Construction of net mending shed at Marad, Beypore in Kozhikode district-General Electrical Work(Re-Tender)

Point wiring

1.10.1:Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group A

1.10.3:Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C

1.11:Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

1.33:Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

conduits

90.1.1.1:Supply and laying medium gauge PVC conduit of the following sizes conforming to IS 9537/1983 Part III in roof slab, jointing the pipes with PVC solvent cement, tying & fixing the conduit firmly with the re-inforcement etc. as required.20 mm

90.1.1.2:Supply and laying medium gauge PVC conduit of the following sizes conforming to IS 9537/1983 Part III in roof slab, jointing the pipes with PVC solvent cement, tying & fixing the conduit firmly with the re-inforcement etc. as required.25 mm

1.21.1:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm

1.21.2:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm

Sub-Circuit Wiring

1.17.3:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm

1.17.12:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 2.5 sq. mm

Switches and Sockets

1.31:Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings).

1.32:Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

1.56:Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providng and fixing 2 Nos. 3 pin 5/6 A modular socket outlets and 2 Nos. 5/6 A modular switches, connection etc. as required. (For light plugs to be used in non residential buildings).

1.57:Supplying & fixing suitable size Gl box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required. lCD

90.10.3.32:Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )25A 3 pin plug top with indicator

1.27.4:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.6 Module (200mmX75mm)

1.27.6:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.12 Module (200mmX150mm)

1.25:Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

1.24.1:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch

1.27.5:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.8 Module (125mmX125mm)

1.26:Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

2.4.1:Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)4 Way (4+12) Double door

2.13.1:Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.15.1:Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli Amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 25 amps

2.10.1:Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, ""C"" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

2.11:Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Cabling

90.12.6.40:Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium power cable of 1.1 KV grade of the following sizes in the existing masonry open duct as required.4 core 10 sq mm

90.12.7.40:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 10 sq mm with factory made clamp

9.1.32:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm)

OD251917/2025-2026:Supply and fixing 4 sqmm to 16 sqmm. 60 mm long x 12 mm wide x 1 mm thick Copper earthing clips for single compression glands

Grounding

5.4:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

5.14:Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.

90.16.1.2:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.65 mm copper conductor (12 SWG)

90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)

90.16.5.2:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.65 mm (12 SWG)

90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)

EM Box

OD266107/2025-2026:Supply and installation of weatherproof single/three phase Energy Meter Box with provisions for HRC fuse - 3Nos/1No; N-L - 1No. And FP/DP Isolator and RCCB, made in fiber. Double Door. Including all accessories for installation. (Approved Make by CPWD/KPWD/KSCADC)

OD266105/2025-2026:Supply and fixing of 2way N-L mounted on DMC/SMC base - 32A

OD266106/2025-2026:Supply and fixing of HRC fuse base with HRC fuse link - 20A

2.13.1:Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.15.1:Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli Amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 25 amps

Inventories

1.58:Supplying and fixing PVC batten/ angle holder including connection etc. as required.

OD266108/2025-2026:Supply and fixing of LEW bulb of the following size as required - 9W (Make: Philips, Crompton or equivalent make approved by CPWD/KPWD/KSCADC)

OD266113/2025-2026:Supply and fixing of Rectangle Shape Outdoor Bulkhead Waterproof with LED fixture having Light for Outdoor/Garden/Bathroom Light. Strong Build Quality and Toughness to Withstand Irregular Conditions. Protects against Unstable Power Condition or Sudden Peaks in AC Voltage up to 4kV. Built with Exceptional Durability to Withstand Wet and Harsh Conditions. 10W (Make: Philips, Crompton, Bajaj or equivalent make approved by CPWD/KPWD/KSCADC)

90.3.18.2:Supply, fabrication, conveyance and fixing the following sizes of B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required.32 mm dia with HG company fabricated clamps

90.15.4.2:Supply Conveyance, installation, testing and commissioning of 36/40W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)

90.4.10:Conveyance, installation , testing and commissioning of exhaust fans of size up to 450mm in the existing opening, fixing necessary anchor bolts / bolt and nuts etc., as required including giving connections with the supplied wire along with the exhaust fan.

90.4.8:Charges for cutting holes suitable for accommodating exhaust fans up to 305mm sweep including plastering colour washing etc. as required.

OD257865/2025-2026: Supply of 150mm sweep Light Duty Exhaust fan in plastic body with self-opening lowers working on 230V single phase A/C. Approved make by CPWD/KPWD/KSCADC.

90.4.1:Supply and installation of suitable size MS rod type fan clamp in the RCC slab as per IS 732 as required.

90.4.5.4:Supply, Installation, testing and commissioning of ceiling fan of following sizes including wiring the down rods of standard length (up to 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. 1200mm sweep - ceiling fan complete with service value minimum 4.0(cub meter/minute/Watt), Air delivery minimum 210(cubic meter/minute), Copper winding suitable for 230V/240V single phase AC supply

1.25:Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

OD257866/2025-2026:Supply, Installation, Testing and Commissioning of 20W LED tube set (4 feet length, plastic body) of reputed brand. With all necessary equipment.

OD266220/2025-2026:Supply, erection, testing and commissioning of 0.50 HP mono block pump set (pump and motor) for operating 220 Volt, 50 Hz single phase supply set like model MDH 12H of LUBI brand or equal /nearest higher size Crompton, Kirloskar brand having head of 10-to-22-meter, discharge 125 to 80 LPM, supply and installation of tower bolt and giving all connections, earthing the pump set etc complete. Including charges for providing suitable angle iron framework for fixing the motor.

90.12.10.2:Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation50/38 mm or nearest size

90.6.6.1:Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.1.50 sq mm

90.14.28.1:S & F Motor starters of the following ratingsSingle phase DOL starters for 0.25HP to 3HP motor

90.3.18.1:Supply, fabrication, conveyance and fixing the following sizes of B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required.25 mm dia with HG company fabricated clamps

Fire and safety

OD266102/2025-2026:Supply, fixing and installation of ABC Powder Type 6 Kg Fire Extinguisher (Red and Black) effective for all types of fire like Class A, B and C types of fires as well as Electrical fires and also ABC Powder Type (Stored Pressure) Fire Extinguisher, Multipurpose uses with 1 Wall Hook and 1 Discharge Pipe. ISI, ISO and CE Certified Product and Multipurpose Uses ABC Type fire extinguisher 6 Kg with 5 years Warranty. (Approved make by CPWD/KPWD/KSCADC)

OD266103/2025-2026:Supply and providing First Aid Box with following first aid medicines and accessories, suitable for 10 persons, 3 Partitions with Front glass/acrylic for medicines organize with lock and 2 set of keys and Top side handle for carry to anywhere and also Wall Mountable. 1) First Aid Book 2) Antiseptic Cream 10gm 3) Antiseptic Lotion 50ml 4) Tweezer Plastic 5) Sterile Burn Dressing 10cm 5) Sterile Adhesive Plaster 6x10cm 6) Scissor 7cm 7) Dusting Powder 10gm 8) Absorbent Cotton 20gms 9) Elastic Gauze Bandage 6x1M 10) Adhesive Plaster 19x72mm 5pcs 11) Adhesive Plaster 25x72mm - 3pcs 12) Adhesive Plaster Round - 2pcs 13) Wound Cleaning Wipes - Alcohol - 2pcs 14) Sterile Gauze Swab 10cm - 2pcs 15) Sterile Gauze Swab 7.5cm - 2pcs 16) Safety Pin - 10pcs 16)Triangular Bandage 17) Sterile Dressing Medium 18) Tincture Iodine 20ml 19) Microporous Tape 1.25x5M 20) Instant Cool Pack 21) Tourniquet 22) CPR Mouth Barrier 23) Electrolyte Powder 4.2gm - 2pcs 24) Sterile Eye Pad Oval - 2pcs 25) Sugar Sachet - 3pcs 25) Common Salt Sachet - 3pcs

OD266104/2025-2026:Supply and providing laminated First Aid chart duly framed and placed in a conspicuous location for clear vision.

Solar Marine Grade Mini Mast Lamp

OD266222/2025-2026:Supply, Installation, Programming and Commissioning of 70w Non integral Solar Floodlight System with 24 hours backup and dimming option. a) Floodlight Luminaire shall have min 11,000 Lumens System output, greater than 160 Lumens Per watt system efficiency, suitable for dimming, IP66 & IK08 Protection, luminaire shall be made of single piece Pressure Diecast aluminum Housing and individual lens for each LED embedded on single piece Polycarbonate cover. minimum 75,000 burning hours life as per L70 and 500 hours Salt spray tested finish of Philips BVP483 series or techno commercial equivalent - 1 No. b) The Solar Panel shall be of min 200Wp Mono-Crystalline of 39V with excellent aging resistance and UV endurance to withstand harsh environment, environmentally sealed to IP67 - 1 No. c) The Batteries using in the system shall be Lithium Pherro Phospate type with 2150Wh capacity, 72Ah and min 25.6V, Maintenance free battery having minimum 2000 cycles life - 1 No. d) The Charge controller using in the system shall be of 80w MPPT type Programmable and Dimmable via mobile app, Fully Potted, with > 93% efficiency and IP67 Connectors. Built in protection of Battery Reverse Polarity, Panel Reverse Polarity, Panel Reverse Current, Surge Protection at PV input, Battery Over Voltage, Load short circuit and fuse protection in series for battery - 1 No. Supply and installation of 10 meters hot dip galvanized Octagonal Pole with top 100mm and bottom 310mm dia made of 4mm sheet thickness, Mounting Brackets for holding Solar panels and Battery at top and Second ring bracket for fixing floodlights with all accessories.. The structure shall be hot dip galvanised as per IS 4759 : 1996 / IS 2629 : 1985 and be structrually designed to withstand 39m/s wind speed of Philips, Utkarsh Valmont or Techno commercial Equivalent. Excavation and Civil foundation casting and installation of solar minimast system using M25 grade concrete in 500x500mm and 1000 mm under soil and 20 cm above ground level along with required reinforcement as per site condition, PCC of 100mm thick shall be done after earth compacting , 12mm 10mm and 8mm dia reinforcement including all materials and labour as per OEM Drawing. Supply and wiring with ISI marked, FRLS PVC,UV Protected insulated following size single core Copper conductor cables for interconnecting the control devices/ equipments including the wiring firm by suitable tie/ tie mounts/ PVC duct etc with sockets as required. 4.00 Sq.mm Double run. Supply and Fixing of high-quality bird and pigeon spikes (6/4/BS-18-1-64BS18) for using prevent birds from settling on solar panels. These spikes act as an effective deterrent, ensuring that birds do not nest or perch on the panels, which can cause damage, reduce efficiency, and lead to maintenance issues. Made from durable materials, the spikes are designed to withstand various weather conditions while ensuring the safety and cleanliness of your solar panel system.