Construction of Link road from Malag to Malahu road Km 0/0 to 2/110 including 33.40 mtr span PSC box Girder Bridge over Moul Khad (HP) under NABARD RIDF-XXVII

Amount

Excavation for road way in hilly areas in all heights and depths and in all kinds of soil by manual/ mechanical means, including saturated soil comprising of ordinary soil, ordinary rock, soft rock, hard rock chiseling or wedging out rock (where blasting is prohibited) and their intermediate classification of soil complete including setting out true to the required lines grades, cutting width and trimming of side slopes, camber, super elevation and levels as shown in the drawings and as directed by the Engineer-in Charge complete according to the MORD Technical Specification Section 300 and 1600 and sorting out and stacking of useful materials with in all leads and lifts of material in acquired road width and transporting of un-useful materials for filling in road ways, camber, embankments for grade improvements and disposal of all surplus materials to the approved dumping sites through all modes of transportation including head load or animal transport or by mechanical means including leveling, fine dressing and carriage of machineries, materials, tools, equipments and safety measures and other incidentals necessary to complete the work by mechanical means and labour if required.All useful material such as stones shungle, aggregate and slates etcetra shall be sorted out and stacked in proper stack. Recovery of stones to the tune of 1153.92 cubic meter quantity at the rate of Rs. 300/- only (Rupees three hundred only) per cubic meter shall be effected from the contractor running bills on pro-rata basis as per actual quantity executed. Any loss to the public/private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be compensated by him to the extent of damage occurred in all cases.The rate including Royality, Malkana, Octroi, toll tax,GST or any other taxes imposed by the Government.

Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drains and foundation of other structures or other sources graded and compacted in 200mm (two hundred millimeter) thickness in every layers and compacted with three wheel road roller 80-100 (eighty- one hundred) KN static weight roller to meet the requirements of table 300.1 & 300.2 as per MORD technical specification section 300 and 1600 and as per the entire satisfaction and directions of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, toll tax,GST or any other taxes imposed by the Government.

Earth work in excavation for foundation of structure such as retaining walls, breast walls, culverts, drains and parapets etcetra in all type of classification of soil, comprising of ordinary soil, ordinary rock, hard rock, chiseling/wedging out rocks (where blasting is prohibited) as per drawing and MORD Technical Specification section 300 & 1600 as per the direction of Engineer-in-Charge including setting out, shoring and bracing, removal of stumps and other deleterious materials and disposal of excavated material upto any lead and lift including dressing of sides and bottom and backfilling in trenches with excavated suitable approved materials to the original surface in layers not exceeding 150mm (one hundred fifty milimeters) compacted thickness of each layers including shoring, strutting and pumping or bailing out water (surface and sub-soil water) upto any depth and any quantum of water including cleaning of slush which may arrise out during dewatering as per entire satisfaction and the direction of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals.The rate is including octrai, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete for all type of structure complete of nominal mix 1:4:8 ( One cement : four sand : eight graded crushed/ broken stone aggregate 40mm ( forty millimetre) nominal size on ground or under water including curing complete and pumping or bailing out water, dewatering, removal of slush as required at site which may arise at the time of laying concrete complete for all heights/ depths including the cost of form work complete in all respect in retaining wall, wing wall etcetra as per drawing and M.O.R.D. technical specification section 800, 900, 1200 and 1600 as per the entire satisfaction and direction of the Engineer –in-Charge including carriage of materials within all lead, lifts and other incidental . The rate is including octroi, royality, Malkana. toll tax, GST or other taxes imposed by the Government.

Back filling with granular material behind abutments, wing walls, return walls and retaining walls complete as per drawing and MORD technical specifications section 1200, 1600 and as per the entire satisfaction and direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidental. The rate is including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing 100mm dia ( One Hundred millimetre) diameter P.V.C. pipe weep holes in brick masonry/ stone masonry, plain/reinforced concrete abutment, wing wall, return wall and retaining/breast walls through the full width of the structures with slope of 1(V): 20 (H) (one vertical: twenty horizontal) towards draining face complete as per drawing and M.O.R.D. technical specifications section 700, 1200 and as per the entire satisfaction and direction of Engineer- in-Charge including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated concrete for plain cement concrete in open foundation for all type of structure complete nominal mix 1:3:6 ( One cement : three sand : six graded crushed/ broken stone aggregate 40mm ( forty millimetre) nominal size on ground or under water and curing complete including pumping or bailing out water , dewatering removal of slush as required at site which may arise at the time of laying concrete complete for all heights/ depths including the cost of form work complete as per drawings and M.O.R.D. technical specification section 800, 900 and 1200 as per the direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana. toll tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated concrete for plain cement concrete in open foundation for all type of structure complete nominal mix 1:3:6 ( One cement : three sand : six graded crushed/ broken stone aggregate 20mm (twenty millimetre) nominal size on ground or under water and curing complete including pumping or bailing out water , dewatering removal of slush as required at site which may arise at the time of laying concrete complete for all heights/ depths including the cost of form work complete as per drawings and M.O.R.D. technical specification section 800, 900 and 1200 as per the direction of the Engineer-in-Charge including carriage of material within all leads and lifts and other incidental . The rate is including octroi, royality, Malkana. toll tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated concrete for plain cement concrete in sub-structure for all type of structure complete nominal mix 1: 2 ½ :5 ( One cement : two point five sand : five graded crushed/ broken stone aggregate 40mm ( forty millimetre) nominal size) on ground or under water and curing complete including pumping or bailing out water , dewatering removal of slush as required at site which may arrise at the time of laying concrete complete for all heights/ depths in Toe wall and parapets etcetera including the cost of form work as per drawings and M.O.R.D. technical specification section 800, 900 and 1200 and as per direction of Engineer-in-Charge Including carriage of material within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated concrete for plain cement concrete in craddle bedding for all type of structure complete nominal mix 1: 2 ½ :5 ( One cement : two point five sand : five graded crushed/broken stone aggregate 40mm ( forty millimetre) nominal size on ground or under water and curing complete including pumping or bailing out water , dewatering removal of slush as required at site which may arise at the time of laying concrete complete for all heights/ depths including the cost of form work as per drawings and M.O.R.D. technical specification section 800, 900 and 1100 and as per the entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Filling in foundation, trenches as per MORD technical specification as per clause 305.3.9 earth filling as per the directions of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals and entire satisfaction of the Engineer-in-charge. The rate is including Royality, Malkana, Octroi, toll tax, GSTor any other taxes imposed by the Government.

Providing and laying (to level or slope) 900mm (Nine Hundred millimeter) diameter ISI marked reinforced cement concrete heavy duty non pressure pipes I.S class NP-3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 (one cement : two sand) but excluding the cost of excavation, protection works, back filling, concrete and masonary work in head walls and parapets etcetera as per drawing and MORD technical specification section 1100 as per the direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including Octrai, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete in open foundation Grade- M-20 (M-Twenty) design mix with graded crushed stone aggregate 40mm (forty millimeter) nominal size with cement contents not less than 330 Kg ( Three hundred thirty kilogram) per cubic metre in flooring etcetra complete as per drawings and MORD technical specification section 800, 900 and 1200, including the cost of form work and curing complete including hauling of materials with in all leads, lifts and other incidental and as per the entire satisfaction and directions of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax,GST or other taxes imposed by the Government.

Loosening of the ground up to a level of 300mm (Three hundred millimeter) below the sub-grade level, watered graded with motor grader and compacted in layers to meet the requirements of Table 300.1 and 300.2 with power road roller 8-10 (eight – ten tonne) capacity for sub-grade construction as per MORD Technical specification rural roads section 300 including of materials with in all leads, lifts and other incidentals or as per the entire satisfaction and direction of the Engineer-in-Charge. The rate is including Royality, Malkana, Octroi, toll tax,GST or any other taxes imposed by the Government.

Construction of sub grade and earthen Shoulder with approved materials obtained from borrow pits within all leads and lifts, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 as per MORD technical specification section 400 including hauling of material with in all leads, lifts and other incidentals and as per the entire satisfaction and direction of Engineer-In-Charge. The rate is including Royality, Malkana, Octroi, toll tax, GST or any other taxes imposed by the Government.

Construction of Granular sub base 175mm (one hundred seventy five millimeter) consolidated thickness by providing well graded material as per table 400.1 spreading in uniform layers with tractor grader on prepared surface, mixing by mix in place method at OMC with tractor mount appropriate rotavator attachment and compacting with three wheel 80-100 (eighty – oneHundred) kN static roller to achieve the desired density, complete as per MORD technical specification section 400 for grading-I material and as per the entire satisfaction direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidental. The rate is including Royality, Malkana, Octroi, toll tax,GST or any other taxes imposed by the Government.

Providing, laying, spreading and compacting of stone aggregate of specific sizes to water bound Macadam specification including spreading in uniform thickness hand packing, rolling with three wheel 80-100 K.N. static Road roller in stages to proper grade and camber, applying and brooming, stone, screening type-B of size 11.2mm (eleven point two millimetre) nominal size at the rate of 0.20 cum. (Zero point two zero cubic metre) per ten square metre and binding materials at the rate of 0.06 cum. (Zero point zero six cubic metre) per ten square metre to fill up the interstices of coarse aggregate, watering and compacting to the required density grading –II, 63mm to 45mm ( sixty three millimeters to forty five millimeters) size of aggregate, 75mm ( seventy five millimetre) compacted thickness as per M.O.R.D. technical specifications section 400 including hauling of material in all leads, lifts as per the entire satisfaction and direction of Engineer -in- Charge including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing, laying, spreading and compacting of stone aggregate of specific sizes to water bound Macadam specification including spreading in uniform thickness hand packing, rolling with three wheel 80-100(eighty-hundred) K.N. static Road roller in stages to proper grade and camber, applying and bromming, stone, screening Type-B of size 11.2mm (eleven point two millimetres) nominal size at the rate of 0.18 cum. (zero point one eight cubic metre) per ten square metres to fill up the interstices of coarse aggregate, watering and compacting to the required density grading –III, 53mm to 22.4mm ( Fifty three millimeters to twenty two point four millimeters) size aggregate, 75mm ( seventy five millimetre) compacted thickness as per M.O.R.D. technical specifications section 400 including hauling of material in all leads, lifts as per the entire satisfaction and direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and applying primer coat with bitumen emulsion (SS-I) on prepared surface of granular base including cleaning of road surface with hydroulic brooms and spraying primer at the rate of 0.85 kg per Sqm (zero point eight five kilogram) per square meter as per MORD Technical specification section 500 as per the entire satisfaction and direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including Royality, Malkana, Octroi, toll tax,GST or any other taxes imposed by the Government.

Providing and applying tack coat with BITUMEN emulsion (SS-1) using emulsion distributor on the prepared granular surface treated with primer and cleaned with hydraulic brooms and spraying tack coat at the rate of 0.275 kg (Zero decimal two seven five kilogram) per square metre using mechanical means as per MORD technical specifications section 500 as per the entire satisfaction and direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying 30mm (thirty milimetres) thick compacted thickness bituminous concrete with minimum 100-120 (one hundred to one hundred twenty) TPH hot mix batch type plant with electronic control grading-II using crushed aggregate 13.2 mm (thirteen decimal two millimetre) nominal size of specified grading premixed with bituminous binder VG-10 (Viscosity grade-Ten) at the rate of 5.5% (Five point five) percent of mix weight and using cement as filler with quantity not less than 2% ( two percent) by weight of total aggregate or as per design mix transported to site, laid with sensor paver finisher hydraulic with sensor control to the required grade, level and alignment, over a previsiouly prepared surface and rolling complete with smoth three wheel roller 8-10 (eight to ten) tonne capacity for initial break down rolling and vibratory roller 8-10 (eight to ten) tonne capacity or pneumatic tyre roller of 12-15 (twelve to fifteen) tonne with tyre pressure of atleast 0.56 MPa (Zero decimal five six) for intermediate rolling and finish rolling with 6-8 (six to eight) tonne smoth wheeled tandom roller to achive the desire compaction as per MoRTH technical specification section 500 complete in all respect or as directed by the Engineer-in-charge including carriage of material within all leads, lifts, and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design , over a prepared sub base, with 43 grade(Forty three grade) cement or any other type as per clause 1501 M-30, (M-Thirty) grade coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25mm, (Twenty five milimetre) mixed in a concrete mixer of not less than 0.2 cum. (Zero point two cubic metre) Capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (Steel channel) laying and fixing of 125 micron (One hundred twenty five micron)thick polythene film, wedges, steel plates including leveling the formwork as per drawing, spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, (Fourteen days) using curing compound ( where specified ) and water finishing to lines and grade as per drawing and MORD technical specification section 1500. Including carriage of material within all leads, lifts and other incidental . The rate is including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing Reinforced cement concrete mechanically mixed and vibrated M-15 grade nominal mix 1: 2 ½ : 5 ( one cement : two & half sand : five graded crushed /broken stone aggregate 40mm ( forty millimeter) nominal size, kilometre stone/ local stone of standard design as per IRC : 8 ( eight) Fixing in position including painting and printing etcetera as per drawing and M.O.R.D. technical specification rural roads section 1700 (Oridinary kilometer stone precast] including hauling of materials within all leads, lifts and other incidental or as per the entire satisfaction and directions of Engineer-in-Charge . The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing Reinforced cement concrete mechanically mixed and vibrated M-15 grade nominal mix 1: 2 ½ : 5 ( one cement : two & half sand : five graded crushed /broken stone aggregate 40mm ( forty millimetre) nominal size, kilometre stone/ local stone of standard design as per IRC : 8 ( eight) Fixing in position including painting and printing etcetera as per drawing and M.O.R.D. technical specification rural roads section 1700 (200 mtr (Two hundred meter) stone precast including hauling of materials within all leads, lifts and other incidental or as per the entire satisfaction and directions of Engineer-in-Charge . The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing of semi reflective cautionary, mandatory and informatory sign 600mm (six hundred millimeter) equilateral Triangle board as per IRC:67 made of 1.5 mm (one point five millimeter) thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm ( sixty five millimeter ) width and required letters and figures with reflective tape engineering grade as per section 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47 mm x 12 SWG ( forty seven millimeter into forty seven millimeter into twelve standard wire gauge )sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 (M- fifteen ) grade cement concrete 450x450x600 mm, (four hundred fifty into four hundred fifty into six hundred millimeter, 600 mm ( six hundred millimeters ) below ground level and as per approved drawing and MORD technical specification section-1700 including painting angle iron post with primer and two coats of epoxy paint as per specifications and entire satisfaction / directions of Engineer –in- charge including hauling of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government

Providing and fixing erecting direction and place identification semi reflective Traffic sign boards upto 0.90 sqm. (Zero point ninety square meter) as per IRC:67 made of 2mm (two millimeter )thick MS sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70mm (seventy millimeter) width and required message letters figures with reflective tape of engineering grade as per MORD specification of required shade and colour supported and welded on two Nos. 47mm x 47mm (forty seven millimeter into forty seven millimeter) of 12(twelve) SWG square tube of 3050mm (Three thousand fifty millimeter) height duly strengthened by 25mm x 5mm (twenty five millimeter into five millimeter) MS flat iron on edges on back firmly fixed to the ground by means of properly designed foundation with M-15 (M-fifteen) grade cement concrete 450mmx450mmx600 mm, ( Four hundred fifty millimeters into four hundred fifty millimeters into six hundred millimeters),600mm (six hundred millimeters ) below ground level as per approved drawing and MoRD technical specification section 1700 as per the entire satisfaction and direction of Engineer-in-charge. Including hauling of materials within all leads, lifts and other incidental. The rate is including octroi, royality, malkana,toll tax, GST or other taxes imposed by the Government.

Providing and fixing erecting direction and place identification semi reflective Traffic sign boards more than 0.90 sqm. (Zero point ninety square metre) as per IRC:67 made of 2mm (two millimetre) thick MS sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70mm (seventy millimetre) width and required message letters figures with reflective tape of engineering grade as per MORD specification of required shade and colour supported and welded on two Nos. 47mm x 47mm (forty seven millimetre into forty seven millimetre) of 12(twelve) SWG square tube of 3050mm (Three thousand fifty millimetre) height duly strengthened by 25mm x 5mm (twenty five millimetre into five millimetre) MS flat iron on edges on back firmly fixed to the ground by means of properly designed foundation with M-15 (M-fifteen) grade cement concrete 450mmx450mmx600 mm ( Four hundred fifty millimetre into four hundred fifty millimetre into six hundred millimetre),600mm (six hundred millimetre) below ground level as per approved drawing and MoRD technical specification section 1700 as per the entire satisfaction and direction of Engineer-in-charge. Including hauling of materials within all leads, lifts and other incidental. The rate is including octroi, royality, malkana,toll tax, GST or other taxes imposed by the Government.

Providing and fixing of typical NABARD informatory sign board with logo as per M.O.R.D. specification and drawing . Three MS plates of 1.6 mm ( one point six millimetre) thick top and middle plate duly welded with MS flat iron 25mmx5mm ( twenty five millimetre into five millimetre) size on back on edges. The lower plate will be welded with MS angle iron frame of 25mmx25mmx5mm (twenty five millimetre into twenty five millimetre into five millimetre). The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 Nos. ( Two Numbers) 75mmx75mm (seventy five millimetre into seventy five millimetre) of 12 SWG ( twelve standard wire gauge) sheet tubes posts duly embedded in cement concrete M-15 ( M fifteen) grade nominal mix 1:2.5:5 (One cement: two and half sand: five graded or crushed stone aggregate 40mm (Forty milimetre) grade blocks of 450mmx450mmx600mm ( four hundred fifty millimetre into four hundred fifty millimetre into six hundred millimetre), 600mm ( six hundred millimetre) below ground level. The top most diamond plate will be welded to middle plate by 47mmx47mm ( forty seven millimetre into forty seven millimetre) of 12 SWG ( twelve standard wire gauge) steel plate tube. All MS will be stove enameled on both sides. Lettering and printing, arrows, borders etcetra will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing and M.O.R.D. technical specifications section 1700 including carriage of materials to various location through all modes of transportation within all leads, lifts and other incidental and as per direction of Engineer-In-Charge. The rate is including octroi,royality,Mlakana,toll tax, GST or other taxes imposed by the government.

Earth work in excavation for all type of bridge structure in all type of classification of soil, comprising of ordinary soil, ordinary rock, hard rock chiseling / wedging out rocks (where blasting is prohibited) as per drawing and MORT&H technical specification section 300 including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal of materials upto all leads and lifts including dressing of sides and bottom and back filling in trenches with excavated suitable / approved materials to the original surface in layers not exceeding 150 mm (one hundred fifty millimetres) compacted thickness including shoring and strutting, pumping and bailing out water (surface and sub soil water) upto any depth and any quantum of water including cleaning of slush which may arise out during dewatering as per directions of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, malkana,toll tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated concrete for plain cement concrete for all type of structure complete in grade M-10 (M-Ten) with crushed stone aggregate 40mm (forty millimeters) nominal size with cement content not less then 230 kg (Two hundred thirty Kilogram) per cubic meter and curing complete for 14 (fourteen) days including cost of form work in open foundation including pumping or bailing out water/dewatering, removal of slush which may arise at the time of laying concrete in all heights/depths complete as per drawing and MORTH technical specification section 1500,1700 and 2100 and as per the directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkana, Octroi, toll tax,GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and viberated plain cement concrete in sub-structure grade M-20 (M-Twenty) design mix with cement contents not less than 344 Kg (Three hundred forty four kilogram) per cubic metre with graded crushed stone aggregate 40mm (Forty millimetre) nominal size in abutments etcetra as per drawings and MORTH technical specification section 1500, 1700 and 2200 including the cost of form work and curing complete including hauling of materials in all kinds of leads, lifts and other incidental and as per the entire satisfaction and directions of Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete in sub-structure design mix to obtain minimum compressive strength of grade M-30 (M- thirty) using cement contents not less than 407 Kg (Four hundred seven Kilogram) per cubic metre with 20mm (twenty millimetre) nominal size crushed stone aggregate including the cost of form work and curing complete as per drawing and MORT&H technical specifications section 1500, 1700, 2100 and as per the directions of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Supplying fitting and placing HYSD bar reinforcement in sub-structure complete with straightening, bending, binding of bars including cost of binding wire in all heights/ depths as per drawing and MORTH technical specifications section 1600 and 2200 and as per direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and laying filter media with granular crushed aggregates as per specification to a thickness of not less than 600 mm (Six hundred millimetre) with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to a firm condition complete as per drawing and MORT&H technical specification clause 710.1.4.of IRC:78 and section 2200 as per the entire satisfaction and direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Supplying, fitting and fixing in position true to line and level POT-PTFE bearing consisting of a metal piston supported by a disc or unreinforced elastomer confined within a metal cylinder, sealing rings, dust seals, PTFE surface sliding against stainless steel mating surface complete assembly to be of cast steel/ fabricated structural steel, metal and elastomer elements to be as per IRC:83 Part I & II respectively and other parts conforming to BS:5400 section 9.1 & 9.2 and section 2000 of MoRTH specifications complete with all accessories or as directed by the Engineer-in-Charge including carriage of material with in all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Furnishing and placing reinforced/ prestressed mechanically mixed and vibrated cement concrete in super structure as per drawing and MORT&H. technical specification section 1500, 1700 and 2300 Grade M-35 (M- thirty five) design mix with cement contents not less than 422 kg (Four hundred twenty two Kilogram) per cubic metre with 20mm (Twenty millimetre) nominal size grade crushed stone aggregate and curing complete including cost of form work but excluding the cost of reinforcement concrete work in deck slab and wheel guard etcetra upto all heights complete as per the direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete grade design mix to obtain minimum compressive strength of grade M-30 (M-thirty) using cement contents not less than 407 Kg (Four hundred seven kilograms) per cubic metre with 20mm (Twenty millimeters) nominal size graded crushed stone aggregate in approach slab including cost of form work and reinforcement and curing complete as per drawing and MORTH technical specification section 1500, 1600, 1700, 2700 and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and laying 50mm (Fifty milimetres) thick Mastic asphalt wearing course on top of slab using paving grade bitumen VG-30 (VG-thirty) meeting the requirments given in table 500-29, including roughening of surface with wire brush, cleaning the surface, applying a thin bitumenios tack coat of VG-30 (VG-Thirty) grade bitumen at the rate of 0.325 kg ( zero decimal three two five kilogram) per square metre. After applying tack coat fixing chicken mesh reinforcement of 1.50 mm (one decimal five zero millimetre) dia steel wire with hexagonal or rectangular opening of 20-25 mm (twenty to twenty five millimetre) before pouring mastic asphalt prepared using mastic cooker for heating coarse aggregate, filler and bitumen as per section 500 of MoRTH specification laid to required level and slope including providing antiskid surface with a layer of hard stone aggregate 13.2 mm (Thirteen decimal two millimetre) of 9.50 mm (nine decimal five zero millimetre) nominal size as per direction of Enginner-in-charge precoated with VG-30(VG-thirty) grade bitumen applied at the rate of 0.005 cum (Zero decimal zero zero five cubic meter) per 10 sqm (ten square metre) and rolled or pressed in to surface at approximate spacing of 10 cm (ten centimetre) center to center in both directions, when the temperature of surfaces not less than 100 deg. C (one hundred degree celcius) protruding 1 mm (one millimetre) to 4 mm (four millimetre) over mastic surface all complete as per section 500 including carriage of material with in all laeds, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Supplying fitting and placing HYSD bar reinforcement in super structure complete with straightening, bending, binding of bars including cost of binding wire as per drawing and MORTH technical specifications section 1600 and 2300 and as per direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Construction of Precast reinforced cement concrete railing with mechanically mixed and vibrated M-30 (M-Thirty grade design mix cement contents not less than 407 kg (four hundred seven killogram) per cubic metre with aggregate not exceeding12 mm (twelve millimetre) true to line and grade, tolerance of vertical RCC railing post not to exceed 1 in 500 (one in five hundred), centre to centre spacing between vertical post not to exceed 2000 mm (two thousand millimetre) leaving adequate space between vertical post for expansion including the cost of reinforcement and form work complete as per drawing and MORTH technical specifications section 1500, 1600, 1700, 2700 including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the government.

Providing and fixing MS drainage spouts complete with 100mm (One hundred millimetre) dia galvanized mild steel down pipe corrossion resistant structural steel grating complete as per Drawing and MORTH Technical Specifications section 2700 and as per the direction of Engineer-in-Charge including carriage of material with in all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and laying strip seal expansion joint catering to maximum horizontal movement upto 70 mm (seventy millimetre) complete as per approved drawings and standard specification to be install by the manufacturer/ supplier compliance to the manufacturer's instructions for installation complete as per drawing and MORTH technical specification 2600 and as per direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the government.

Providing and fixing in position 20 mm (twenty millimetre) thick premoulded joint filler in expansion joint for fixed ends of simply supported spans not exceeding 10 m (ten metre) to cater for a horizontal movement upto 20 mm, covered with sealant complete as per drawings and MORT&H technical specification as per direction of Engineer-in-Charge including carriage of materials within all leads and lifts and other incidentals. The rate is including of octroi, royality, Malkana,tolltax Sale Tax, GST or other taxes imposed by the government.

Providing and filling joint sealing compound as per drawings and technical specifications with coarse sand and 6 (six) per cent bitumen by weight complete as per drawings and MORT&H technical specification as per direction of Engineer-in-Charge including carriage of materials within all leads and lifts and other incidentals. The rate is including octroi, royality, Malkana, tolltax, GST or other taxes imposed by the government.

Providing and laying mechanically mixed and vibrated plain cement concrete design mix to obtain the minimum compressive strength of grade M-15 (M-fifteen) with minimum cement content not less than 275 kg ( two hundred seventy five) kilogram per cubic metre in levelling course below approach slab and curing complete as per drawing and MoRTH technical specification section 1700 and 2700 including the cost of form work complete including carriage of material with in all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying High tensile steel wires/ strands USHA MARTIN make including all accessories for stressing, stressing operations and grouting complete as per drawing and MORTH technical Specifications sectin 1800 and as per direction of Engineer in Charge including carriage of materials with in all leads, lifts and other incidental . The rate is including of octroi, royality, Malkana,tolltax, GST or other taxes imposed by the government.

Routine maintenance after completion of construction work as per term and conditions of bid document and technical specifications of MoRD including hauling/ carriage of labour, equipment and materials to various locations through all moods of transportations including all leads and lifts to the entire satisfaction of Engineer-in-Charge.

1. For First year

2. For second year

3. For third year.

4. For fourth year.

5. For fifth year

V.B Const Co.

Chamunda Construction Works