Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.6 LAccepted-AOC | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹31.8 L+₹1.2 L (3.98%)Rejected-AOC | L2 | Rejected-AOC HIGHER | |
| 3 | L3₹32.2 L+₹1.6 L (5.09%)Rejected-AOC | L3 | Rejected-AOC HIGHER | |
| 4 | L4₹32.7 L+₹2.1 L (6.76%)Rejected-AOC | L4 | Rejected-AOC HIGHER | |
| 5 | L5₹34.4 L+₹3.8 L (12.5%)Rejected-AOC | L5 | Rejected-AOC HIGHER |
Tender Value
₹40.5 L
EMD Value
₹80,900
Closing Date
29 Sept 2023, 12:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EE RWD PITHORAGARH
EE RWD PITHORAGARH
Beautification work of the park in the temple of Vardayani Mandir, Pithoragarh.
2023_RES_63426_5
1461 dated 13.09.2023
Open Tender
Civil Works
Item Wise
180 days
PITHORAGARH
Please refer Tender documents.
1 document required · 1 mandatory
₹3,540
(e-challan) EE RWD PITHORAGARH
₹80,900
6 Dec 2023
14 Sept 2023
29 Sept 2023
14 Sept 2023
29 Sept 2023
14 Sept 2023
Amount
Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like Cement mortar 1:6 (1 cement : 6 coarse sand)
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.Granite work
Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.
40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand), including pointing with cement mortar 1:2 (1 cement : 2 stone dust) with an admixture of pigment to match the shade of stone.Red sand stone
Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab.
Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) :Red sand stone - exposed face fine dressed with rough backing.40 mm thick
Providing and laying factory made 60mm thick bilayered cement concrete tile 200x200x60 mm with 6mm top layer enriched with addmixure to make it abrasion and impact resistance with cobbles pattern cook and embrand empression on side tile work as paceu to maintain aap which are filled with sand al in laying to in drive way or light traffic parking area strength of M35 grade with approved column design and pattern laid over 50mm thick compacted bed of sand pattern in compeced by plate vibrator .
P/F G.F.R.C Wall tile over 12mm thick 1:3 c/s mortar and jointing with grey cement slurey providing jointing in white.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) :Raised and cut pointing
AMIT WALDIA
shri Dev Singh Lunthi
Harish Singh
sanjay kumar
MITESH BOHRA
M/s Prakash Engineering and Construction
BHAGWATI CONSTRUCTION
Har SIngh Waldiya
M/s Soun Construction
jeevan prasad kohli
stage.html
html • 0.07 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_76735.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .