CONSTRUCTION OF MADHYAHAN BHOJAN SHED IN EXISTING NAGAR PRATHMIK SCHOOL NO.309 AND CONSTRUCTION OF NEW TOILET BLOCK AT SECOND FLOOR AND THIRD FLOOR AND RENOVATION OF DOOR-WINDOW IN EXISTING NAGAR PRATHMIK SCHOOL NO.355 IN NEW EAST ZONE(SARTHANA) SURAT.

S.O.R 2024-2025.(Without GST)

Description Quantity Rate Per Amount

PART-A (MADHYAN BHOJAN SHED)

1 Demolition including stacking of serviceable materials and

disposal of unserviceable materials with all lead & lift.

(i) RCC work 6.80 1110.75 C.M.

2 Dismentaling tiled of stone floors laid in mortar including

stacking of serviceable materilas and disposal of

unserviceable materials with all lead and lift.

Kota stone flooring and steps 3.20 50.11 S.M.

3 Boring holes 3.5 mt. Deep in ordinary soil ( for cast in situ

piles ) & disposal of the surplus excavated soil as directed

within a lead of 50 m. For following diameter of piles.(2) For

4 Excavation for foundation including sorting out and stacking

of useful materials and disposing of the excavated stuff up

to 50 mt. lead and all lift, watering etc.comp.(A) Loose or

Executive With Manual Labours

(A) loose or soft soil

( II ) 1.5 To 3.0 MT Depth 0 235.05 C.M. -

5 Excavation for foundation includ.sorting out & stacking of

useful materials & disposing of the excavated stuff upto

50 mt. Lead & all lift, watering etc. Comp. (A) Loose or

Executed With Mechanised Efforts / Machinaries

(1) Up to 1.5 Mt. depth 5.30 123.13 C.M.

6 Providing and laying cement concrete 1: 4: 8 (1 cement :

4coarse sand :8 graded stone aggregates 40 mm nominal

size) and curing complete including cost of formwork in:

(A) Foundation and plinth 3.00 2769.69 C.M.

7 Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6

Crushed stone agg 20m.m Nominal size)&curing comp.

excl. cost of form work in :(a) foundation & Plinth

(A) Foundation and plinth 2.60 3095.25 C.M.

8 Providing and laying cement concrete work 1:1.5:3 (1

cement :1.5 coarse sand :3 graded stone aggregate 20 mm

nominal size) and curing complete including cost of form

work but excluding cost of reinforcement for reinforced

concrete work in :

(A) foundation, footing, base of columns and mass concrete

Description Quantity Rate Per Amount

9 Providing and laying ordinary cement concrete 1:1.5:3 (1

cement :1.5 coarse sand :3 graded stone aggregate

20mm nominal size) and finishing smooth etc. complete

including cost of form work but excluding the cost of

reinforcement for R.C.C. work in:

(1) Having cross sectional area upto

upto G.L./P.L. 1.20 12844.32 C.M.

(2) Having cross sectional area more than 0.08 and up to

upto G.L./P.L. 1.20 11166.97 C.M.

(3) Having cross sectional area more than 0.12 sq. mt.

upto G.L./P.L. 0 9201.68 C.M. -

(1) Having cross sectional area up to 0.08 sq.mt.

upto G.L./P.L. 6.70 9102.61 C.M.

(2) Having cross sectional area more than 0.08 sq. mt and

upto 0.12 sq.mt.

(3) Having cross sectional area more than 0.12 sq.mt.

10 Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6

crushed stone agg. 20 m.m Nominal size)& curing comp.

incl. cost of from work in: wall caps/ copings.

11 Providing & fixing IS Mark TMT Bar FE 500 / FE 500D

reinforcement for R.C.C. work incl. bending, binding &

placing in position etc. comp Up to G.L./P.L.

Upto G.L./P.L. 2003.00 77.29 Kg.

12 Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in Cement

Mortar 1:6 (1- Cement : 6 -fine sand)(C) Fly Ash Bricks

upto G.L./P.L. 8.10 4441.11 C.M.

13 Filling available excavated earth (excluding rock) in

trenches. plinth, sides of foundations etc. in layers not

exceeding 20 cm. in depth consolidating each disposited

layer by ramming and watering. 0.00 136.92 C.M. -

14 Filling in foundation and plinth with murrum or selected soil

in layers of 20cm. thickness including watering, ramming

and consolidating etc. complete. 57.80 301.78 C.M.

15 Providing & Applying 20mm. Th. Heavy Roller plaster

on walls or similar surfaces at all floor levels consisting of

12 mm av. Th. Backing coat of C.M. 1:3 (1 cement:3 sand)

& 8 mm. th. Finishing coat of C.M. 1:1 (1 cement:

sand) apply thick cement slurry and apply roller horizontal

as well as vartical ( two times ) up to good quality and size

of grain in elevation as per directed by engineer incharge.

upto G.L./P.L. 60.30 324 S.M.

Description Quantity Rate Per Amount

16 Providing & Applying 10mm.th.cement plaster in single

coat on brick/ concrete walls similar surfaces for plastering

& finished even & smooth with a floating coat of cement

slurry mixed with admixture of lime or neeru in required

proportion etc. comp. in C.M 1:3 (1 cement : 3sand) (A)

For wall and similar surfaces

Up to pinth level 41.90 199.28 S.M.

17 Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in Cement

Mortar 1:6 (1- Cement : 6 -fine sand)(C) Fly Ash Bricks

Ground Floor 0.00 4729.83 C.M. -

18 Half brick masonry in common brunt clay building

bricks having crushing strength not less than 35 Kg/Sq.Cm.

in Cement mortar 1:4 (1- Cement : 4 - coarse sand ) in

foundation and plinth (C)Fly Ash Bricks

Ground Floor 0.00 712.81 S.M. -

19 Providing throating or plaster drip and moulding it to

R.C.C. chajja etc. comp.. For all floor

20 Providing 20 mm deep finished groove in plaster in

line and level etc. Comp. For all Floor (M.R.)

21 Providing and laying polished Kota stone slab flooring over

20mm (Average) thick base of cement mortar 1:6 (1-cement

: 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse

sand) laid over and jointed with grey cement slurry

mixed with pigment to match the shade of slab including

rubbing and polishing etc. complete. (A) 25mm thick

All Floor 220.40 1019.39 S.M

22 Providing and laying polished kota stone slab 25mm

thick in risers of steps,skirting Dedo and pillars laid on

10mm thick cement mortar 1:3 (1- Cement : 3 coarse

sand) and jointed with gray cement slury mixed with

pigment to match the shade of slab including rubbing

and polishing etc. complete.

All Floor 0.00 1130.79 S.M -

23 Providing and laying Ceramic tiles 6mm thick in skrting

risers of steps and dedo on 10mm thick cement plaster

1:3 (1-cement : 3-coarse sand) and jointed with white

All Floor 42.70 1037.25 S.M.

24 Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24"

in flooring treads of steps and landing laid on a bed of 12mm

thick cement mortar 1:3 (1 cement : 3 coarse sand) finishing

with flush pointing in white cement.

Description Quantity Rate Per Amount

25 Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24"

in skrting risers of steps and dedo on 10mm thick cement

plaster 1:3 (1 cement : 3 coarse sand) and jointed with white

26 Providing & laying granite slab 18mm thick in flooring,

treads of steps and landing laid on bed of 20mm thick

cement mortar 1:6 (1 Cement : 6 coarse sand) or lime

mortar 1:1.5 laid and finished with flush pointing in white or

colour cement including rubbing and polishing

complete. ( Basic Rate:-

All Floor 0.00 2410 S.M. -

27 Providing & laying granite slab 18mm thick in skirting,

risers of steps, dedo and pillars laid on 10mm thick

cement mortar 1:4 (1 Cement : 4 Coarse sand) and

finished with flush pointing in white or colour cement

including rubbing & polishing comp.. (Basic Rate:-

All Floor 23.80 2449 S.M.

28 Providing and Fixing Hollow steel Sections Framed

Work including Cutting, Hoisting, Welding & Fixing in

position Purlin, Main Chord etc. as per Engineer- in-

charge.TATA / JINDAL / ASIAN Make

29 Distempering two coats with oil bound washable

distemper of approved brand & manufacture & of

required shade on wall surface to give an even shade

over and & including a priming coat of alkali resistance

primer of approved brand after throughly brushing the

surface to give an even shade after throughly brushing the

surface free from mortar droppings and other foreign matter

and also including preparing the surface even and smooth.

(A) walls 0.00 75.84 S.M -

(B) Ceiling 0.00 84.37 S.M -

---do Extra Subsequant coat over above Item

(A) walls 0.00 31.91 S.M -

(B) Ceiling 0.00 35.25 S.M -

Description Quantity Rate Per Amount

30 Providing & applying two coats of weather shield max paint

(3 coats may be required in case of darker colours.)of ICI

Dulux or Apex Ultima of Asian Paint including applying

exterior acrylic primer coat as per manufacturers

specification and directions in shade and colour approved by

architects, on exterior surfaces of the building including

scaffolding, preparing the surface, watering, curing etc.

complete and as directed by the architects and

Surface Preparation :

surface is thoroughly clean, dry and free from all loose

dirt, chalk, grease, fungi, algae and flaking paint. This can

be achieved by brushing with a wire/ stiff coir brush, followed

by water jetting if required. Fill up all minor cracks and

defects with white cement and sand mixture in the ratio

1:3. For application on previously painted wall, previous

coatings of paint must be thoroughly scraped off and

Clean the surface thoroughly using wire brushes.

Apply a liberal coat of exterior acrylic primer and allow it to

dry for 4-5 hours. Application of putty is not recommended.

Minimum 4-6 hours duration is required between each coat

of weather shield max paint

All Floor (M.R) 60.30 82 S.M

31 Painting two coat (excluding priming coat) on new

steel and other metal surface with synthetic enemal

paint, burshing to give an even shade including

cleaning the surface of all dirt, dust and other foreign

All Floor 190.00 68.7 S.M.

32 Providing & fixing colouron galvaniced steel, zinc /

aluminium allus coated sheet 0.5 mm. thick roofing fixed

with gslvanised grom J or L hook bolts and bolt 8mm dia

with bituman and impet washer filled with white lead

etc. Excluding the cost of purlins rafter and trusses. (Tata /

Jindal or equivalent) 346.00 999.00 S.M

33 Providing ridges or hips 600mm over all in plain G.I.

sheet fixed with G.I. "J" of "L" hooks bolts and nuts

8mm dia G.I. limpet and bitumen washer complete (1)

0.80 mm thick 35.00 664.70 R.M

34 Providing & fixing 150mm wide 450mm over all

semicircular plain G.I. sheet class-3 gutter with iron

brackets 40mm x 3mm size bolts, nuts, washers etc.

including marking necessary connection with rain water

(i) 0.80mm thick 35.00 581.32 R.M

35 Providing & fixing U-PVC pipes Confirming to IS no.

(Type "A") of Prince/Supreme/Jain/Astral/ Tulsi/Finolex

make for rain water at all floor levels incl. fixtures like bends,

tees, shoe etc joined with resin of approved brand &

manufacture etc. comp. (M.R.)

PART-A (MADHYAN BHOJAN SHED)

Description Quantity Rate Per Amount

PART-B SCHOOL RENOVATION (Class Room and Toilet

Block Door- Window Renovation)

36 Demolition of brick work and stone masonry including

stacking of serviceable materials and disposal of

unserviceable materials with all lead and lift. (i) On Cement

37 Removing and scraping of old deteriorated plaster of any

thickness from wall / RCC member including stacking of

serviceable material and disposal of unserviceable from site

of work with all lead and lift.

38 Dismentaling tiled of stone floors laid in mortar including

stacking of serviceable materilas and disposal of

unserviceable materials with all lead and lift.

Kota stone flooring and steps 39.40 50.11 S.M.

Marble 0.00 50.11 S.M. -

Tiles flooring / Dedo 23.00 50.11 S.M.

Granite flooring and steps 0.00 50.11 S.M. -

39 Dismentling door, windows, ventilators etc. (wood or steel)

shutters including chowkhats architraces, holdfasts and

other attacement etc. complete and stacking them within all

lead and lift. (i) Not exceeding 3 Sq.M. in area.

40 Dismentling door, windows, ventilators etc. (wood or steel)

shutters including chowkhats architraces, holdfasts and

other attacement etc. complete and stacking them within all

lead and lift. (i) Exceeding 3 Sq.M. in area.

41 Dismentling steel work including distempering and stacking

the materials with all lead and lift. 0.00 3.85 K.G. -

42 NOTE :- (1) The whole work is to be executed through

specialized agency with a guarantee of 10 (Ten) years

given on a prescribed proforma duly stamped (2) The

rate shall include for work at all floors & conducting

proof test as directed. (M.R.)

(A) Providing and laying water proofing treatment to

vertical and horizontal surfaces of depressed portions of

W.C.,kitchen and the like consisting of :

(a) I course of applying cement slurry @ 4.4 kg/sqm mixed

with water proofing compound conforming to IS : 2645 in

recommended proportions.

(b) II course of a layer of plaster in C.M. 1:3 with water

proofing compound confirming to IS:2645 about 25 mm. th'

in the floor of the depression & about 18mm th' On the side

walls of the depression up to the floor level, water proofing

plaster about 18 mm. th' be continued on the walls above

the floor level for a height of 600 mm. with surface suitable

to receive further treatment

(c) Finishing top with stone aggregate 10mm to 12mm

nominal size spreading @0.008 C.M./S.M., thoroughly

embedad in plaster layer.

as per specifications & instructions of Engineer in charge

(Cement consumption 0.316 Bags / S.M.)

Description Quantity Rate Per Amount

(B) Providing and laying integral cement based water

proofing treatment including preparation of surface as

required for treatment of roofs, balconies, terraces etc.

consisting of following operations.

(a) Applying and grouting a slurry coat of neat cement using

2.75 kg/sqm of cement admixed with proprietary water

proofing compound comforming to IS:2645 over the R.C.C.

slab including cleaning the surface before tratment.

(b) Laying cement concrete using broken bricks/brick bats

25 mm to 100 mm size with 50% of cement mortar 1:5 (1

Cement : 5 Coarse sand) admixed with proprietary water

proofing compound conforming to IS:2645 ,brick bats is

finally covered by jointless cement plaster 20mm th. in C.M.

1:4 added with special water proofing compound confirming

to IS:2645 & top smooth finished with trowel with false

chequered marking of 300 mm.size.The treatment is carried

along the vertical surface of the parapet & other adjoining

wall up to height of about 300 mm in a shape of quarter

round vata Incl. curing etc. Comp. With average thickness

of 120 mm and minimum thickness at khurra as 65 mm.

(c) The whole terrace so finished shall be flooded with water

for a minimum period of two weeks for curing and for final

test. All above operations to be down in order and as

directed and specified by the engineer-in-charge. With

average thickness of 120 mm and minimum thickness at

khurra as 65 mm. (Cement consumption 0.511 Bags / S.M.)

43 Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in Cement

Mortar 1:6 (1- Cement : 6 -fine sand)(C) Fly Ash Bricks

First Floor 0 5,018.55 C.M. -

Second Floor 5.90 5,307.27 C.M.

Terrace (third) Floor 5.90 5,595.99 C.M.

44 Half brick masonry in common brunt clay building

bricks having crushing strength not less than 35 Kg/Sq.Cm.

in Cement mortar 1:4 (1- Cement : 4 - coarse sand ) in

foundation and plinth (C)Fly Ash Bricks

Ground Floor 0 712.81 S.M. -

First Floor 0 719.37 S.M. -

Second Floor 7.60 725.94 S.M.

Terrace (third) Floor 7.60 732.50 S.M.

45 Providing & fixing IS Mark TMT Bar FE 500d

reinforcement for R.C.C. work incl. bending, binding &

placing in position etc.comp.---Ground Floor 0.00 77.29 K.G. -

First Floor 0.00 78.34 K.G. -

Second Floor 120.00 79.39 K.G.

Terrace (third) Floor 120.00 80.44 K.G.

46 Providing & laying ordinary cement

on.1:1.5:3(1cement:1.5 sand:3 graded stone agg. 20 mm

nominal size) finishing smooth curing etc. comp. Incl..

Cost of form work but excl. Cost of reinforcement for R.C.C.

(D) LINTELS: -- G.F 0.00 9982.37 C.M. -

First Floor 0.00 10023.32 C.M. -

Description Quantity Rate Per Amount

Second Floor 1.00 10064.28 C.M.

Terrace (third) Floor 1.00 10105.23 C.M.

47 Providing & Applying 10mm.th.cement plaster in single

coat on brick/ concrete walls similar surfaces for plastering

& finished even & smooth with a floating coat of cement

slurry mixed with admixture of lime or neeru in required

proportion etc. comp. in C.M 1:3 (1 cement : 3sand) (A)

For wall and similar surfaces -- Ground Floor

First Floor 0.00 228.84 S.M. -

Second Floor 78.50 258.39 S.M.

Terrace (third) Floor 78.50 287.94 S.M.

48 Providing and laying Ceramic tiles 6mm thick in

skrting risers of steps and dedo on 10mm thick cement

plaster 1:3 (1-cement : 3-coarse sand) and jointed with

white cement slurry 163.20 1037.25 S.M.

49 Providing & laying Vitrified tiles of 8mm thick of

Orient, Kajaria, Jhonson, Nitco, Somani, Bell, Asian or

Euro make in flooring,treads of steps & Landing laid

on bed of 20 mm (Average) base of cement mortar

1:6 (1 Cement : 6 Coarse sand) on new surface or

fixing on existing flooring by adhesive material including

dismentaling of existing flooring and jointed with colour

cement slurry including finished with flush pointing &

cleaning the surface etc. comp.Size 24" x 24" For Antiskid

50 Providing and laying polished Kota stone slab flooring over

20mm (Average) thick base of cement mortar 1:6 (1-cement

: 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse

sand) laid over and jointed with grey cement slurry

mixed with pigment to match the shade of slab including

rubbing and polishing etc. complete. (A) 25mm thick

51 Providing and laying polished kota stone slab 25mm

thick in risers of steps,skirting Dedo and pillars laid on

10mm thick cement mortar 1:3 (1- Cement : 3 coarse

sand) and jointed with gray cement slury mixed with

pigment to match the shade of slab including rubbing

and polishing etc. complete.

52 Providing & laying granite slab 18mm thick in flooring,

treads of steps and landing laid on bed of 20mm thick

cement mortar 1:6 (1 Cement : 6 coarse sand) or lime

mortar 1:1.5 laid and finished with flush pointing in white or

colour cement including rubbing and polishing

complete. ( Basic Rate:-

53 Providing & laying granite slab 18mm thick in skirting,

risers of steps, dedo and pillars laid on 10mm thick

cement mortar 1:4 (1 Cement : 4 Coarse sand) and

finished with flush pointing in white or colour cement

including rubbing & polishing comp.. (Basic Rate:-

Description Quantity Rate Per Amount

54 Providing & laying granite slab 18mm thick in Window-

Door seal Frame Etc laid on 10mm thick cement mortar

1:4 (1 Cement : 4 Coarse sand) with nessary adhesive

material and finished with flush pointing in white or colour

cement, including rubbing & polishing comp.. (Basic Rate:-

55 Labour Charges For Edge Finished For Granite 522.40 43.43 R.M.

56 Providing & fixing 35mm.th. Flush Door Solid Double Core

type Both Face water proof Ply Vennered & 1.5 mm

th.laminate shall be pasted on both side with adhesives

as specified by the manufacturers. The laminate shall be as

per approved shade & texture, of make incl. Sal wood

frames of finished size 12cm x 7cm.incl. S.S. Hinges

with nessary screws & Anodized aluminum fixtures &

fastenings For all Floor 0 3720 S.M. -

Same as Above But Without Frame 30.30 2520 S.M.

57 Providing and fixing FRP FRAME size 125 x 65 mm and

mm thick FRP shutter with wood grain raised panneled

design finish shutter having extra reinforcement on sides &

edges in Gel coat finish. The core of the shutter & frame is

to be filed up with injected polyurethene foam done in situ

along with embedded wooden pieces for stiffening & also

taking hinges & fixtures. The whole FRP frame & shutter is

to be water proof weather proof,termite proof &resistance to

mild acid/alkali. Rates are to be inclusive of S.S.hinges with

fastener sleeve & alluminium fixtures & fastentings.

58 Providing & Applying 15mm.th.cement plaster in single

coat on brick/ concrete walls similar surfaces for plastering

& finished even & smooth with a floating coat of cement

slurry mixed with admixture of lime or neeru in required

proportion etc. comp. in C.M 1:3 (1 cement : 3sand) (A)

For wall and similar surfaces -- Ground Floor

59 Providing and fixing window having extruded aluminium

Powder Coated section frame main outer size 95 mm x

mm x 1.17 mm (of jindal section no:2459 @ Wt. of

Kg/mt), horizontal Three track member size 92 mm x

mm x 1.30 mm (of jindal section no;8688, @ Wt.

Kg/mt), vertical member of size 92 mm x 31.75 mm x

1.50 mm (of jindal section no:8933, @ Wt. 1.06 Kg/mt)

with sliding shutters of horizontal member size 40 mm x

mm x 1.29 mm (of jindal section no:8947 @ wt. of

kg/mt), vertical member of size 40 mm x 18 mm x

mm (of jindal section no:8949 @ wt. of 0.456 kg/mt) with

mm thick transparent bronze colour tinted float glass with

powder coated aluminium fittings & fixtures and transparent

silicon sealant glass fixing to frame as per details etc.

(A) Same as above but Colour anodized 242.00 1591.87 S.M.

Description Quantity Rate Per Amount

60 Providing and fixing window having extruded aluminium

Powder Coated section frame main outer size 63.50 x

38.10 x1.95 mm (of Jindal section no.4605, @ Wt.

1.094Kg/mt) horizontal Two track member size 61.85 mm x

31.75 mm x 1.20 mm (of jindal section no:8687, @ Wt.

0.695 Kg/mt.) vertical member of size 61.85 mm x 31.75 mm

x 130 mm (of jindal section no:8758 @ wt. of 0.659 kg/mt)

with sliding shutters of horizontal member size 40 mm x18

mm x 1.29 mm ( of jindal section no:8949, @ Wt. of .456

Kg/mt) vertical member of size 40 mm x 18 mm x 1.29 mm

(of jindal section no:8947, @ Wt. of 0.456 Kg/mt/section

8948, @ Wt. of 0.457 Kg/mt) with 5 mm thick tranparent

bronze colour tineted float glass with powder coated

aluminium fittings and fixtures and transparent silicon

sealant glass fixing to frame as per details etc.

complete for window.

(A) Same as above but Colour anodized 3.00 1705.67 S.M.

61 Providing and fixing standared extruded ofalluminium

section of size 63mm x 38.10mm x1.2mm , @ Wt.

Kg/mt with colour Powder Coated alluminium frame for

ventilation with

mm thick frosted glass as details etc complete for Ventilation

(A) Same as above but Colour anodized 10.00 1175.56 S.M.

62 Providing and fixing standared extruded of aluminium

section of size 61 x 37.0 x0.90 mm (of Jindal section

no.14080, @ Wt. 0.471 Kg per mt) with Powder

Coated alluminium frame with 5 mm thick transparent

bronze colour tinted float glass as details etc. complete for

fix window. 0 1833.29 S.M. -

(A) Same as above but Colour anodized 0.00 1833.29 S.M. -

63 Providing & fixing M.S.Grills of required pattern to wooden

frames of windows etc. At all floor levels with M.S. flats

at required spacing & frame around square or round bars

with round headed bolts & round headed bolts and nuts or

by screws incl. Priming coat of Red lead paint etc. comp. (A)

Plain grill For all Floors 1121.50 109.41 KG.

64 Painting two coat (excluding priming coat) on new steel and

other metal surface with synthetic enemal paint, burshing to

give an even shade including cleaning the surface of all dirt,

dust and other foreign matters.

Ground Floor 56.10 68.57 SQ.Mt.

65 Providing & fixing at all floor levels,both face polished

machine cut edge Marble slab for urinal partition joined

with grey/White cement slurry (1:1) incl. Rubbing &

polishing etc. complete. (M.R.)( Basic Cost- Rs. 450/S.M.)

66 Prov.& Fixing water closet squatting pan (Indian type

W.C.pan) at all floor levels, size 580mm incl. 100 mm size

"P'or "S" trap for water closet squatting pan joining the trap

with the pan & soil pipe in C.M. 1:1 (1cement :1 fine

sand) etc. Comp.(A) Vitreous china long pattern of

approved colour For all Floor 12.00 1471.41 Nos.

Description Quantity Rate Per Amount

67 Providing and fixing Wash Down Water closet European

type W.C. pan with integral P or S trap including jointing the

trap with soil pipe in cement mortar 1:1 (1 cement : 1 find

sand) (seat and cover to be measured and paid for

separately) (A) Viterous china pattern - I (i) in approved

colour 12.00 1356.81 Each

68 Providing & fixing Urinal or approved quality including

conecting the Urinal with waste pipe, tap etc. complete. (A)

White earthenware flat back or corner type size 430 mm x

69 Providing and fixing PVC SWR Nahni trap IS 14735 for

drain - 110x110 mm diameter with jali of the following

nominal diameter of self cleaning design with C.I. scread

down or hinged grating including the cost of cutting and

making good the walls. 24.00 586.27 Nos.

70 Providing & fixing 15mm C.P. brass angle valve (Stop

Cock) with C.P. copper connecting pipe 450 mm long and

nuts, washer and brass flange complete, including cutting

and making good the wall where required.

Make- Cera F1020362, HindWare Cat. No.: F440020

jaquar CON 053 KN

71 Providing, Laying and jointing on true line and level UPVC

pipe (SCH-40) line of Prince/Supreme/Jain/Astral/

Tulsi/Finolex make including fittings make or equivalent

as approved by angineer-in-charge. Pipe shall be fixed on

the wall the help of clamp at every two meter C/C or

shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

72 Providing & Fixing C.P. Brass screw down bib tap at all

floor levels, polished bright etc. comp.-(A) 15mm dia. For all

Floors 50.00 186.83 Nos.

73 Providing & Fixing gun metal check or non return full way

wheel valve at all floors levels, etc. complete. (A) 15 mm.

74 Providing & Fixing chromium plated brass half turn flush

cock at all floor levels, of approved quality incl. fixing in pipe line etc.

Comp.-- 25 mm dia. 20.00 263.77 Nos.

75 Providing & Fixing U-PVC pipe (SWR) confirming to IS no.

13592 (Type "B") of

Prince/Supreme/Jain/Astral/Tulsi/Finolex make for soil

and waste discharge system at all floor levels incl. All

fixtures like bends, tees, shoe etc. jointed with resin of

approved brand & manufacture etc. comp. (M.R.) (a)

Description Quantity Rate Per Amount

76 Providing & fixing wash basin with single hole for pillar tap

at all floor levels, with C.I. or M.S. Brackets painted white

incl. cutting holes & making good the same incl. fittings such

as pillar tap, capstan head screw down high pressure with

screws, shanks & back nuts, C.P. Brass waste trap, screw

down stop tap 15 mm. dia. etc. complete. (A) Vitreous

china flat back wash basin 550 mm.x 400 mm. size in

approved colour For all Floor

77 Providing & fixing 600 mm.x 450 mm. mirror of

superior glass at all floor levels, mounted on 6 mm. th.

A.C. sheet or plywood sheet & fixed to wooden plugs with

C.P.brass screws and washers etc. For all Floor

78 Prov. & Fixing S.W. Gully trap with C.I.grating

brick masonary (C.M 1:5)chamber & water tight Pre

cast R.C.C. cover of 300mmx300mm size (inside)

includ. plastering smooth inside & outside 15mm. th' in

C.M.1:3 etc comp. (i) Square mouth traps---(A) 300mm x

300mm Size -P type 12.00 1098.05 Nos.

(B) 150mm x 100mm Size- P Type 10.00 1052.77 Nos.

79 Prov. & Fix. 10 cm.x15 cm.(4" x 6") S.W. trap with Inside

dimension ,455 x 610 mm & 450 mm deep sewer trap

chamber with 23 cm th' B.B. masonary walls in C.M 1:5 with

cement plaster 15 mm th' in C.M. 1:3 inside & outside to

exposed faces, R.C.C. top slab with 1:2:4 mix ( 1 cement:

Sand : 4 Grade stone aggregate 20mm size) ,Foundation

concrete 1:5:10 & fixing C.I. cover with frame to be not less

than 38 kg. On top etc. comp. for single pipe.

(A).Same as above but Precast RCC heavy duty Cover

instead of C.I. Cover 1.00 2915.61 Nos.

80 Providing & construction simple chamber of 23 cm. th' B.B.

Masonary in C.M 1:5 with cement plaster 15 mm th' in

C.M. 1:3 inside & outside to exposed faces, R.C.C. top

slab with 1:2:4 mix ( 1 cement: 2 Sand : 4 Grade

stone aggregate 20mm size) ,Foundation concrete 1:5:10

& fixing C.I. cover with frame to be not less than 38 kg.

On top etc. comp. Inside dimension,455 x

610 mm &450 mm deep for single pipe

(A) Same as above but Precast RCC heavy duty Cover

instead of C.I. Cover 1.00 2681.76 Nos.

81 Providing, Lowering & laying joining R.C.C. NP2 CLASS

Pipe In C.M. 1:1 of following nominal internal diameters

incl. Testing of pipes and joints etc. Comp (A) 150 mm.

82 Providing & Fixing in position PVC Cowl vent

to pipes of Prince/Supreme/Jain/Astral/Tulsi/Finolex

make etc.Comp. (A) 75 mm. dia.

Description Quantity Rate Per Amount

83 Providing & fixing M.S. Holder Bat clamps at all floor

levels of approved design to C.I. Or S.C.I pipes

including the cost of cutting holes & making good the

wall etc. Complete - 100 mm. dia. (M.R.) 50.00 30.00 Nos.

84 Providing & fixing S.S.towel rail of 600 mm long approved

make including, providing & fixing C.P. brass screws,

making holes in walls & making good. 4.00 1100.42 Nos.

Make- Cera F5015103CH,Jaquar 1111BSM ,HindWare

85 Providing & Fixing stainless steel recessed type Soap dish

of approved make. Including providing & fixing screws,

washers, cutting & making good the walls. 4.00 839.91 Nos.

Make- Cera F5007106, Jaquar ACN-1131N ,HindWare

86 Providing and fixing rebar of following diameter using

chemical grout of Swanchore/Hilti/Fischer or equivalent

make including cost of all equipments, tools, material,

labour, etc. Standard procedure as mentioned in

manufacturer's specifications shall be strictly followed,

which shall be submitted and got approved from the

authority prior to start of work. The rate shall also include

cost of drilling of hole of required diameter and depth

as mentioned in manufacturer's specification, cleaning the

hole with required air blower and other necessary tools

and tackles, positioning, providing and grouting chemical,

allied fixtures and fasteners, etc. but excluding the cost of

reinforcing bar etc. complete. Item includes necessary

scaffolding, staging, labour, tools and equipments, etc.

complete as directed by the engineer-in- charge.

PART-B (SCHOOL RENOVATION)

EXECUTIVE ENGINEER

NEW EAST (SARTHANA) ZONE

SURAT MUNICIPAL CORPORATION