PROVN OF ALUMINUM SWING DOOR IN EMERGENCY ROOM AND MISC WORK SERVICES IN SMC, PROVN OF FLOOR TILES IN CORRIDORS AND CERTAIN ROOMS OF 19 AFDC AND ADDN / ALTN OF WIRING AT AIRMEN MESS NO.1 AT AF STN JODHPUR, UNDE GE (AF) NO.2 JODHPUR

Amount

Demolition of pcc block or stone boulder masonary built in cement mortar incl all quoins, arches, pillars etc omplete all as specified and as directed.

Taking down Chowkats or frames exc 1.5 sq. m but n exc 4 sq. m each with shutters (without taking off shutters from the frame)

M&L for squared rubble walling, Jodhpur type, brought up to courses, well bonded, bedded and solidly hearted, built in CM 1:4

Extra over stone walling for hammer dressing to face stones with maximum depression on face from a straight edge n.exc 20mm and dressing face beds and joints as specified to squared rubble walling Jodhpur type, brought upto courses.

M&L for rendering 15mmthick in CM 1:6 on stone masonry surfaces finished even and smooth without using extra cement complete all as specified.

S&F powder coating Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F Anodised aluminium door shutters, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges,anodised alumnium snap beading, screws etc. complete all as specified

S&F 8mm thick Sheet glass, ordinary quality and fixing with glazing clips in aluminium doors exc 0.5 sq. m in each pane complete all as per Engr-in-charge

M&L Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed

M&L for Jodhpur stones in lintel and beams roughly squared stone lintels hammer dressed on face and soffits, hoisted, set and pointed in lime mortar 1:3 or cement mortar 1:6 complete, n exc 3m in length

M&L for precast cement concrete type C1 1:3:6 (20mm graded aggagate ) as solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) setting in cement mortar, 1:4 complete, in walls

M&L for pre-cast cement concrete 1:3:6 type C1 (using 20mm graded stone aggragate) in block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar, 1:6 complete

Taking down cement plaster in brick walls, including raking out joints, hacking for key, scrubbing down with water etc complete all as specified.

M&L for renderning 15 mm thick in CM 1:6 on any faces of brick/concrete surfaces finished even and smooth with out using extra cement complete all as specified..

M&L for coloured glazed ceramic tiles in vertical surface 350x 250 x 7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in colour cement to match the surface over and including 10 mm thick plaster in Cm 1:4 complete all as specified and as directed .Make: Kajariya / Somani/ Orient.

Material and labour for PCC (1:4:8) type D2, 100mm thick using 40mm graded stone aggregates as in sub base, finishing the top surface of concrete even and rough to receive topping layer complete all as specified and directed.

M&L for 25 mm thick cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub floors finished rough complete all as specified.

M&L coloured Non Skid ceramic tiles 7 to 8 mm thick(square/ rectagular) area of each tile exceeding 0.06 sq m but not exceeding 0.11 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match (Make: Kajariya / Somani/ Orient.)

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

S&F Factory Made with particle board core Solid PVC Moulded Door Shutter, 28 to 30 mm thick (stiles),with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm Plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing

S&F pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed

M&L for cement concrete Type B0 1:2:4 (12.5mm graded graded graded aggregate) for filling the chowkat etc complete all as specified and directed.

M & L for mild steel work in bands, straps, holdfast, hook and pintle hinges confirming to Fe-290 grade E-165 complete all as specified.

M & L for 35mm thick of 2nd class hard wood plain framed factory made panelled shutters (any number of pannel) with panel of timber flat on both side (feathered edged) or of 12mm thick veneered particle boards with commercial faces vineers. Complete incl fixed to chowkhat the size of rails and styles as per IS 1003 or as described in SSR Part-I kiln seasoned and chemically preassure treated complete all as specified and directed.

S&F 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21

S & F 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified. Make: Ashish

S & F extruded aluminum alloy handles fabricated type and anodised of size 150mm complete all as specified.Make: Ashish

M&L for preparation of new wooden surfaces, applying two coats of synthetic enamel paint over a coat of pink primer of any description and girth complete all as specified.

S&F vitreous china wash down water closet pan (pedestal pattern), white, with flush pipe and pvc connection of 450mm long fixed complete all as specified. Make Cera,Parryware or equivalent

S&F in repair vitreous China squatting pan, `Orissa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including P trap with PVC connection 15 mm 450mm long complete all as specified. Make Cera,Parryware or equivalent

S&F in repairs PVC valveless, syphonic action type, low level flushing cistern dual type (3/6 Ltr) capacity white, with inlet, ball valve, float including brackets and connections to pies an fixing complete all as specified and directed. Make Cera,Parryware or equivalent

S&F in repairs vitreous china wash basin, white, flat back, size 450x350mm including brackets, cutting for and pinning in ends of brackets or erecting stand, brass chromium plated perforated waste coupling/ fittings 32 mm dia with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed and PVC waste pipe of 32mm bore and of suitable length, complete all as specified. Make Cera,Parryware or equivalent.

S&F in repairs, 15 mm bore stop cock/angle cock , fancy type, chromium plated half turn complete all as specified and directed by Engr-in icharge Make Johnson, Marc or equivalent

S&F in repairs 15 mm bore bib cock long body fency type with crutch or butterfly handle, cast copper alloy, chromium plated, screwed down, screwed for iron pipe or for brass ferrule. Make Johnson, Marc or equivalent

S&F in repair health faucet with 1 Mtr. Tube & Hooks (Braded tube) complete all as specified and directed. Make Approved by Engr-in-charge.

S&F in repair fancy type CP Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed of 15mm bore. Make Cera,Parryware or equivalent

M&L 15mm bore galvanised steel water tubing medium grade (ISI Marked) with all fittings and fixed complete to walls and or laid under floors etc complete all as specified. (Make : Jindal (Hassar)/ Tata/ Prakash)

All as per item No 38 here-in-before but 20mm bore pipe.

S&F for 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed

S & F in repairs rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position with fittings all as specified in SSR Part-I, 500 ltrs capacity complete all as specified. (Make: Sintex/Rotex/ Polywell)

S&F Ball valve high pressure of PTMT with epoxy coated Aluminium rod & high denisty plastic ball screwed for iron pipe and fixed of 20 mm bore pipes complete all as specified. (Minimum weight 210 gm/each.)

S&F in repairs sheet glass shelf 60cm (with brass brackets) consisting of 5.5 mm thick sheet glass with chromium plated bracket guard and railing.

S&F in repairs ss grating with or without waste hole make approved by Engr-in-charge.

S&F in repairs stainless steel soap dish made of stainless steel 1.00mm thick, approximate 150x150 mm fixed to plugs with chromium plated brass screws. Approved by Engr-in-charge.

S&F Towel Rail 600mm long of SS fixed with and including Chromium plated brass screws and wooden/plastic cleats approved by Engr-in-charge.

M&L for preparation of new plaster surfaces of wall, applying two coat of oil bond distemper over a coat of primer with alkali resistant priming paint with one coat of wall care putty complete all as specified.

S&F cast iron floor trap with grating including jointing to waste pipe with solvent cement fixed in cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate for 75 mm out let including taking out old floor trap complete all as specified.

S&F cast iron T diminishing pieces or tapers(larger bore is to be measured) with oval access door for 100 mm bore pipes complete all as specified.

S&F cast iron bend of any radius diminishing pieces or tapers(larger bore is to be measured) with oval access door for 75 mm bore pipes complete all as specified.

S&F salt glazed stoneware gully traps of size 150 x 150 mm, square or rounded mouthed, type `P' fixed in CM 1:6 and cover with RCC cover slab of size 200 X 200 X 50mm incl necessary exc, pcc etc.

S&F 100mm bore cast iron soil waste and vent spun pipes in any length with or without ears with cement joint laid in trenches or in floors complete all as specified.

All as per above ITEM NO. 53 but 75 mm bore.

S&F 100mm bore cast iron soil waste and vent spun pipes in any length with or without ears with cement joint fixed to walls all including necessary clamps made out of 25 x 4 mm flat iron with 12 mm dia stay complete all as specified.

M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregates as in foundation of manholes omplete all as specified and as directed.

M&L for cement concrete 1:2:4 type B-0, using 12.5mm graded stone aggregate as in coping and similar work incl necessary form work to obtain a smooth finishes omplete all as specified and as directed.

M&L for PCC 1:2:4 type B1 using 20mm graded aggregates as in surfaces channels and drains complete all as specified.

Supply and laying, jointing 150mm internal dia of salt glazed stoneware pipes grade 'A' incl testing and laid in trenches to a level on concrete bed complete all as specified.

M&L for cement concrete 1:3:6 type C-2 using 40mm graded stone aggregates incl packing under and haunching against the sides for 150mm internal dia SGSW pipes after they are laid and tested including demolition of old bed and pipes omplete all as specified and as directed. (thickness of concrete bed 100mm).

Cutting into existing manholes for connecting new drains making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 or 3/4 section ) in cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate finished smooth and reforming benching as required for 150mm dia pipes omplete all as specified and as directed.

Excavation in trenches n exc 1.5m wide and n exc 1.50m in depth for foundation etc and getting out in in any type of soil omplete all as specified and as directed.

Returning filling in, incl spreading levelling watering and well ramming in layers n exc 25cm (after the pipes have been laid and tested) in soft/loose soil omplete all as specified and as directed.

Removing excavated material not exceeding 50M and depositing where directed at a lavel not exceeding 1.5m above the starting point, soil omplete all as specified and as directed.

M&L for RCC type B1 1:2:4 (20mm graded aggragate )as slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like in lintel beam

M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.rough finished surfaces of concrete

M&L for precast reinforced cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, shelves and similar articles with plain faces, set in CM 1:4, including necessary form work moulds etc all as specified. (Reinforcement shall be measured and paid for separately).

M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia.

Ditto AS ABOVE item no. 68, but 5mm dia and over upto and including 10mm dia in stirrups, spacersand binders

Demolition of cement concrete in ground floor and pavings nexc 15 cm thickness (below or above ground level ) complete all as specified.

Dismantling floor hearth or wall tiling including cement mortar or bedding (but not backing ) removiing serviceable tiles to store and rubbish of the premises

M&L for 25 mm thick cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub floors finished rough complete all as specified.

M&L for coloured Vitrified Ceramic tiles double charged 10 mm thick (square/ rectagular) polished,area of each tiles not exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor over and including 15mm thich cement screed bed or bedding in CM 1:6.

All as per item No 73 above but as in skirting over 10mm thick backing coat of CM 1:4

Material and labour for point wiring with two runs of stranded copper conductor PVC insulated unsheathed 1.5 Sqmm FRLS cable in and including PVC conduit / casing caping of suitable size with PVC boards of appropriate sizes and all requisite accessories complete with PVC terminals box for mounting switches, sockets, fan regulators etc with one single core continuous 1.5 Sqmm,FRLS copper cable for earth wire complete all as specified and as directed for One Fan Point controlled by one switch.

M&L in repair for ceiling rose surfaces bakelite 65 x 50mm white coloured 2 to 3 terminals

M & L for switch socket combination 2 in 1 3 pin 5 Amps flush type (multi purpose ) complete all as specified and as directed.

Supply and fix Exhaust fan 450 mm sweep , 900 RPM , Heavy Duty Metal Body with all accessories including fixing and connecting up complete fixed in repairs all as directed.

Supply and fix Wall fan 18" , 900 RPM ,Model Hi flo wall with all accessories including fixing and connecting up complete fixed in repairs all as directed.

M&L for making hole for fixing exhaust fan and good making plaster surface of hole complete as specified and as directed.

Supply and fix air cooled split unit air conditioner electric driven , single phase of capacity 1.5 TR, BEE 5 star rating split type ACs complete all as specified

Supply and fix voltage stablizer for automatic opetation, single phase naturally cooled indoor type and designed for input variation between 170 V to 250 V with out put voltage stablized at 230 V with accuracy of + (-) 2.5% and of capacity 3 KVA .

Material and labour for point wiring with two runs of stranded copper conductor PVC insulated unsheathed 2.5 Sqmm FRLS cable in and including PVC conduit /casing caping of suitable size with PVC boards of appropriate sizes and all requisite accessories complete with PVC terminals box for mounting switches, sockets, fan regulators etc with one single core continuous 2.5 Sqmm,FRLS copper cable for earth wire complete all as specified and as directed for One 15 A socket outlet independent .

S & F Single pole and neutral enclosure with a two pin socket complete with one single pole MCB 20 Amp complete all as specified and directed.

Demolition of cement concrete in ground floor and pavings nexc 15 cm thickness (below or above ground level ) complete all as specified.

Dismantling floor hearth or wall tiling including cement mortar or bedding (but not backing ) removiing serviceable tiles to store and rubbish of the premises

M&L for 25 mm thick cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub floors finished rough complete all as specified.

M&L for coloured Vitrified Ceramic tiles double charged 10 mm thick (square/ rectagular) polished,area of each tiles not exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor over and including 15mm thich cement screed bed or bedding in CM 1:6.

All as per item No 89 above but as in skirting over 10mm thick backing coat of CM 1:4

M&L for coloured Glazed ceramic tiles in vertical surface 350 x250x 7 mm/ 450x 350x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match on rendering 10mm thick fair faces of brick work or concrete surfaces in CM 1:4.

M&L for complete removal of existing treatment of wall surfaces by scrubbing with wire brush hard brush, washing down with water, applying two coat of oil bond distemper over a coat of alkali resistant primer over one coat of wall care putty, complete all as specified.

M&L for preparation of old wooden/steel surfaces and applying one coat of synthetic enamel paint matching with existing old surfaces after repair of any description over 10 cm width or girth complete all as specified and directed by Engr-in-charge

S&F MCB distribution board, powder coated, CRCA steel sheet, degree of protection IP 43 - IK 09 with reversible double door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required with TPN, 415 volts,12 ways.

Supply and fix in repair MCCB four pole 415 V 125 Amps "C' Curve 16KA complete all as specified and directed.

Supply and fix in repair MCB SPN 20 to 40 Amps, 240 volts complete all as specified and directed.

M & L in repair sub main wiring with 2 single core, 4 Sq. mm, PVC insulated unsheathed,multi stranded copper conductor FR cable 1100 Volts grade including 4 Sqmm PVC insulated unsheathed multi stranded copper conductor FR as continuous earth wire drawn through Casing caping and connecting to common earth terminals complete all as specified and directed. Note :- (i) Two runs of copper cable and one run of earth wire including conduit /PVC casing/caping shall be measured as one length.

Supply, Laying , jointing and testing LT underground cable of 70 Sqmm 3.5 Core, heavy duty, 1100 Volts, XLPE insulated and sheathed, armoured with multi-stranded aluminium conductor cable , laid in trenches/ducts or fixed to poles/walls or laid under roads/paths/drains/culve (Note: Excavation and GI Tubing earthwork shall be measured in this Job itself.)

Supply,installation, testing and commissioning new LT feeder piller box " CPRI Approved" cubicle type,with angle & frame, free standing, floor mounted, outdoor, weather proof type, pedstal mounted feeder Pillar working on 440V 3-phase, 50 Hz, AC supply with and 4 Nos stepped aluminum bus bars for looping & branch connection system , weather proof, dust-proof and vermin proof with canopy on top, 3mm thick CRCA sheet steel enclosure, painted as per the 7-tank process and painted for outdoor, weather proof IP-55 protection installation, the bus bar chamber shall be provided with suitable Neoprene rubber gasket to make it completely dust proof .bus bar chamber shall be provided with better ventilation facility in the form of louvers for better heat dissipation as per specification with and including the following components complete all as specified and as directed:- (a) Aluminium Bas Bar capacity 300 Amps for R-Y-B 3 Nos & 150 Amps for neutral -1 No (b) MCCB 4 Pole 200 Amp , 415V 36 KA -01 Nos (Incomer) (b) MCCB 4 Pole 160Amps , 415V 36 KA -02 Nos (c) MCCB 4 Pole 63 Amps 25KA -02 Nos

DEV INDUSTRIES

Lalit Enterprises