REPAIRS TO CERTAIN B/R WORKS AT MD ACCN AT NORTH OF RAILWAY LINE MISSAMARI UNDER GE MISAMARI

Amount

Taking down Chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frames)

Taking down Chowkats or frames exceeding 1.5 Sq. M but not exceeding 4 Sq. M each (Without taking off shutters from the frame)

Dismantling fillets, rails, posts, rafters, purlins etc. under 40 Sq. cm in section.

S&F second class hard wood plain fillets in rectangular or triangular in section, clean swan secured with screws or beads sectional area exc.13sq cm but n.exc.25 sq cm complete all as specified and as directed.

S & F facroty made Second class hard wood kiln seasoned and chemically pressure treated plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints.

S&F 35 mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides.

S & F 35 mm thick factory made Second class hard wood kiln seasoned and chemically pressure treated Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc.

S & F Solid PVC Door Frame of size 100mmx45 mm made out of 5mm wood grain colour PVC Sheet reinforced with MS Square etc.

Supplying and fixing in frame at site, factory made solid panel PVC moulded door shutter 28 to 30 mm thick (style) with 2,4,or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing.

S&F anodised aluminium frame for doors, windows, ventileters with one or more rebates including joining cleat for fixing etc complete all as specified including powder coating above aluminium section.(minimum thickness of powder coating 50 micron).

S&F anodised aluminium door shutters aluminium section weighing 0.55 kg/m including necessary joining cleats glazing clips rubber neoprene packing anodised aluminium snap beading screws etc complete all as specifid power coating of any colour(thickness of power coating not less than 50 micron.

S&F for anodised window shutters, side hung type without sash bars aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips,ruber neoprene packing,anodised aluminium snap beading screws,anodised aluminium fittings such as peg stays 150 mm long(1 no),hinges type-B-21 100 mm long( 2 no) suitable handle 1 no complete all as specified including powder coating of any colour (thick ness of powder coating not less than 50 micron).

M&L for Plain Cement Concrete Type B1 1:2:4 (using 20 mm graded granite stone aggregate) as in hold fast.

S&F mild steel flat iron of size 50x3mm as in hold fast

Hacking out old broken glass ( any thick ness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and provoding and fixing new ones

S & F 3 mm thick Sheet glass, ordinary quality and glazing with wooden beads in squares not exceeding 0.5 Sqm in each pane

Supply and fix in repair GI wire cloth with 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium stapple complete all as specified and directed.

Supply and fix GI wire cloth with 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium stapple complete all as specified and directed.

S & F 100 mm long medium weight, cold rolled mild steel Butt hinges and fixed.

S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised.

S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section

S & F 300 mm long MS sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts .

Supply and fix in repairs Harrison rails, mild steel, chromium plated fixed alongwith 2 Nos. of brackets, stops, rollers etc, complete all as specified.

Dismantling floor, hearth or wall tiling incuilding cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises.

M&L for Glazed ceramic coloured tiles in vertical surfaces 450x 350x 7 mm thick set and jointed in neat cement slurry & painted in white or colour cement to match including screed bed 10 mm thick in CM 1:4 .

M&L for non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured including Screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying floor finishes.

M&L for non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured including Screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying floor finishes.

Demolition of stone slabs tiles of any description or thickness in floors aprons laid bedded and pointed in any morter etc

M&L for granite of any type 20 mm thick machine cut bedded and jointed with grey cement slurry and pointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete including 20 mm thick screed bed in cement mortar 1:6 in floors.

All as per item No 29 but fixed in vertical surfaces of wall but 10 mm thick screed bed in cement mortar 1:4.

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc.

Demolition of brick work or stone/ boulder masonry built in cement mortar or cement lime mortar including removal to rubbish complete all as specified and as directed.

M&L for brick work with burnt modular bricks built in cement mortar 1:6 straight or curved on plan exceeding 6mtr mean radius and all as directed.

M&L for 15mm thick plaster on fair faces of brick work or concrete surface in cement mortar (1:4) with WPC @2% by weight face of concrete work to wall surface and the surface is finished even and smooth without using extra cement

M&L for rendering 15mm thick on other than fair faces of brick or concrete Surfaces in cement mortar 1:6 finished even and smooth.

Supply only Integral water proofing compound

Dismantling plain or corrugated steel sheeting any gauge, thickness in roof covering.

S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified.

S&F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets.

S&F anodised aluminium/ GI snap grid power coated framed work of size main runner 39x24.70x0.80 mm, cross tee size 29.x24.70x0.80 mm, wall angle 22.2x22.2x0.65 mm and size of grid 605x605 mm for false ceiling all as specified with 4mm thick GI suspender complete all as specified and as directed.

M & L for 4m thick Non Asbestos designed Cement E board including two coats of distempering in one side as approved by GE of size fixed in ceiling as specified and directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for Refixing or removal to store

Taking up or down 20 mm bore steel tubing and connections, including cleaning for Refixing or removal to store

Supply and laying 20 mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supply and laying 25 mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S&F in repairs 15mm bore angular stop cock CP screwed down high pressure with crutch or butter fly handdle screwed both end for iron pipe complete. Make-Jaquar-Code-CON-059KN or equivalent as approved by GE.

S&F in repairs 15mm bore piller tap fancy type castcopper alloy with capstin head CP screwed down high pressure with or without littered 'H' or 'C' with long screwed shank and fly nuts screwed for iron pipe etc complete. Make-Jaquar Code-OPP-15001PM or equivalent as approved by GE.

S&F in repairs 15mm bore bib cock with wall flange copper alloy screwed down high pressure with crutch or butter fly handdle screwed both end for iron pipe complete. Make-Jaquar-Code-CON-047KN or equivalent as approved by GE.

S & F in repairs cromimum plated health faucet shower with CP flexible pipe up 15 mm bore (ABS Body) with 1 mtr long Easy Flex tube in chrome finish complete all as directed. Make-Jaquar-Code-ALD-CHR-585 or equivalent as approved by GE.

S&F in repairs chromium plated tubular towel rail,15 mm dia D type 60 cm long between flanges all as directed. Make -Jaquar code-CAN-1111NM or equivalent as approved by GE.

S&F in repairs CP towel ring squre all as directed. Make : Jaguar code-CAN-1121N or equivalent as approved by GE..

S&F in repairs soap dish holder fixed to plugs with chromium plated brass screws all as directed. Make- Jaquar(code-AKP-35731P) or equivalent as approved by GE.

S&F in repairs Corner glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chomium plated bracket guard & railing 45 cm long all as directed. Make - Jaquar Code-ACN-1173 or equivalent as approved by GE.

S&F in repairs 15 mm bore brass CP mixer for mixing hot & cold water (Exposed Straight legs) with telephonic shower arrangement & Crutch (without hand shower and hoses)arrangement screwed down for iron pipe & fixed alla s directed. Make-Jaquar -Code-CQT-23281UPR or equivalent as approved by GE.

S&F in repairs 32 mm bore CP waste coupling (half/full threaded) all as directed Make- Jaquar- Code-ALD-705 or equivalent as approved by GE.

S&F in repairs 32 mm bore CP bottle trap having minimum water seal of 25 mm fixed all as directed. Make-Jaquar- Code-ALD-769L or equivalent as approved by GE.

S&F in repairs CP toilet paper roll holder with flap incl all necessary fittings. Make-Jaquar(Code-ACN-1153N) or equivalent as approved by GE.

S & F in repairs of viterious china wash down water couple closet size 760x640x370 mm tap distance S-220 mm. .including making good to floor including seat cover. Make-Jaquar-code-FNS-WHT-40201 or equivalent as approved by GE.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaceProviding and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and as directed.

Complete removal of old surface and Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaceProviding and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and as directed.

M&L for providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth and applying one coat of primer and distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work complete all as specified and as directed.

M&L for Complete removal of old surface and Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth and applying one coat of primer and distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work complete all as specified and as directed.

M&L for preparation of new surfaces of walls by brooming down or by steel wire brushing and applying three coats of white wash.

M&L for preparation of old surfaces of walls by brooming down or by steel wire brushing and applying one coat of cement base paint.

M&L for preparation of new or previously treated wood surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of pink primer.

M&L for preparation of old painted wood surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint.

M&L for preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described appling one coat of synthetic enamel paint.

R D ENTERPRISE

Markson

RC Madan

MAJUMDER ENTERPRISE