REPAIR/MAINT TO FLOORING, PAINTING, ROOFING, PLUMBING/SANITARY FITTINGS AND OTHER B/R WORKS AT KARGIL WAR MEMORIAL AND CERTAIN PLACES AT DRASS UNDER GE KARGIL

Amount

Taking down cement plaster on brick or stone walls, etc. including raking outjoints, hacking for key, scrubbing down with water, etc complete all as specified and directed by Engr-in-Charge.

Demolition of precast concrete articles and precast concrete block walling including all quoins, arches, pillars, etc built in cement mortar of any description not other specifically provided for etc complete all as specified and directed by Engr-in-Charge.

M&L for Precast cement concrete type-C-1 block masonary with solid blocks 1:3:6 (using 20mm graded crushed stone aggregate) exc. 10cm in width and setting in cement mortar (1:6)complete all as specified and directed by Engr-in-Charge.

M&L for rendering 15mm thick cement plaster in cement mortor (1:4) finished even & fair without using extra cement on brick/concrete surfaces complete all as specified and directed by Engr-in-Charge.

M&L for preparation of newly plastered surface and applying two coat of cement base paint on walls over coat of chalk whitening complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of newly wall surface and applying two coat of premium acrylic exterior emulsion paint on walls over coat of wall care putty complete all as specified and as directed by Engr-in-Charge.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings etc complete all as specified and directed by Engr-in-Charge.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of specified colour having tensile strength of 550 Mpa as in roof overing/ cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

S&F 0.63mm thick, galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with self tapping screw or L-type or J-type or crancked hook bolts and washers as in roofs, walls etc, with grade of zinc coating 275, complete all as specified and directed by Engr-in-Charge.

S&F 0.63mm thick, galvanised, plain mild steel sheeting with two corrugations side lap, fixed with self tapping screw or L-type or J-type or crancked hook bolts and washers as in roofs, walls etc, with grade of zinc coating 275, complete all as specified and directed by Engr-in-Charge.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed by Engr-in-Charge.

S&F False ceiling using anodised aluminium snap grid frame work for 4mm thick non asbestos fibre cement building boards 600mm x 600mm using hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of appropriate GI assembly if reqd complete all as specified and directd by Engr-in-Charge.

All as per Srl item 13.00 here-in-before fixing only except material complete all as specified and directed by Engr-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge.

S&F glazed coloured ceramic tiles 350X250X7mm/ 450X350X7mm thick as in vertical surface such as skirting, dado, etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles incl 10mm thick plastering in CM 1:4 complete all as specified and directed by Engr-in-charge.

M&L for Non Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exc 0.06 and n.exc 0.11 Sqm in floors etc over 15mm screed bed in cement mortar (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr-in-Charge.

M & L for coloured chequered cement concrete tiles 300x300x25mm thick, with grey cement pigments, set, jointed and pointed in neat cement slurry in floors including 15 thick screed bed in cement mortar ( 1:6) complete all as specified and as directed by Engr-in-Charge.

M&L for endura tiles, heavy duty, for high traffic 300x300mm, 10mm thick, non skid, acid and scratch resistance over 15mm thick screed bed in CM 1:4 as in floor, set, jointed in neat cement slury complete all as specified and as directed by Engr-in-Charge.

Demolition of Cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engr-in-Charge.

M&L for 75 mm thick PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregate as in flooring, PCC path, sub base and surface finished even and fair with out using extra cement all as specified and as directed.

Dismantling of Stone sett paving of any description or thickness complete all as specified and directed by Engr-in-Charge.

M&L for Machine pressed precast conctete interlocking paver block 60mm thick any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement and pigment including laid over 40mm thick sand cushion complete all as specified and directed by Engr-n-Charge.

M&L for 25 mm thick PCC 1:2:4 type B-0 using 12.50 mm graded crushed stone aggregate as in flooring even and smooth without using extra cement all as specified and as directed.

Demolition of cement concrete (reinforced) of any description and in any position complete all as specified and directed by Engr-in-Charge.

M&L for precast cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregates ) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar (1:4) complete all as specified and directed by Engr-in-Charge.

S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engr-in-Charge.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and directed by Engr-in-Charge.

M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:3) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 20mm thick screed bed in cement mortar (1:4) complete all as specified and as directed by Engr-in-Charge.

M&L for makrana white marble slab work 18-20mm thick table rubbed and polished in steps, jambs, pillars, window- cills, cooking platforms including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble over and including 20mm thick screed bed in cement mortar (1:4) complete all as specified and as directed by Engr-in-Charge.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 20 mm thick screed bed in cement mortar ( 1:4) complete all as specified and directed by Engr-in-Charge.

M&L for rubbing and treating kota stone/marble slab surfaces with beeswax polishing including cleaning etc complete all as specified and directed by Engr-in-Charge.

Fixing only dholpur stone slab including cutting/grinding, with cement slurry and laid over 20mm thick screed bed or bedding layer in CM 1:4 and jointed and pointed with colour cemnt and pigment including demolition of existing stone complete all as specified and directed by Engr-in-Charge. Note:-Dholpur stone slab will be issued under Sch 'B' free for fixing.

Fixing only dholpur jali/jaffri, with cement mortar 1:3 and jointed and pointed with colour cemnt and pigment including dismantling of existing jali/jaffri complete all as specified and directed by Engr-in-Charge. Note:-Dholpur jali/jaffri will be issued under Sch 'B' free for fixing.

M&L for prepration of old treated wood based surfaces by sizing and applying wood filler, staining with oil/sprit including under coating and two finishing coat with synthetic varnish complete all as specified and directed by Engr-in-Charge.

M&L for prepration of old surfaces of steel and applying two coat of synthetic enamel paint , not otherwise described over 10cm width or girth complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old painted plastered or concrete surfaces of any discription and applying two coats of synthetic enamel paint complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of old plastered or unplastered sufaces of wall of any discription and applying two coats of cement base paint paint complete all as specified and as directed by Engr-in-Charge.

M&L for complete removal of existing treatment from wall surface and applying two coat of premium acrylic exterior emulsion paint on walls over coat of wall care putty complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of old wall surface and applying two coat of premium acrylic exterior emulsion paint on walls complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of existing treated old surfaces of chequred tile, interlocking tile or stone floor etc and applying two coats of floor paint of approved tint complete all as specified and as directed by Engr-in-Charge.

S&F in repair PVC flushing cistern valveless syphonic action type flushing cistern low level 10 Ltrs white with inlet ball valve float and handle incl bracket, and connections to pipes and fixing of chain and pull, or lever, if anycomplete all as specified and directed by Engr-in-Charge.

S&F in repair 15mm bore Stop valves fancy type, chromium plated with long shank and cup (concealed type) complete all as specified and directed by Engr-in-Charge.

S&F in repairs 15 mm dia Bib taps fancy type, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed by Engr-in-Charge.

S&F in repair 15mm bore PVC connection 450mm long both ends screwed with brass cap complete all as specified and directed by Engr-in-Charge.

S&f in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed by Engr-in-Charge.

S&F in repair for Vitreous China Urinal, full stall type size 430x370x340mm, including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; flush pipe, grating and Union for discharge pipewhite complete all as specified and directed by Engr-in-charge.

S&F in repair vitreous China urinal partition white of Size 310 x 700 mm incl finishing the joints with white cement & fixed complete all as specified and directed by Engr-in-Charge.

S&F in repairs vitreous china white Counter Basin With Fixing Accessories, Size:570x450 mm, of oval shape fixing complete with accessories such as CP waste coupling, waste pipe and fixed on granite slab complete all as specified and directed by Engr-in-Charge.

S& F in repair one piece EWC with soft closing seat cover and fittings complete, 710 x 370 x 745 mm, modern curvy design with flushing efficiency 3.90/2.10 LPF complete, the shade of EWC to be approved by Engr in Charge, complete all as specified and directed.

S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed by Engr-in-Charge.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed by Engr-in-Charge.

S&F in repairs 15mm bore Pillar taps fancy type, chromiun plated cast copper alloy, screwed down, high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed by Engr-in-Charge.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for re fixing or removal to stores complete all as specified and directed by Engr-in-Charge.

All as per Srl item no. 54.00 here-in-before but 20 mm bore complete all as specified and directed by Engr-in-Charge.

S&F 15mm dia bore GI tubes medium grade with all fitting and fixed complete to walls and ceiling or laid in floor complete all as specified and directed by Engr-in-Charge.

All as per Srl item no. 56.00 here-in-before but 20 mm bore complete all as specified and directed by Engr-in-Charge.

Note:-The accepted amount will be arrived after deducting the Sch of credit i.e. Rs 28,900.00 and any other reduction if any from quoted amount.

M/S TRADE LINK