REPAIR AND MAINT OF VARIOUS TYPES OF WOODEN AND STEEL FURNITURE AT AFS JODHPUR

Amount

ALMIRAH LARGE STEEL WITH SHELVES, ALMIRAH STEEL 1/2 HANGING 1/2 SHELVES( FD-1031 & 1033) Removing UNSV shelves from almirah Large steel & S & F new shelves made out of 1mm thick plain sheet fixed with appropriate clamps/screws/ nuts & bolts complete all as specified and directed by Engr -in- Charge.

Removing UNSV locks from almirah & S & F new 6 levers locks, Godrej pattern, with duplicate and key & hole cover and all as specified and directed by Engr -in- Charge. (Make of Lock -HARRISON/GODREJ/LINK or Equivalent

Removing UNSV handle & S & F new steel anodized handles Godrej pattern with suitable bolts and all as specified and directed by Engr-in-Charge.Make-GODREJ/HARRISON or Equivalent.

Removing UNSV locking assembly & S & F new locking assembly with cover complete all as specified and directed by Engr -in-Charge.

M & L for denting & painting of Almirah large steel both internally and externally with synthetic enameled paint of silver/ grey colour with spray gun after properly smoothening the steel surface with the help of Sand paper/ electric grinder,applying putty on dents and providing a coat of primer complete all as specified and directed by Engineer-in-Charge.Make of Paint:-Berger/Asian paint/Jonson and Nicholson Paints.

ALMIRAH MEDIUM STEEL W/SHELVES : FD-1032 Removing UNSV shelves from almirah Medium steel & S & F new shelves made out of 1mm thick plain sheet fixed with appropriate clamps/screws/ nuts bolts complete all as specified and directed by Engr -in- Charge.

Removing UNSV locks from almirah & S & F new 6 levers locks, Godrej pattern , with duplicate key & hole cover and all as specified and directed by Engr -in- Charge. Make of lock -HARRISON/GODREJ/LINK or Equivalent

Removing UNSV handle & S & F new steel anodized handles Godrej pattern with suitable bolts and all as specified and directed by Engr-in-Charge. Make -GODREJ/HARRISON or Equivalent

Removing UNSV locking assembly & S & F new locking assembly with cover complete all as specified and directed by Engr -in-Charge.

M & L for denting & painting of Almirah Medium steel both internally and externally with synthetic enameled paint of silver/ grey colour with spray gun after properly smoothening the steel surface with the help of Sand paper/ electric grinder,applying putty on dents and providing a coat of primer complete all as specified and directed by Engineer-in-Charge. Make of Paint:-Berger/Asian paint/Jonson and Nicholson Paints.

Repair of Bed Hard (MAP) M & L for removing old underviceable Ply wood top from Bed hard (MAP) and S & F new plywood top 12mm thick BWR Gde type 'AA' of size 1900x850mm with suitable nut & bolt and all as specified and directed by Engr-in-Charge.Make of plywood -Greenply/Kitply/Century ply or Equivalent

M&L for removing old unserviceable particle board from head board and foot board of Bed hard (MAP) and S&F new 18mm thick boath side laminated particle board exterior grade of size 640x200mm for head board & 640x310mm for foot board fixing with suitable steel screw and all as specified and directed by Engr-in-Charge Make of plywood -CENTURYPLY/ACTION TESA/BHUTAN BOARD

M &L for preparation of steel surfaces by emery papers to Bed Hard (MAP) and applying one coat of synthetic enamel paint black colour apporved make and all as specified and as directed by Engr-in-Charge.Make of paint - Berger/Asian/Johnson

M & L for welding to the broken long rail stiffiner and leg stiffiner existing Bed Hard (MAP) with suitable welding rod all as specified and directed by Engr-in-Charge.

TABLE OFFICE CLERK STEEL : FD-1004 & 84 Removing UNSV top & S&F new top made out of prelaminated particle board 18mm thick exterior gde as approved shade and 6mm thick first class teakwood edging fixed with all around the top & edging polishing with matching the colour of top complete all as specified and directed by Engr-in-Charge.Make of particle bord : Centuryply/Action Tesa/Bhutan Board

Removing UNSV & S&F new drawers made out of 1mm thick plain sheet shape and size all as per drg complete as specifed and directed, by Engr.in.Charge.

Removing UNSV locks from & S & F new 6 levers locks, Godrej pattern , with duplicate and key & hole cover and all as specified and directed by Engr -in- Charge. Make of Lock : HARRISON/GODREJ/LINK

M & L for denting & painting of Table office clk steel to external surfaces and drawer & drawer cabinet to external & internal surfaces with synthetic enameled paint of silver/ grey colour with spray gun after properly smoothening the steel surface with the help of Sand paper/ electric grinder,applying putty on dents and providing a coat of primer complete all as specified and directed by Engineer-in-Charge. Make of Paint:-Berger/Asian paint/Jonson and Nicholson Paints.

Removing UNSV & S&F best quality hard rubber shoes to legs complete all as specified and directed by Engineer-in-Charge.

TABLE OFFICE OFFICER STEEL : FD-1003 & 84 Removing UNSV top & S&F new top made out of prelaminated particle board 18mm thick exterior gde as approved shade and 6mm thick first class teakwood edging fixed with all around the top & edging polishing with matching the colour of top complete all as specified and directed by Engr-in-Charge. Make of partical board : Centuryply/Action Tesa/Eco Board

Removing UNSV & S&F new drawers made out of 1mm thick plain sheet shape and size all as per drg complete as specifed and directed, by Engr.in.Charge.

Removing UNSV locks from & S & F new 6 levers locks, Godrej pattern, with duplicate and key & hole cover and all as specified and directed by Engr -in- Charge. Make of lock : HARRISON/GODREJ/LINK

M & L for denting & painting of Table office clk steel to external surfaces and drawer & drawer cabinet to external & internal surfaces with synthetic enameled paint of silver/ grey colour with spray gun after properly smoothening the steel surface with the help of Sand paper/ electric grinder,applying putty on dents and providing a coat of primer complete all as specified and directed by Engineer-in-Charge. Make of Paint:-Berger/Asian paint/Jonson and Nicholson Paints.

Removing UNSV & S&F best quality hard rubber shoes to legs complete all as specified and directed by Engineer-in-Charge.

TABLE 3'X2' (900 X 600 X 760MM) WITH DRAWER/WITOUT DRAWER (FD-1007/1008) Repair of table with or w/o drawer replacement of unserviceable top with commercial particle board 19mm thick as per Drg of Make of ISI Marked with Ist class HW teak wood beading 6mm thick including polishing (two or more coats over a coat of wood filler etc)complete all as shown on drawing and as directed by Engineer-in-Charge.Make of pre-laminated particle board : CENTURY PLY/ACTION TESA/ BHUTAN BOARD

All as per Item No. 6.01 here-in-before but replacement of new aluminium anodized 35mm/ 40mm dia knob complete all as shown on drawing and as directed by Engineer-in-Charge.

All as per Item No. 6.01 here-in-before but replacement of rubber shoes with S & F new rubber shoe of superior quality with steel plated screws of suitable size complete all as directed by Engineer-in-Charge.

Supply and fixing in repair new legs made out with Ist class hard wood as per existing or as per Drg polishing with French polish (two or more coats) over a coat of wood filler after preparation of surface etc.all as specified & directed by the Engineer-in-Charge.

REPAIR OF CHARPOY GI PIPE FD-220 Removing old unserviceable nylon newar from charpoy GI pipe and S & F 12mm thick BWR Gde plywood commercial type of size 1980x900mm to charpoy GI pipe frame by providing 03 Nos of flat Iron at equal distance size 40mm wide X 6mm thick and length shall be provided by existing charpoy GI and flat Iron shall be fixedt tightly to Chapoy GI with the help of suitable nut,bolt & washer of size 62-65 mm & 6 mm dia by drilling holes into GI Pipe alongwith any welding if required . The plywood shall be fixed on the charpoy by drilling 16 Nos holes (03 Nos on each long rail, 2 Nos on each Short rail & 2 nos on each iron flat) & fixing with nut bolt along with suitable washers of size 62-65mm and 6mm thick and all as specified and directed by Engineer-in-Charge.

M&L for removing unserviceable three way elbow 32 mm dia and S & F new three way elbow 32 mm dia medium grade (ISI marked) and all as shown on drg.

M&L for removing unserviceable check nuts of 32 mm dia and S & F new check nuts 32mm dia 6mm thick of best quality and all as shown on drg.

M&L for removing the threadless/broken long rails from charpoy GI Pipe 32 mm dia and supply and fix new long rail made of 32 mm dia GI Pipe medium grade 1.88 mtr long threaded at both ends and fix to existing three way elbow 32 mm dia and all as shown on drg.

Taking out existing old broken short rail from Charpoy GI 32mm dia and providing in 2 Nos short rails made out of old broken long rails obtained from taking down above item No. 7.04 including threading on both ends complete fixing all as specified and shown on drg. Note: U/s check nuts to be replaced in above items & measured and paid as supply only under relevent items.

Taking out existing old broken legs from Charpoy GI 32mm dia and providing in 1 Nos new legs in position made out of old broken short rails obtained from taking down above item No. 7.05 and S&F 3mm thick 40mm dia MS plate welded at bottom of leg and including threading on top portion end complete all as specified and directed .

M&L for removing the old unserviceable Nylon Newar from charpoy GI Pipe 32 mm dia and Supply & reweaving with white colour new nylon newar 50 to 55mm wide closely double knitted and complete all as specified and directed by Engr -in- Charge. (Weight of nylon newar shall not be less than 1.50 Kgs per charpoy).

M & L Welding to the dislocated iron flats of charpoy GI pipe earlier converted to Plywood top to the long / short rails

M & L for removing old unserviceable plywood /MDF board top from the Charpoy GI pipe and S & F with new 12mm thick BWR Gde plywood commercial type of size 1980x900mm and all as directed. Make of plywood : Greenply/Kitply/Century ply

CHAIR COMPUTER, CHAIR REVOLVING, EXECUTIVE (HIGH)/LOW BACK), CHAIR REVOLVING WITH & W/O ARMS TP (Make & Model No-GODREJ/DELITE HI-TECH/GEEKEN/DURIAN, FD/E6/MAP/01) Removing UNSV & S & F new seat & back made out of 12mm thick hot pressed plywood duly upholstered with fabric & moulded polyurethane foam and the back foam shall be designed with contour lumber support with PVC lipping all around. The cushions shall be of 40 density, 75mm thick for seat & 50mm thick for back alongwith the fabric of approved quality & colour complete all as specified and directed.

Removing UNSV & S & F castor wheels heavy duty as per the approved sample complete all as specified and directed.

Removing UNSV & S & F new handrest matching with existing all in shape,size,material & quality complete all as specified and directed.

Removing UNSV & S & F new pedestal assembly matching with existing all in shape,size & quality complete all as specified and directed.

Removing UNSV & S & F new synchro tilting mechanism complete all as specified and directed.

M & L for servicing the gas lift mechanism for making the seat adjustment functional.complete all as specified and directed.

Repair of Chair CB Steel with Arms : FD-75(M) M & L for removing unserviceable seat from chair CB steel with arms and S & F new seat made out of 2nd class hard wood and canned with 2mm to 2.50mm wide and 0.4mm thick plastic cane white colour and 4mm wide 0.6mm thick plastic cane for all round the border including black polishing to the wooden frame and fixing to the same with 4 Nos GI Nut and bolts of size 3/16"X3" long with two washers on either side of the seat, and all as specified and as directed by Engr-in-Charge.

M & L for removing unserviceable back from chair CB steel with arms and S & F new back made out of 2nd class hard wood and canned with 2mm to 2.5mm wide and 0.4mm thick plastic cane white colour and 4mm wide 0.6mm thick plastic cane for all round the border including black polishing to the wooden frame and fixing to the same with 4 Nos GI Nut and bolts of size 3/16"X3" long with two washers on either side of the back, and all as specified and as directed by Engr-in-Charge.

M & L for removing unserviceable/broken arms from chair CB steel with arms and S & F new arms made out of first class teak wood and handle shall be black polished and fixed to the chairs CB steel with arms with suitable wooden screws, and all as specified and as directed by Engr-in-Charge.

M & L for preparation of steel surfaces by emery paper to Chair CB steel with arms and applying one coat of synthetic enamel paint olive green/smoke gray shade approved quality over a coat of red oxide primer and all as shown on Drg. And as directed by Engr-in-Charge.

REPAIR OF CHAIR VARANDAH :-FD/E6/MAP/12 M & L for removing old unsv plastic sheet seat & back of Chair Varandah and S & F new seat and back (Colour Black) best quality plastic sheet of approved Make Polimar , required welding work for broken frame and S & F 2 nos of 10mm iron rod for supporting for bottom of chair varandah equal distance and redusting and applying two coat of synthetic enamel paint black colour over a coat of red oxide primer of approved make and providing suitable hard rubber shoes 4 Nos approved quality for each chair and all as specified and as directed by Engr-in-charge. Make of Paint:-Berger/Asian paint/Jonson and Nicholson Paints.

CHAIR DINING - FD-228,262,279 & 1105 :- S & F of following existing old broken wooden components of chair dining similar items carefully without disturbing the adjoining parts and new components made out of first class Indian Teak wood in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, glueing,placing every part in-tact all as specified in Drg and directed by Engr - In Charge. Top back rest

Bottom leg stiffener

Front legs

Rear Legs

Seat Member/Seat Rail

Rubber/PVC shoes

M&L for preparation of wooden surfaces of chair dining by scraping with sand paper, redusting and apply putty wherever required and polishing the surface with french polish to get glossy finish all as directed by Engr-in-Charge.

CHAIR EASY: FD-229 & 358 :- S & F of following existing old broken wooden components of chair Easy similar items carefully without disturbing the adjoining parts and new components made out of first class Indian Teak wood in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, glueing,placing every part in-tact all as specified in Drg and directed by Engr - In Charge. Rear legs

Front Legs

Seat bottom Rail

Seat Member/ Seat Rail

Back Member/ Back Rail

Rubber/PVC shoes

M&L for preparation of wooden surfaces of chair Easy by scraping with sand paper, redusting and apply putty wherever required and polishing the surface with french polish to get glossy finish all as directed by Engr-in-Charge.

CHAIR WRITING:-FD-250, 261, 280 & 1107 :- S & F of following existing old broken wooden components of chair writing similar items carefully without disturbing the adjoining parts and new components made out of first class Indian Teak wood in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, glueing,placing every part in-tact all as specified in Drg and directed by Engr - In Charge. Back rest

Bottom Leg Stiffener

Front Legs

Rear Legs

Seat Member/ Seat Rail

Rubber/PVC shoes

M&L for preparation of wooden surfaces of chair writing by scraping with sand paper, redusting and apply putty wherever required and polishing the surface with french polish to get glossy finish all as directed by Engr-in-Charge.

RECANING OF WOODEN CHAIRS M&L for removing old unserviceable plastic cane form wooden chair and providing new white colour plastic cane 2mm to 2.5mm wide 0.40mm thick for weaving and 4mm wide plastic cane of 0.60mm thick for border work suitable for following description of chairs( weaving shall be Godrej pattern) and all as directed by Engr-in-Charge and as shown on drg . Chair Dining:- FD-279,262,228,1105

Chair Verandah FD-333, 256

Chair Writing:-FD-261,280,250,1107

Chair Easy:-FD-229,358

Vinayak Distributors

SNEH CORPORATION

SK INDUSTRIES