SDRF KP Rectification of flood damages- Rectification of Motor thara and Construction of motor shed to Irunnoottumpadavu padasekharam in Ramankary Panchayath

Amount

scheme 1 Construction of motor shed

2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

5.22.1 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelMild steel and Medium Tensile steel bars

50.10.2 : Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

od28872/2020_2021/KP : Providing ridges o hips with 45cm overall width plain GS sheet fixed with polymer coated Jor L hooks , bolt and nut 8mm dia GI limpet and bitumen washers completed 4mm thick with zinc coated not less than 275 gm/ m2

od28873/2020_2021/KP : Providing and fixing pre-coated galvanized iron profile sheet ( size, shape and pitch of corrugation as approved by engineer incharge) 0.50mm ( +0.05%) total coated thickness width zinc coating 120 gm/m2 as per IS 277, in 240 mpa steel grade , 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns sheet should have protective guard film of 25 microns minimum to aviod scratches during transportation and should be supplued in single length up to 12m or as desired by engineering charge the sheet shall be fixed using self drilling/self tapping screws of size 5.5X55mm with EPDM seal, complete up to any pitch in horizondal / vertical or curived surface excluding the cost of purlin, rafters and trusses and including cutting to size and shape where ever required

scheme 2 Repairing of motor thara

2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

60.7.1 : DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site

7.1.1 : Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)

4.1.5 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

4.3.1 : Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns

PKMURALEEDHARAN

Bidder Name

PKMURALEEDHARAN

LOVELY CONSTRUCTION