Construction of a room to accommodate a CCTV control room at District Court Eluru in West Godavari District

Auguring and boaring of holes in site for piles in loamy and clayey soils like B.C. soil and ordinary soils with our under reamed as per is 2911-1980 as per approved design including all operational incidental laabour charges etc. complete for finished item of work for piles

Double under reaming in side the pile holes including all labour charges etc. complete for the following piles lied for 300 mm dia under reaming Two Nos BUlbs piles

RCC M- 25 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shuttering.

Earth work excavation for BUILDING foundations and depositing on bank for all lifts and with an initial lead of 10mt including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work excluding seigniorage excluding dewatering charges etc as per SS 20B (ApSS 308)

Filling with Sand in trenches, sides of foundations & basement from approved quarry consolidating deposited layer by watering and ramming, including all operational, incidental, labour charges, complete including cost and conveyance of sand / gravel for finished item of work. (APSS No 309 & 310).

PCC (1:4:8) using 40 mm nominal size SS5 gauge HBG metal as per SS108 , machine mixed laid in position in layers not exceeding 15 cm in thickness ,including cost and conveyance of all materials and water from approved sources to work site and all operational, incidental, labour charges such as machine mixing concrete,laying, tamping,curing etc., complete for finished item of work as perSS402

RCC M- 25 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shuttering.for plinth beam

RCC M- 25 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shuttering.for coloumns

RCC M- 25 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shuttering.for lintels

RCC M- 25 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shuttering.for sun shades 600mm wide

RCC M- 25 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shuttering.for roof beams

RCC M- 25 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shuttering.for roof slab 125mm thick

Providing HYSD deformed bars Fe 500 grade of different diameters , cutting and bending to required sizes and shapes, placing in position with cover blocks of approved materials and size , tying firmly with M.S binding wire , forming grills for reinforcement work as per approved designs and drawing to be supplied at the time of execution of work including cost and conveyance of deformed bars , binding wire, cover blocks and all wastages such as overlaps, coupplings, welded joints, chairs, space bars etc., and all operational, incidental, labour charges such as cutting, bending, placing in position, tying etc., complete for finished item of work (payment will be made on the basis of weight fabricated deformed bars only)

Brick masonry 230mm thick in CM (1:6) using 2nd class bricks having crush strength of not less than 35 kg/ sq.cm including cost and conveyance of all materials and water from approved sources to work site and all operational , incidental, labour charges such as scaffolding, mixing mortar ,constructing masonry, lift charges, curing etc., complete for finished item of work as per SS 504 for basement.

Brick masonry 230mm thick in CM (1:6) using 2nd class bricks having crush strength of not less than 35 kg/ sq.cm including cost and conveyance of all materials and water from approved sources to work site and all operational , incidental, labour charges such as scaffolding, mixing mortar ,constructing masonry, lift charges, curing etc., complete for finished item of work as per SS 504 for basement.

Ornamental plastering to ceiling 12 mm thick in two coats with base coat of 8mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, etc., complete for RCC exposed faces for finished item of work. (SS 901,903 & 904)

Plastering 12 mm thick in two coats with base coat of 8 mm thick in CM (1:6) proportion and top coat of 4 mm thick in CM (1:4) proportion with dubara sponge finish including cost, seigniorage and conveyance of all materials and water from approved sources to work site and operational , incidental, labour charges such as mixing mortar , curing etc., complete for finished item of work as per SS 901 and 904

Plastering 20mm thick in two coats for weather exposed exterior walls using screened sand with base coat of 16mm thick in CM(1:6) and top coat of 4mm thick in CM(1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing etc. complete for finished item of work .(SS 901,903 & 904)

Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work

Flooring with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm of 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials.

Providing skirting to internal walls to 15 cm height/risers of steps with ceramic tiles 7.30 mm thick length equal to flooring stones, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials

Flooring with Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials.

Supplying and fixing Gyp Board Suspended regular single layer false ceiling (GS-MFSC-4.1 as per India Gypsum) using 12.5 mm thick Gyp Board conforming to IS 2095 - 1982 fixing to Gyp steel GI perimeter channels of size 20 mm x 27 mm x 30 mm(web) of 0.55 mm thick along the perimeter of ceiling screw fixed to brick work/ partition at 610 mm c/c and suspending the frame work using Intermediate channels (45 mm x 15mm x 15mm x 0.9 mm) from soffit at 1220 mm c/c with ceiling angle (25 mm x 10 mm x 0.55 mm) fixed with GI Cleat and steel expansion fasteners & connecting clip to the ceiling channels (with knurled web of 51.5 mm x 26 mm x 10.5 mm x 0.55 mm) fixed in direction perpendicular to the intermediate channel at 457 mm c/c and fixing the 12.5 mm tapered edge Gypboard with 25 mm drywall screws at 230 mm c/c & jointing and finishing using joint compound and paper tape to have a flush look including filling the tapered & square edges with jointing compound, two coats of drywall topcoat complete for finished item of work as per Idia Gypsum Ltd specification.

Supplying and fixing of 110 MM dia. Single Socket PVC/SWR pipe -6 Kg/sq.cm-Prince/Sudhakar/Kisan/Supreme or any ISI Brand including laying, fixing and commissioning the PVC pipes including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice including cost and conveyance of all materials to site but excluding cost of fixtures, including labour charges, t complete for finished item of work

Providing & applying Birla wallcare/ synthetic plaster putty average 1 to 2 mm thickness over plastered surface to prepare the surface even and smoothly after throughly brushing the surface to remove all dust and remains if any loose powdered material, applying putty and sand papers 180 &320Nos.for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc.complete. for finished item of work for internal walls.

Painting to new walls with 2 coats of polymer luxury plastic emulsion paint of approved brand and shade over a base coat of approved cement primer grade I making making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for internal walls

Painting to new walls in two coats with acrylic emulsion paint exterior grade over a base coat of approved cement primer grade I making making 3 coats in all to give an even shade of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for external walls

Supply and fixing of teak wood Flush Doors of size 3'-6" x 7' with teak wood frame of size 100mmx75mm and shutters of 30mm thick with one side commercial ply and one side veener ply including cost and conveyance of all materials and cost of fixtures such as Hinges,Aldrops,tower bolts,handles etc. and all labour charges for fixing the door &fixtures in position etc. complete for finished item of work.

Painting to new wood work with 2 coats of ready mixed first quality synthetic enamel paint of approved brand and shade over wood primer(Total 3 coats in all) including cost and conveyance of all materials to work site and all operational , incidental, labour charges etc., complete for finished item of work as per SS 1207 & 1212

Providing and fixing factory made UPVC white colour fixed glazedwindows Ventilators comprising of uPVC multichambered frame and mullion (whereever required) extruded profiles duly reinforced with 1.60± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mmsize for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion(ifrequired) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of wateretc. After fixing frame the gap between frame and adjacent finished wall shallbe filled with weather proofsiliconsealant over backer rod of required size and of approved quality, all complete as per approved drawing &direction of Engineer inCharge inclusive of cost of Single doubleglass panes and silicon sealant. Note: For uPVC frame, sash and mullionextruded profiles minus 5%tolerance indimension i.e. in depth & width of profileshall be acceptable. Variation in profile dimension in higher side shall beaccepted but no extra payment on this account shall be made.

Plastering 20mm thick in two coats for weather exposed exterior walls using screened sand with base coat of 16mm thick in CM(1:6) and top coat of 4mm thick in CM(1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing etc. complete for finished item of work .(SS 901,903 & 904)

Ornamental plastering to ceiling 12 mm thick in two coats with base coat of 8mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, etc., complete for RCC exposed faces for finished item of work. (SS 901,903 & 904)

Painting to old walls in two coats with acrylic emulsion paint interior grade of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for external walls

Painting to old walls in two coats with acrylic emulsion paint interior grade of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for internal walls

Painting old wood work in single coat of ready mixed first quality synthetic enamel paint of approved brand and shade including cost and conveyance of all materials to work site and all operational , incidental, labour charges etc., complete for finished item of work as per SS 1207 & 1212

Supplying and fixing Gyp Board Fine Line Grid false ceiling (GS-FLC-4.6 as per India Gypsum) in size 600 mm x 600 mm using 12.5 mm thick thick Gyp Board sheet tiles of size 595 mm x 595 mm or 595 mm x 1195 mm conforming to IS 2095 - 1982 fixing to Gyp steel precoated GI wall angle of size 25 mm x 25 mm x of 0.70 mm thick along the perimeter of ceiling screw fixed to brick work/ partition at 610 mm c/c and suspending the frame work using precoated GI Tee section (24 mm x 38 mm x 0.7 mm) from soffit at 1220 mm c/c fixed with GI Soffit Cleat, rawl plugs and steel expansion fasteners & connecting clip to the GI T section with 4 mm dia GI Rod with galvanised spring steel level clip of PVC unversal holding clips system at 1200 mm c/c and fixing the 12.5 mm / 9.5 mm Gypboard Sheet tiles of size 595 mm x 595 mm or 595 mm x 1195 mm and finishing two coats of drywall topcoat complete for finished item of work as per Idia Gypsum Ltd specification.

Supplying and fixing powder coated aluminium three track sliding window with fixed fan light of 500mm at top as per the approved drawing with all required accessories such as stoppers, bolts, weather stripping etc with top and sides section of window of size 92mm x 31.5mm x 1.50mm thick, sloping outward for for drainage, fixed and sliding shutters with bottom, sides and top section of 40mm x 18mm x 1.50mm thick, interlocking section 40mm x 28mm x 18mm x 1.50mm thick inter locked for weather scaling and mounted on nylon rollers of lift type and fixing 4mm pin headed glass in fan light and for shutters fitted with aluminium glazing clips and SS 20 gauge mesh with shutter frame for bottom, sides and top with section of size 40mm x 18mm x 1.50mm thick, inter locking section 40mm x 28mm x 18mm x 1.50mm thick inter locked for weather scaling and mounted on nylon rollers of lift type fitted with nylon/polymer mesh on rollers/pulley duly fixed with TPV gaskets / EPDM weather seal resistant accessories like locking system 1 No. per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/deglazing at site etc., and fan light top and side section of size 63.50mm x 38.10mm, 1.53mm thick, powder coating of all Aluminium sections 25 microns thick including fixing of 100mm long Aluminium handle to each shutter, cost and conveyance to site of powder coated aluminium sections, glass, rubber beading , fixtures etc., including labour charges for manufacturing window, fixing in position using wooden blocks and sheet metal screws, overheads & contractors profit etc., complete for finished item of work. (The aluminium sections used shall be standard make confirming to IS 1948-1961 and as approved by the Engineer and fixtures shall be of ISI marked) (1200mm x 1800mm)

Supplying and fixing of MS Grill to windows / in open court yards using 25mm x 6mm MS flat alround and 10mm MS square bars horizontally at 125mm centre to centre and vertically at 300mm centre to centre including fixing with 4 Nos of MS Z holdfasts (2 on each side) duly making cutting brick masonry, fixing and making to original surface neatly including cost and conveyance of all materials, cutting, bending, welding, operational charges, labour charges, overheads and contractor profit etc., complete for finished item of work.

Providing and fixing 30mm thick factory made moulded door shutter- wood free consisting of frame made out of MS. tubes 19gauge thickness and size of 25mmX25mm for styles, top and bottom rails. MS. Frame shall have a coat of steel primers. The inner panel shall consist of 25mm thick high density EPS conforming to IS 4671-1984 bounded with 2mm thick termite proof, water proof and fire resistant moulded Pac sheet with 2,4,6 raised panel design in different plain and / or pre-lam colours after routing to the moulded design on one side and 2mm plain and / or pre-lam Pac sheet on other side of the EPS. The edge of panel to be sealed with lipping of 10mm wide PVC sheet bottom (made by sticking 2 rigid foam sheet of 5mm thickness using Pac solvent cement) and stiles sides 25mm(5mmX5) thick and 30mm width Pac sheet fitted along MS tube for lock provision for lock height 5mm thick Pac sheet of size 150mmX100mm fixed with upper and lower face of inner side of EPS panel etc., complete as per direction of Engineer-in-Charge, manufacture specification and drawing including ISI marked Aluminium fixtures 3 Nos. butt hinges (IS:205) of 150mm long, 1 No. aldrop (IS:2681) 250 mm long, 1 No. tower bolt (IS:204) of 150 mm x 10mm dia, 2 Nos. 125mm long handles (IS:208), 1 No. Rubber / Nylon door stop bushes including labour charges for fixing the shutter to frame etc., including overheads & contractors profit complete for finished item of work for door of size 750mm x 2100mm

Providing Mild Steel, Structural Steel, I.e., Angles, Channels and I sections.of different diameters, cutting and fabricating to required sizes and shapes,placing in position as per approved designs and drawings to be supplied at the time of execution of work, including cost and conveyance of all Mild steel sections and all wastages such as overlaps, couplings, welede joints, etc., and all operational, incidental, Labour charges for fabricating steel works like Window Grills, Compound Wall Grills, Iron Doors, Windows including

cost of welding rods, power charges, including cost of welding rods, power charges, including cost of Labour charges for fabricating steel works like Window Grills, Compound Wall Grills, Iron Doors, Windows including cost of welding rods, power charges, etc excluding cost of fixing in position etc. complete for finished item of work.

Providing 110 mm Dia ISI marked PVC (Sudhakar / Nandhini) down water take pipes with Single socket , 4.0kg/sq.cm pressure of ISI marked including cost of necessary PVC clamps and all other accessories and fixing in position including cost and conveyance of all materials, sales & other taxes on materials to site, operational & incidental charges including all labour charges for fixing at site etc., and Overheads & Contractors profit complete for finished item of work. (APSS No. 1328)

Supply and fixing of SS fly proof mesh with teak wood reeper of size 30x12mm size over the existing window frames including cost, conveyance of all materials such as screws, nails etc. and labour charges for fixing in position etc; complete.

Providing Antitermite treatment as per IS 6313 (Part-2) 2013 (Pre-constructional chemical treatment measures) along the internal & external vertical faces of the columns, plinth beams, basement and top surface of the basement filling below flooring bed as per the specified procedure conforming to IS 6313 (Part-2) 2013 and other relevant approved specification & CIB RC registered termiticide which creates a continuous chemical barrier beneath the building which kills or repels terminates & impervious to tremite entry, Imidacloprid 30.5% SC (IS 63131) dissolve 2.1 MI/1 liter of water and apply emulsion/solution @ 7.5 Litres/Square meter (Sqm) of internal, external vertical surface of the colums, plinth beams (Back filling) walls and floor junction, external perimeters, along reatining wall @ 5.0 Liters/Sqm of the horizontal surface of basement top surface of the basement filling below flooring bed (Plinth) & @ 2.0 Litres/Line meter at expansion joints. The substructure of a depth of 500mm around coulmns & 300mm deep around plinth beams, basements & floor filling area including excavation channel along the wall & rodding etc. cost & Conveyance of all materials to the site, cost of labour for sparying, rodding, overheads and contractor profit etc. complete for furnished item of work as per the approval of the Engineer-in-charge

Provisions for engaging 2nd class carpenters

Provisions for engaging Helpers & carpenters

WATER SUPPLY & SANITARY ITEMS Supplying and fixing European Water Closet of 1st quality conforming to 15:2556-Part-2-1973 of Hindustan /Neycer or Parryware make white glazed with 'S' trap, supplying and fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996 and PVC low level system parryware, slimline with internal components & short bend: 10 Ltrs. capacity single flush tank of Parryware or equivalent with internal components and fixed using required size of nails and screws, 15 mm brass angle stop valve of quarter turn spindle type of not less than 400 grams weight with internal threaded conforming to IS 8931 of first quality Indian make heavy duty Seiko/Senior/Nice or equivalent, 15mm PVC connections with brass union nuts CP coated including cost and conveyance of all materials to site, overheads & contractors profit etc., complete for finished item of work for all floors.

Supplying and fixing 580mm x 440mm long Orissa pan white glazed Water Closet 1st quality ISI marked confirming to IS:2556-Part-3-1981 with "P" or "S" trap, ISI marked and providing masonry seat, CC squatting plate and 10 litres capacity single flush PVC low level cistern with internal components fixed on 2 Nos. of teak wood blocks of size 76.20mm x 101.60mm using required size of nails, screws as approved by Engineer-in-charge, angle stop cock 12.70mm dia. first quality Indian make heavy duty, 12.70mm PVC connection with brass union nuts CP coated, 31.75mm brass plumber union, P trap or S trap of Indian W.C. shall be encased on CC (1:2:4) 150mm alround well above the joint to stop leakage at the joint etc.. complete Including cost and conveyance of all materials to site, cost of CC bed, labour charges, overheads & contractors profit etc., complete for finished item of work.

Supplying and fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 of size 550mm x 400mm with 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make heavy duty complete with standard CI brackets including wooden blocks, 1 No. 12.70mm PVC connection with brass union nuts CP coated, angle stop cock 12.70mm dia. first quality Indian make heavy duty, 31.75mm dia. PVC flexible waste pipe 914.4mm length of 1st quality including cost and conveyance of all materials to site, labour charges, overheads & contractors profit for finished item of work

Supplying and fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm x 315 mm with integral flushing rim fixed with screws complete Indian make (HSW/Parry/Neycer) conforming to IS:2556-1995 as approved by Engineer-in-charge, including supply and fixing 12.7mm PVC connection with brass plumber union nuts CP coated, 12.70mm push cock 1st quality of approved make, 31.75 mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work for all floors.

Supplying and laying, filling, jointing and testing SWG SP-1 pipe conforming to ISI 651 & 4127 with air light Cement joints in CM (1.5:1) prop, including excavation of trenches and socket pits in any soil (except rock requiring blasting) and refilling with watering and tamping to the required slope including cost and conveyance of all materials to site and all labour charges, overheads & contractor profit etc, complete for finished item of work (APSS NO 1301 & 1318)

Constructing 457.2 mm x 457.2 mm (1'6"x16") brick in CM 1.6 prop. Masonry Inspection chamber upto 914.4 mm (30") and fitted with light weight 457.2 mm x 457.2 mm (1'6"x16") CI frame and cover of 20 Kg including cost and conveyance of all materials like cement, sand, bricks, water etc., to site and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing, overheads & contractors profit etc., complete for finished item of work as per Standard specification.

Supplying and fixing of SWR PVC pipes (Prince/Sudhakar/Kisan/Supreme or any ISI brand) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work at all floor levels (APSS No. 1302 1319 & 1326) 75mm dia

Supplying and fixing of SWR PVC pipes (Prince/Sudhakar/Kisan/Supreme or any ISI brand) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work at all floor levels (APSS No. 1302 1319 & 1326) 90mm dia

Supplying and fixing of SWR PVC pipes (Prince/Sudhakar/Kisan/Supreme or any ISI brand) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work at all floor levels (APSS No. 1302 1319 & 1326) 110mm dia

Supply and fixing of Ashirvad/Ajay/Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 11 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels.15.90mmOD P[ipe

Supply and fixing of Ashirvad/Ajay/Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 11 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels.22.20mmOD P[ipe

Supply and fixing of Ashirvad/Ajay/Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 11 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels.28.60mmOD P[ipe

Supplying and fixing Gunmetal Gate (GM peet) valve as per IS-778 Class-1. Indian make heavy type including cost and conveyance of all materials, labour charges, overheads & contractors profit complete for finished item of work.15mm nominal bore

Supplying and fixing Gunmetal Gate (GM peet) valve as per IS-778 Class-1. Indian make heavy type including cost and conveyance of all materials, labour charges, overheads & contractors profit complete for finished item of work.20mm nominal bore

Supplying and fixing Gunmetal Gate (GM peet) valve as per IS-778 Class-1. Indian make heavy type including cost and conveyance of all materials, labour charges, overheads & contractors profit complete for finished item of work.25mm nominal bore

Providing and placing on terrace (at all floor levels polyetheylene water storage tank with double layer approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet and outlets and over flow pipes but without fittings and base support for tanks including cost and conveyance of all materials and labour charges, overheads & contractors profit complete for finished item of work

Supplying and fixing NP bib taps of size 12.70mm dia of Indian make heavy duty (short body) as approved by the Engineer-In-Charge including cost and conveyance of all materials, labour charges, overheads & contractors profit complete for finished item of work in all floors.

Supplying and fixing NP bib taps of size 12.70mm dia of Indian make heavy duty (long body) as approved by the Engineer-In-Charge including cost and conveyance of all materials, labour charges, overheads & contractors profit complete for finished item of work in all floors.

Supplying and fixing NP soap dish heavy type of approved make ISI quality with NP screws etc., complete including cost and conveyance of all materials, labour charges for fixing, overheads & contractors profit for finished itern of work in all floors

Supplying and fixing TV shape mirror with plastic frame of size 609.6mm x 457.2mm plywood back with NP screws 1st quality including cost and conveyance of all materials, labour charges, overheads & contractors profit for finished item of work in all floors.

Supplying and fixing of 25.4mm dia, 609.6mm long aluminium anodized towel rods with brackets and aluminium screws including cost and conveyance of all materials, labour charges, overheads & contractors profit for finished item of work.