR) 75 mm pipe single socket in any length with rubber ring joints fixed to wall or laid in floor complete all as specified and directed by Engr in charge.

Supply and fixing PVC (SWR) bends of 75mm radius, complete all as specified and directed by Engr in charge.

Supply and fixing 75mm PVC (SWR) junction single,(Single T) equal or unequal provided with access door, complete all as specified and directed by Engr in charge.

Supply and fixing PVC (SWR) vent cowl of 75mm dia complete all as specified and directed by Engineer-in-Charge.

Supply and fixing PVC (SWR) junction single, (Single T) equal or unequal of 110mm dia with access door complete all as specified and directed

Supply and fixing PVC (SWR) reducer 'Y' type 75 x 110 mm complete all as specified and directed by Engineer-in-Charge.

Supply and fixing PVC (SWR) vent cowl of 110mm dia, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Ball brass valves,of 20mm bore high pressure, with polythene float and flynut screwed for iron pipe or brass ferrule and complete all as specified and directed by Engineer-in-Charge.

Taking down wooden chowkats or frames with shutter (without taking off shutter from the frames), area exceeding 1.5 Sqm and not exceeding 4.00 Sqm each, complete all as specified and directed by Engineer-in-Charge.

Taking down wooden chowkats or frames with shutter (without taking off shutter from the frames), area not exceeding 1.5 Sqm each, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of windows made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick “D” Quality galvanized as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 48 x 25mm. Outer frame and mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars/ grills fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Elixir or equivalent stay, handles 2nos of heavy duty stain less steel pivot hinges shall be provided per shutter. The windows should be panelled with 4 mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade). Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self expanding screws. Including 10mm square guard bars with 6” (152.4mm) pitch, complete all as specified and directed by the Engr-in-Charge.(Make: A2Z Infra Solutions/ Elixir Met form Pvt Ltd./ Urban Spaces)

Supply and fixing of ventilators made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick “D” Quality galvanized as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 48 x 25mm. Outer frame and mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars/ grills fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Elixir or equivalent stay, handles 2nos of heavy duty stain less steel pivot hinges shall be provided per shutter. The windows should be panelled with 4 mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade). Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self expanding screws. Including 10mm square guard bars with 6” (152.4mm) pitch, complete for finished with suitable provision as in ventilator in toilet/bathroom/staircase complete all as specified and directed by the Engr-in-Charge (Make: A2Z Infra Solutions/ Elixir Met form Pvt Ltd./ Urban Spaces)

Supply and fixing of Factory made single extruded WPC (Wood Polymer Composite) solid door Frames/Chowkhat of size 75 x 50 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) and 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant Note: For WPC solid door frames, minus 5mm tolerance in Dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Supply and fixing of Factory made single extruded WPC (Wood Polymer Composite) solid door Frames/Chowkhat of size 125 x 65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) and 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant Note: For WPC solid door frames, minus 5mm tolerance in Dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Supply and fixing of Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) and 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant Fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws

Supply and fixing of providing 30 mm thick factory made 100% Solid WPC (Wood polymer Composite) Jointless gauzed and skeleton Shutter of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ),alcium Carbonate andnatural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheetSingle Extruded ( Inner ) with having minimum density not less than 650 kg/cbm manufactured and an ISO 9001 -2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) and 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 Modulus of elasticity 850N/mm2and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. Fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws incl Aluminum Jali and Stainless wiremess as per required. complete all as specified and directed by Engineer-in-Charge. Material test certificate and authentication should be compulsory provided by the manufacturing company

Supply and fixing 250 mm aluminum anodised sliding door bolts, with hasp, staple (bolt type) complete with clamps bolt not less than 16mm dia and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolt of extruded section or cast aluminum alloy, complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparing new steel surfaces of any description , over 10 cm width or girth and applying two coats of synthetic enamel paint(first quality) over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.

Material and labour for PCC 1:2:4 type B-1, (using 20mm graded mechanically crushed stone aggregate) as in bed blocks for hold fasts, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for Aluminium anodised, 200mm long barrel tower bolts of extruded section complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 150mm long extruded aluminium alloy handles, fabricated type and, anodised,complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete if fixed to steel/ concrete chowkats with flat iron 40x3 mm size 75 cm long with necessary bolts, etc. complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair mild steel 25 mm tubular rod in pelmet rod, 1.6mm fancy type including golden colour brakets,latto and wall to wall socket etc complete all as specified and as directed by Engineer-In-Charge.

Material and labour for PCC in 1:3:6 type C-1 (using 20mm graded mechanically crushed stone aggregate) 50 mm thick as in plinth protection, path, laid in alternate bays etc.finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Material and labour for cleaning the roof top surface ,brick tile by Wire brushing and cleaning the roof surfaces with water including removing vegetation roots , sweeping clean and washing down with water to remove dust etc and filing of damaged joints tiles in CM1:4 complete all as specified and directed by Engineer-in-Charge.

Material and labour for plain cement concrete,1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) as in roof padding, levelling coarse and top surface finished even and smooth including necessary form work complete all as specified and directed by Engineer-in-Charge.

Material and labour 3mm thick. APP (atactic polyproylene polymer) modified prefabricated five layer weight not less than 3.60 kg/sqm water proofing membrane black finish reinforced with non woven polyster matt and applying on top of it one coat of hot straight run bitumen grade 30/40 (Grade S-35) conforming to IS-73 at the rate of 1.2 kg/sqm, make as approved consisting of a coat bituminous primer @ 0.40 ltr/sqm by the same membrane manufactures of denicity 0.87 to 0.89 kg/ltr at 25'C temprature and viscosity 70-160 cps over the primer coat with overlap of 100mm at the side and 150mm at the end , the layer membrane shall be laid using butane gas torch and sealing all joints etc after preparing the surface complete all as per standered paratice as per manufacture's instructions The vital plysical and chemical parameters of the membrane shall be under:- (i) Joint strenth in longitudinal and transverse direction at 23'c at 650/450 N/ cms2 (ii) Tear strength in longitudinal and transverse direction at 300/250N/5 cms. Softing point of membrane not less then 150'c when tested in according with ASTM (d-5147) (iii) The laying if membrane shall be got down through the authriosed applicator or manufactures of membrane only complete all as specified and directed by Engineer-in-Charge.

Supply and fixing (in repair) partly glazed aluminium alloy anodized (powder-coated) partition (Area of each panel not exceeding 1.5 Sqm each) with frame of size not less than 100 mm x 44.4 mm x 2 mm including packing with rubber gasket, standard aluminium beading around both sides including 6mm thick plain coloured bakelite sheet or acrylic boards, prelaminated both side with one side decorative choice lamination for fixing in bottom panel of aluminium partition as required complete all as specified and directed by Engineer-in-Charge. Notes :- 1. Glass pane shall be measured and paid separately.

Supply and fixing of 5.5 mm thick tinted glass in square exc 0.5 sqm in each pane with heat reflecting properties , fixed to aluminium frame with glazing clips, etc., complete all as specified and directed by Engineer-in-Charge.

[E&M PORTION] Dismantling/taking down carefully aluminium/ copper point wiring (light, fan,socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators , sockets, light fittings etc., removing materials to stores for keeping in safe custody for taking credit and making good the disturbed surfaces of walls,ceilings etc. complete all as specified and directed.

Material and labour for concealed point wiring using approved colour coding as per IS, with multi stranded copper conductor 1.5 sqmm (Nominal area), single core, FRLSH (FIRE Retardant Low Smoke and low Halogen), PVC insulated and unsheathed stranded cable drawn through and including non metallic,medium grade PVC concealed conduit not less than 20mm dia and its fittings including all tees, bell mouth pieces and fixing accessories such as couplers, saddlers, pipe hooks etc, PVC junction boxes with GI metal flush boxes made out of 1.2mm thick of any module from 2 to 18 module confirming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly coated with two coats of anti corrosive paint including modular cover plates with frame i.e. inner and outer plate extended upto 25 mm over metal flush boxes for housing the modular switches, socket outlets, fan regulators etc with brass screws and brass washers and making good the disturbed surfaces as per existing for one light / fan / Bell point contorlled by one switch including 1.5 sqmm single core PVC insulated and unsheathed FRLSH (FIRE Retardant Low Smoke and low Halogen) copper cable, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor upto common earth and connecting to common earth dolly with suitable size of lugs for one light point/ fan point/bell point controlled by one switch complete all as specified and as directed. NOTES:- 1. Switch, socket and fan regulators to be measured and paid for separately. 2. All chases will be cut by chase cutter only.

Description all as per item No 79.00 here in before but for socket out let point 5 Amps on same board complete all as specified and directed.

Description all as per item No 79.00 here in before but for socket out let point 5 Amps on independent board complete all as specified and directed.

Description all as per srl item No 79.00 above but point wiring for one socket out let 15&5 Amps (independent) controlled by one switch with using 2.5 Sq mm (nominal area) stranded copper conductor complete all as specified and directed.

Supply and fix modular switches, one way, 6 amps one module, 230V, 50 Hz supply, complete all as specified and directed.

Supply and fix modular switches, one way, 16Amps, one module, 230 volt , AC supply, complete all as specified and directed.

Supply and fix modular socket outlet 6 amps, 2/3 pin combined 2 module, 230 volt, complete all as specified and directed.

Supply and fix modular socket outlet 6/16 amps,3 pin, 2 module, complete all as specified and directed.

Supply and fix fan regulator step type one module / 2 module, 100w 230 Volts, 50 Hz, AC complete all as specified and directed.

Supply and fix modular switches, bell push, 6 amps one module, 230V, 50 Hz supply, complete all as specified and directed.

Supply and fix modular blanking plate 1 module complete all as specified and directed by Engineer-in-Charge.

Supply and fix ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified and directed by Engineer-in-Charge.

Supply and fix door bell electric ,ding dong /musical type, single phase 230 volts, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed by Engineer-in-Charge.

Supply and fix sheet metal enclosure SP with two pin and earth plug and socket inclduing metal clad top with one single pole MCB 32 Amp complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of LED light fitting 1x20W (lumen efficacy of >100 lm/W) , 220V, AC with aluminium housing with batten type with driver , holder including 20W LED tube light for connecting up with three core flexiable copper conductor cable of suitablae size from celing rose to connector complete all as specified and directed by Engineer-in-Charge.

Supply and fix batten type with surface mounted LED tube light fitting with high efficient diffuser mirror light,aluminium housing in CRCA body suitable and including 10 watt LED tube rod high efficient, AC 220-240 volts, 50 Hz and connecting with copper conductor flexible cable of size 0.50 Sqmm from ceiling rose to connector of the light including disconnecting and taking down old existing light fitting of any description and in any position complete all as specified and directed by Engineer-in-Charge.

Supply and fix bulk head light fitting, 10 watt, energy efficient with lamp 10 watt with provision of 2/3 core PVC copper conductor cable 0.5 Sqmm size from ceiling rose to light fitting complete including disconnecting and taking down old existing light fitting of any description complete all as specified and directed by Engineer-in-Charge.

Supply and fix bracket for security light made up of 25/40/50mm dia suitable for security light, 0.6 metre long GI pipe, light grade, 120 degree bent to required length, fixed to wall with two clamps made of 20 x 3 mm mild steel flat minimum 15cm long, 4 nos 8mm dia bolts with nuts complete all as specified and directed by Engineer-in-Charge.

Supply and fix LED security light luminaire 30 watt , pressure die cast aluminum housing, toughened heat resistant glass, IP66 protection, better optics for uniform distribution with multiplte LEDs having optical grade polycarbonate lens with all accessories internally pre wired and including connecting up with Two core 1.5 sq mm copper conductor cable from connector to ceiling rose to connection of light including disconnecting and taking down old unserviceable security light fitting of any description and in any position complete all as specified and directed by Engineer-in-Charge.

Material and labour for sub main wiring with two single core FRLSH PVC insulated unsheathed copper conductor cable 6sqmm drawn in and including rigid non metallic PVC medium grade 25 mm dia New concealed conduit with accessories on wall or ceiling with one additional PVC insulated , stranded copper conductor FRLSH of 6 sqmm, green colour for earth continuity conductor including taking down old unserviceable sub main wiring and making good the disturbed surface complete all as specified and directed by Engineer-in-Charge. NOTE:-3 run of 6.0 sqmm cable with concealed conduct shall be measured as 1 unit.

Material and labour for sub main wiring with two single core FRLSH PVC insulated unsheathed copper conductor cable 4 sqmm drawn in and including rigid non metallic PVC medium grade 25 mm dia New concealed conduit with accessories on wall or ceiling with one additional PVC insulated , stranded copper conductor FRLSH of 4 sqmm,green colour for earth continuity conductor including taking down old unserviceable sub main wiring and making good the disturbed surface complete all as specified and directed. NOTE:- 3 run of 4.0 sqmm cable with concealed conduct shall be measured as 1 unit.

Supply and fixing in repair sheet metal enclosures vertical distribution board VTPN,(MCCB DB) 4 ways, double door , 415 volts with 200 amps rated bus bar IP 54 protection, with shrouded neutral bar and insulated bus bar and earth link, with and including MCCB 4 pole thermal release type ,125AMPS ,25 KA as incomer and MCB s as out going complete with making suitable size of MS cabinet 1.2 mm thick dully grouted on the wall (flush) with opening arrangement including making connections with suitable size of lugs and making good the disturbed surface matching with existing surface complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair SPN distibution board 8 way, double door, IP 43, as per IS 8623 including 200 Amps fully insulated copper bus bar, insulated neutral bar, earth bar, door earthing, reversible doors, PAN assembly for easy installation and also incoming and outgoing connections with suitable size of lugs/thimbles /gland/gaskets complete all as specified and directed.

Supply and fixing in repair MCB single pole, 240 volts, 50Hz , breaking capacity 10KA, 'B' curve 6 to 32 Amps, complete all as specified and directed.

Supply and fixing in repair MCB single pole, 240 volts, 50Hz , breaking capacity 10KA, 'B' curve 40 to 63 Amps, complete all as specified and directed.

Supply and fixing in repair MCB single pole and neutral 240 volts, 40 to 63 Amps,10KA, 50 Hz, 'B' Series complete all as specified and directed.

Material and labour for earthing with Galvanised Steel earth plate electrode 60cm x 60cm x 6.0 mm thick buried directly in ground vertically at a depth not less than 2.25metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using Galvanised Iron wire 4 mm as earthing lead (upto terminal point) by means of bolts, nuts, check nuts and washers made of galvanised iron and thimbles and protected by light grade 15 mm dia GI pipe connected to main switch board or main control board and GI pipe medium grade 20mm bore for watering and including funnel , wire mesh , RCC pit cover and PCC chamber pit with PCC (1:3:6) type C-2 using 40mm graded stone aggregate, including excavation and earth work in any type of soil , returning , filling in approved soil and disposal of surplus soil to a distance not exceeding 50m all as specified and shown in electrical plate No 3 of SSR 1991(Part-I) Taking out old unserviceable earthing complete all as specified and directed. NOTE : - The rates for earth work, GI protection pipe, funnel, wire wesh, CI cover, etc shall be deemed to be including in quoted rates.

Supply and fixing of plastic body exhaust fan, AC singal phase, 240 volts of size 250 mm sweep with heavy duty, plastic body with louvers connecting up including provision of fixing clamp, nut bolts and cable from ceiling rose or connector to fan,including taking down old unserviceable pastic body exhaust fan complete all as specified and directed. Note: making holes of suitable size in wall including surface finishing as per existing pattern to be included in the unit rate quoted.

NOTE:- Amount of credit of Rs. 51,875.50 for retrieved materials is mentioned in Schedule of Credit Page No 21.00 & 22.00 of tender documents in pdf form which will be deducted offline while acceptance of tender.