Loading
Loading…
Loading…
Tender Value
₹67.0 L
EMD Value
₹1.3 L
Closing Date
27 Jul 2026, 11:00 amClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
ELECT G
15 conditions · 2 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Technical Eligibility Criteria: (a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b) (1)In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii)One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b)(2)In such cases, what constitutes a component in a composite work shall be clearly pre- defined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract. Note: for subletting of work costing up to Rs 50 lakh, no previous work experience of subcontractor shall be asked for by the Railway.
In case after award of contract or during execution of work it becomes necessary for contractor to change subcontractor, the same shall be done with subcontractor(s) fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract, with prior approval of Chief Engineer in writing. Note for Item 10.1: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Defination of Similar Work :- Any electrical engineering work, provided that the tenderer has electrical contractor's license for the voltage that is the highest in the complete work.
5 conditions · 1 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tenderers are requested to go through the following documents which are available in upload/View Documents in Home Page of IREPS portal for works tenders before submitting the e-tender. 1. General Instruction for E-Tenders on works contract--Chapter-l 2. Special Condition-General-Chapter-II
1. I/We have visited the works site and I/We am/are aware of the site conditions. 2. We have read the tender Notice[NIT] details, Tender document along with all the conditions attached/referred to, in this tender document, and agree to abide by the said conditions. 3. We are aware of the fact that the railway reserves the right to amend the scope and value of the contract and to reject[or accept] this offer without assigning any financial liability.
The Tender document uploaded as "Tender Document.pdf" should be read in conjunction with the terms and conditions and should read and followed before quoting the tender.
(A)DHN: -Improvement of Railway hospital at DHN. (B)Improvement of service building at GJD, DLW, NGY, BSCP, BNF under ADEN/GJD. (C)GMO: Ext. of building for 20 bed in RPF barrack at GMO including impr. of kitchen, dining hall, toilet & bathroom under ADEN/1/GMO.
EL-04-OPEN-2026-27
EL-04-OPEN-2026-27
Open
Works - General
12 Months
Dhanbad, Jharkhand
₹0
₹1.3 L
27 Jul 2026
2 Jul 2026
13 Jul 2026
205 items across 3 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 25,92,694.65 | ||
| — | 130.00 | — | — | ||
| Fixing, connection, testing & Supply of LED Batten, Box type luminaire, with CRCA body, Pre wired for LED tube with supply of Retrofit LED tubular lamp 1X20W,T-8, 4' long, complete with inbuilt LED driver, Make -Havells, Cromption, Bajaj , Philips, Surya, Orient & Policab) (Fixing of fitting to be done with proper clamping arrangement as per the site requirement and connection to be done with1.5 sqmm single core copper conductor by tapping from sub main line including supply of ceiling rose and wires and PVC flexiable pipe) ( The complete system of LED lights(including Driver etc) shall be guaranteed for satisfactorily performance and manufacturing defects for period of 60 months from the date of commissioning or 72 months from the date of suppply, whichever is earlier. (Reference: Railway Board's letter no.2006/Elect(G)/150/5 dated 27.03.15). | — | — | — | 1,23,055.4 | |
| — | 100.00 | — | — | ||
| Fixing, connection, testing & Supply o f round/square, Recess/surface mounted LED downlighter with Al.die-cast body, Edgelit Slim LED panel round fitting 24W with opal diffuser and separates electronic driver, luminaire efficacy 100lm/w. (Crompton, Havells, Bajaj, Polycab, Philips & Surya) (Fixing of fitting to be done as per the site requirement and connection to be done with1.5 sq.mm single core copper conductor by tapping from sub main line/celing rose) ( The complete system of LED lights (including Driver etc) shall be guaranteed for satisfactorily performance and manufacturing defects for period of 60 months from the date of commissioning or 72 months from the date of suppply, whichever is earlier.(Reference: Railway Board's letter no.2006/Elect(G)/150/5 dated 27.03.15). All fittings should be embossed/permanent sticker with warranty details (supplier/firm's name, LOA No. & Date etc.) at the time of supply. | — | — | — | 1,66,860 | |
| — | 150.00 | — | — | ||
| Fixing, connection, testing & Supply o f round/square, Recess/surface mounted LED downlighter with Al.die-cast body, Edgelit Slim LED panel round fitting 18W with opal diffuser and separates electronic driver, luminaire efficacy 100lm/w. (Havells, Cromption, Bajaj , Philips, Surya, orient & Policab) (Fixing of fitting to be done as per the site requirement and connection to be done with1.5 sq.mm single core copper conductor by tapping from sub main line/celing rose) | — | — | — | 1,86,564 | |
| — | 25.00 | — | — | ||
| Fixing, connection, testing & Supply of PROFESSIONAL LED STRIP 25W, 5 Mtr Length, IP 20, white, similar to Bajaj product code- 112501, Make - Havells, Cromption, Bajaj , Philips, Surya, orient & Policab | — | — | — | 25,887.5 | |
| — | 240.00 | — | — | ||
| Wiring of light point with PVC insulated, sheathed & stranded single core copper conductor( FRLS) 1.5mm2 with earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable (Wire Make-Havells, anchor, Finolex, Polycab ) in PVC pipe/Casing caping, surface/concealed with proper excavation and refilling the wall with proper plastering of the wall or as per the requirment at site with supply & fixing of switch, ceiling rose/angular batten holder etc. (make Havells, anchor,Legrand, Slemens, L&T,or C&S) | — | — | — | 46,891.2 | |
| — | 10.00 | — | — | ||
| Supply,& fixing of Metal body Exhaust Fans (non-capacitor type) No of poles -4 & sweep size 300 mm (Make-Usha,Havells/crompton, Bajaj, Policab ) ( fixing of exhaust fan to be done by cutting the hole of required size along with supply and grouting of required nut, bolt & waser to suit the Ex-fan as per site requirement, including connection. ) | — | — | — | 13,063.3 | |
| — | 20.00 | — | — | ||
| Fixing, connection, testing and Supply of Wall Bracket fan 400 mm sweep complete with all accessories Make: Bajaj, Crompton, Havells, Orient, Policab & Usha | — | — | — | 55,554.6 | |
| — | 30.00 | — | — | ||
| Supply & fixing of fan clamp made of MS flat and hook arrangement to take 20 Kg load (27 inch long). | — | — | — | 2,346 | |
| — | 56.00 | — | — | ||
| Wiring of C- Fan/Ex-Fan point with PVC insulated, sheathed & stranded single core copper conductor FRLS 1.5mm2 with earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable (Wire Make-Havells, anchor, Finolex, Polycab ) in PVC pipe/casing caping, surface/concealed with proper excavation and refilling the wall with proper plastering of the wall as per the requirement at site with supply & fixing of switch, ceiling rose, regulator .(make- Havells, anchor,Legrand, Slemens, L&T or C&S) | — | — | — | 16,304.4 | |
| — | 180.00 | — | — | ||
| Wiring of plug point with PVC insulated, sheathed & stranded single core copper conductor FRLS 1.5mm2 with earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable (Wire Make-Havells, anchor, Finolex, Polycab, Mescab & KEI) in PVC pipepipe/Casing caping, surface/concealed with proper excavation and refilling the wall with proper plastering of the wall or as per the requirment at site with supply & fixing of 5Amp plug & socket switch (make-Havells, Anchor, Legrand, L&T, Seimens or C&S) | — | — | — | 25,556.4 | |
| — | 50.00 | — | — | ||
| Wiring of power plug point 15 Amp with PVC insulated, sheathed and stranded single core, copper conductor FRLS 4mm2 with earthing the point with 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable (Wire Make-Havells, anchor, Finolex, Polycab, Mescab & KEI) as required in PVC pipe/casing caping, surface/concealed with proper excavation and refilling the wall or as per the requirment at site with supply & fixing of 15Amp Power Plug & Socket flush type, 5 in 1 including controlling switch.(make-Havells, Anchor, Legrand, L&T, Seimens or C&S) | — | — | — | 11,473.5 | |
| — | 2400.00 | — | — | ||
| Wiring of sub-Main Line with FRLS copper wire single core size 6mm2 multistrand with earthing wire 1 No. 1.5 sq. mm FRLS PVC insulated copper conductor single core cable as required in PVC pipe/casing caping, surface/concealed with proper excavation and refilling the wall with proper plastering or as per the requirement at site. (Wire Make-Havells,anchor, Finolex, Polycab, Mescab & KEI) | — | — | — | 1,41,840 | |
| — | 1500.00 | — | — | ||
| Wiring of Main Line with FRLS copper wire single core size 10 mm2 multistrand with earthing wire 1 No. 1.5 sq. mm FRLS PVC insulated copper conductor single core cable as required in PVC pipe/casing caping, surface/concealed with proper excavation and refilling the wall with proper plastering or as per the requirement at site. (Wire Make-Havells,anchor, Finolex, Polycab, Mescab & KEI) | — | — | — | 1,10,730 | |
| — | 400.00 | — | — | ||
| Wiring of Sub main concealed/surface(Normally concealed) in separate heavy gauge PVC conduit pipe 20mm size with single core PVC insulated multi strand copper conductor cable 2 nos of 4 sq.mm each for phase and neutral with earthing wire 1 No. 1.5 sq. mm. The colour coding of cable red for phase,black for neutral must be maintained . No other sub-main & point wiring will be drawn with this sub-main wiring in same PVC pipe. PVC pipe make - Polycab, Pressfit, Precision. Wire/cable make-Havells, Polycab, Finolex, Mescab | — | — | — | 39,152 | |
| — | 1000.00 | — | — | ||
| Wiring of Sub main concealed/surface(Normally concealed) in separate heavy gauge PVC conduit pipe 20mm size with single core PVC insulated multi strand copper conductor cable 1100 Volt confirming to IS:694/1990,2 nos of 2.5 sq.mm each for phase and neutral and 1 no. of 2.5 sq.mm for earth.The colour coding of cable red for phase,black for neutral and green for earth must be maintained . No other sub-main & point wiring will be drawn with this sub-main wiring in same PVC pipe. PVC pipe make - Polycab, Pressfit, Precision. Wire/cable make-Havells, Polycab, Finolex, Mescab | — | — | — | 1,18,130 | |
| — | 155.00 | — | — | ||
| Wiring of Sub main concealed/surface(Normally concealed) in separate heavy gauge PVC conduit pipe 40mm size with single core PVC insulated multi strand copper conductor cable 1100 Volt confirming to IS:694/1990,4 nos of 16 sq.mm each for 3-phase and neutral and 1no. of 16 sq.mm for earth.The colour coding of cable red,yellow,blue for phase,black for neutral and green for earth must be maintained . No other sub-main & point wiring will be drawn with this sub-main wiring in same PVC pipe. PVC pipe make - Polycab, Pressfit, Precision. Wire/cable make-Havells, Polycab, Finolex | — | — | — | 1,45,972.8 | |
| — | 10.00 | — | — | ||
| Supply & fixing of Busbar Chamber 4-way 100A (Make Havells/C&S/L&T) (Fixing with proper excavation and refilling the wall with proper re-plastering of the wall) | — | — | — | 83,820.7 | |
| — | 6.00 | — | — | ||
| Testing, commissioning, installation and supply of MCCB,100A, 35KA, four pole, with thermal magnetic release with suitable MCCB enclosure. Fixing to be done as per the site requirement under supervision of site incharge including connection with crimping of cable ends with aluminium lugs of required sizes (Make -Indo asian, C&S, Havells, L&T ,BCH or Legrand) | — | — | — | 66,509.82 | |
| — | 5.00 | — | — | ||
| Supply& fixing of Busbar Chamber, Current Rating 200A, 4-way, similar to Havells Cat: no: IHBB020004 (Make: Havells/Siemens/ Standards/L&T (Fixing with proper excavation and refilling the wall with proper re-plastering of the wall) | — | — | — | 41,146 | |
| — | 6.00 | — | — | ||
| Testing, commissioning, installation and supply of MCCB,200A, 35KA, four pole, with thermal magnetic release with suitable MCCB enclosure. Fixing to be done as per the site requirement under supervision of site incharge including connection with crimping of cable ends with aluminium lugs of required sizes (Make --Indo asian, C&S, Havells, L&T ,BCH or Legrand ) | — | — | — | 81,439.14 | |
| — | 1.00 | — | — | ||
| Testing, commisissioning, installation & Supply of Off load Change Over switch 800 A, 4 Pole . Fixing to be done as per the site requirement under supervision of site incharge including connection with crimping of cable ends with aluminium lugs of required sizes (make- HAVELLS,C&S,Standard or L&T.) | — | — | — | 51,569 | |
| — | 6.00 | — | — | ||
| Fixing, connection, testing & Supply of MCB Distribution Board 8-way (2-incomer ,6- outgoing),double door,IP-43-protection conforms to IS:8623-1&3, MCB 32A, DP, 10 KA, B-Curve, conforms to IS:60898 - 1 No as incoming, MCB 10A, DP, 10 KA, C-Curve, conforms to IS:60898 3 Nos as outgoing. Make - L&T, Havells, Legrand ,C&S, BCH (Fixing of Distribution Board to be done with proper clamping arrangement as per the site requirement and connection to be done with suitable conductor including supply of PVC flexiable pipe) | — | — | — | 21,031.2 | |
| — | 6.00 | — | — | ||
| Fixing, connection, testing & Supply of MCB Distribution Board 4-way 8+12 ,double door,IP-43-protection, with supply of MCB 63A, TPN, 10 KA, B-Curve, conforms to IS:60898 -02 Nos as incoming & MCB 20A, DP, 10 KA, B-Curve, conforms to IS:60898- 06 Nos as outgoing. Make - L&T, Havells, Legrand, Havells, C & S ,BCH (Fixing of Distribution Board to be done as per the site requirement (normally concealed) and connection to be done with suitable conductor including supply of PVC flexiable pipe) | — | — | — | 61,337.7 | |
| — | 15.00 | — | — | ||
| Installation, connection, testing and Supply of LED Street Light Fitting 72W+/- 5% similar to Havells model OMNIPLUS, made up of pressure die cast aluminium housing with high efficiency LEDs as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07. Light source - High efficiency long life LED module with SMD LED package mounted on MCPCB. Lumen efficacy of LED >140 lm/W. System Lumen Efficacy 110Lm/W, Electronic driver- Powered by integral, isolated electronic LED driver (SMPS based constant current supply) with lower THD, Output Open / Short Circuit protection, Over Voltage protection, Surge Voltage protection 10KV with SPD & other safety test as per IS 15885 Part-2/Sec 13. Warranty 5 years. (Make- Crompton, Havells, Bajaj, Polycab, Philips,Orient & Surya). Connection to be made with PVC insulated S/core stranded alum. FRLS Conductor 2.5mm2 with PG clamp of required size (including supply) | — | — | — | 79,976.55 | |
| — | 15.00 | — | — | ||
| Supply of Bend GI pipe of 30mm dia x 4ft long (to suit the street light fitting) as per site requirement and fixing the same on pole with supply of suitable clamp, nut, bolt and washer. | — | — | — | 5,455.65 | |
| — | 60.00 | — | — | ||
| Supply & fixing of Glow Sign Boards fitted with framing 24 SWG, 1 inch square MS pipe covered with GI plain sheet 30 SWG with Aluminium angle framing, including back lit flex and all electrical fittings & connection with different size boards as required. | — | — | — | 15,745.8 | |
| — | 500.00 | — | — | ||
| Supply & fixing of C-PVC pipe size 3/4 inch with elbow, saddle and other accessories | — | — | — | 55,730 | |
| — | 500.00 | — | — | ||
| Supply & fixing of C-PVC pipe size 1 .1/4 inch with elbow, saddle and other accessories | — | — | — | 1,00,000 | |
| — | 200.00 | — | — | ||
| Supply & fixing of copper pipe size-1/4 inch with kini foam cover | — | — | — | 16,148 | |
| — | 200.00 | — | — | ||
| Supply & fixing of copper pipe size-5/8 inch with kini foam cover | — | — | — | 33,076 | |
| — | 900.00 | — | — | ||
| ISI marked four core circular armoured cross linked polyethylene (XLPE) LT insulateed cable. PVC outer sheathed armoured with galvanised round steel wire or steel strip and with aluminium conducter suitable for rated voltage 1100 volts, grade conforming to IS:7098 [part-1]- 1988 with admt. no. 1,2 and 3 [reaffirmed 2005] size 4*25 sq. mm. The firm will have to submit type test report as per IS from NABl accredited lab alongwith the tender. Type test report should not be more than 10 years old on the date of bid opening. | — | — | — | 1,39,491 | |
| — | 500.00 | — | — | ||
| ISI marked four core circular armoured cross linked polyethylene (XLPE) LT insulateed cable. PVC outer sheathed armoured with galvanised round steel wire or steel strip and with aluminium conducter suitable for rated voltage 1100 volts, grade conforming to IS:7098 [part-1]- 1988 with admt. no. 1,2 and 3 [reaffirmed 2005] size 4*50 sq. mm. The firm will have to submit type test report as per IS from NABl accredited lab alongwith the tender. Type test report should not be more than 10 years old on the date of bid opening. | — | — | — | 1,28,000 | |
| — | 400.00 | — | — | ||
| ISI marked four core circular armoured cross linked polyethylene (XLPE) LT insulateed cable. PVC outer sheathed armoured with galvanised round steel wire or steel strip and with aluminium conducter suitable for rated voltage 1100 volts, grade conforming to IS:7098 [part-1]- 1988 with admt. no. 1,2 and 3 [reaffirmed 2005] size 4*120 sq. mm. The firm will have to submit type test report as per IS from NABl accredited lab alongwith the tender. Type test report should not be more than 10 years old on the date of bid opening. | — | — | — | 2,01,600 | |
| — | 1600.00 | — | — | ||
| Trenching, laying and back filling of XLPE cable as per Sr.DEE(G)/DHN's drg. No. EL/486-01 | — | — | — | 96,896 | |
| — | 5.00 | — | — | ||
| Provision (Supply and erection) of Earthing station (RI-7021) as per Drg.No. ETI/ OHE/P/ 7020 or latest (The price shall cover supply and erection of an earth electrode (RI 7021) as per drawing no. ETI/OHE/P/7020. The price shall also cover the provision of a protective concrete Box with removable MS cover. The material should confirm to ACTM vol. II Part II Para 7.1.1 with figure A 3.01. The price shall cover the testing of earth value and painting the value on the earth pit. The earth electrode shall normally be of mild steel galvanized perforated pipe of not less than 44 mm nominal bore and about 3 meter length provided with a spike at one end and welded lug suitable for connecting directly Earth wire/MS flat of required size at other end. The connection of Earth wire/M S flats to each electrode shall be made through M S links by bolted joints, fasteners to be supplied by the contractor. The earth surrounding the electrode shall be chemically treated by alternate layers of fine charcoal and salt at least 150 mm all around. The item should be procured from approved supplier of CORE or RDSO, duly inspected by either RITES or Railway Representative deputed by Sr. Div. Elect.Engineer (G)/ Dhanbad.) | — | — | — | 15,305.25 | |
| — | 200.00 | — | — | ||
| Erection of Guard wire , including supply of GI wire having 02 nos, bearer wires of 4/6 SWG (GI) and provision of lacings with 8-SWG(GI), 1st lacing from the support structure being at 1- Mtr and subsequent lacings at 4- meter apart. | — | — | — | 15,418 | |
| — | 4.00 | — | — | ||
| Supply & erection of stay assembly 6 ft long 3/4" dia including anchor plate (Size 15"x15"x3/16" guy wire rope with cement concrete foundatiion of ratio 1:3:6 including fixing of the complete set | — | — | — | 2,770.88 | |
| — | 100.00 | — | — | ||
| Supply and Erection of 75mm x90mm LT Shackle Insulator with GI bolt, nuts and straps etc. as required. | — | — | — | 17,100 | |
| — | 18.00 | — | — | ||
| Supply, fixing & wiring of 6 pin 5/ 6A & 15/16 A modular switch socket & fuse point in concealed/surface (Normaly concealed) in heavy gauge PVC conduit pipe as per IS 9537 with PVC insulated, 1100 volt voltage grade, (FRLS), multistrand copper conductor wire on separate circuit and suitable board and wiring using 2x4 sq.mm for phase and neutral & 1 x 1.5 sq.mm for earth conforming to IS: 694 (Wire Make-Havells, anchor, Finolex, Polycab,Greatwhite) from MDB/SDB/Board to this separate board controlling through flush type 15/16 AMP modular switch to be fitted with suitable GI/ PVC frame and tress plate. Make: Havells, anchor, Legrand, Slemens, L&T,or C&S. All material required for the job shall be supplied by contractor, Proper colour coding as per IE rules should be followed for wiring. | — | — | — | 5,659.92 | |
| — | 38.00 | — | — |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCCApril-2022.pdf
ATTACHMENT
GCCCorrectionslip1to11_compressed.pdf
ATTACHMENT
LED_Indoor_lighting_specifications_EOI.pdf LED Indoor Light
ATTACHMENT
LEDstreetlight.pdf
ATTACHMENT
Tenderdocument1.pdf
ATTACHMENT
LED_Indoor_lighting_specifications_EOI.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .