GENERALUrgent SR to PWD Rest house Kaduthuruthy

Amount

Special repairs and maintenance

50.9.15.2:Supplying and fixing 300 mm Aluminium aldrop

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

14.31.3:Providing and fixing bright finished brass single acting spring hinges with necessary brass screws etc. complete:100 mm

18.56.1:Providing and fixing PTMT pillar cock of approved quality and colour.15 mm nominal bore, 107 mm long, weighing not less than 110 gms

OD31967/2023-2024:Engaging labour for plumbing works

OD32008/2023-2024:Engaging coolie

OD32466/2023-2024:Providing and fitting curtain using good quality cloth ( S.S rod to be measured separately).Including all labour and material charges etc. complete.

OD34604/2023-2024:Providing queen size ,cotton bed sheet, with 2 pillow covers and 2 pillows

OD34605/2023-2024:Queen size Teak wood cot

16.83:Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.

OD62294/2023-2024:Laying old cement concrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of 6 mm metal, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost.)

12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

50.17.1.5:Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.

OD34606/2023-2024:Standard Toilet seat cover white( set of 1) , with Plastic

OD36464/2023-2024:Providing and fixing 0.8mm thick Aluminium Sheet on tiled roof using with nails including 150mm over laps, all cutting charges, all labour charges, all conveyance, all leads and lifts etc. complete as per the Directions of Engineers at site. Details for 1.0m2 - 1.1 5 x 0.810kg/m2=0.932kg

13.52.1:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work

OD63210/2023-2024:Mattress made with poly form ,15 cm thickness and cotton fabric cover

JACOB GEORGE

Bidder Name

JACOB GEORGE

RENJITH K.S.