MAINT AND MISC CIVIL REPAIR WORK AND PERIODICAL SERVICES TO MD AND OTM ACCN AT HALLOMAJRA AND OTM ACCN AT SECTOR 28/29D UNDER GE CHANDIGARH

Amount

Preparation of old decorated surfaces of walls including brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts including cornices etc and applying one coat of white wash complete all as specified & as directed.

All as per above Srl item No 1 but on ceiling.

Preparation of old decorated plastered surfaces of walls by rubbing down,washing,& stopping of distempered and painted surfaces and applying one coat of oil bound distemper (Ist quality) complete all as specified.

M&L Complete removal of existing treatment of plastered surfaces wall and applying two coats of oil bound distermper (Ist quality) , white or colour over a coat of chalk whitening primer complete all as specified.

Preparation of old decorated surfaces of walls including brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts including cornices etc and applying one coat of cement base paint complete all as specified.

M&L Complete removal of existing treatment of plastered surfaces wall and applying two coats of exterior grade acrylic emulsion paint over a coat of alkali resistant primer to any hight complete all as specified.

M&L preparation of old wooden surface and applying one coat of synthetic enamel paint , any description over 10 cm in width or girth not otherwise described complete all as specified and directed.

M&L preparation of old painted surfaces of steel over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified.

Demolition of Brick work built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stone work and precast concrete articles complete as specified and directed.

Brick work with sub class 'B' bricks of class designation 10 , straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete as specified and directed.

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete as specified and directed

Rendering 5mm thick on ceiling, in cement mortar 1:3 finishing the surface even and smooth without using extra cement complete all as specified

Rendering 15mm thick in cement mortar 1:6 on brick work or concrete surface, finishing the surface even and smooth without using extra cement complete all as specified

Rendering 15mm thick in cement mortar 1:4 on brick work or concrete surface, finishing the surface even and smooth without using extra cement complete all as specified

M&L for preparing newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified.

Preparing newly plastered wall surfaces and applying applying two coats of oil bound distermper, white or colour over and including a coat of chalk whitening primer the floor / joinery, surfaces, glass panes complete all as specified.

Preparing newly plastered wall surfaces and applying three coats of white wash complete all as specified.

Preparing newly plastered wall surfaces and applying two coats of cement base paint, white or colour over a coat of alkali resistant primer complete all as specified.

M&L of preparation of newly plastered surface of walls and applying two coats of exterior grade acrylic emulsion paint 1st quality over a coat of alkali resistant primer complete all as specified.

M&L for applying wall care putty 1-2 mm thick on wall/ceiling surfaces & smoothening the surfaces with sand papers etc., (preparatory to OBD/ plastic emulsion/ interior/ exterior emulsion paint as directed) complete all as specified.

Re-Writing letters or figures (Block. Roman, Italic or Indian) n exc. 30 cm high

M&L for repairing the edges of concrete chajjas, facias, slabs, columns and the like by providing PCC (1:2:4) type B0 incl all necessary form work and or provn of rendering 15mm th(average thickness) in cement mortar 1:3 , after applying a coat of cement slurry @ 3 kg/sqm of surface, finished even and fair, surface area not exc 300 mm wide in patches incl taking down swoolen/damaged plaster of concrete complete all as specified

M&L taking out roots of trees penetrated through valves/concrete surfaces etc upto a depth of 600mm by chieseling , demolition of brick work , concrete work and pouring concentrated acids/Dr fixit chemicals upto the depth of roots and making good the disturbed portion.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) including removing of debris out side MoD land complete all as specified and directed

M&L 75mm thick Plain cement concrete 1:4:8, type D-2, using 40mm graded crushed stone aggregate as in sub base under floor/path all as specified and directed.

M&L 25 mm thick Plain cement concrete 1:2:4 Type B0 (12.5mm graded aggregate) as in flooring, surfaces finished even and fair complete all as specified and directed.

Providing, cement concrete PCC 1:2:4 type B-1 (using 20mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

S&F 500 ltr capacity rotational moulded polyethylene water storage tanks double layered ISI marked (Cylinderical vertical with closed top) and fixed in position, all as specified in SSR Part-I, including dismantling of old water tank of any description, complete all as specified and directed.

S&F 1000 ltr capacity rotational moulded polyethylene water storage tanksdouble layered ISI marked (Cylinderical vertical with closed top) and fixed in position, all as specified in SSR Part-I, including dismantling of old water tank of any description, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM (1:4) complete all as specified and directed.

M&L Glazed ceramic coloured tiles 350x 250x 7 / 450X 350X 7mm thick, as in vertical surfaces such as in skirting and dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 10mm thick back coat in CM (1:4),complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specially provided for (reinforcement cut as required to facilitate demolition) including removing of debris out side MoD land complete all as specified and directed

M&L Providing precast cement concrete in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs,mangers, shelves and similar articles with plain faces B-1, 1:2:4 (using 20mm graded crushed stone aggregate) in CM 1:4 complete all as specified and directed

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors,aprons etc laid ,bedded and pointed in any mortar complete all as specified and directed.

S&F 18 to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar works complete all as specified

Taking up or down steel tubing 15mm bore and connections, including cleaning for refixing or removal to store

Refixing of old steel tubing of 15mm bore including all fittings to walls, ceiling and laiding floors

S&F 15mm bore medium grade tubes, glvanized with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed

Taking up or down steel tubing 20mm bore and connections, including cleaning for refixing or removal to store

Refixing of old steel tubing of 20mm bore including all fittings to walls, ceiling and laiding floors all as directed

S&F 20mm bore medium grade tubes, glvanized with all fittings anf fixed complete to walls and ceilings or laid in floors complete all as specified and directed

S&F in repairs 15 mm bore globe or gate valves of gun metal with iron wheel head screwed both ends for iron pipe and fixed

S&F in repairs 20 mm bore globe or gate valves of gun metal with iron wheel head screwed both ends for iron pipe and fixed

M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth on Brick wall complete all as specified

S&F in repairs 15mm bore bib taps, cast copper alloy chromium plated fancy type (ISI marked) with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified and directed.

S&F in repairs 15mm bore stop/Angle valve, chromium plated fancy type cast copper alloy, screwed down high pressure, with crutch or butter fly handle, screwed both ends for iron pipes or for unions and fixed of,complete all as specified and directed.

S&F in repairs 15mm bore Pillar taps bore cast copper alloy, with capstan heads,chromium plated fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe, complete all as specified and directed.

S&F in repairs 15mm Stop valve, cast copper alloy (fancy type) chromium plated with long shank and cup (concealed type) screwed down high pressure, screwed both ends for iron pipe or for unions,and fixed of 15mm bore complete all as specified and directed.

S&F fixed in repairs 15mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 142gms) complete all as specified and directed.

S&F fixed in repairs 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 210gms) complete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nuts of length 600mm,complete all as specified and directed.

M&L in repairs b rass chromium plated shower rose 125mm size with or without swivel joints with shower arm 15mm size, 195 mm long with bend of 45 degree with flange, including fixing to steel pipe or union complete all as directed.

S&F in repairs tubular towel rail, brass chromium plated 20mm dia D type, 60cm long between flanges, complete all as specified and directed.

S&F in repairs Vitreous China squatting pan of 'Orissa' pattern of size 580 x 440mm, white, with integral foot rests, with ‘P’ or‘S” trap complete including provision of lime concrete bedding all as directed.concrete bedding all as directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern) white(excluding flushing cistern and flush pipe) including connection to drain or out going pipe and flush pipe anti symphonize pipe etc complete all as specified and as directed.

S&F in repairs 10 ltr capacity PVC valveless symphonic action type flushing cistern low level white with inlet ball valve, float and handle/push including brackets and PVC flushing pipe 32mm bore, complete all as specified.

S&F in repairs Vitreous China wash Basin (flat back or angle back type) , of size 550x400mm including brackets, waste coupling PTMT, and waste pipe PVC 32mm dia including cutting for and pinning in ends of brackets or erecting stand etc, complete all as specified.

S&F in repairs PVC waste pipe 32mm bore all as specified

S&F in repairs 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement, all as specified and directed.

S&F in repairs Grating doom 100mm dia of PTMT (Minimum weight 25gms) all as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls all as directed.ory complition of work all as directed.

S & F 110mm bore PVC (SWR) bends any radius all as directed.

S&F PVC (SWR) pipe 75 mm bore, single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends any radius, complete all as specified and directed.

Taking down chowkats or frames area not exc 1.5 Sqm each with shutters (without taking off shutters from the frames), complete all as specified and directed.

Taking down chowkats or frames area exc 1.5 Sqm and not exc. 4 Sqm each with shutters (without taking off shutters from the frames), complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm and not exc. 2 Sqm each, complete all as specified and directed.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification

S&F Factory made soild PVC profiled panel door shutter 28mm thick withintegral skin as frame & 3mm thick high pressure compact laminate on both side of approved colour as , with 'C type Gl or 40 x 20 x19 of MS pipe as stiffner & supplying & fixing in frame at site complete, all as specified and directed.

M&L Pressed steel frames 105 x 60mm for doors with one or more rebates made out of 1.25mm thick steel sheet including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed

M&L pressed steel frames 125 x 60mm for doors with one or more rebates made out of 1.25mm thick steel sheet including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed

S&F 35mm thick 2nd class hard wood (Kail) Plain, framed,panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete, all as specified and directed.

S&F 35mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc,(without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, cut and mitred beads for securing glass etc size of members of shutters as spd in SSR part I, section 8.

S&F Anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc with powder coating (min thickness 50 micron). complete all as specified

S&F Anodised aluminium door shutters,aluminium section including necessary joining cleats,glazing clips, ruber neoprene packing, handles 2 Nos in each door, 01 No Tower Bolt, hinges,anodised aluminum snap beading screws etc with powder coating (min thickness 50 micron) complete all as specified.

S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section including necessary joining cleats, glazing clips, rubber packing, handles 2 Nos, 02 Nos Tower Bolt, anodised aluminium snap beading, screws etc with powder coating (min thickness 50 micron) complete all as specified. complete all as specified

S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar workon- forming to Fe.290.Gde-E-165

S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed

S&F in repairs Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as directed.

S&F in repair 4mm thick sheet glass ordinary quality not exc 0.50Sqm in each pane fixed with oil putty complete all as specified .

S&F 3 mm thick Figured glass, pin head type and glazing with oil putty in squares not exc 0.5 sq.m in each pane complete all as directed.

S&F 5.5mm thick Sheet glass,ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane complete all as specified and as directed.

S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified

S&F Aluminium (Dicast) body Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and complete all as specified and directed.

S&F in repairs Aluminium (Dicast) body Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters n.exc 700 mm in width and of weight not more then 35 kg and complete all as specified and directed.

S&F Aluminium rebated Mortice Lock vertical type size 100mm 04 Lever .

S&F in repair Aluminium rebated Mortice Lock vertical type size 100mm 04 Lever

S&F 200 mm long aluminium anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed.

S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S&F 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as specified and directed.

S&F 150mm long Aluminium handles, cast type, anodised, all as specified and directed.

S&L in repairs Steel curtain rod (Fancy Type) of 20 mm dia including powder coted brackets and finials, curtain rings and fancy finials with rawal plug and steel screws complete all as specified

Dismantling of Asbestos cement (corrugated, semi-corrugated, etc.) sheets in roof coverings, complete all as specified

S&F 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc. ISI marked.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240

M&L for preparation of steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M&L PCC type C-0, 1:3:6 using 12.5 mm graded stone aggregates as filling of MS steel sheet chowkats, complete all as specified.

S&F in repair 300 long ordinary rat tail rod pattern springs including roller and roller plate including fixed to stone/concrete/ steel chowkhat with flat iron 40x3mm size 75 cm ling with necessary bolts/welding where required etc complete all as specified.

S&F Door stopper 140 mm Floor door stopper of aluminium alloy body and tongue, anodised,with hard drawn steel spring, fixed in floor complete all as specified and as directed.

S&F 100 mm Hasp and staple, safety type, aluminium anodised hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.

M&L for framed work as in doors or gates of angle of any section with gusset plates, rails, braces etc. complete drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and incl either hooks and hinges or steel hanging door fittngs (exclussive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete all as specified.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width tuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of lain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

Material and Labour for Box type steel window/ventilator made of ERW tube P- section of size 60 mm x 25 mm single rebated outer frame, comprises glazed Skelton of ERW tube P-Section size 50mm x 20mm with one/two Nos open able leaf consisting of two Nos Sash bar of T-section 20 x 3 mm welded to frame with one No vertical mullion of ERW box type T Section of size 60mm x 25mm and FI 2mm thick welded/screwed to frame for fixing of glass/wire mesh including fittings and fixture like as Handle, Tower Bolt, Stopper, Cleat, Pintal hinges, holdfast etc complete including cutting holes, making good dismantled portion in PCC 1:2:4 type B-1, all as specified and directed. (a) Hold fat 150 mm long of 12 mm x 3 mm MS flat - 04 Nos per window (b) Handle of Z section 20 mm x 25 mm , 100 mm long - 01 No per leaf (d) Z Section stopper 20 mm x 25 mm , 100 mm long - 01 Nos per leaf (e) Cleat 55 mm long of hollow square 15 mm x 12 mm - 02 Nos per leaf (f) MS pintol hinges size 75 mm x 12 mm -02 Nos per leaf Note : MS guard bars, sheets glass wire mesh and painting shall be measured and paid separately

All as per item No 113 above but without glazing bar complete all as specified and directed.

M&L for preparing new untreated steel or iron surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over shop coat of primer, all as specified and directed by Engr-in-Charge.Make: Asian/Narolac/ Berger

S&F aluminium door stoper 150mm( or any other size as reuired) with rubber bottom suitable for fixing to toughened glass doors complete all as specified.Make :Link/ crown/Harrison

M&L for Virified ceramic tiles 8-9 mm thick in light/dark shade( square/ rectangular) polished, area of each tiles exc 0.18 sqm, but not exceeding 0.38 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including screed bed or bedding layer of 15mm thick in CM (1:4) , complete all as specified and directed .

M&L for machine cut kota stone slab 18 to 20mm thick over and including 15mm thick cement screed base in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, grinding, rubbing and mirror polishing as in floors complete all as specified and as directed.

Kota stone slab 18 to 20mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with neat cement slurry over 10mm thick rendering of cement sand mortar (1:4) and pointed with coloured cement to match with shad and color including cutting , grianding, rubing and mirror polishing complete all as specified and as directed by Engineer-in-Charge.

M&L providing, 50 mm thick cement concrete type C2 1:3:6 (40mm graded aggregate) as in floor finishes/ plinth protection finished even and smooth w/o using extra cement complete all as specified and as directed.

M&L Chequered cement concrete tiles 30cmx30cmx25cm thick with grey cement and pigment, over and including 15 mm thick screed in CM 1:6 set jointed and pointed in neat cement slurry in floors complete all as specified and as directed.

S&F in repairs Steel rolling shutters with 1.25mm thick laths, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer;erected in position as indicated, complete gear operated type with bevel gear box and crank handle complete all as specified and as directed.

M&L for reinforced cement concrete 1:2:4 type B0(12.5mm graded aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including necessary formwork as required

S & F in repair stainless steel sink, 1.00mm thick for kitchen overall size 495mm x 420mm with bowl size 410mm x330mm x 160mm including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets, waste coupling, PVC waste pipe, washers, connecting union etc complete all as specified and directed.

S&F in repairs Grating doom 125mm dia of PTMT (Minimum weight 40gms) all as directed.

S & F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S&F in repairs PVC plastic water closet seat cover (white coloured) closed pattern with flat bottom, cover and mild steel chromium plated or aluminium hinges device for pedestal pan complete all as specified and as directed.

S&F in repair 110mm PVC(SWR)'' P''/''S'' Trap complete all as specified and as directed.

Dismantling of cast iron pipes 75/100 mm fixed in any position complete all as specified and directed .

S&F cast iron 100mm bore waste or vent sand cast pipes as in any length with or without ears with cement joints (1:2) fixed to wall or laid in floor in complete all as specified and directed .

S&F cast iron 75mm bore waste or vent sand cast pipes as in any length with or without ears with cement joints (1:2) fixed to wall or laid in floor in complete all as specified and directed .

Dismantling water tanks Exc 250 & n.exc 500 ltr complete all as specified.

S&F PVC water storage tank covers for capacity 500-1000 Ltrs.complete all as specified and directed.

S&F in repairs Chromium plated brass Toilet paper holder complete all as specified.

S&F in repairs Chromium plated brass Jet spray with tube 1.5 mtr complete all as specified.

S&F in repairs 20mm bore dia ball brass valves, high pressure,with polythene float and flynut comp, screwed for iron pipe or brass ferrule and fixed complete all as specified.

S&F for gate and shutter, hooks and magic eyes 75mm for aluminium plate type II fixed in repair complete all as specified and as directed.

S&F in repairs Brass CP mixer(centre holes) for mixing hot and cold water screwed down for iron pipe and fixed (15 mm bore dia of pipe) complete all as specified and as directed.

S&F in repair PVC corner shelf, one set comprises of three pieces of corner shelf fancy type (250 x 250mm, 200 x 200mm, 150 x 150mm) with PVC rawal plugs and steel screwes , complete all as specified.

All as per item No 10 here in before but except bricks complete all as specified.

M&L for preparation old decorated surfaces of walls incl plasters and comices etc and applying two coats of white wash complete all as specified.

M&L for preparation old decorated surfaces incl plasters and comices etc and applying one coat of white wash as on ceiling complete all as specified.

M&L for preparation of old decorated plastered or unplastered surfaces of walls by brooming or by steel wire brushing, scrapping down snow soot,moulds, moss and efflorescent salts and treading oil and greasy spots and applying two coat of cement base paint complete all as specified

M&L for preparation of old decorated plastered or unplastered surfaces of walls by brooming or by steel wire brushing, scrapping down snow soot,moulds, moss and efflorescent salts and treading oil and greasy spots and applying two coats of oil bond distemper complete all as specified

M&L for preparation of old decorated plastered or unplastered surfaces of walls by brooming or by steel wire brushing, scrapping down snow soot,moulds, moss and efflorescent salts and treading oil and greasy spots and applying two coats of oil bond distemper over a coat of alkali resistant paint after complet removel of exesting treatment complete all as specified

M&L for preparation of old decorated plastered or unplastered surfaces of walls and efflorescent salts and treading oil and greasy spots and applying one coats of exteior emulsion paint complete all as specified

M&L for 20-22mm thick cement plaster with cement sand mortar (1:3) on fair faces of brick or concrete roof surfaces finished even & smooth without using extra cement including WPC complete all as specified and as directed.

M&L preparation of newly plastered sufaces of walls and applying two coats of oil bond distemper complete all as specified.

M&L preparation of newly plastered sufaces of walls and applying two coats of cement base paint complete all as specified.

M&L for applying two coats of exterior emulsion paint on walls incl preparation of new plaster surfaces of wall and applying to coat of exterior emulsion paint complete all as specified

Cutting of trees of any description, any size, in any situation / location i.e. walls, roofs, etc. from buildings including removal of roots and applying root killer chemical as approved as per manufacturer's instructions and making good disturbed surface in PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) finished in cement mortar 1:3 and finished the surface as per existing surface complete all as specified.

M&L for pre cast cement concrete 1:2:4 type B-O using 12.5mm graded aggregate as in louvers and Jallies, 40mm thick (measured solid) including all mouldings, set in cement mortar 1:4 complete all as specified and as directed.

Refixing shutters after easing, adjusting, refixing of builders hardware and renewal of unservicable screws in the same opening

S & F in repair 19mm particle board one side prelaminated Particle board and other side balancing white/any colour lamination, with and including 5 to 10mm thick beading, exterior grade, medium density, flat pressed single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work, in cup board shutters/ shelves and kitchen cabinets all as specified & directed

M/S MATLOOB AHMED

OJHA ENTERPRISES

DHIMAN AND SONS