NID-220- Renovation and Reapir of Balipatna IB.

Removing old lime or cement plaster from walls including racking out joints 12 mm deep and stacking the useful materials for re-use and removing the debris away from the work site with all leads, lifts and delifts and labour cess etc. complete in all respects as per direction of the Engineer-in charge.(Ground floor)

Removing old lime or cement plaster from walls including racking out joints 12 mm deep and stacking the useful materials for re-use and removing the debris away from the work site with all leads, lifts and delifts and labour cess etc. complete in all respects as per direction of the Engineer-in charge.(1st floor)

Dismantaling and removing old tiled flooring including removing the base coarse and stacking the useful materials for re-use and removing the debris away from the work site with all leads, lifts and delifts and labour cess etc. complete in all respects as per direction of the Engineer-in charge.

Dismantaling and removing old tiled clading from walls including racking out joints12 mm deep including stacking the useful materials for re-use and removing the debris away from the work site with all leads, lifts and delifts and labour cess etc. complete in all respects as per direction of the Engineer-in charge.

Dismantaling and removing doors,windows and ventilators including removal of frame,hinges,fastening and removing the debris away from the site with all leads, lifts and delifts and labour cess etc. complete in all respects as per direction of the Engineer-in charge.(Ground floor)

Dismantaling and removing doors,windows and ventilators including removal of frame,hinges,fastening and removing the debris away from the site with all leads, lifts and delifts and labour cess etc. complete in all respects as per direction of the Engineer-in charge.(1st floor)

Dismantaling and removing 2.50 cm thick grading concrete from roof slab cleaning the surface lowering and removing the debris including stacking the useful materials for re-use and removing the debris away from the work site with all leads and lifts including cost of all materials and complete finished in all respect as per direction of the the Engineer-in charge.(Ground floor)

Dismantaling and removing 2.50 cm thick grading concrete from roof slab cleaning the surface lowering and removing the debris including stacking the useful materials for re-use and removing the debris away from the work site with all leads and lifts including cost of all materials and complete finished in all respect as per direction of the the Engineer-in charge.(1st floor)

2.50cm. Thick grading with cement concrete (1:2:2) on roof slab using 6mm size hard granite crusher broken chips over new work with all cost,EMF, DMF,Additional charges, conveyance, royalty of materials and labour for the work etc.complete as per direction of the Engineer-in-charge.(Ground floor)

2.50cm. Thick grading with cement concrete (1:2:2) on roof slab using 6mm size hard granite crusher broken chips over new work with all cost,EMF, DMF,Additional charges, conveyance, royalty of materials and labour for the work etc.complete as per direction of the Engineer-in-charge.(1st floor)

16mm thick cement plaster in cement mortar (1:6) over the brick work including racking out joints with cost, EMF, DMF,Additional charges,conveyance, royalty and taxes of all materials and labour for the work ad curing etc.complete as per direction of the Engineer-in-charge.(Ground floor)

16mm thick cement plaster in cement mortar (1:6) over the brick work including racking out joints with cost, EMF, DMF,Additional charges,conveyance, royalty and taxes of all materials and labour for the work ad curing etc.complete as per direction of the Engineer-in-charge.1st floor)

Supplying , fitting and fixing vertified tiles in floor treades or steps and landing on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing including cost, EMF, DMF,Additional charges,conveyance, royalty, taxes, labour, T&P, cess etc.complete as per direction of the Engineer-in-charge.

Supplying , fitting and fixing vertified tiles in dados skirting and risers of steps on 12 mm thick bed of cement mortar 1:3 (1 cement : 3 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing including cost, EMF, DMF,Additional charges,conveyance, royalty, taxes, labour, T&P, cess etc.complete as per direction of the Engineer-in-charge.

Supplying , fitting and fixing marble tiles in floor treades or steps and landing on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing including cost, EMF, DMF,Additional charges,conveyance, royalty, taxes, labour, T&P, cess etc.complete as per direction of the Engineer-in-charge.(Ground floor)

Supplying , fitting and fixing marble tiles in floor treades or steps and landing on 25 mm thick bed of cement mortar 1:4 (1 cement : 4 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing including cost, EMF, DMF,Additional charges,conveyance, royalty, taxes, labour, T&P, cess etc.complete as per direction of the Engineer-in-charge.(1st floor)

Supplying , fitting and fixing marble tiles in dados skirting and risers of steps on 12 mm thick bed of cement mortar 1:3 (1 cement : 3 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing including cost, EMF, DMF,Additional charges,conveyance, royalty, taxes, labour, T&P, cess etc.complete as per direction of the Engineer-in-charge.(Ground floor)

Supplying , fitting and fixing marble tiles in dados skirting and risers of steps on 12 mm thick bed of cement mortar 1:3 (1 cement : 3 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing including cost, EMF, DMF,Additional charges,conveyance, royalty, taxes, labour, T&P, cess etc.complete as per direction of the Engineer-in-charge.(1st floor)

Supplying , fitting and fixing ceramic tiles in floor treades or steps and landing on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing including cost, conveyance, royalty, taxes, labour, T&P, cess etc.complete as per direction of the Engineer-in-charge.

Supplying , fitting and fixing ceramic tiles in dados skirting and risers of steps on 12 mm thick bed of cement mortar 1:3 (1 cement : 3 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing including cost,EMF, DMF,Additional charges, conveyance, royalty, taxes, labour, T&P, cess etc.complete as per direction of the Engineer-in-charge.

Finishing wall surface with cement based wall putty(water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding,staging charges with cost of all materials, labour, brushes, putty, T&P, cess etc.complete as per direction of the Engineer-in-charge.(Ground floor)

Finishing wall surface with cement based wall putty(water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding,staging charges with cost of all materials, labour, brushes, putty, T&P, cess etc.complete as per direction of the Engineer-in-charge.(1st floor)

Finishing plastered surfaces of walls with primer and making smooth to receive painting with cost of primer, labour, brushes, T&P, cess etc.complete as per direction of the Engineer-in-charge.(Ground floor)

Finishing plastered surfaces of walls with primer and making smooth to receive painting with cost of primer, labour, brushes, T&P, cess etc.complete as per direction of the Engineer-in-charge.(1st floor)

Finishing walls with plastic emulsion paint of approved shade on new work two coats to give an even shade with cost of emulsion paint, labour, brushes, T&P, cess etc.complete as per direction of the Engineer-in-charge.(Ground floor)

Finishing walls with plastic emulsion paint of approved shade on new work two coats to give an even shade with cost of emulsion paint, labour, brushes, T&P, cess etc.complete as per direction of the Engineer-in-charge.(1st floor)

Finishing walls with weather coat of approved shade over wall to give an even shade on new work two coats with cost of all materials, labour, brushes, T&P, cess etc.complete as per direction of the Engineer-in-charge.(Ground floor)

Finishing walls with weather coat of approved shade over wall to give an even shade on new work two coats with cost of all materials, labour, brushes, T&P, cess etc.complete as per direction of the Engineer-in-charge.(1st floor)

Supplying , fitting and fixing of M.S. Window grill made out of M.S flat, placing in position @ 35.135kg. Per Sqm including cost, conveyance, taxes etc.complete in all respect as per direction of the Engineer-in-charge.

Supplying , fitting and fixing of M.S. ventilator grill made out of M.S flat, placing in position @ 25kg. Per Sqm including cost, conveyance, taxes etc.complete in all respect as per direction of the Engineer-in-charge.

Supplying , fitting and fixing of M.S. Door grill made out of M.S flat, placing in position @ 25kg. Per Sqm including cost, conveyance, taxes etc.complete in all respect as per direction of the Engineer-in-charge.

Painting two coats with any approved paint over a coat of primer on new iron work including cost of all materials , labour, brushes etc. complete as per direction of the Engineer-in-charge.

Supplying , fitting and fixing of two track UPVC sliding window with window frame of approved make with 6 mm thick glass of approved quality complete with frame,shutters and all fittings and fixtures including all cost, conveyance, royalty, taxes, labour, T&P, cess etc.complete as per direction of the Engineer-in-charge.

Supplying the RCC Door/Window frames of specified size & dimension with help of M-250 concrete using OPC 43 grade cement, including all cost, EMF, DMF,Additional charges of materials and complete finished in all respect as per direction of the Engineer-in-charge.

Fitting & Fixing in proper position the RCC Door/Window frames of specified size & dimension with help of M-250 concrete using OPC 43 grade cement, including cost of all and complete finished in all respect as per direction of the Engineer-in-charge.

Providing, fitting & fixing of 32 mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1 mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures, etc complete as per direction of the Engineer-in-charge.

Providing fitting and fixing of false cealing with Aluminum anodised T section No. 3215 with 2-0" center to center. L section No.1705 up to 15 microne on 4 walls to be fixed by means of steel screws and PVC plug and the Aluminum. grid 2-0" x 2'-0" suspended from cealing etc complete as per direction of the Engineer-in-charge.

Supplying, fitting, fixing of stainless steel of 304 grade in hand railing using 50mm dia. Of 2mm thick circular pipe with balustrade of size 32mmx32mmx2mm @ 0.90m c/c and stainless square pipe braceng of size 32mmx32mmx2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost conveyance taxes of all materials, labour, T&P required for completion of the work in all reapect as per the direction of the Engineer-in-charge.

Clearing grass and removal ; rubbish up to a distance 50 Mtr. Outside disposal of unserviceable materials with all leads,lifts and delifts withcost of all labour T&P welfarecess etc.complete as per direction the Engineer-in-charge.

Supplying all materials, labour and T&P for cutting holes through existing brick work including making good to the same in cement mortar(1:4) for taking G.I. pipes and fittings/P.V.C. pipes and fittings all complete with EMF, DMF,Additional charges of materials as per specification etc.complete as per direction the Engineer-in-charge. 250 MM thick wall

Supplying all materials,labour and T&P for cutting holes in R.C.C. floors, roofs, or cornice including making good and leak proof to the damages for taking sand cast iron [SCI]/ centrifugally cast[spun] iron pipes pipes and fittings including mending good to the damages etc. all complete as per direction of the Engineer-in-charge.( RCC Roof/Cornice)

Providing and fixing to wall or ceiling and floor rigid PVC pipes conforming to ASTM-D-1785/89[Sch-80] and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer-in-charge. 25 mm. Diameter

Providing and fixing to wall or ceiling and floor rigid PVC pipes conforming to ASTM-D-1785/89[Sch-80] and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer-in-charge. 50 mm. Diameter

Supplying all materials, labour and T&P for cutting groves in pucca floor and walls for taking G.I. pipes and fittings /P.V.C. pipes and fittings and making good to the amages all complete as per specification and direction of the Engineer-in-charge.

Laying in trenches unplasticised PVC pipes conforming to IS:4985-2000 and specials of the following outside diameter for all classes including jointing with supply of approved solvent cement by non-heat application method including testing as per specification compelete and direction of the Engineer-in-charge. [Earth work in trenches to be measured and paid for separately] 110mm dia rigid UPVC pipe class-3 [0.60mpa]

Providing and fixing on wall face unplasticised rigid PVC soil waste and rain water pipes confirming to IS: 13592 Type A including jointing with seal ring confirming to IS:5382 leaving 10mm gape for thermal expantion [i] Single socket pipes etc.complete as per specification and direction of the Engineer-in-charge. 110mm dia

Supplying all materials, labour and T&P for fixing wash hand basin with hole for pillar taps confirming to IS 2556:part4-2004 with cast iron /M.S. brackets painted white including cutting holes in walls and making good to the damages etc. all complete as per specification and direction of the Engineer-in-charge.

Supplying all materials, labour and T&P for fixing corner wash hand basin with hole for pillar taps confirming to IS 2556:part4-2004 with cast iron /M.S. brackets painted white including cutting holes in walls and making good to the damages ete. all complete as per specification and direction of the Engineer-in-charge.

Supplying all materials, labour and T&P for Supplying all materials,labour and T&P for fixing wash down water closet (European type W.C.) with integral "S" or "p" trap tothe floor with wooden plug and chromium plated screw including jointing the trap with soil pipe in cement mortar (1:1) including all cost, etc, EMF, DMF,Additional charges all complete as per specification and direction of the Engineer-in-charge.

Supplying all materials, labour and T&P for fixing of PVC10.00 Itr capacity low level flushing cistern with manually controlled device[handle cover] confirming to IS 7231 with fittings and fixtures etc. all complete as per specification and direction of the Engineer-in-charge.

Supplying all materials, labour and T&P for fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffe all complete as per specification and direction of the Engineer-in-charge.

Supplying all materials, labour and T&P for fixing Pedestal for wash hand basin complete recessed at the back for the receiptionof pipe and fittings etc. all complete as per specification including cost of pedestal for wash basin and direction of the Engineer-in-charge.

Supplying fitting fixing of C.P Pillar Taps highpressure lettered Hot and cold with long screws shanks and back nuts of the following nominal bore as per specification and direction of the Engineer-in-charge.(Pillar cock 15mm dia)

Supplying all labour and T&P for fixing CP Angular stop cocks polished bright confirming to IS:781-1995 of the following nominal sizes as per specification all complete and direction of the Engineer-in-charge.

Supplying fitting fixing of C.P health foucet highpressure lettered Hot and cold with long screws shanks and back nuts of the following nominal bore as per specification and direction of the Engineer-in-charge.

Supplying all materials, labour and T&P for fixing CP Gratings of the following nominal diameter of outlet, of self cleaning design with sand cast iron screwed down or hinged grating with or without vent arm including cutting and making good to the walls and floors ete, all complete as per specification and direction of the Engineer-in-charge.

Supplying fitting fixing of CP waste of the following noninal diameter for wash hand basin and sink as per specification and direction of the Engineer-in-charge.

Supplying fitting fixing of 15mm dia PVC inlet connection pipe and making connectiion with piller cock and supply mains for wash basin complete as per specification and direction of the Engineer-in-charge.

Supplyingfitting fixing of PVC waste pipe of following nominal diameter of wash basin or sink inclusing brass check nut complete as per specification and direction of the Engineer-in-charge.

Supplying all materials, labour and T&P for fixing standard size glass self with chromium plated brass brackets and guard rails fixed to wooden plugs with chromium plated brass screws and washe etc. all complete as per specification and direction of the Engineer-in-charge.

Supplying all materials, labour and T&P for fixing of [A] liquid soap container -glass container or plastic container with chromium plated brass lid and brackets fixed to wooden plugs with chromium plated brass screws [B] cromium plated brass soap dish complete with chromium plated brass brackets fixed to wooden plugs with chromium plated brass screws [C] white glased tooth brush holder fixed to wooden plugs with chromiumplated brass screws as per specification and direction of the Engineer-in-charge.

Supplying all materials, labour and T&P for fixing of 600x450 bevelled edge mirror of superior glass mounted on 6mm thick ac sheet or ply wood sheet and fixed to wooden plugs with chromium plated brass screws and washe etc. All complete as per specification and direction of the Engineer-in-charge.

Supplying all materials, labour and T&P for fixing standard size C. P. towel ring fixed fixed to wooden plugs with cromium plated brass screws complete as per specification and direction of the Engineer-in-charge.

Supplying all labour and T&P for fixing Brass/Gunmetal full way valve confirming to IS:781-1995 of the following nominal sizes as per specification all complete and direction of the Engineer-in-charge. (25mm)

Supplying all labour and T&P for fixing Brass/Gunmetal full way valve confirming to IS:781-1995 of the following nominal sizes as per specification all complete and direction of the Engineer-in-charge. (50mm)

Providing and fixing on wall face unplasticised rigid PVC moulded fittings/accessories for unplastidsied rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring confirming to IS:5382 leaving 10mm gape for thermal expantion as per specification all complete and direction of the Engineer-in-charge. (87.5ºPlain Bend) 75 mm dia

Providing and fixing on wall face unplasticised rigid PVC moulded fittings/accessories for unplastidsied rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring confirming to IS:5382 leaving 10mm gape for thermal expantion as per specification all complete and direction of the Engineer-in-charge. (87.5ºPlain Bend) 110 mm dia

Providing and fixing on wall face unplasticised rigid PVC moulded fittings/accessories for unplastidsied rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring confirming to IS:5382 leaving 10mm gape for thermal expantion as per specification all complete and direction of the Engineer-in-charge. (87.5ºPlain Bend) 110 mm dia 90º Door Bend

Providing and fixing on wall face unplasticised rigid PVC moulded fittings/accessories for unplastidsied rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring confirming to IS:5382 leaving 10mm gape for thermal expantion as per specification all complete and direction of the Engineer-in-charge. (87.5ºPlain Bend) 110 mm dia Door"Y"

Providing and fixing on wall face unplasticised rigid PVC moulded fittings/accessories for unplastidsied rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring confirming to IS:5382 leaving 10mm gape for thermal expantion as per specification all complete and direction of the Engineer-in-charge. (87.5ºPlain Bend) 110 mm dia PVC Clip

Supplying all materials, labour and T&P for fixing stainless steel AISI 304 [18/8] Kitchen sink as per IS 13983 with cast iron bracet and stainless steel plug including painting of fittings and brackets, cutting and making good to the walls etc. all as per specification including cost of sink with all accessorie et. all complete as per direction of the Engineer-in-charge .

Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallie PVC flexible conduit with 5A 25 on MS box having front bakelite cover of suitable size, MS box with 1.5sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection including cost, conveyance, royalties, taxes of all materials, cost of labour, labour cess. T&P etc. required for the work complete as per the direction (Make of wire-Finolex/L&T/Anchor/Havells/V-Guard/Great White/HPL) of Engineer-in-Charge. Group-A

Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallie PVC flexible conduit with 5A 25 on MS box having front bakelite cover of suitable size, MS box with 1.5sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection including cost, conveyance, royalties, taxes of all materials, cost of labour, labour cess. T&P etc. required for the work complete as per the direction (Make of wire-Finolex/L&T/Anchor/Havells/V-Guard/Great White/HPL) of Engineer-in-Charge. Group-B

Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallie PVC flexible conduit with 5A 25 on MS box having front bakelite cover of suitable size, MS box with 1.5sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection including cost, conveyance, royalties, taxes of all materials, cost of labour, labour cess. T&P etc. required for the work complete as per the direction (Make of wire-Finolex/L&T/Anchor/Havells/V-Guard/Great White/HPL) of Engineer-in-Charge. Group-C

Supplying and fixing of 6 Amp plug with 6 Amp switch on existing board (Make-Legrand//Mylinc/ Schneider clipsal/Hager insysta/ Anchor Dura/ or equivalent) Including cost, conveyance, royalties, taxes of all materials, cost of labour, labour cess, T&P etc. required for the work complete as per the direction of Engineer-in-Charge.

Supplying, fitting and fixing of Multipurpose board consisting 3 nos 6 Amp plug and switch modular on metal box and modular cover with all connection (Make-Legrand//Myline/ Schneider clipsal/ Hager insysta/ Anchor Dura/ or equivalent) Including cost, conveyance, royalties, taxes of all materials, cost of labour, labour cess, T&P etc, required for the work complete as per the direction of Engineer-in-Charge.

Supplying, fitting & fixing of Different type of fan (Make-Crompton/Usha/Polycab/Orient/Havells/Khaitan,etc) including cost, conveyance, royalties, taxes of all materials, cost of labour, labour cess, T&P etc. required for the work complete as per the direction of Engineer-in-Charge. Exhaust Fan 12"

Supplying, fitting & fixing of Different type of fan (Make-Crompton/Usha/Polycab/Orient/Havells/Khaitan,etc) including cost, conveyance, royalties, taxes of all materials, cost of labour, labour cess, T&P etc. required for the work complete as per the direction of Engineer-in-Charge. Ceiling Fan

Supplying, fitting & fixing of different type of LED lights including cost, conveyance, royalties, taxes of all materials, cost of labour, labour cess, T&P ete. required for the work complete as per the direction of Engineer-in-Charge.(Make-Havells/Crompton/ Wipro/Panasonic/Philips) 20 Watt 4' LED tube lights

Supplying, fitting & fixing of different type of LED lights including cost, conveyance, royalties, taxes of all materials, cost of labour, labour cess, T&P ete. required for the work complete as per the direction of Engineer-in-Charge.(Make-Havells/Crompton/ Wipro/Panasonic/Philips) 18 Watt(234 mm Dia)

Supplying, fitting & fixing of different type of LED lights including cost, conveyance, royalties, taxes of all materials, cost of labour, labour cess, T&P ete. required for the work complete as per the direction of Engineer-in-Charge.(Make-Havells/Crompton/ Wipro/Panasonic/Philips) 3 Watt(75 mm x 75 mm )

Supplying, fitting & fixing of different type of LED lights including cost, conveyance, royalties, taxes of all materials, cost of labour, labour cess, T&P ete. required for the work complete as per the direction of Engineer-in-Charge.(Make-Havells/Crompton/ Wipro/Panasonic/Philips) 2 A LED Flexi strip (5 mtr) with Driver

Supplying, fitting & fixing of different type of LED lights including cost, conveyance, royalties, taxes of all materials, cost of labour, labour cess, T&P ete. required for the work complete as per the direction of Engineer-in-Charge.(Make-Havells/Crompton/ Wipro/Panasonic/Philips) 25 watt Gate Top light

Supply and fixing of LED street light(Make Havells/Cromption/Wipro/Panasonic/Philips) including all accessories and connection including cost, conveyance, royalties, taxes of all materials, cost of labour, labour cess, T&P etc. required for the work complete as per the direction of Engineer-in-Charge. 45 Watt LED street light

Supplying and fixing of following different DD DB BOX (make Havells/ C&S/ L&T) including cost, conveyance, royalties, taxes of all materials, cost of labour, labour cess, T&P etc. required for the work complete as per the direction of Engineer-in-Charge. 6way SPN DD DB BOX.

Supply and fixing of 6 Amp to 32A rating 240V/415V "C" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connection testing and commissioning etc. (make- havells/ C&S/ L&T) including cost, conveyance, royalties, taxes of all materials, cost of labour, labour cess, T&P etc. required for the work complete as per the direction of Engineer-in-Charge. 6 to 32 SP MCB

Recessed submain wiring alongwith earth wire with the following sizes of PVC insulated single core multistrand copper conductor ISI marked conforming to IS-694/1990 in 20mm dia non metallic heavy duty flexible conduit 1.6 mm in recessed PVC conduit as required including cost, conveyance, royalties, taxes of all materials, cost of labour, labour cess, T&P etc. required for the work complete as per the direction of Engineer-in-Charge (Make of wire -Finolex/L&T/Anchor/Havells/V-Guard/Great White/HPL) 2 X 2.5 Sq.mm +1 X 1.5 Sqmm

Recessed submain wiring alongwith earth wire with the following sizes of PVC insulated single core multistrand copper conductor ISI marked conforming to IS-694/1990 in 20mm dia non metallic heavy duty flexible conduit 1.6 mm in recessed PVC conduit as required including cost, conveyance, royalties, taxes of all materials, cost of labour, labour cess, T&P etc. required for the work complete as per the direction of Engineer-in-Charge (Make of wire -Finolex/L&T/Anchor/Havells/V-Guard/Great White/HPL) 2 X 4.0 Sq.mm +1 X 1.5 Sqmm

Recessed submain wiring alongwith earth wire with the following sizes of PVC insulated single core multistrand copper conductor ISI marked conforming to IS-694/1990 in 20mm dia non metallic heavy duty flexible conduit 1.6 mm in recessed PVC conduit as required including cost, conveyance, royalties, taxes of all materials, cost of labour, labour cess, T&P etc. required for the work complete as per the direction of Engineer-in-Charge (Make of wire -Finolex/L&T/Anchor/Havells/V-Guard/Great White/HPL) 2 X 6.0 Sq.mm +1 X 1.5 Sqmm

Supply and fixing copper plate earthing 600mm X 600mm X 3.15mm thick ISI marked including all accessories and providing masonary with charcoal and salt as required, including cost, conveyance, royalties, taxes of all materials, cost of labour, labour cess, T&P etc. required for the work complete as per the direction of Engineer-in-Charge.

Please Enable Macros to View BoQ information