Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹35.0 LAdmitted-Fee/PreQual/Technical/Finance | -5.12% | ₹35.0 L | L1 | Admitted-Fee/PreQual/Technical/Finance |
| 2 | L2₹36.2 L+₹1.1 L (3.28%)Admitted-Fee/PreQual/Technical/Finance | -2.01% | ₹36.2 L+₹1.1 L (3.28%) | L2 | Admitted-Fee/PreQual/Technical/Finance |
| 3 | L3₹37.6 L+₹2.6 L (7.50%)Admitted-Fee/PreQual/Technical/Finance NETAJI SUBASH ROAD AGARTALA WEST TRIPURA PIN 799001 | AGARTALA | WEST TRIPURA | TRIPURA | 799001 | +2.00% | ₹37.6 L+₹2.6 L (7.50%) | L3 | Admitted-Fee/PreQual/Technical/Finance |
Tender Value
₹36.9 L
EMD Value
₹73,821
Closing Date
5 Aug 2026, 3:00 pmClosed
EE, Agt. Divn.III, PWD(RandB)
O/O the EE, Agt. Divn.III, PWD(RandB)
SH_Fixing of APP (Atactic Polypropylene Polymer) sheet, PVC False Ceiling and other allied works of Pragna Bhavan (Dining hall, Hall_II and III) at Pandit Nehru complex, Gurkha Basti, Agartala.
2026_CEPWD_75099_1
29_SE_II__PWD_RandB_2026_27
Open Tender
Civil Works - Others
Percentage
90 days
Agartala
Please refer Tender documents.
5 documents required · 5 mandatory
₹1,000
₹73,821
5 Aug 2026
29 Jul 2026
5 Aug 2026
29 Jul 2026
5 Aug 2026
29 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1.1 | Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto-2°C when tested in accordance with ASTM, D- 5147 as per direction of the Engineer-in-Charge. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane as required as per direction of the Engineer-in-charge . 3 mm thick | 3,044.85 | Sqm. | 662.8 | ₹20,18,126.58 |
| 1.2 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge | 0.9 | Sqm. | - | - |
| 1.3 | Dismantling steel work in built up section in channels, angles, tees, flats including all gusset plates, bolts, nuts, cutting rivets, welding including dismembering and stacking of serviceable materials and unserviceable materials separately with all lifts and upto a lead of 50 m etc. complete as per direction of the Engineer- in-charge | 72.96 | Kg. | - | - |
| 1.4 | Dismantling old plaster or pointing, raking out joints, cleaning and preparing the surface for re-plastering or re-pointing including disposal of rubbish to the dumping ground with all leads and lifts etc.complete as per direction of the Engineer- in-Charge. | 208 | Sqm. | 30.1 | ₹6,260.8 |
| 1.5 | Plastering with cement mortar (1:4) 12mm thick on brickwork in substructure as per MoRD technical specification Clauses 613.4 & 1204. | 1,310.5 | Sqm. | 232.55 | ₹3,04,756.78 |
| 1.6 | Providing and fixing false Ceilling with SPUF142-D-01(different design 10 mm thick 150 mm wide and necessary Length)of approved Colour concealed type carrior T Section(DWUF 406:40*63.5mm & L Section(DWUF 405:40*48)With Necessary screws,Holdfast PVC beading & MS black Pipe structure 48 mm dia at 1200 mm centre to centre in/c cutting holes and making good the walls complete as per direction of the Engineer in Charge. | 599.4 | Sqm. | 1,941 | ₹11,63,435.4 |
| 1.7 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | 492.48 | Sqm. | 100.6 | ₹49,543.49 |
| 1.8 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications [Payment shall be made after submission of Test Certificate issued by the Manufacturer]: Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm | 829.45 | Sqm. | 153.8 | ₹1,27,569.41 |
| 1.9 | Painting with aluminium paint of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer]. Two or more coats on new work | 26.64 | Sqm. | 93 | ₹2,477.52 |
stage.html
html • 0.02 MB
finance_76452.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.35 MB
BOQ_76452.xls
BOQ • 0.23 MB
DNIeT.pdf
Tender Documents • 3.23 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .