SPECIAL REPAIRS TO ORs MD ACCN BLOCK NO P 151 1 TO 6 AND P 152 1 TO 6 AT GAJRAJ COMPLEX UNDER GE SOUTH AMBALA CANTT

Amount

SCHEDULE A PART I (B/R WORKS) Taking down cement or cement lime plaster, of any description, on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, including removal of debries to distance to distance exc 50 mtr but n exc 100 mtr complete all as specified and as directed.

Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4, finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6, finished fair and even complete all as specified and as directed.

Material and labour for rendering, 5 mm thick, in cement mortar 1:3, on fair faces of brick work or concrete surfaces of ceiling, finished fair and even complete all as specified and directed.

Material and labour for preparation of old plastered wall surfaces and applying one coat of exterior acrylic emulsion paint complete all as specified and directed.

Material and labour for preperation of new plastered or unplastered surfaces of walls and applying two coats of oil bound distemper white or tinted complete all as specified and as directed.

Material and labour for preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

Material and labour for preperation of old plastered or unplastered surfaces of walls and applying coat of oil bound distemper white or tinted complete all as specified and as directed.

Material and labour for preparation of old plastered or unplastered surfaces of ceiling and applying two coats of white wash complete all as specified and as directed.

Material and labour for preparation of old plastered wall surfaces and applying two coats of cement base paint complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description, in ground floor and pavings not exceeding 15 cm thickness (below or above ground level) including removal of debries to distance to distance exc 50 mtr but n exc 100 mtr complete all as specified and as directed.

Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc, including stacking of servisable bricks including removal of debries to distance to distance exc 50 mtr but n exc 100 mtr complete all as specified and as directed.

Material and labour for brickwork, with old size bricks, straight or curved on plan to any radius, exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and as directed.

All as above Item No 13 but except bricks complete all as specified and as directed. Note: Old serviceable bricks as obtained from serial item No 12 hereinbefore shall be reused after cleaning the bricks. The rate quoted shall include for cleaning the bricks also.

Demolition of reinforced cement concrete of any description and in any position including reinforcement cut as required to facilitate demolition including removal of debries to distance to distance exc 50 mtr but n exc 100 mtr complete all as specified and as directed.

Material and labour for RCC M-25 design mix using graded crushed stone aggregates, in slabs supported on walls, beams and colunms in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Material and labour for providing and laying 3mm thick APP(atactic polypropylene polymer) modified prefabricated, five layer, weight not less than 3.60 kg/Sqm, water proofing membrane, black finish, reinforced with non woven polyster matt, make as approved, with termofusable finish laid by force aopplication after applying a coat bitumious primer @ 0.40 ltr/ Sqm by the same membrane manufacturer of density 0.87 to 0.89 kg/ltr at 25' C temprature and viscosity 70-160 cps over the primer coat with overlap of 100mm at the sides and 150mm at the end, ceiling including a tack coat of hot blown bitumen 85/25 @ 1.2Kg per Sqm below APP and two coats of water proofing paint with aluminium finish on top of laid APP surfaces including preparation of surface complete all as specified and directed. The vital physical and chemical parameters of the membrane shall be as under :- (i) The layer membrane shall be laid using butane gas torch and sealing all joints etc after preparing the surface complete as per standard practice all as per manufacture's instuctions (ii) Joint strength in logitudinal and transverse direction at 23'Cat 650/450 N/5 cms (iii) Tear strength in logitudinal and transverse 150'C when tested in accordance with ASTM (d-5147) (iv) The laying of membrane shall be got down through the authorised applicator of manufactures of membrane only. Note:- The contractor will carry out ponding test after application of APP treatment before claiming payment.

Material and labour for rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (lleam, tee, angle, charmel or flat sections) including distance pieces, cleats etc. including necassary cutting, drilling, welding, conforming to Fe-410-W (Gde-E-250) quality-A, complete all as specified and directed.

Material and labour for RCC M-25 design mix using graded crushed stone aggregates, in beams, cantilevers, bressulluners, lintels over l.5m span complete all as specified and directed.

Material and labour for use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished flat surfaces of concrete complete specified and directed.

Material and labour for use and waste of formwork to sides and soffits of floor or roof beams, bean, haunchings, girders, bressummers, lintels, cantilevers, shelves including supportsl overhangs, etc. also splays between floors and beams, etc. for rough finished flat surfaces of concrete complete all as specified and directed.

Material and labour for mild steel TMT bars Fe 500/550D, 10mm dia and over, as in reinforcement, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Material and labour for mild steel TMT bars Fe 500/550D, 6 to 8mm dia, as in reinforcement, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Material and labour for machine cut kota stone slab 16-18 mm thick, laid in treads of steps with bull nosed edges, over and including cement screed bed 10mm thick in cement mortar (1:4) base and jointed & pointed with grey cement slurry mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing (Granite finish) complete all as specified and directed.

Material and labour for machine cut kota stone slab 16-18 mm thick laid on verticle surface or skirting/dado/pillar over and including 10mm thick plaster in cement mortar (1:3) on brick work or concrete surfaces and jointed & pointed with grey cement slurry mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing (Granite finish) complete all as specified and directed. Note:- Size of slab shall be cut as required.

Material and labour for premium quality, joint free, non skid coloured ceramic tiles (Square/rectangular), area of each tile exceeding 0.06 sqm and not exceeding 0.11 sqm and 7 to 8 mm thick, laid in vertical surfaces such as skirting, dado, riser to steps etc. over and including rendering 10mm thick in cement mortar (1:4) and set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in white or coloured cement to match the surface complete all as specified and directed.

Material and labour for premium quality, joint free, non skid coloured ceramic tiles (Square/rectangular), area of each tile exceeding 0.18 sqm and not exceeding 0.38 sqm and 7 to 8 mm thick, laid in floors over and including cement screed bed 15mm thick in cement mortar (1:4) and set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in white or coloured cement to match the surface complete all as specified and directed.

Material and labour for premium quality, joint free, non skid coloured ceramic tiles (Square/rectangular), area of each tile exceeding 0.18 sqm and not exceeding 0.38 sqm and 7 to 8 mm thick, laid in vertical surfaces such as skirting, dado, riser to steps etc. over and including rendering 10mm thick in cement mortar (1:4) and set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in white or coloured cement to match the surface complete all as specified and directed.

Material and labour for premium quality, joint free, printed glazed coloured ceramic tiles of size 300x450x7mm thick on vertical surfaces of walls such as skirting, dado, riser to steps etc. over and including 10mm thick rough finished plaster in cement mortar (1:4), set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in white or coloured cement to match the surface complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing selviceable tiles to store and rubbish off the defence land remises including removal of debries to distance to distance exc 50 mtr but n exc 100 mtr complete all as specified and as directed.

Material and labour for granite tile or slab (of any type), 16-18mm thick, machine cut and machine polished and moulded as in steps, jambs, pillar, counter WHB, floor, window cill etc laid over and including 10mm thick rendering in cement mortar (1:4) and jointed with grey cement slurry and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Material and labour for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

Material and labour for writing letters or figures (Block, Roman, Italic or Indian) not exceeding 30 cm high complete all as specified and directed.

Material and labour for providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 Iitres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified and directed. Note: The work shall be got done from approved applicators

Material and labour for PCC (1:4:8), type D2 using 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

Material and labour for PCC (1:2:4) type B2, using 40mm graded stone aggregates, as in surface channels and drains finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for precast reinforced cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregates, in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and setting in mortar cement mortar (1:4) with joints to match complete all as specified and directed.

Material and labour for PCC 1:2:4 type B1 (using 20 mm graded mechanically crushed stone aggregate), 50mm thick, as in plinth protection/PCC path and paving, laid in panels of area not exceeding 1.20 sqm with 12mm wide joints filled with mastic (using bitumen and sand mixture applied hot in the ratio of 1:3 by weight) formed at the end of each panel and change in direction of plinth protection/PCC Path and paving and finishing the top surface even and smooth without using extra cement complete all as specified and as directed.

Material and labour for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mitred/ stopped ends etc, complete all as specified and as directed.

Material and labour for PCC 1:2:4, type B1 (using 20 mm graded mechanically crushed stone aggregate), in lintels upto 1.5m clear span cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed

Taking down chowkats or frames with shutter, area not exceeding 1.50 Square metre (w/o taking off shutters from frames) and removing from site, including cutting holes in wall/concrete for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces in CM (1:3) and finishing the surfaces to match with existing finish complete all as specified and directed.

Taking down chowkats or frames with shutter, area exceeding 1.50 Square metre and not exceeding 4.00 Square metre (without taking off shutters from frame) and removing from site, including cutting holes in wall/concrete for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces in CM (1:3) and finishing the surfaces to match with existing finish complete all as specified and directed.

Material and labour for factory made second class hard wood, 40mm thick, plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Material and labour for second class hard wood glazed and skeleton shutters, 35mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, elc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats

Supply and fixing of sheet glass, 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5 sqm. in each pane complete all as specified and directed.

Supply and fixing of figured glass, 4mm thick, pin head type and glazing with oil putty in squares not exceeding 0.5 sq. m in each pane complete all as specified and directed.

Supply and fixing of stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

Material and labour for mild steel sections in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles including providing a shop coat of zinc chromate primer conforming to Fe-290 Gde-E-165 complete all as specified and directed.

Material and labour for preparing surfaces of wood and wood based materials,steel and iron work/new or old, of any description and girth, not otherwise described, and treating ends of posts, backs of chowkats, etc., with tar or coal lar black paint area tarred exceeding 0.1 sq. m but not exceeding 0.5 Sq. m each complete all as specified and as directed.

Material and labour for preparation of new or previously untreated steel surfaces, of any description not otherwise described, over 10 cm width or girth and applying two coats of approved colour synthetic enamel paint, over a coat of red oxide zinc chrome primer complete all as specified and as directed.

Material and labour for preparation of new or previously untreated steel surfaces, of any description not otherwise described, over 10 cm width or girth and applying two coats of approved colour synthetic enamel paint, complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description any position not otherwise specifically provided for including removal of debries to distance to distance exc 50 mtr but n exc 100 mtr complete all as specified and as directed.

Supply and fixing of pressed steel frames for doors of size 125x60mm, 1mm thick, with one or more rebates including, hold fasts of 25mm x 4mm FI, 25mm long, 6 Nos in each chowkhat, necessary lugs, 4 Nos 100 mm mild steel butt hinges medium weight, cold rolled, welded for each frame, lock strike plate, including sanding, tarring backs of chowkhats, PCC 1:3:6 type C-0 filling in frame and for holdfast, 2 Nos 12 mm dia tie bars at the bottom of frame and one shop coat of red oxide primer etc complete all as specified and as directed.

Supply and fixing of mild steel almirah shutters with frame, exceeding 1.5 Square metre, made of 1mm thick mild steel sheet, in two leaves, as built in furniture in cupboards, including locking arrangement with mortice lock of mild steel, vertical type, 65mm size, 2 lever, ISI marked with duplicate keys and handle, etc. (all as per Godrej pattern) including two coats of approved colour synthetic enamel spray painting over a coat of red oxide primer complete fixed in brick or concrete wall with minimum six numbers of 10mm dia and 100mm long mild steel bolt with washer and nut in cement mortar (1:4) or PCC 1:2:4, type B-0 complete all as specified and directed.

Supply and fixing of steel window box type, using ERW hollow 'P' section, factory made, comprising double frame for and including gauged and glazed skeleton shutter, 30mm thick, jointed internally with flat iron 25x3mm complete including hinges, handle, tower bolts, stops, lugs etc. all as shown on drawing No. TD-219 sheet 1/3 to 3/3 of HQ CE Chandigarh Zone as applicable complete all as specified and as directed. Note: (i) For the purpose of measurement and payment double shutter both glazed and gauzed with frame shall be considered as one unit. (ii) Unit rate quoted against this item shall also include the iron mongery and grill 10 mm square bar irrespective of whatever shown on drawings and one shop coat of zinc chromate primer . The pattern of grill shall be all as shown on drawing (iii) Glazing, wire mesh and painting shall be measured and paid for separately. (iv) The drawings may be referred from GE office or from this office during working hours.

Supply and fixing of factory made solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm prelam PVC Sheet on back face supplying & fixing in frame at site as per specification & drawing specified in MES SSR Part II 2010, complete all as specified and directed.

Supply and fixing of solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

Supply and fixing of aluminium anodised, 150mm long, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

Supply and fixing of mild steel sliding door bolts, 250mm long, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.

Supply and fixing of mild steel, cold rolled, butt hinges, 100mm size, medium weight, ISI marked and fixed complete all as specified and as directed.

Supply and fixing of mild steel, 300mm long, ordinary rat tail rod pattern springs for door including roller and roller plate, ISI marked complete all as specified and as directed.

Supply and fixing in replacement of extruded aluminium alloy handles, 125 mm long, fabricated type, anodised, ISI Marked complete, all as specified and as directed.

Supply and fixing of harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and directed.

Material and labour for aluminium anodised, tubular towel rail, 20mm dia, 'D' type, 60cm long between flanges complete all as specified and as directed.

Material and labour for Floor door stopper of aiuminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor with overall length of cover plate 150mm complete all as specified and as directed.

Supply and fixing in replacement, stainless steel sink with draining board, made out of 1mm thick sheet of grade SS 304, for kitchen or laboratory with plug, washers, waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mmx330mmx160mm including waste pipe and waste fittings, brass, chromium plated for glazed ware sinks, basins etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

Supply and fixing in replacement of stainless steel plate rack made of 1mm thick sheet of grade SS 304, of size 750 x 600 x 200mm, weighing not less than 7.5 Kg each and fixed with stainless steel screws to wall complete all as specified and directed.

Supply and fixing of GI tubing, ISI Marked, 15mm bore, medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors including taking down old pipe with fittings complete all as specified and as directed.

Supply and fixing of GI tubing, ISI Marked, 20mm bore, medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors including taking down old pipe with fittings complete all as specified and as directed.

Refixing old steel tubing 15mm bore and connections in new or old position (Walls. ceiling, floors, etc.) including S&F of new fittings as required at site including taking down old pipe with fittings complete all as specified and as directed.

Refixing old steel tubing 20mm bore and connections in new or old position (Walls. ceiling, floors, etc.) including S&F of new fittings as required at site including taking down old pipe with fittings complete all as specified and as directed.

Dismantling overhead water tanks, of any description, of capacity exceeding 250 litres and not exceeding 500 litres and removing to store and supply and fixing of water storage tank of 500 ltr capacity, HDPE triple layer, cylindrical, vertical with closed top and FDA approved, 100% UA stabilized, rust proof, ISI marked, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, ball brass valve 20 mm high pressure with polythene float and flynut, ISI marked, screwed and suitable for iron pipe 20 mm bore complete all as specified and directed. Note:- Tank shall be white and make of tank shall be engraved on the tank.

Supply and fixing in replacement of gun metal, globe or gate valve, with iron wheel head, 15mm dia, screwed both ends for iron pipes or unions complete all as specified and directed.

Supply and fixing in replacement of gun metal, globe or gate valve, with iron wheel head, 20mm dia, screwed both ends for iron pipes or unions complete all as specified and directed.

Supply and fixing in replacement of bib taps, 15mm bore, long body, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule or union and fixed complete all as specified and as directed. Note : Weight of bib tap shall not be less than 0.575 Kg

Supply and fixing in replacement of stop valves, 15mm bore, fancy type, chromium plated, ISI marked, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. Note : Weight of stop valve shall not be less than 0.575 Kg

Supply and fixing of vitreous china squatting pan of Orissa pattern, size 580mmx440mm, white (Ist quality) with and including PVC ‘P’ or ’S’ trap, with front or back inlet and integral foot rests of any pattern including connections to existing trap, flushing pipe, anti syphonage pipe etc and provision of lime concrete bedding for fixing including taking down of old WC and removal from site, complete all as specified and directed.

Supply and fixing of vitreous china wash hand basin, white colour, flat back, of size 550x440mm, ISI marked, with 2 Nos.CI brackets embedded in cement mortar 1:4, 32 mm dia PVC waste pipe, 45cms long, fixed to walls, 32 mm dia brass chromium plated waste coupling, 15mm dia PVC connections including fixing including taking down of old WHB and removal from site, complete all as specified and directed.

Supply and fixing in replacement of pillar taps, 15mm bore, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.

Material and labour for running welding in repairs for thickness of metal to be welded not exceeding 6mm complete all as specified and as directed.

Supply and fixing of waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms/ 40mm-60 gms) suitable for 32mm bore dia discharge pipe complete all as specified and as directed.

Supply and fixing in replacement of brass chromium plated shower rose 125mm size with or without swivel joints, any size including fixing to steel pipe or union complete all as specified and as directed.

Supply and fixing of PVC connections, 450 mm long and 15mm dia with PTMT nuts of length 300mm complete all as specified and directed.

Supply and fixing of cast iron floor trap for 75mm dia of outlet, wilh grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

Supply and fixing in replacement of 10 litre capacity, virgin polypropylene cistern, ISI marked, coloured, low level, valveless syohonic action type, complete with PVC bend/flush pipe and making all connections including making good the disturbed surface to match with the existing surface complete all as specified and directed.

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.

Material and labour for 100mm thick PCC (1:4:8), type D2 using 40mm graded stone aggregate as in sub base of floor or hardstanding finished even and fair complete all as specified and directed.

Material and labour, for vibratory compacted, precast cement concrete rubber moulded, coloured (except grey colour), interlocking paver blocks in milano shape, confirming to IS-15658-2006 of 80mm thickness, M-40 grade, as in path, hard standing, etc. laid over and including 25 mm thick rammed bedding layer of sand, complete all as specified and directed

Material and labour, for precast cement concrete solid blocks masonry, blocks made of PCC (1:3:6) type C1, using 20mm graded stone aggregates, Grade C confirming to IS-2185 (Part-I), 45cm high, 10 cm thick and of suitabe including weathering, slightly rounded or chamfered angles and throating, as in kerb continuous edging and setting in cement mortar (1:4) and struck flush as the work proceeds and finishing with neat cement flush joint complete all as specified and directed

SCHEDULE A PART II (E/M WORKS) Taking down carefully any type of point wiring (light, fan, socket or power) complete with fittings such as switches, ceiling roses, pendants, regulators, sockets, tube light fittings with all accessories etc., and/or drawing out from existing conduit/batten and removal of materials from site and making good the disturbed surfaces of wall, floors, ceiling etc to match with the existing surfaces with matching OBD/White wash/Distemper complete all as specified and as directed.

Material and labour for point wiring with 1.50 Sqmm single core PVC insulated, unsheathed cable FRLSH, 1100 Volts grade with multi stranded copper conductor drawn through and including medium grade, ISI marked, PVC conduit not less than 25mm dia with accessories, concealed on wall/ ceiling and including 1.50 Sqmm single core PVC insulated, unsheathed cable FRLSH, 1100 Volts grade stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with and including mild steel sunken box or pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet metal confirming to IS-5139 (Pt-I) of 1969 and IS: 14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including new 3mm thick plastic laminated sheet top cover extended up to 25mm over sunken box all around for housing the switches, socket outlet, fan regulator etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light/ fan point controlled by one switch complete all as specified and directed. Notes :- (i) Switch, socket, lamp holder, ceiling rose and fan regulators to be measured and paid for separately. (ii) PVC Conduit shall conform to IS 9537 part I & III. (iii) All chases will be cut by chase cutter only.(iv) The concealed conduits and MS boxes shall be verified by Engineer-in-Charge before making good the surfaces by plastering and other finishes.

Description all as per Srl item No. 92.00 here in before but for one 3 pin socket outlet point 5 Amp on same board.

Description all as per Srl item No. 92.00 here in before but for one 3 pin socket outlet point 5 Amp on independant board.

Description all as per Srl item No. 92.00 here in before but for one bell point controlled by one one way bell push switch.

All as per the description of Serial Item No 92.00 above, but with 2.5 Sqmm PVC, FRLSH, unsheathed, multistranded cable, for one socket point 5 and 15 Amps (independent), 1100 volts grade, ISI marked, including 2.5 Sq mm size, green colour, PVC insulated FRLSH, continuous copper earth wire and connected to common earth dolly complete all as specified and as directed.

Supply and fixing of switch piano, 5 Amps, flush type, one way, single pole, 230 volts, AC supply, ISI marked complete all as specified and directed.

Supply and fixing of switch piano, 15 Amps, flush type, one way, single pole, 230 volts, AC supply, ISI marked complete all as specified and directed.

Supply and fixing of bell push, 5 Amps, flush type, single pole, one way, 230 Volts, 50 Hz, AC Supply, ISI marked complete all as specified and as directed.

Supply and fixing of socket outlet, 3/5 pin, 5 Amps, flush type, 230 volts, ISI marked complete all as specified and directed.

Supply and fixing of socket outlet, 3/5 pin, 15 Amps, flush type, 230 volts, ISI marked complete all as specified and directed.

Supply and fixing of door bell, electric, ding dong type, single phase, 230 volts, ISI marked complete all as specified and as directed.

Supply and fixing of ceiling rose, surface bakelite, 65x50mm, three terminals complete all as specified and as directed.

Supply and fixing of fan regulator, electronic step type (socket type), 230 volts, 50 Hz, AC supply, suitable for ceiling fan of any type/make/sweep complete all as specified and as directed.

Supply and fixing of lamp holder, PVC/Polycarbonate type, with back plate suitable for batten fittings complete all as specified and as directed.

Supply and fixing in replacement of indoor, decorative, channel housing fitting, in CRCA body, suitable for 18/20 watts, AC, 220-240 Volts, 50 Hz and connecting up with core 1.5 sq mm flexible copper conductor cable from ceiling rose to connector block of light fitting and fixing with two numbers square box complete all as specified and directed.

Supply and fixing in replacement of 18 watt LED tube rod, energy saving, recess mounted luminaire, high efficiency, PMMA diffuser, soft glare free light complete all as specified and directed.

Supply and fixing in replacement of decorative slim type LED mirror light fitting, 10 watt, with high output diffuser, 2 feet length, with and including 10 watt LED lamp/tube and connecting with 3 core copper conductor cable from terminal block to ceiling rose or connector of light and fixing with two numbers square box complete all as specified and directed.

Supplying and fixing in replacement, 10 watt LED bulk head light fitting with10 watt LED lamp and holder complying IP66 ingress protection and impact resistance of IK09 long life, 50000 burning hours connecting up with core 1.5 sq mm flexible copper conductor cable from ceiling rose to connector block of light fitting complete all as specified and directed .

Supplying and fixing in replacement, LED lamp of capacity 9W retrofit type with base B22 suitable for straight/angular holder complete all as specified and directed .

Supply and fixing in replacement of metal clad enclousure with a two pin and earth plug and socket with one 20 Amps MCB, 'C' curve complete all as specified and as directed.

Supply, insatallation, commissioning and testing of distibution board for MCBs, SPN, 8 way, double door, IP 43, as per IS 8623, 240 volts, with and including 100 amps fully insulated copper bus bar, earth bar, door earthing, reversible doors, PAN assembly for easy installation and all incoming and outgoing connections with suitable size lugs/thimbles and fixed on wall duly grouted in solid block wall including taking down of old DB with MCB, complete all as specified and directed.

Supply and fixing of sheet metal enclosures vertical distribution board VTPN, (MCCB DB) 4 ways, double door, 415 volts load line powder coated IP 43 protection with 200 Amps rated bus bar with shrouded neutral bar and insulated bus bar suitable for MCCB 4 pole as incomer and MCBs as out going for MS cabinet 2 mm thick duly grouted on the wall (flush) with opening arrangement and making all types of connections including dismantling and taking out old DB, MCBs and making good disturbed surface complete all as specified and directed. Note: MCCB and MCB shall be measured and paid separately.

Supply and fixing of MCCB 4 pole, 125Amps, 25kA with adjustable thermal and magnetic setting with extended link for fixing in sheet metal enclousers vertical distribution board 4 ways MCCB DBcomplete all as specified and directed.

Supply and fixing of MCB SPN, 40-63 Amps, 240 volt, 50 Hz, conforming to IS-13947-3 and IEC-60947-3:2001, beaking capacity 10 kA, 'C' curve complete all as specified and directed.

Supply and fixing of MCB SP, 6 to 32 Amps, 240 volt, 10 kA, 'C' curve, ISI marked, connected with suitable lugs and testing complete all as specified and directed.

Supply and fixing of MCB SP, 40-63 Amps, 240 volt, 50 Hz, conforming to IS-13947-3 and IEC-60947-3:2001, beaking capacity 10 kA, 'C' curve complete all as specified and directed.

Supply and laying of sub main wiring with two runs of 4 Sqmm single core PVC insulated but unsheathed multstranded copper conductor FRLS-H, 1100 Volts grade cable with one run of 4 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS-H, 1100 volts grade cable as earth conductor, drawn through and including PVC concealed conduit heavy duty grade ISI marked, not less than 25 mm dia (external) with wall thickness not less than 1.8 mm with conduit accessories in ceiling or wall including cutting chasing and making good surfaces as per existing, and taking down and removing from site existing old unserviceable burnt sub main wiring of any size and in any condition complete all as specified and directed. Note: (i) All runs of cable and one run of conduit shall be measured and paid as one metre length of unit. (ii) Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB.

Supply and laying of sub main wiring with two runs of 6 Sqmm single core PVC insulated but unsheathed multstranded copper conductor FRLS-H, 1100 Volts grade cable with one run of 6 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS-H, 1100 volts grade cable as earth conductor, drawn through and including PVC concealed conduit heavy duty grade ISI marked, not less than 25 mm dia (external) with wall thickness not less than 1.8 mm with conduit accessories in ceiling or wall including cutting chasing and making good surfaces as per existing, and taking down and removing from site existing old unserviceable burnt sub main wiring of any size and in any condition complete all as specified and directed. Note: (i) All runs of cable and one run of conduit shall be measured and paid as one metre length of unit. (ii) Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB.

Supply and laying of LT underground cable, XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty), 1100 volts grade, with stranded aluminium conductor of size 4 core, 25Sqmm and laying in trenches including taking down of old cable, complete all as specified and directed. Note: Excavation and earth work shall be measured and paid separately.

Disconnecting/dismantling old unserviceable earthing and material and labour for new earthing with galvanised earth plate electrode 600mm x 600mmx 6mm thick surrounded by charcoal and salt, buried directly in ground vertically in a pit of depth not less than 2.25m below ground level with top edge of the earth plate not less than 1.5m below normal ground level, connected to 4.00 mm GI wire earth lead by means of bolts, nuts, checks nut and washers made out of galvanized iron or steel, earth wire and thimbles protected by galvanized steel pipe 15mm dia (light grade) and connected to main switch or main control board all as shown in Electrical Plate No.3 of SSR Part-I & including necessary excavation and earth work in any type of strata, PCC (1:3:6) type C1 in pit, RCC cover slab 50mm thick in 1:2:4 type B-1 using 8mm dia TMT bars @10cm c/c both way with one 8mm dia bar as handle for lifting, 20mm dia GI medium grade watering pipe, funnel, wire wesh, charcoal or coke & salt in alternate layers, etc.all as indicated including testing on completion complete all as specified and directed. Note:- The new earthing shall be provided adjecent to old earthing site on the locations as directed by engineer in charge.

Supply and fixing in replacement of bracket for security light, made up of 25mm dia, 0.90 metre long GI pipe, light grade, bent to required shape, fixed on wall with two clamps made of 20 x 3mm mild steel flat iron, minimum 15cm long, 4 Noos. 8mm dia bolts with nuts complete all as specified and directed.

Supply and fixing of LED security light luminaire 30 watt, 230 volts, 50 Hz, made up of die cast aluminum housing with black epoxy powder coating with cover of heat resistant toughened glass, safety input voltage range 150 to 270 Volts, IP66 protection, sufficient light out put luminaire, with multiple LEDs of less than 2 Watt class and with optical grade polycarbonate lens for light distribution, LEDs shall be driven at minimum 480mA and making all required electrical connections using 3 core, 1.5 sqmm copper conductor cable from connector to ceiling rose including taking down of old light fitting, complete all as specified and directed.

Supply and fixing in replacement of light grade, GI tubing, of size 40mm bore, for cable protection and fixed with clamp to pole and wall with nuts and bolts complete all as specified and as directed.

Excavation in trenches not exceeding 1.50 metre wide and not exceeding 1.50 metre in depth and getting out in soft/loose soil for laying of cable and excavation in trenches for foundations complete all as specified and as directed.

Returning filling in, in soil, including spreading leveling watering and well ramming in layers not exceeding 25 cm each complete all as specified and as directed.

Removing excavated spoil/materials to a distance not exceeding 50 metre and depositing where directed at level not exceeding 1.5 above the starting point complete all as specified and as directed.

Material and labour for Sand cushioning to cable with a layer of sand 8 cm deep before laying the cable and 15 cms deep after laying the cable (punned down to 18 cms depth after laying and stretching of cable ) complete all as specified and as directed.Note:- The punned thickness 18cm shall be considered for payemnt purposes.

Supply and laying of old size sub class 'B' bricks, as in cable protection, laid in transverse direction to the cable complete all as specified and as directed.

Note:- Amount of credit of Rs. 66,161.80 for retrieved materials is mentioned in Schedule of Credit Page No. 15 & 16 of tender documents in pdf form which will be deducted offline while acceptance of tender.

PARVEEN KUMAR

Karishan Kumar goel

Gupta Enterprises

Ashwani Kumar

SM ENGINEERS