REPAIR TO APPROCHES PATHWAY TO CERTAIN OTM AND MD ACCN AT RANIKHET UNDER GE RANIKHET

Amount

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles

M&L precast cement concrete 1:3:6 type C1 (using 20 mm graded stone aggrigate) as in block masonry with solid blocks exc 10 cm in width and set in cement mortar 1:6 complete all as specified and directed.

M&L for brick work with sub class 'B' old size bricks, straight or curved on plan exc 6m mean radius with old size bricks built in cement mortar 1:6 complete all as specified.

S&F glass dividing strips, 3 mm thick and 38 mm wide inserted in position and conforming to design complete all as specified and directed.

Taking down cement or cement lime plaster from brick or stone walls etc. including raking out joints, hacking for keys, scrubbing down with water etc. complete all as specified and directed.

M&L for rendering 15mm thick on fair face of brick work or concrete surfaces in CM 1:4, including additional thickness is provided as floating/ setting coat complete all as specified and directed.

M&L for preparation of newly plastered wall surfaces and applying three coats of white wash complete all as specified and directed.

M&L for hard core of broken stone or boulders gauge n.exc 63mm deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 100 mm thick cement concrete 1:4:8 type D-2, 40 mm graded stone aggregate as in foundation, filling, mass concrete, sub base and apron etc. complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:4:8 type D-2, 40 mm graded stone aggregate as in foundation, filling, mass concrete, sub base and apron etc. complete all as specified and directed.

M&L for 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes complete all as specified and directed

M&L for chequered cement concrete tiles with grey cement and pigments 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors complete all as specified and directed

M&L for providing PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in roof kerbs or mud stops rouded or chamfered on edges, plinth courses, copings, kneelers, apex stones, kerb water tough and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specifed and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigment complete all as specifed and directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

Dismantling of wrought iron or mild steel work any description and fixed in any position complete all as specified and directed.

M&L for framed work such as grills, gratings etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars barred iron doors, ladders, framed balusters, wlak ways, railings, fram work of water tanks and similar work etc complete conforming to Fe 290-0 grade-E-165 complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm width or girth, not otherwise described and apply two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

M&L for pre-cast cement concrete 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) as in cover slab for manholes, landing etc, set in CM 1:6 complete all as specified and directed.

S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending, binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

SS Construction Co

M/s RK JOSHI&SONS

Builders Harpal

NK CONSTRUCTION

M/S S R Construction