REPAIR AND MAINT OF CERTAIN WOODEN AND OTHER FURNITURE AT GE IMA DEHRADUN

Amount

Repair/Relacement of following U/S parts of "Peg Table" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg No. FD-277 and directed by Engr-In-Charge:-

S&F new top of 18/19mm prelaminated MDF board of exterior grade size 450x300mm with 4mm thick half round beading all round of table top as directed.

Long rails

Short rails

stiffeners

Rubber shoes

Tightening of complete table by suitable size nails & wood corner as directed by Engr-in-Charge at site.

M&L for two or more coat french polish with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

Repair/Relacement of following U/S parts of "Teapoy Wooden" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg No. FD-232 /278/382 and directed by Engr-In-Charge:-

S&F new top of 18mm prelaminated MDF board of exterior grade size 600x450mm with 4mm thick half round beading all round of teapoy top as directed.

Long rails

Short rails

Stiffeners

Rubber shoes

Tightening of complete teapoy by suitable size nails & wood corner as directed by Engr-in-Charge on site.

M&L for two or more coat french polish with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

Repair/replacement of following u/s parts of " Table Centre " with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg No. FD-29/235/274/375 & BZ/FD/01 & SK-577 and all directed by Engr-In-Charge:-

S&F new top of 18/19mm prelaminated MDF board of exterior grade size 900x450mm with 4mm thick half round beading all round of table top as directed.

Long rails

Short rails

Rubber shoes

Vaccum Rubber Shoe

12 mm thick Plate Tinted Glass for FD-375 .(Smoke/Black Colour)

Tightening of complete table by suitable size nails & wood corner as directed by Engr-in-Charge on site.

M&L for two or more coat french polish with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

Repair/Relacement of following U/S parts of "Table Writing FD/Med" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg No. FD-33, 249, 275 and directed by Engr-In-Charge:-

S&F new top of 18/19mm prelaminated MDF board of exterior grade size 1145x600mm with 4mm thick half round beading all round of table top as directed.

Leg (35x35x760mm)

Long rails

Short rails

S&F of new sides of box made of 18/19mm thick MDF board as per drg and directed by Engr-In-Charge.

S&F of new door made of 18mm thick MDF board fixed with suitable piano type hinges alongwith 04mm thick teak wood beading & knob / handle as per drg and directed by Engr-In-Charge.

S&F of new self of 18/19mm thick MDF board as per drg and directed by Engr-In-Charge.

S&F of new central leg (150 to 200mm long) of teak wood as per directed by Engr-In-Charge.

S&F suitable new knobs / handle of approved quality.

Rubber shoes

S&F different new parts of drawers : Top/Side/Bottom of existing shape and size made of 18mm prelaminated MDF board & 12 mm thick commercial ply wood with 4mm thick teak wood half round beading as per drg & directed.

S&F of new back ply of 6mm thick as per drg and as directed by Engr-In-Charge.

Tightening of complete table by suitable size nails & wood corner as directed by Engr-in-Charge at site.

M&L for two or more coat french polish with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

Repair/Relacement of following U/S parts of "Table 3'x2' w/o drawer and table examination" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg No. FD-223, 1F(S) , FD-284 and directed by Engr-In-Charge:-

S&F new top of 18/19mm prelaminated MDF board of exterior grade size 900x600mm with 4mm thick half round beading all round of table top as directed.

Legs (30x60x760mm)

Long rail

Short rail

Stiffeners

Rubber shoes

Tightening of complete table by suitable size nails & wood corner as directed by Engr-in-Charge on site.

M&L for two or more coat french polish with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

Repair/Relacement of following U/S parts of "Table 900x900x760mm" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg No. FD-291 and directed by In-Charge

S&F new top of 18/19mm prelaminated MDF board of exterior grade with 4mm thick half round beading all round of table top as directed.

Legs (740x55x35mm)

Rails

Rubber shoes

Tightening of complete table by suitable size nails & wood corner as directed by Engr-in-Charge on site.

M&L for two or more coat french polish with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

Repair/Relacement of following U/S parts of "Chair Dining Long Back" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg No. FD-357 and directed by In-Charge:-

Front legs

Rear legs

Stiffeners

Back straps

Front /side rails

Rubber shoes

S&F suitable new 12 mm thick commercial plywood for seat as shown on drg.

S&F suitable size new foam of 50mm thick & 32 density covered with marking cloth for seat.

S&F suitable new leatherette rexine of existing shape & size complete to match the original seat (rexine shall not be less than 350/- per RM).

S&F suitable new 12 mm thick commercial plywood for back as shown on drg.

S&F suitable size new foam of 50mm thick & 32 density covered with marking cloth for back.

S&F suitable new leatherette rexine of existing shape & size complete to match the original back (rexine shall not be less than 350/- per RM).

Tightening of complete chair by suitable size nails & wood corner as directed by Engr-in-Charge on site.

M&L for two or more coat french polish with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

Repair/Relacement of following U/S parts of "Chair Easy Cushioned (wooden)" with suitable new parts of existing shape & size complete to match the original as shown on drg No. FD 358 and directed by Engr-In-Charge:-

S&F suitable size new synthetic foam of 75mm thick with 32 density for seat.

S&F suitable new leatherised rexine of approved shade texture and quality of existing shape & size complete to match the original seat . (rexine shall not be less than 350.00 per RM).

S&F suitable new synthetic foam of 50mm thick with 28 density for back.

S&F suitable new 06 mm thick plywood complete match the original back as shown on drg.

S&F suitable new leatherised rexine of approved shade texture and quality of existing shape & size complete to match the original back . (rexine shall not be less than 350.00 per RM).

S&F suitable front/rear leg of teak wood .

S&F Rubber shoes .

S&F suitable size new ply & foam for handle as per existing shape and size, covered with thick matching colour rexine as shown on drg.

Tightening of complete chair by suitable size nails & wood corner as directed by Engr-in-Charge on site.

M&L for two or more coat french polish with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

Repair/Relacement of following U/S parts of "Hat Stand" with suitable new parts of existing shape & size complete to match the original as shown on drg No. FD-23, 233, 362 and directed by Engr-In-Charge:-

S&F 4mm thick teak face decorative plywood fixed with fevicol tipped with teak wood edging all round size 1330x710 mm as per drg and as directed by Engr-in-Charge.

S&F of Mirror of size 300x440x5.0mm thick as per drg.

S&F of Aluminium Peg set 120 mm with ISI mark.

M&L for two or more coat french polish with high class finishing after rubbing, scrapping and filling complete all as directed.

Repair/Relacement of following u/s parts of "Binsoiled linen small/large" with suitable new parts of existing shape & size complete to match the original as shown on drg No. FD-70, FD-212, FD-244 and directed by Engr-In-Charge:-

S&F of new legs made of Ist class teak wood as per drawing and as directed by Engr-In-Charge.

S&F new 6mm thick teak face plywood on top of binsoiled linen as shown on drg as directed.

S&F new 6mm thick teak face plywood on both side (front & back) of binsoiled linen as shown on drg as directed.

S&F new hinges (50mm) as approved by GE.

Rubber shoes .

Tightening of complete bin soiled linen by suitable size nails & screw as directed by Engr-in-Charge.

M&L for two or more coats french polishing with high class finishing as directed by engr in charge.

Polishing with French polish (two or more coat) to under mentioned items of furniture article with high class finishing (after rubbing/scrapping/smoothness and filling) to complete side as per existing shape and size in drg No. DB-4121, F-57, F-19, F-91, TP, TP,Spl, FD-86(M) as directed:-

Book self open small

Chest of drawer

Rack Laundry

Table Laundry

Wooden Book Shelfes

Table science large

Table writing small

Testle store Room wooden

Almirah medium wooden with self

Almirah medium wooden 1/2 h & 1/2 s

Repair/replacement of following u/s parts of "Side board" with suitable new parts of existing shape & size complete to match the original as shown on drg No. FD-26(M), FD-241 ,FD-391, FD-1112 and all directed by Engr-In-Charge:-

S&F new shelves made out of 18mm thick prelaminated MDF board exterior grade including beading . .

S&F new top of side board made out of 18mm thick prelaminated MDF board exterior grade with 4mm thick half round teak wood beading.

S&F new doors made out of 18mm thick prelaminated MDF board with beading, fixed with piano hinges.

S&F new 100 mm long handle as per approved by GE.

S&F different new parts of drawers : Top/Side/Bottom of existing shape and size made of 18mm prelaminated MDF board & 12 mm thick commercial ply wood with 4mm thick teak wood half round beading as per drg & directed.

S&F new base made out of 18 mm thick prelaminated MDF board.

S&F new sides made out of 18 mm thick prelaminated MDF board.

S&F new back made out of 18 mm thick prelaminated MDF board.

Tightening of complete side board by suitable size nails & screw as directed by Engr-in-Charge on site.

M&L for two or more coats french polishing with high class finishing as directed by engr in charge.

Repair/Relacement of following U/S parts of " Sofa Set 4/5 Seater" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg No. FD 258,281, 373 and directed by Engr-In-Charge:-

Front/Rear legs

Side rails

Front/rear side long rails

Arm/Handles

Wooden battens

Rubber shoes

Tightening of complete sofa set by suitable size nails & wood corner as directed by Engr-in-Charge at site.

M&L for two coats french polishing of sofa set 5 seater with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drawing as directed by Engr-in- charge.

M&L for two or more coats french polishing of sofa set 4 seater with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drawing as directed by Engr-in- charge.

Re cushioning of sofa set 02,03,04 & 05 seater : Re cushioning of sofa set 02,03,04 & 05 seater : Removing of old u/s cushion foam of sofa set 2,3,4 & 5 seater and S&F new cushion foam 100mm thick and 40density, size 22”x21”x4” duly covered & stiched with new cover made out of superior quality tapestry cloth as approved by GE, not less than Rs. 650/-per meter including markin cloth and one side TKK chain fixed with cover for seat and back as per drg no FD-258, FD-281, FD-373 or as directed.

Repair/Replacement of following U/S parts of "Table Dressing Gents" with suitable size new parts of existing shape & size complete to match the original as per drg no FD-230, 379 and directed by Engr-In-Charge:-

S&F new top of 12mm thick prelaminated MDF board of exterior grade with 4mm thick half round beading.

S&F new bottom of 12mm thick commercial ply with 4mm thick half round beading.

S&F new drawer of 12mm thick prelaminated MDF board of exterior grade as per drg with 4mm thick half round beading as directed.

S&F of knob acrylic of approved quality

S&F of looking mirror of first class quality size 760x380x5.0mm thick as per drg and directed by Engr-in-Charge.

S&F new 6mm thick ply for back side of mirror with hanging clip and iron frame as directed by Engr-in-Charge

Tightening of complete table by suitable size nails & screw as directed by Engr-in-Charge on site.

M&L for two or more coats french polishing with high class finishing as directed by Engr-in- charge.

Repair/Relacement of following U/S parts of " Table Dressing Ladies" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg No. FD 251,378 and directed by Engr-In-Charge:-

S&F drawer of preleminated MDF board 18mm thick exterior grade duly fixed with 4mm thick teak wood beading as per drg and as directed by Engr-in-Charge

S&F suitable new acrylic knob as approved by GE.

S&F frame of first class hard wood (Teak) including 6mm thick ply wood for back side of mirror duly fixed with frame as per drg and as directed by Engr-in-Charge

S&F suitable new electro copper plated mirror of polished sheet glass of first class quality ISI marked size 1220x366x5mm thick as approved by GE.

S&F suitable new table top/bottom of prelaminated MDF board of 18/19mm thick one side teak finish and other side white with 4mm thick half round teak wood beading

S&F suitable new side plank of prelaminated MDF board of 18/19mm thick with 4mm thick half round teak wood beading

S&F suitable size new leg of 1st class hard wood teak as per drg and as directed by Engr-in-Charg.

S&F suitable new plain sliding glass as per drg and as directed by Engr-in-Charg.

Tightening of complete table by suitable size nails & screw as directed by Engr-in-Charge on site.

M&L for two or more coat french polish with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

Repair/Relacement of following U/S parts of "Bed Hard with ply top" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg No. FD-21, 246, 247, SK- and directed by Engr-In-Charge:-

S&F 04 mm thick both side teak face ply all over the head rest of bed including teak wood beading.

S&F 04 mm thick both side teak face ply all over the foot rest of bed including teak wood beading .

S&F new long rail made out of teak wood size1800x90x35mm as per drg and directed by Engr in charge.

S&F new short rail/center stiffner made out of teak wood size 900x90x35mm as per drg .

S&F new clamps for holding of MNF set as per drg and directed by Engr in charge.

S&F new 12mm thick BWR phenol bonded commercial plywood of size 1800x900mm , fitted with suitable nut & bolt complete to match the existing shape and size.

Tightening of complete bed by suitable size nails & wood corner as directed by Engr-in-Charge on site.

M&L for two or more coat french polish with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

Repair/Relacement of following U/S parts of "Table Dining 4 Person (1200x900) " with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg No. FD/MAP/II/03 and directed by Engr-In-Charge:-

S&F new top of 18/19mm prelaminated MDF board of exterior grade size 1200x900mm with 4mm thick half round beading all round of table top as directed.

Long rail

Short rail

Rubber shoes

Tightening of complete table by suitable size nails & wood corner as directed by Engr-in-Charge on site.

M&L for two or more coat french polish with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

Repair/Relacement of following U/S parts of "Table Dining 6 Person" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg No. FD 239, 273 & FD/MAP/II/03 and directed by Engr-In-Charge:-

S&F new top of 18/19mm prelaminated MDF board of exterior grade size 1500x900mm with 4mm thick half round beading all round of table top as directed.

Legs (60x60x740mm)

Long rail

Short rail

Rubber shoes

Tightening of complete table by suitable size nails & wood corner as directed by Engr-in-Charge on site.

M&L for two or more coat french polish with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

Repair/Relacement of following U/S parts of "Table Dining 8 Person" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg No. FD-30, 239, 273 and directed by Engr-In-Charge:-

S&F new top of 18/19mm prelaminated MDF board of exterior grade size 1800x900mm with 4mm thick half round beading all round of table top as directed.

Long rail

Short rail

Rubber shoes

Tightening of complete table by suitable size nails & wood corner as directed by Engr-in-Charge on site.

M&L for two or more coat french polish with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

Repair/Relacement of following U/S parts of " Almirah medium wooden w/s and 1/2h &1/2s" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg No. DB-4042/4176 and directed:-

Repair of almirah door by suitable size nails & wooden pieces as per existing shape & size as directed by Engr-In-Charge

Shelf of almirah w/s

Shelf of almirah 1/2h &1/2s

MS hinges size 65mm

MS CP haps and staple of size 50mm

Tightening of complete almirah by suitable size nails & wood pieces as directed by Engr-in-Charge on site.

M&L for two or more coat french polish with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

Repair/Relacement of following U/S parts of "Almirah large wooden w/s, without self and 1/2h &1/2s" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg No. DB-4116 and directed by Engr-In-Charge:-

Repair of almirah door by suitable size nails & wooden pieces as per existing shape & size as directed by Engr-In-Charge

Shelf of almirah w/s

Shelf of almirah 1/2h &1/2s

MS hinges size 65mm

MS CP haps and staple of size 50mm

Tightening of complete almirah by suitable size nails & wood pieces as directed by Engr-in-Charge on site.

M&L for two or more coat french polish with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

Repair/replace of following u/s parts of " 16 Rifle rack of 5.56 for INSAS and AK-47" with suitable new parts of sheesham wood existing shape & size including re-fixing of locking system as shown on drg No. GE/PN/F/28 and directed:-

S&F Bottom long base of size 4"x4"x29".

S&F Wdn post of size 4"x4"x42".

S&F Top self of size 8"x1-1/2"x58" with groove of existing size.

S&F Middle self of size 10"x1-1/2"x58"with groove of existing size.

S&F Bottom self of size 7"x1-1/2"x58" with groove of existing size.

Tightening of complete rack by suitable size nails & wood corner as directed by Engr-in-Charge on site.

M&L for two or more coats of spray painting (black)/ french polish on steel / wooden surface with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

Repair/replacement of following u/s parts of "16 Rifle rack for CMG" with suitable new parts of sheesham wood existing shape & size including re-fixing of locking system as shown on drg No. GE/PN/F/30 and directed:-

S&F Bottom long base of size 4"x4"x29".

S&F Wdn post of size 4"x4"x40".

S&F Top self of size 8"x1-1/2"x58" with groove of existing size.

S&F Middle self of size 10"x1-1/2"x58"with groove of existing size.

S&F Bottom self of size 7"x1-1/2"x58" with groove of existing size.

Tightening of complete rack by suitable size nails & wood corner as directed by Engr-in-Charge on site.

M&L for two or more coats of spray painting (black)/ french polish on steel / wooden surface with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

Repair/replace of following u/s parts of "16 Rifle rack of 5.56 for INSAS LMG" with suitable new parts of sheesham wood existing shape & size including re-fixing of locking system as shown on drg No. GE/PN/F/29 and directed:-

S&F Bottom long base of size 4"x4"x29".

S&F Wdn post of size 4"x4"x44".

S&F Top self of size 8-1/2"x1-1/2"x58" with groove of existing size.

S&F Middle self of size 10"x1-1/2"x58"with groove of existing size.

S&F Bottom self of size 8"x1-1/2"x58" with groove of existing size.

Tightening of complete rack by suitable size nails & wood corner as directed by Engr-in-Charge on site.

M&L for two or more coats of spray painting (black)/ french polish on steel / wooden surface with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

Repair/replace of following u/s parts of " 16 Rifle rack of 5.56 for Insas " with suitable new parts of sheesham wood existing shape & size including re-fixing of locking system as shown on drg No. GE/PN/F/24 and directed:-

S&F Bottom long base of size 4"x4"x29".

S&F Wdn post of size 4"x4"x44".

S&F Top self of size 14"x1-1/2"x58" with groove of existing size.

S&F Middle self of size 9-2"x1-1/2"x58"with groove of existing size.

S&F Bottom self of size 7-3"x1-1/2"x58" with groove of existing size.

Tightening of complete rack by suitable size nails & wood corner as directed by Engr-in-Charge on site.

M&L for two or more coats of spray painting (black)/ french polish on steel / wooden surface with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

Removing of u/s table top and S&F New top of prelaminated MDF board of 18/19 mm thick size as per drg No. FD-41(M), 224,283 with 4mm thick teak wood half round beading all round of table top including two or more coat french polish with high class finishing (after rubbing/scrapping and filling) and tightening as directed by Engr-In-Charge:-

Table 900x600x760mm with drawer

Table dining of sorts

Table writing cadet

Table dining Special

Table office clerk 'W'

Table office officer 'W'

Repair/Relacement of following u/s parts of "Sofa two seater (Make-godrej silver)" with suitable new parts of existing shape & size complete to match the original as directed by Engr-In-Charge:-

Removing of U/S & rusted legs and S&F new 200mm long round legs made out of 2mm thick stainless steel as per directed by Engr-In-Charge.

Removing of U/S seat cushion of sofa set two seater and S&F new seat cushion made out of 100mm thick 40 density foam as per existing shape and size and as directed by Engr-In-Charge.

Removing of U/S foam with leatherette rexine and S&F New 50mm thick, 32 density foam fixed on seat, back and arms as par existing shape and size covered with leatherette rexine (black colour) , not less then Rs.350/- RM (as approved), fitted on 12mm thick ply wood including plastic niwar tape & cotton as drected.

Repair/Replace of following U/S parts of "Table Bed Side" with suitable new parts of existing shape & size complete to match the original as shown on drg No. SK-572 FD-248 FD-276 and directed by Engr-In-Charge:-

S&F new side planks of size 230x510mm, made out of 18/19mm prelaminated MDF board of exterior grade ,one side teak finish and other side white with 4mm thick half round teak wood beading as per drg.

S&F new top of size 230x450mm, made out of 18/19mm prelaminated MDF board of exterior grade ,one side teak finish and other side white with 4mm thick half round teak wood beading as per drg.

S&F new 6mm thick back ply of size 510x450mm as per drg.

S&F different new parts of drawers : Top/Side/Bottom of existing shape and size made of 18mm prelaminated MDF board & 12 mm thick commercial ply wood with 4mm thick teak wood half round beading as per drg & directed.

S&F new shelf made out of 18/19mm prelaminated MDF board of exterior grade ,one side teak finish and other side white with 4mm thick half round teak wood beading as per drg.

S&F new knobs for drawers as approved by GE.

Rubber shoes

Tightening of complete table bed side by suitable size nails as directed by Engr-in-Charge on site.

M&L for two or more coat french polish with high class finishing after rubbing scrapping, filling complete all as directed by Engineer-in-Charge.

Repair/Relacement of following U/S parts of "Wooden Bench and Desk" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg No. TP and directed by Engr-In-Charge:-

S&F new top of 18mm thick teak wood ,size 610x380mm complete to match the original as shown on drg No. TP and directed by Engr-In-Charge.

S&F new foot rest of 18mm thick teak wood ,size 515x75mm complete to match the original as shown on drg No. TP and directed by Engr-In-Charge.

Tightening of complete Wooden Bench and Desk by suitable size nails & wood corner as directed by Engr-in-Charge on site.

M&L for two or more coat Melamine wallnut polish with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg No. TP as directed by Engr-in- charge.

Repair/replacement of following u/s parts of "Chair with cushion w/o arms " with suitable new parts of existing shape & size complete to match the original as shown on drg No. Spl Drg and all directed by Engr-In-Charge:-

S&F of front legs made of first class HW teak as per drg No. Spl Drg and directed by Engr-in-Charge.

S&F of rear legs made of first class teakwood as per drg No. Spl Drg and directed by Engr-in-Charge.

S&F of front rail for seat made of 1st class hard wood teak as per drg No. Spl Drg and as directed by Engr-in-Charge.

S&F of stiffeners made of first class HW teak as per drg No. Spl Drg and directed by Engr-in-Charge.

S&F of foam cushion (seat) 40 density with 3" dia duly fixed with chair having cost of cover not less than 200/-per mtrs all as drg No. Spl Drg and as directed by Engr- in- charge. (Make-Flexi puff/ sleep well/ kurlon/ feather foam)

M&L for two or more coats french polishing with high class finishing including necessary rubbing, denting and smoothness surfaces all as directed by engr in charge. (Make-Asian/Berger/Nerolec)

Repair/Relacement of following U/S parts of "Board Notice 8'x4' " with suitable new parts of existing shape & size complete to match the original as shown on drg No. FD-99 and directed by Engr-In-Charge:-

S&F new 5mm thick glass of size 4' x4' as directed.

Tightening of complete board by suitable size nails & wood corner as directed by Engr-in-Charge on site.

M&L for two or more coat french polish with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.

Repair/replacement of following u/s parts of "Book Case" with suitable new parts of existing shape & size complete to match the original as shown on drg No. FD-112 and all directed by Engr-In-Charge

S&F new top made out of 18mm thick prelaminated MDF board exterior grade as shown on drg No. FD-112 and all directed by Engr-In-Charge. .

S&F new shelves made out of 18mm thick prelaminated MDF board exterior grade.

S&F new doors made out of 18mm thick prelaminated MDF board with beading, fixed with piano hinges.

S&F new 100 mm long handle as per approved by GE.

S&F new base made out of 18 mm thick prelaminated MDF board.

S&F new sides made out of 18 mm thick prelaminated MDF board.

S&F new back ply of 6mm as shown on drg and directed

S&F of new legs made of Ist class teak wood as per drawing and as directed by Engr-In-Charge.

Tightening of complete side board by suitable size nails & wood corner as directed by Engr-in-Charge on site.

M&L for two or more coats french polishing with high class finishing as directed by engr in charge.

Raghav supplier & contractor

M R Taders