REPAIR TO LIGHTENING CONDUCTOR AT 217 TRANSIT CAMP PALCHAN

Amount

Supply & fix single pointed air termination Aluminium rod, 12 mm dia, 300 mm long complete all as specefied and as directed by Engineer-in-Charge.

Supply & fix Aluminium strip 25 x 3.15mm with saddles and fixing screws etc complete all as specefied and as directed by Engineer-in-Charge.

Supply & install GI strip 32 mm x 6 mm buried In ground complete all as specefied and as directed by Engineer-in-Charge.

Test point terminal block for lightening conductors made out of gun metal or phosphorus bronze size of 75 x 75 x 25 mm drilled and screwed incl 3 Nos 6mm dia 25 mm long hexa head screws including connected with earthing and GI / Aluminium strips complete all as specefied and as directed by Engineer-in-Charge.

Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised iron strip 32×6mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc 10 sq m on plan and n exc 1.5 m in depth and getting out hard/dense soil complete all as specefied and as directed by Engineer-in-Charge.

Returning, fillling in trenches,spreading ,levelling,watering and well ramming in layers not exceeding 25cm thick complete all as specefied and as directed by Engineer-in-Charge.

Removing excavated material/ surplus soil and depositing where directed at a distence not exceeding 50mtr.at a level not exceeding 1.5 mtr from strting point complete all as specefied and as directed by Engineer-in-Charge.

Supply lay/spread in trenches, river sand, clean, including spreading, levelling, punning for laying /cushioning of cables complete all as specefied and as directed by Engineer-in-Charge.

Supply lay in trenches fly ash bricks, old size sub class “B” for cable protection complete all as specefied and as directed by Engineer-in-Charge.

Supply, lay in trenches, floors ,fix on wall/pole, passing through pipes etc., LT UG cable, 1100 volts grade, PVC/ XLPE insulated, with multistranded aluminium conductors, armoured with galvanised steel wire or tape, of following nominal cross sections, confirming to IS specifications :- 2.0 core 16 sq mm complete all as specefied and as directed by Engineer-in-Charge.

M/S SUKHMANI ENGINEERS

JANDIAL ENTERPRISES

M/S PARMOD KUMAR

kamal electric works

NATHU RAM AND SONS