TENDER FOR CIVIL/ INTERIOR/ ELECTRICAL/HVAC WORK FOR 7 SUB REGISTRAR OFFICES (BHAVNAGAR CITY-1, PALITANA, TALAJA, SHIHOR, JESAR, LILIYA, RAJULA).

No. Description Quantity Unit Rate Total Amount

No. Description Quantity Unit Rate Total Amount

Dismentaling tiled of stone floors laid in mortar including

1 stacking of serviceable materilas and disposal of 150.81 Smt 70.70

unserviceable materials with all lead and lift.

Dismentling doors, windows, ventilators etc. (wood or steel)

shutters including chowkhats architraves, holdfasts and

2 other attachment etc. complete and stacking them within all 8.00 Each 151.50

lead and lift. (i) Not exceeding 3 Sq.M. in area.

Removing and scraping of old deteriorated plaster of any

thickness fromm wall / R.C.C member including stacking of

serviceable material and disposal of unserviceable from site

of work with all lead and lift

Removing dry or oil bound distemper by a washing and

scraping and sand papering the wall surface smooth

including necessary repairs to scratches complete.

Demolition of existing False Ceiling including stacking of

5 serviceable materilas and disposal of unserviceable 203.54 Smt 53.53

materials with all lead and lift.

Providing and laying cement concrete flooring 1:2:4 (1

Cement:2 Coarse Sand : 4 Stone aggregate 20 mm nominal

size) adding polypropaline nylone fibers in 6 mm length at

the dosage of 125 gm/ bag of cement ( Avg. bedding

thickness 50 mm thick) etc complete as directed by

enginner-in-charge.

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./ Sq.Cm in foundation

and plinth in Cement Mortar 1:5. (1 Cement : 5 -fine

sand)(B) Conventional

Providing 15mm thick cement plaster in single coat on

Rough (Similar)side of single or half brick walls for interior

8 plastering upto floor two level and finished even and 91.29 Smt 252.50

smooth in (i) Cement mortar 1:3 (1cement: 3-sand)

Providing 20 mm thick water proof cement plaster using

water proofing powder 1Kg/ 1bag of cement for all floors on

brick/ concrete wall work using water proofing materials in

CM 1:4 (1 cement 4 coasrse sand) including finishing with a

flooting coat of neat cement slurry etc complete for all floor.

9 and shall be guaranteed for minimum period of 10 years 15.64 Smt 292.90

after handing over the completed building by the main

contractor to be finished as directed. Stamp paper guarantee

10 years to be furnished before receiving any payment from

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE, BHAVNAGAR CITY-

1 Dist- BHAVNAGAR.

No. Description Quantity Unit Rate Total Amount

No. Description Quantity Unit Rate Total Amount

Providing and applying two coats of Birla or Asian acrylic

lapy (putty) & two coats of primer of approved brand and

manufacture on new wall surface to give an even shade

including thoroughly brushing the surface free from mortar

dropping and other foreign matter and sand papered

smooth and Wall painting (three coats) with plastic

emulsion paint of approved brand and manufacture on

under coated wall surface to give and even shade including

throughly brushing the surface free from mortor droppings

and other foreign matter and sand paperd smooth on new

work to give an even shade for all height

Providing and fixing standared extruded of domal

alluminium section of size 50 mm x 25 mm x 1.2mm (Jindal

or equivalent) with colour anodized 60 micron alluminium

frame for ventilation with 5 mm thick frosted glass as details

etc complete for Ventilation

Providing and laying 18 mm thick polished granite stone

machine cut in single piece (Max. available) in sill and jambs

of door , window, ventilation & lift wall cladding, staircase

flooring landing, risers & treads, skirting laid over 10 mm

thick cement mortar 1 : 3 (1 cement : 3 coarse sand) and

12 jointed with grey cement slurry with matching pigment incl. 5.94 Smt 2,716.90

rubbing and polishing,half rounding edge and incl. fixing of

hilty fastener at every 1/3 span of sill as required size etc.

complete colour and shed as approved by architect engineer

Providing and fixing Sand which type Granite platform

including supplying and fixing granite stone 18 mm thick

mirror polished 1st quality Granite stones in top and side

posiition and vertical strip at front over 25 mm thick

13 polished kotah stone platform fixing in top and sides and 0.85 Smt 3,535.00

itermediates supports fixing with cement mortar and

adhesivee and finishing including cutting for fixing of sink

any size (as directed by engineer incharge) at required

position etc complete.

Providing and laying Ceramic tiles (600mm* 600 mm) 8-10

mm thick in flooring treads of steps and landing laid on a

14 bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse 2.34 Smt 981.72

sand) finishing with flush pointing in white cement.

Providing and laying coloured glazed tiles of the size

mm x 450 mm x 8 mm in skirting, risers of steps and dedo

15 on 10 mm. thick cement plaster 1:3 (1 cement : 3 coarse 7.77 Smt 1,111.00

sand) & jointed with white cement slurry.

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE, BHAVNAGAR CITY-

1 Dist- BHAVNAGAR.

No. Description Quantity Unit Rate Total Amount

No. Description Quantity Unit Rate Total Amount

Providing laying and jointing in true line and level 15 mm

dia. U.P.V.C. Pipe (SCH -40) line including fittings of standard

make as apprroved by Engineer In charge. Pipe shall be

fixed on the wall with the help of clamp at every two meter

C/ C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 25 mm

dia. U.P.V.C. Pipe (SCH -40) line including fittings of standard

make as apprroved by Engineer In charge. Pipe shall be

fixed on the wall with the help of clamp at every two meter

C/ C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 40 mm

dia. U.P.V.C. Pipe (SCH -40) line including fittings of standard

make as apprroved by Engineer In charge. Pipe shall be

fixed on the wall with the help of clamp at every two meter

C/ C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all materials.

Providing, laying and jointing in true line and level

diametre U.P.V.C (Type B) conforming to IS 13592-1992

with one end plain and other end socketed with rubber ring,

& fittings conforming to ISI 14735-1999 of approved make

for drainage system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on wall using

19 of PVC clamp of the size 110 mm diametre x 149 mm length 5.50 Rmt 835.15

x 145 mm heigh at every 2000 mm center to center or shall

be concealed in walls as directed including necessary fittings

such as bends, shoes etc. including testing of pipes and joints

and jointed with adhesive solvent cement including cost of

Providing, laying and jointing in true line and level

diametre U.P.V.C (Type B) conforming to IS 13592-1992

with one end plain and other end socketed with rubber ring,

& fittings conforming to ISI 14735-1999 of approved make

for drainage system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on wall using

of PVC clamp of the size 160 mm diametre x 210 mm length

x 196 mm heigh at every 2000 mm center to center or shall

be concealed in walls as directed including necessary fittings

such as bends, shoes etc. including testing of pipes and joints

and jointed with adhesive solvent cement including cost of

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE, BHAVNAGAR CITY-

1 Dist- BHAVNAGAR.

No. Description Quantity Unit Rate Total Amount

No. Description Quantity Unit Rate Total Amount

Providing and fixing wash down wall hung water

closet(European type) of jaquar or equivalent with integral

'P' trap jointed within C.I pipe in C:M 1:1 including matching

seat cover, chair braket, Conceled metropole of jaquar or

21 equivalent, 2 way bibcock of jaquar or equivalent, health 1.00 Each 17,837.61

foucet of jaquar or equivalent with 1 m extension pipe, toilet

paper holder of jaquar or equivalent with all accessories etc.

Providing and fixing table top wash basin on 18mm thick

black shade polished granite for top with 2 Nos. of C.I. Heavy

bracket with 1 Nos. of wash basin Jaquar brand or

equivalent, C.P. brass Jaquar pillar cock or equivalent, angle

22 valve or equivalent, C.P. brass extension nipple 62mm long, 1.00 Each 13,123.94

S.S. flange water super connection pipe 60cm. long and full

thread waste coupling includingm, bottle trap making hole

in granite for wash basin etc. complete. (For all floor)

Providing and fixing Kitchen sink with C.I. or M.S. brackets,

painted white including cutting holes in walls and making

good the same but excluding fittings. (C) Vitreous China

Sink.(i) 600mm x 450mm x 150mm size

Providing and fixing 600mm x 450mm Bevelled edge

mirrror of superior glass mounted on 6mm thick A.C. sheet

or plywood sheet and fixing to wooden pluge with C.P. brass

screws and washers.

Providing & Fixing C.P Brass waste for washbasin or sink (a)

Providing, fixing, testing & commissoning of GI Angular

Stopcock of jaquar FLR-CHR-5053N or Cera CSC 202, Kohler

26 K-16517 IN with necessary specials, unions, nipple, GI bolt 1.00 Each 1,336.23

nut ,EPDM rubber washers as per drawing & specifications

etc. complete 15 mm dia.

Providing, fixing, testing & commissoning of GI flanged end

lever operated butterfly valve of jaquar FLR-CHR-5083N or

Cera CSC 202, Kohler K-16517 IN with necessary specials,

unions, nipple, GI bolt nut, EPDM rubber washers as per

drawing & specifications etc. complete 40 mm dia.

Providing and fixing pillar tap, capstan head, screw down

28 high pressure with screws, shanks and back nuts. (i) 15mm 1.00 Each 308.73

Providing and fixing PVC SWR Nahni trap IS 14735 for drain -

100 mm diameter with jali of the following nominal

29 diameter of self cleansing design with C.I scread down or 3.00 Each 558.36

hinged grating including the cost of cutting and making good

Providing and fixing screw down two way bib taps of 15mm

30 dia- Brass down brigh polished jaquar code no. FLR-5041N 2.00 Each 186.83

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE, BHAVNAGAR CITY-

1 Dist- BHAVNAGAR.

No. Description Quantity Unit Rate Total Amount

No. Description Quantity Unit Rate Total Amount

Providing and fixing chromium plated brass half trun flush

cock of approved quality including fixing in pipe line etc.

Providing & fixing CP brass double coat hook (Jaquar- ACN-

1161N) complete.

Providing & Fixing soap dish of jaquar or equivalent make or

as directed and complete.

Removing Exisitng AC & window grill as per instruction &

fixing existing grill with require hardware,adhesive material

34 & welding with proper finish as per architect /Grimco 1.00 Job 25,250.00

Engineer in charges instruction.

cleaning office glass ,wall window ,table with required

material broom ,dust pan ,squeegee, sprey cleaner,mop as

per instruction by Architect /Grimco Engineer in charge.

Demolition of existing civil work ,interior ,ELV,MEP &

electrical work including stacking of serviceable materials

36 and disposal of unserviceable materials with all lead and lift 1.00 Job 18,180.00

as per instruction of architect /Grimco Engineer in charge.

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse

sand) on new surface or fixing on existing flooring by

adhesive material including dismentaling of existing flooring

and jointed with color cement slurry including finised with

flush pointing & cleaning the surface etc. complete for DARK

shade /light shade

Providing & fixing handicape tractile tiles (shelf adhesive

)the tiles shall be fixed with suitable adhesive /scrue

material with all required additional hardware support or

tiles laid on 20 bed of 20 mm (avg) base of cement mortar

1:6 (1 cement :6 Coarse sand ) on new surface /old surface

38 with 4 mm epoxy and joined with colour cement slurry 13.50 smt 6,464.00

including finishing with flush pointing & cleaning the

surface etc rate shall be including transportation ,all floor

hardware ,adhesive material etc as per architect /Grimco

Engineer in charge.

Providing ,removing ,existing door closer and fixing door

closer and blue space solid standoffs heavy -duty

39 commercial grade -304 stainless steel push pull door handle 4.00 Nos 2,777.50

rate shall be including fitting charge.as per architect /grimco

engineer in charge.

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE, BHAVNAGAR CITY-

1 Dist- BHAVNAGAR.

No. Description Quantity Unit Rate Total Amount

No. Description Quantity Unit Rate Total Amount

Door laminate change.to be removed & rifixing providing &

fixing both side 1 1mm laminate & existing removing

laminate door or washable type material of good quality

with appropriate adhesive of approved quality like fevicol or

its equivalent brands with smooth finishing and in line level

with regular edges as per requirment and site situation

including cutting and necessary cut outs of glass and cut out

finish with plywood with selected laminate & door if any

required etc complete in all respects all rates are inclusive of

hardware like nails , screws , abro taps ,adhesive etc

Demolition and disposal of unserviceable materials with all

lead and lift.(i) Lime concrete.

Providing and laying cement concrete 1:2:4 (1- Cement : 2-

Coarse sand : 4- graded stone aggregates 20 mm nominal

size) and curing complete excluding cost of formwork in (A)

Foundation and Plinth

Provdg. & Fixing low/full height Storage rack ready to

assemble type, self-standing, over hanging or partition

mounted storage system having size 900mm length, 750mm

height and 450 mm. depth. Carcass and shelves: Made from

18mm flat laminated panels of 16mm BWR calibrated ply

covered with 0.8 mm High pressure laminate on both side

glued with PUR glue, 0.8mm thick PVC edge bands glued

with hot melt Glues. The shelves are connected with body

43 through adjustable shelf supports Back Panel: 3mm high 35.73 Smt 8,585.00

pressure compact sheet both side laminated hold in slit

formed in the body. Shutters: Made from Flat laminated

Plywood with 1 mm High pressure laminate on both side

glued with PUR glue,with 2 mm thick PVC edge bands.

Shutters should be of sliding mechanisum as per selection.

etc. complete as directed by engineer in-charg

Two Seater Sofa (B) (1400mmx750mmx750mm.)

Providing and constructng Two seater sofa in size of

(1.40x0.75x0.75) & made from 19mm.thick ply as a base and

support of the seat area as per drawing and back side of the

sofa is also made from 19mm. Thick ply wood make a box

with screw and nail used, than 4" U-foam 40 density use in

base and back of sofa with 2" thick super sofa U-foam use

adhesive and cover with selected foam leather, in handle

44 used 1.5" thick U- foam and and back side of the sofa also 1.00 Each 24,745.00

cover with 0.075 thick U-foam & whole sofa box rest on

25mm.x25mmx3mm. S.S. angle and sdie and back support

by 3/4" 19.5mm guage S.S. pipe fitting as per instruction of

engineer-in-charge, and consultant. whole sofa box is rest on

s.s. 0.75"dia support as per drawing & instruction of site

Engineer-In-Charge and Consultant.

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE, BHAVNAGAR CITY-

1 Dist- BHAVNAGAR.

No. Description Quantity Unit Rate Total Amount

No. Description Quantity Unit Rate Total Amount

Providing and fixing Center Tipoi 18mm. thick plywood box

with 1mm. thick laminated in the approved shade on 18mm

thick plywood square leg(shown in detailed drawing) with

1mm. thick selected laminate. top with toughen glass 18 mm

thick. Leg rest on round S.S. stud support with PVC buffers

in legs and all materials and labour etc. complete as per

detailed drawing and instructions of engineer-in-charge and

Providing & Fixing office Table, Modular Table of size:

1500W x 750D x 750mmH, Table Top-Made of 25mm thick

Prelaminated Board and 0.8 mm thick both side laminate of

approved shade, edge banded with matching 2 mm thick

PVC lipping. Modesty Panel-Made of 12 mm thick thk BWR

Ply, 1 mm thk laminate both side with 2 mm thick PVC edge

banding in approved shade. Understructure Made of 25mm

thick P and approved shade laminate, edge banded with

46 matching 2 mm thick PVC lipping. Metal leveler shall be 1.00 Each 13,635.00

provided at the bottom of understructure to adjust the

uneven floor level up to 5-10 mm. Integrated Pedestal- The

pedestal unit size of 400 (w) X 450(d) X 650(ht)mm. The

pedestal unit shall be made out of 18 mm thick BWR

plywood. including Drawer Channels, SS Hinges, SS Handles,

Locks etc. complete as directed by engineer in-charge.

Providing & Fixing Side Table ready to assemble type, self-

standing, over hanging or partition mounted storage system

having size 1200/900mm length, 750mm height and

450mm. depth. Carcass and shelves: Made from 18mm flat

laminated panels of 16mm BWR calibrated ply covered with

0.8 mm High pressure laminate on both side glued with PUR

glue, 0.8mm thick PVC edge bands glued with hot melt Glues.

The shelves are connected with body through adjustable

47 shelf supports Back Panel: 3mm high pressure compact 1.00 Each 5,555.00

sheet both side laminated hold in slit formed in the body

Shutters Made from Flat laminated Prelaminated Board with

1 mm High pressure laminate on both side glued with PUR

glue, with 2 mm thick PVC edge bands Shutters should be of

sliding mechanisum as per selection. etc. complete as

directed by engineer in-charge..

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE, BHAVNAGAR CITY-

1 Dist- BHAVNAGAR.

No. Description Quantity Unit Rate Total Amount

No. Description Quantity Unit Rate Total Amount

Providing & Supplying High Back Revolving Chair having

Seat & back cushioned on ply, aluminum die casted PU arms

with cushioned pad, The mechanism of the chair have

following features: 360⁰ revolving type 2.5mm Thk CRCA

seat plate with 3.5mm thk CRCA channel plate push back

Mechanism, Tilt tension adjustable, Single position locking,

Plastic component inside the mechanism of Grade - MI

and Epoxy Powder coated 70 Microns with tested 1.2 lacs

cycles as per BIFMA Standard The chair have be provided

with pneumatic height adjustment, chrome base Including

upholstered with letherette all materials and labour as per

instruction etc complete or as directed by engineer in

Low Back Chair (Staff)

Providing and Supplying a Low Back Chair Heavy Duty

Cushion of 32 Densities and cotton Base Mesh. Seat, Front

side with cotton Mesh and back side with designer PP

material, Metal Base with Chrome Finished and Nylon Twin

Wheel Castors according to BIFMA standard for long life and

heavy duty, BIFMA standard tested heavy duties hydraulics

for ling life, fixed PU Arm Rest, Central tilt mechanism and

seat cover common black, back rest colour - Navy

Blue/Black as per instruction of Engineer-In-Charge and

Medium Back Chair

Providing and supplying a Medium Back Chair Heavy Duty

Cushion cover with the Mesh, Cushion 40 Density, Cotton

Mesh back rest, framed in designer PP with adjustable

lumber support, Base and Nylon Twin Wheel Castors

according to BIFMA standard for long life and heavy duty,

BIFMA standard tested heavy duty hydraulics for long life,

Fixed PP arm rest, Synchro tilt mechanism with any

positioning locking mechanism, One year warranty, Colour

black , selection of chair should be as approved by Engineer-

In-Charge and Consultant.

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE, BHAVNAGAR CITY-

1 Dist- BHAVNAGAR.

No. Description Quantity Unit Rate Total Amount

No. Description Quantity Unit Rate Total Amount

WORKTOP to be made of 25 mm thick Prelaminated particle

board with machine pressed 2.0mm PVC edge band on all

sides. Worksurface HT shall be 750mm

STRUCTURAL SUPPORT SYSTEM:- Benching or Linear

Workstation shall be constructed using 50 x 50 mm MS Pipe

with caps & levellers for legs & 40 x 40 mm MS Powder

Coated Pipes for cross members with brackets for best

TILE BASED PARTITION SYSTEM - The Main partition

60mm thick and Return Partition 28mm thick & 1200mm ht.

51 With top Panel in Pinup Fabric Board / Fabric of approved 15.00 Each 16,160.00

shade and color per workstation , lower panel in laminated

finish on both sides. All trims in anodized/ Powder Coated

finish. Partition system have adequate raceway at Single and

double level for running data & power cables. (Raceway

Above the Table Top Considered)

PED 3 MS DWR (2B+1F) WITH LEVELER 406LX459DX680H -

to be made of 18mm thick Prelaminated Partical Board.

With PVC Edge band. Consist of 3 no of Metal Drawer set

with SS C-TYPE Handle.

Waiting Chair : Providing & Fixing 4 Seater Waiting Chair -

Cross Beam made of black powder coated regular MS ERW

tube having 8.0+/-0.03 cm x 4.0 +/- .03 cm x 0.2 +/-

cm size. Legs to be chrom plated made of rolled steel with

0.12 +/- 0.013 cm thinkness.Seat and Back Shell to be

peforated made from cold rolled M.S. Sheet (DIN 1623 Part

ST -12 Grade), 0.14 +/- 0.013 cm thickness. The side Bar is

made of chrome Plate solid steel 3.0 cm +/- 0.03cm x 1.2 cm

+/- 0.03 cm with fluting and plastic inserts. The Shell to be

assembled on the cross beam with help of M8 Bolts.

WALL PUNNING WORK : Providing and applying minimum

12 mm thick in Wall and minimum 6 mm thick in ceiling,

including all labors, tools, tackles, scaffolding, surface

preparation, mixing of material, transportation (lead & lift)

applying in position, Leveling, finishing, cleaning etc.

complete to satisfaction of EIC. The rate also include making

of grooves above skirting, dado tiles and around window

and door jambs etc. (cost of Bonding agent to the ceiling or

RCC surfaces is to be included in the item). item shall be

used as per instruction of architect/ GRIMCO Manager.

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE, BHAVNAGAR CITY-

1 Dist- BHAVNAGAR.

No. Description Quantity Unit Rate Total Amount

No. Description Quantity Unit Rate Total Amount

Laminate finish wall paneling : Providing & Fixing wall

paneling made from 50mm x 25mm x 1.2mm aluminum

framework at 600 mm x 600mm C/ C both vertically &

horizontally covered with 12mm thick commercial plywood

54 (IS:303) grade with 1.0 mm thick laminate of approved 3.65 Smt 7,575.00

make finished with groove pattern and design completed as

directed by Project manager/ Architect. with as per the

sample approved by the Architect.

Providing and fixing fully glazed & fully paneled aluminium

partition as per detail drawing with frame of coloured

anodized aluminium section of size 63 mm x 38.10 mm x1.2

mm (of Jindal section No. 2434, @ Wt. 0.64 Kg per mt) and

mm thick (Modi Float or Saint Gobain brand) ground glass

(Frosted or obscured on one side) fixed with rubber gasket

at top & 5 mm thick laminated compact sheet at bottom

including glazing clip of size 19 mm x 17 mm weight @

kg/m etc.complete as direction of Engineer In charge.

Providing and fixing partly glazed & partly paneled

aluminium partition as per detail drawing with frame of

coloured anodized aluminium section of size 63 mm x

mm x1.2 mm (of Jindal section No. 2434, @ Wt. 0.64 Kg per

mt) and 5 mm thick (Modi Float or Saint Gobain brand)

56 ground glass (Frosted or obscured on one side) fixed with 57.18 Smt 6,999.30

rubber gasket at top & 5 mm thick laminated compact sheet

at bottom including glazing clip of size 19 mm x 17 mm

weight @ 0.12 kg/m etc.complete as direction of Engineer In

Providing and fixing flush door both sides laminated and

I.T.W. beading all around by using I.T.W. frame 120 m.m. x

80m.m.. shutter fabricated from 35 mm thick solid core

malemine faced three layered pre laminated flat pressed

wood based exterior grade bonded BWP/BWR synthetic

resin having stamped IS 12823 grade I type II including

57 three coats of lacquer polishing to exposed wooden surfaces 13.23 Smt 8,585.00

and Stainless steel decorative type designs fixtures /

fastening 2Nos. Handles, 2Nos. Aldropes, towerbolt etc.

including I.T.W. triangular batten patti of size

30m.m.x30m.m.etc. as per architectural detailed drawing

and as directed by engineer in charge..

Providing and fixing hydraulic door closer of approved size

58 and made such equivalent as directed. all lift, level and leads. 10.00 Nos. 858.50

(work for all the floors)

Providing & Fixing 12 mm thick Tuffan Glass Door with glass

to glass hinges Fixed on Heavy Duty Floor Spring and towel

bar handle and necessary accessories with jointing with

silicon etc. Complete.

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE, BHAVNAGAR CITY-

1 Dist- BHAVNAGAR.

No. Description Quantity Unit Rate Total Amount

No. Description Quantity Unit Rate Total Amount

Providing and fixing Three Track Domal window having

extruded aluminum Colour anodized 60 micron Sliding

section outer frame size 80 mm x 45 mm weight 1.555 kg/

m (Jindal Section code : 21376) and shutter frame 27 mm x

65 mm weight 0.851 kg/ m (Jindal Section code : 21490) and

Section inner patti size 38.70 mm x 28.50 mm weight

kg/ m (Jindal Section code 19453), mosquito jali channel -

mm x 15 mm x1.20 mmx1.20 mm weight.118 kg/ m (jindal

section code 15784) with 5 mm clear Frosted Glass (Modi or

Saint Gobain) and including all accesible accesories

complete etc. or as directed Engineer in charge.

Providing and Fixing 5% Sun Screen Roller Blind with

Superior Quality Acmeda Mechanism including all necessary

fittings like Bracket Chain etc. Complete as per instructions

of Engineer In-charge.

Gypsum False Ceiling-Providing and fixing gypsum board false

ceiling using standerd company section (gyp frame) consists at G.I

perimeter channels of size 0.55 thick having one flange of 20 mm

and another flange of 30 mm and web of 27 mm along with

perimeter of ceiling, screws fixed to brick work/ concrete/

partition with help of nylon sleeves and screws at610 mm centre.

The suspending G.I. intermediate channels of size 45 mm (0.9 mm

thick with 2 flangs at 15mm each from the soffit at 1220 mm

centrewith ceiling angles of width 25mm x 10mm x 0.5 mm thick

62 fixed to soffit withG. I cleat and steel expansion fastners ceiling 203.54 Smt 1,212.00

section of .55 thick having kurled web 51.5 mm and 2 flangs at

mm each with lip at 10.5 mm are fixed to intermediate channel

with help of connecting clips and in direction perpendicular to the

intermediate channel at 450mm centre to centre including

mm tapered edge Gyp board conforming to IS 2095 – 1982 is then

screw fixed to ceiling section with 25mm dry wall screws of

approved quality and make at 230mm centre, screw fixing is

donemechanically with drilling machine with suitable attachment.

Finally tapered edges at the cupboard are to be joint and finished

Providing and fixing 3 mm thick PVC sheets as signage and

display of health signs/information of required size having

retro reflective letters/design as per requirement, fixing the

63 same through approved adhesive etc. complete work shall e 5.00 Each 606.00

carried out as per instruction of Engineer-in-charge

(Approved make PVC foamed sheet only) (45 x 15 cms.)

Supplying and fixing Board & Sinages with 3mm thick

exterior grade ACP of Aludecore, Alstrong or Eurobond

brand with Vinyl letters [Non Reflective] including propore

M.S. Structure of 45x45mm Hollow square box section of

20guage with one coat of Anticorrossive paint and two coat

of oil paint with required anchoring fastners etc.complete as

per directed.[A] Main board

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE, BHAVNAGAR CITY-

1 Dist- BHAVNAGAR.

No. Description Quantity Unit Rate Total Amount

No. Description Quantity Unit Rate Total Amount

MASS STORAGE SYSTEM (COMPACTOR)

Providing and installation of Compactors , as per layout

plan, with knock down construction mechanical driven

mechanism made of 1mm thick CRCA steel confirming to IS:

513GR.D, Under carriage shall have a welded frame made of

HR Sheet 3.15mm thick. The steel parts shall be pretreated

and then epoxy powder coated with approved colour with a

dry film thickness of minimum 40 microns thickness.

(A) Double Faced Mobile Unit

Providing and erecting Inverter based approved make split

air-conditioning unit consisting of condensing unit with

variable speed fan motor, inverter type hermetically sealed

rotary compressor with accessories etc. duly connected

separately erected evaporating unit and blower motor with

its accessories by means of extra supplied proper insulated

copper tubing,drain PVC pipes suitable for ( cost includes

Eco Friendly green gas charging and 15A plug top & Remote

Control & MS Stand) with necessary core cutting.(B) for

ton capacity - Premium Cat.

Providing and erecting approved make Cassette type split

air-conditioning unit consisting of condensing unit with fan

motor, hermetically sealed scroll/rotary compressor with

accessories etc. duly connected separately erected

67 evaporating unit and blower motor with its accessories by 2.00 NOS 60,847.45

Eco friendly Green gas charging & Internal copper wiring &

Remote control ( 3 star and above of current year) with

necessary core cutting. (C) for 2 ton capacity

Supplying and erecting insulated pair of soft copper tubing

open or concealed including power and control

cable,necessary PVC drain pipes for Split AC machine up to

Miniature circuit breaker single pole 6A to 32A suitable to

69 operate on 240 V A.C. system and having breaking capacity 10.00 Ea. 131.30

10 KA to be erected in existing box. confirming to IS

8828/1996 with ISI Mark. Cat.III

Providing & erecting 240 V MCB double pole switch for

motor & inductive load (C Curve) having 10 KA breaking

capacity & confirms to IS : 8828 in existing box having

following capacity (A) 6 to 32 Amp. Cat -III

Providing & erecting415 V MCB double pole switch for

motor & inductive load (C Curve) having 10 KA breaking

capacity & confirms to IS : 8828 in existing box having

following capacity (A) 40 Amp. Cat -III

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE, BHAVNAGAR CITY-

1 Dist- BHAVNAGAR.

No. Description Quantity Unit Rate Total Amount

No. Description Quantity Unit Rate Total Amount

Providing and erecting Sheet Steel powder coated Vertical

MCB distribution board (VTPN) - flush / surface mounted

double door (IP54) fitted with copper insulated busbar,

isolated neutral bar, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3, suitable for 250 AMP TPN

72 MCCB + RCCB as incomer and three phase outgoing as per 2.00 nos 3,437.03

following .(The DBs should be used of same company of

MCB to be used) (B) Three phase incoming and single phase

horizontal type ongoing per phase isolation type (PPI)

(b)sheet steel double door (ii) 6 way

providing & erecting Approved make ELCBs / RCCBs

conforming to IS: 12640 and having sensitivity of 30 mA and

Short Circuit withstand capacity of 6 KA and suitable for

operation on single phase 240 V. having characteristic of

quick action & tripping with all advance feature & do not

incorporate any electronic component.for following Max.

rating erected as directed. (ii) 40Amps. DP cat -iii

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

cable multistrand Aluminium conductor for 1.1 KV. to be

74 laid on wall with necessary clamps or in existing trench / 215.00 mtr 176.75

pipe of following size of cables (A) 4 core 16 Sq. mm

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

cable multistrand Aluminium conductor for 1.1 KV. to be

75 laid on wall with necessary clamps or in existing trench / 105.00 mtr 161.60

pipe of following size of cables (A) 4 core 16 Sq. mm

solder less crimping type alluminium lugs conforming to IS

suitable for cable of following size evenly crimped with high

76 pressure to cl & connected to switch gear terminals with 12.00 Nos 14.14

brass /cadmium plated nut bolts in an approved manner.(b)

solder less crimping type alluminium lugs conforming to IS

suitable for cable of following size evenly crimped with high

77 pressure to cl & connected to switch gear terminals with 12.00 Nos 17.17

brass /cadmium plated nut bolts in an approved manner.(b)

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

cable multistrand Aluminium conductor for 1.1 KV. to be

78 laid on wall with necessary clamps or in existing trench / 10.00 Nos 17.17

pipe of following size of cables (C) 16/25 Sq.mm.

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE, BHAVNAGAR CITY-

1 Dist- BHAVNAGAR.

No. Description Quantity Unit Rate Total Amount

No. Description Quantity Unit Rate Total Amount

Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire

of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multistrand copper wires, in following

type of pipe to be erected concealed in/ on surface on

wall/ceiling complete with 6A Modular type switch / bell

push & accessories and earth continuity of following type,

erected on PVC / Metallic box, single mounting base frame

covered with textured/metallic front plate modules erected

79 on / in wall / ceiling as per pipe erected, with necessary 50.00 Ea. 449.45

Lamp holder/ceiling rose / H.D.Connector as

directed.covered with textured/metallic front plate modules

erected on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose / H.D.Connector as

directed. (a) with medium class Rigid PVC pipe and

accessories. Cat. III

Point wiring for secondary light point with 2-1.5 sq.mm &

earthwire of 1.5 sq.mm (green) both are of ISI marked

KV grade FRLS PVC insulated multistrand copper wires, in

following type of pipe to be erected concealed in / flushed

on wall/ceiling, complete with earth continuity and

necessary connection with primary light with moduler

80 accessories erected on Metal / PVC box covered with 3 mm 25.00 Ea. 303.00

thick PC(Polycarbonet) / Acrylic sheet for open / concealed

wiring.with necessary Lamp holder / ceiling rose /

H.D.Connector as directed. (a) with medium class Rigid PVC

pipe and accessories erected conceealed in wall /ceiling

Point wiring for two way controlled light point with 2-1.5

sq.mm & earthwire of 1.5 sq.mm (green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multistrand

copper wires, in following type of pipe to be erected

concealed in / flushed on wall/ceiling, complete with earth

continuity and necessary connection with primary light with

81 moduler accessories erected on Metal / PVC box covered 8.00 Ea. 560.55

with 3 mm thick PC(Polycarbonet) / Acrylic sheet for open

/ concealed wiring.with necessary Lamp holder / ceiling

rose / H.D.Connector as directed. (a) with medium class

Rigid PVC pipe and accessories erected conceealed in wall

/ceiling complete

Point wiring for Looped Plug with 6A Modular type switch &

5 pin socket erected on PVC / Metallic box, single mounting

82 base frame covered with textured / metallic front plate 15.00 PT. 241.39

modules erected on / in wall / ceiling with following type

accssories. Cat. III

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE, BHAVNAGAR CITY-

1 Dist- BHAVNAGAR.

No. Description Quantity Unit Rate Total Amount

No. Description Quantity Unit Rate Total Amount

Point wiring for FAN with 2-1.5 sq.mm & earthwire of

sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS

PVC insulated multistrand copper wires, in following type of

pipe to be erected concealed in / flushed on wall/celing

complete with 6A Modular type switch and hum free EME

four or more step type electronic fan regulator with

separately mounted and accessories with earth continuity

of following type erected on PVC / Metallic box, single

mounting base frame covered with textured/metallic front

plate modules erected on / in wall / ceiling as per pipe

erected.with necessary ceiling rose / H.D.Connector as

directed. (a) with medium class Rigid PVC pipe and

accessories. Cat. III

Providing & erecting Switch board for Computer or electric

apparatus consisting of following items in single board

erected on PVC / Metal board with 3 mm thick PC

(Polycarbonet) / Acrylic sheet erected as directed 1 no.

6A/16A universal plug-switch combined. 1 no. 6A/16A

universal plug-switch combined. 4 nos. 6A Switch. 4 nos. 6A

5 pin Plug. [B] For Modular Type Accessories. Cat. III

Point wiring for Individual Plug with & earthwire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multistrand copper wires, in existing pipe

duly erected complete with Modular type switch & 5 pin

Plug erected on PVC / Metallic box covered with

appropriate front plate modules erected on / in wall /

ceiling as per pipe erected with following type of

accessories. [I] For 6A Plug with 2-1.5 sq.mm Cu. Wire. (a)

with medium class Rigid PVC pipe and accessories. Cat. III

[II] For 16A Plug with 2-2.5 sq.mm Cu. Wire. (a) with

medium class Rigid PVC pipe and accessories. Cat. III

[III] For 16A Plug with 2-4 sq.mm Cu. Wire. (a) with medium

class Rigid PVC pipe and accessories. Cat. III

Providing following type of Modular Type Accessories

mounted with pvc / metallic box, single mounting base

frame covered with textured / metallic front plate , modules

erected with necessary connection. As desired by Engineer

Incharge. (3) Two Pin/RJ-11 Telephone Socket. [A] For One

89 (8) Modem Jack for Computer Open RJ-45 15.00 Ea. 181.80

90 (4) TV Co-axial Socket outlet. Cat.III 4.00 Ea. 151.50

91 (7) Blank Plate Single Cat -III 30.00 Nos 24.24

92 (19) Modular Indicating Call Bell Cat -III 10.00 Nos 151.50

93 (20) Modular Buzzer 2.00 Nos 149.48

(14) 6A/ 10A/ 16A/ 20A/ 25A/ 32A Double Pole Modular

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE, BHAVNAGAR CITY-

1 Dist- BHAVNAGAR.

No. Description Quantity Unit Rate Total Amount

No. Description Quantity Unit Rate Total Amount

Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to

be erected concealed in /flushed with wall/ceiling, with

95 sq. mm copper conductor FRLS PVC insulated stranded wire 380.00 mtr. 80.80

of green colour for earth continuity of following size. (a)

with medium class Rigid PVC pipe and accessories. (a)

wire 1.5 sq. mm

Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in existing pipe erected

with 2.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of

following size. (a) with medium class Rigid PVC pipe and

accessories. (a) 2 wire 4 sq. mm

Providing and erecting ISI mark Medium class RIGID PVC

PIPES of following size complete to be erected on/in wall or

ceiling erected with necessary PVC fittings & Junction boxes

fixed with adhesive solution & Clamps with following dia of

pipes, in approved manner as directed. (a) 20 mm

Providing and erecting ISI mark Medium class RIGID PVC

PIPES of following size complete to be erected on/in wall or

ceiling erected with necessary PVC fittings & Junction boxes

fixed with adhesive solution & Clamps with following dia of

pipes, in approved manner as directed. (b) 25 mm

Providing and erecting ISI mark Medium class RIGID PVC

PIPES of following size complete to be erected on/in wall or

ceiling erected with necessary PVC fittings & Junction boxes

fixed with adhesive solution & Clamps with following dia of

pipes, in approved manner as directed. (b) 32 mm

Providing & erecting PVC Corrugated Flexible Conduit with

required nos. of coupling, PVC bushes, Check-nuts etc.

complete of following sizes. (1) 20 mm

Supplying & erecting UPVC Mini trunking (PVC Casing-n-

Capping) having double-locking arrangement with grooves,

trunking of size not below 12.5 mm in height as per IS with

accessories of PVC/Resin polypropylene not below 1.8 mm

thick duly sealed in joint & erected on wall / ceiling of

following size . (2) 25 mm

Supplying and laying UPVC cable trunking system

comprising unplasticised polyvinyl, chloride rigid material

with ignition free and flame proof confirming BS with

103 necessary end caps Internal and external bend, flat bends, 60.00 mtr 222.20

coupler, tee etc..All necessary accessories and measuring of

following sizes (3) 50 mm x 50 mm trunking

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE, BHAVNAGAR CITY-

1 Dist- BHAVNAGAR.

No. Description Quantity Unit Rate Total Amount

No. Description Quantity Unit Rate Total Amount

Providing & Erecting approved make following size of TV Co-

axial flexible cable comprising inner conductor of solid bare

copper insulated with Foam PE & Secondary conductor

made of poly - Aluminium film bonded Al. Braids @ suitable

coverage overall sheathed with black PVC insulation. (b)

Supplying & erecting approved make Telephone Cable

electrolytic copper conductor PE insulation twisted in two

pairs, & wrapped with FRLS PVC tape & sheathed with

FRLS PVC or HFFR outer Jacket suitable for telephone wiring

& confirming to C-DOT erected in existing pipe. of following

size of conductors & nos.of pairs. With necessary

connections. [A] Conductor Size 0.5 mm (a) Unarmoured

Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA polyester powder coated

and high U.V. & corrosion resistance with diffuser 120 to

300 V,Power Factor more than 0.9, THD < 10 %, CCT 3000 K

to 6500K, Uniformity ratio >0.7,

Luminaire efficacy> 85 lumens/watt , LED driver efficiency

> 85 % (A) Tube Light with integral/ non-integral driver (d)

20 Watts, Surge - 4KV,IP-20, 4 feet Cat-lll.

Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA polyester powder coated

and high U.V. & corrosion resistance with diffuser 120 to

300 V,Power Factor more than 0.9, THD < 10 %, CCT 3000 K

107 to 6500K, Uniformity ratio >0.7, 60.00 Ea. 656.50

Luminaire efficacy> 85 lumens/watt , LED driver efficiency

> 85 % © Square/ Circular Surface/Recessed Mounted

Downlight with provision for spring loaded mounting clips

complete. (b) 12/13 watts, Surge-4 KV Cat-lll

Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA polyester powder coated

and high U.V. & corrosion resistance with diffuser 120 to

300 V,Power Factor more than 0.9, THD < 10 %, CCT 3000 K

to 6500K, Uniformity ratio >0.7, Luminaire efficacy>

lumens/watt , LED driver efficiency > 85 % © Square/

Circular Surface/Recessed Mounted Downlight with

provision for spring loaded mounting clips complete. (b)

watts, Surge-4 KV Cat-lll

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE, BHAVNAGAR CITY-

1 Dist- BHAVNAGAR.

No. Description Quantity Unit Rate Total Amount

No. Description Quantity Unit Rate Total Amount

Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA polyester powder coated

and high U.V. & corrosion resistance with diffuser 120 to

300 V,Power Factor more than 0.9, THD < 10 %, CCT 3000 K

109 to 6500K, Uniformity ratio >0.7, 8.00 Ea. 797.90

Luminaire efficacy> 85 lumens/watt , LED driver efficiency

> 85 % © Square/ Circular Surface/Recessed Mounted

Downlight with provision for spring loaded mounting clips

complete. © 18 watts, Surge-4 KV Cat-lll

Providing and erecting approved make decorative recess

mounting Down Lighter fittings with anodized Aluminium

reflector suitable for compact flourcent lamp with copper

110 ballast holder and necessary lead wire. 4.00 Ea. 858.50

(B)With One Lamp non retrofit 15/18/26 W C.F.L. Cat III

Providing & erecting Approved make Power Saving 50 Watt

Ceiling Fan with double ball bearing ISI mark with

Condenser 230 volt A.C. 50 Hz 1200 mm sweep complete

111 having 3blades with aluminium blades with , canopy & 30 25.00 nos. 2,121.00

cms. down rod erected with 24/ 0.2, 3 core flexible wire

with earthing.(Havells, Orient, Crompton, Anchor,

Supplying & erecting approved make low noise decorative

exhaust fan having size 200mm with 1350 RPM with square

frame ABS body with inbuilt lowers & square frame.

Supplying & erecting Approved make call bell indicator with

buzzing sound and Red light indicating lamp with Red light

button to attend the call suitable for 240 v 50 c/s supply to

Providing and erecting required size HOT deep Galvanised

iron strip for earthing of H.T. OCB / ACB/ Transformer, LT

pannel board, Motors etc. using copper clamp.

Providing and erecting Annealed bare copper wire 8 to

Providing and erecting HOT deep Galvanised iron strip wire

MISsecelaneous Removing all electrical material

/equipment form existing set up with proper safety majors

and also handover to client representive /PMC/ Architect

team as per Requirement

Re use the electrical material as per client's representative

118 /architect / Engineer in charge instruction 1.00 Job 8,080.00

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE, BHAVNAGAR CITY-

1 Dist- BHAVNAGAR.

No. Description Quantity Unit Rate Total Amount

No. Description Quantity Unit Rate Total Amount

Supplying labour for removing and filling all type civil

/electrical HVAC of debris including construction waste

119 materials and cleaning or any other type work for 8 hr per 12.00 2,121.00

day with all lead and lift comp. as directed /suggested by

Grimco Engineer in charge

Missecelaneous civil work like wall jury,cut out & opening to

pass piping tray ,wire ,pipes & drain pipes including with Per

refinishing & plastering the same to the original finish. Job

Providing & erecting water cooler having storage capacity

150 Ltr. & cooling capacity 150 Ltr.per hour @ an ambient

temp of 450 C. The outlet temp. of the water should drop by

150C within a hour, The water cooler should be comprising

of hermetically sealed compressor, fan motor, condensing

unit, water tank surrounded by evaporating, coil,

thermostats, relay etc.complete with necessary inlet & outlet

connection. The body of water cooler will be made from

Stainless Steel.

Supplying & erecting 5 stage single reverse osmosis water

purification system with M.S. powder coated frame, prefilter

housing with 'O' ring presediment filter GAC filter, carbon

filter suitable buster DC pump capacity 80 psi, mention with

40 Osg inline type post carbon filter auto low & high

pressure switches with following size of storage tank & LPH

capacity & erected as directed with one year comprehensive

maintenance guarantee. [C] 50 Ltr / Hr with 250 psi 2 nos

Supplying & erecting approved make LAN cable of following

123 size in existing pipe as per direction [C] CAT - 6 250.00 Rmt. 51.51

Providing & erecting main Distribution (MDF) indoor type,

124 back mounted frame as per DoT standard approved with 2.00 nos 1,119.08

krone strips (a) Suitable for 10 pair

Supplying and erecting of 43 " UHD LED display for CCTV

monitoring and checking (the scope include the stand and

other necessary accessories to complete the job

Supplying & erecting carbon dioxide (CO2) fire extinguisher

user of following capacity with necessary clamps made from

126 50 x 6 mm M.S. Flat with nut & bolts grouted in wall 6.00 No 6,591.26

[A] For 4.5 Kg Capacity

Amount with GST

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE, JESAR

Dist- BHAVNAGAR.

No. Description Quantity Unit Rate Total Amount

No. Description Quantity Unit Rate Total Amount

Removing dry or oil bound distemper by a washing and

scraping and sand papering the wall surface smooth

including necessary repairs to scratches complete.

Demolition of existing False Ceiling including stacking of

2 serviceable materilas and disposal of unserviceable 32.22 Smt 53.53

materials with all lead and lift.

Providing and applying two coats of Birla or Asian acrylic

lapy (putty) & two coats of primer of approved brand and

manufacture on new wall surface to give an even shade

including thoroughly brushing the surface free from mortar

dropping and other foreign matter and sand papered

smooth and Wall painting (three coats) with plastic

emulsion paint of approved brand and manufacture on

under coated wall surface to give and even shade including

throughly brushing the surface free from mortor droppings

and other foreign matter and sand paperd smooth on new

work to give an even shade for all height

Removing Exisitng AC & window grill as per instruction &

fixing existing grill with require hardware,adhesive material

4 & welding with proper finish as per architect /Grimco 1.00 Job 15,150.00

Engineer in charges instruction.

Providing and fixing roller blind fixed on window level on

wooden battern and curtain lift with cotton thin rope ,design

and colour as per instruction by Grimo Engineer in charge /

5 Architect with necessary hardware fitting ,material and 52.20 Smt 1,616.00

labour etc .complete as per instrction of Architect /Grimco

Engineer in charge.

Providing & applying synthetic enamel paint (and repair

grill as epr site situation -proper finishing ,levellng ,welding

,cleaning )of apprvoed brand to previosly painted steel work

6 with one coat of approved quality and brand paint make and 130.50 smt 262.60

of required shade ,including cleaning and scrapping the

surface with sand paper etc completed as directed .

cleaning office glass ,wall window ,table with required

material broom ,dust pan ,squeegee, sprey cleaner,mop as

per instruction by Architect /Grimco Engineer in charge.

Demolition of existing civil work ,interior ,ELV,MEP &

electrical work including stacking of serviceable materials

8 and disposal of unserviceable materials with all lead and lift 1.00 Job 18,180.00

as per instruction of architect /Grimco Engineer in charge.

Dismentaling tiled of stone floors laid in mortar including

9 stacking of serviceable materilas and disposal of 106.83 smt 49.18

unserviceable materials with all lead and lift.

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE, JESAR

Dist- BHAVNAGAR.

No. Description Quantity Unit Rate Total Amount

No. Description Quantity Unit Rate Total Amount

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse

sand) on new surface or fixing on existing flooring by

adhesive material including dismentaling of existing flooring

and jointed with color cement slurry including finised with

flush pointing & cleaning the surface etc. complete for DARK

shade /light shade

Removing and scraping of old deteriorated plaster of any

thickness fromm wall / R.C.C member including stacking of

serviceable material and disposal of unserviceable from site

of work with all lead and lift

Providing & fixing handicape tractile tiles (shelf adhesive

)the tiles shall be fixed with suitable adhesive /scrue

material with all required additional hardware support or

tiles laid on 20 bed of 20 mm (avg) base of cement mortar

1:6 (1 cement :6 Coarse sand ) on new surface /old surface

12 with 4 mm epoxy and joined with colour cement slurry 9.00 smt 6,464.00

including finishing with flush pointing & cleaning the

surface etc rate shall be including transportation ,all floor

hardware ,adhesive material etc as per architect /Grimco

Engineer in charge.

Providing ,removing ,existing door closer and fixing door

closer and blue space solid standoffs heavy -duty

13 commercial grade -304 stainless steel push pull door handle 4.00 Nos 2,777.50

rate shall be including fitting charge.as per architect /grimco

engineer in charge.

Door laminate change.to be removed & rifixing providing &

fixing both side 1 1mm laminate & existing removing

laminate door or washable type material of good quality

with appropriate adhesive of approved quality like fevicol or

its equivalent brands with smooth finishing and in line level

with regular edges as per requirment and site situation

including cutting and necessary cut outs of glass and cut out

finish with plywood with selected laminate & door if any

required etc complete in all respects all rates are inclusive of

hardware like nails , screws , abro taps ,adhesive etc

Demolition and disposal of unserviceable materials with all

lead and lift.(i) Lime concrete.

Providing and laying cement concrete 1:2:4 (1- Cement : 2-

Coarse sand : 4- graded stone aggregates 20 mm nominal

size) and curing complete excluding cost of formwork in (A)

Foundation and Plinth

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE, JESAR

Dist- BHAVNAGAR.

No. Description Quantity Unit Rate Total Amount

No. Description Quantity Unit Rate Total Amount

Provdg. & Fixing low/full height Storage rack ready to

assemble type, self-standing, over hanging or partition

mounted storage system having size 900mm length, 750mm

height and 450 mm. depth. Carcass and shelves: Made from

18mm flat laminated panels of 16mm BWR calibrated ply

covered with 0.8 mm High pressure laminate on both side

glued with PUR glue, 0.8mm thick PVC edge bands glued

with hot melt Glues. The shelves are connected with body

17 through adjustable shelf supports Back Panel: 3mm high 4.41 Smt 8,585.00

pressure compact sheet both side laminated hold in slit

formed in the body. Shutters: Made from Flat laminated

Plywood with 1 mm High pressure laminate on both side

glued with PUR glue,with 2 mm thick PVC edge bands.

Shutters should be of sliding mechanisum as per selection.

etc. complete as directed by engineer in-charg

ASCENT FULL HEIGHT PARTITION @ 3000HT

Full Height Partition @ 2130HT - Double Glass finish and

Horizontal Vanishing Blinds- Tile based System -Partition

will have double skin provision for 6 mm thick plain

toughened glass from out side and 6mm thick plain

toughened glass from inside. Structure material and All

Exposed will be Aluminum Anodized finish and connecting

members used for joining False ceiling to Hard Ceiling are

CRCA powder coated. Additional Blinds are provided in

between the glasses to provide privacy in the partition.

Blinds are operated by the Knobs which will be fitted to the

partition from the internal side ., Double Glass Finish upto

@2130ht (from floor level to door Ht ).

Providing and fixing hydraulic door closer of approved size

19 and made such equivalent as directed. all lift, level and leads. 3.00 Nos. 858.50

(work for all the floors)

Providing & Fixing 12 mm thick Tuffan Glass Door with glass

to glass hinges Fixed on Heavy Duty Floor Spring and towel

bar handle and necessary accessories with jointing with

silicon etc. Complete.

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE, JESAR

Dist- BHAVNAGAR.

No. Description Quantity Unit Rate Total Amount

No. Description Quantity Unit Rate Total Amount

Gypsum False Ceiling-Providing and fixing gypsum board

false ceiling using standerd company section (gyp frame)

consists at G.I perimeter channels of size 0.55 thick having

one flange of 20 mm and another flange of 30 mm and web

of 27 mm along with perimeter of ceiling, screws fixed to

brick work/ concrete/ partition with help of nylon sleeves

and screws at610 mm centre. The suspending G.I.

intermediate channels of size 45 mm (0.9 mm thick with

flangs at 15mm each from the soffit at 1220 mm centrewith

ceiling angles of width 25mm x 10mm x 0.5 mm thick fixed

to soffit withG. I cleat and steel expansion fastners ceiling

21 section of .55 thick having kurled web 51.5 mm and 2 flangs 117.41 Smt 1,212.00

at 26 mm each with lip at 10.5 mm are fixed to intermediate

channel with help of connecting clips and in direction

perpendicular to the intermediate channel at 450mm centre

to centre including 12.5 mm tapered edge Gyp board

conforming to IS 2095 – 1982 is then screw fixed to ceiling

section with 25mm dry wall screws of approved quality and

make at 230mm centre, screw fixing is donemechanically

with drilling machine with suitable attachment. Finally

tapered edges at the cupboard are to be joint and finished so

as to have a flush look which includes filling and finishing

Providing andcompound,

fixing 3 mm paper

PVCetc. complete.

as signage to be

display of health signs/information of required size having

retro reflective letters/design as per requirement, fixing the

22 same through approved adhesive etc. complete work shall e 6.00 Each 606.00

carried out as per instruction of Engineer-in-charge

(Approved make PVC foamed sheet only) (45 x 15 cms.)

Supplying and fixing Board &Sinages with 3mm thick

exterior grade ACP of Aludecore,Alstrong or Eurobond

brand with Vinyl letters [Non Reflective] including propore

23 M.S.Structure of 45x45mm Hollow square box section of 1.50 Smt 2,727.00

20guage with one coat of Anticorrossive paint and two coat

of oil paint with required anchoring fastners etc.complete as

per directed.[A] Main board

MASS STORAGE SYSTEM (COMPACTOR)

Providing and installation of Compactors , as per layout

plan, with knock down construction mechanical driven

mechanism made of 1mm thick CRCA steel confirming to IS:

513GR.D, Under carriage shall have a welded frame made of

HR Sheet 3.15mm thick. The steel parts shall be pretreated

and then epoxy powder coated with approved colour with a

dry film thickness of minimum 40 microns thickness.

(A) Double Faced Mobile Unit

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE, JESAR

Dist- BHAVNAGAR.

No. Description Quantity Unit Rate Total Amount

No. Description Quantity Unit Rate Total Amount

Providing and erecting Inverter based approved make split

air-conditioning unit consisting of condensing unit with

variable speed fan motor, inverter type hermetically sealed

rotary compressor with accessories etc. duly connected

separately erected evaporating unit and blower motor with

its accessories by means of extra supplied proper insulated

copper tubing,drain PVC pipes suitable for ( cost includes

Eco Friendly green gas charging and 15A plug top & Remote

Control & MS Stand) with necessary core cutting.(B) for

ton capacity - Premium Cat.

Providing and erecting approved make Cassette type split

air-conditioning unit consisting of condensing unit with fan

motor, hermetically sealed scroll/rotary compressor with

accessories etc. duly connected separately erected

26 evaporating unit and blower motor with its accessories by 2.00 NOS 60,847.45

Eco friendly Green gas charging & Internal copper wiring &

Remote control ( 3 star and above of current year) with

necessary core cutting. (C) for 2 ton capacity

Supplying and erecting insulated pair of soft copper tubing

open or concealed including power and control

cable,necessary PVC drain pipes for Split AC machine up to

Miniature circuit breaker single pole 6A to 32A suitable to

28 operate on 240 V A.C. system and having breaking capacity 10.00 Ea. 131.30

10 KA to be erected in existing box. confirming to IS

8828/1996 with ISI Mark. Cat.III

Providing & erecting 240 V MCB double pole switch for

motor & inductive load (C Curve) having 10 KA breaking

capacity & confirms to IS : 8828 in existing box having

following capacity (A) 6 to 32 Amp. Cat -III

Providing & erecting415 V MCB double pole switch for

motor & inductive load (C Curve) having 10 KA breaking

capacity & confirms to IS : 8828 in existing box having

following capacity (A) 40 Amp. Cat -III

Providing and erecting Sheet Steel powder coated Vertical

MCB distribution board (VTPN) - flush / surface mounted

double door (IP54) fitted with copper insulated busbar,

isolated neutral bar, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3, suitable for 250 AMP TPN

31 MCCB + RCCB as incomer and three phase outgoing as per 1.00 nos 3,437.03

following .(The DBs should be used of same company of

MCB to be used) (B) Three phase incoming and single phase

horizontal type ongoing per phase isolation type (PPI)

(b)sheet steel double door (ii) 6 way

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE, JESAR

Dist- BHAVNAGAR.

No. Description Quantity Unit Rate Total Amount

No. Description Quantity Unit Rate Total Amount

providing & erecting Approved make ELCBs / RCCBs

conforming to IS: 12640 and having sensitivity of 30 mA and

Short Circuit withstand capacity of 6 KA and suitable for

operation on single phase 240 V. having characteristic of

quick action & tripping with all advance feature & do not

incorporate any electronic component.for following Max.

rating erected as directed. (ii) 40Amps. DP cat -iii

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

cable multistrand Aluminium conductor for 1.1 KV. to be

33 laid on wall with necessary clamps or in existing trench / 160.00 mtr 176.75

pipe of following size of cables (A) 4 core 16 Sq. mm

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

cable multistrand Aluminium conductor for 1.1 KV. to be

34 laid on wall with necessary clamps or in existing trench / 78.00 mtr 161.60

pipe of following size of cables (A) 4 core 16 Sq. mm

solder less crimping type alluminium lugs conforming to IS

suitable for cable of following size evenly crimped with high

35 pressure to cl & connected to switch gear terminals with 8.00 Nos 14.14

brass /cadmium plated nut bolts in an approved manner.(b)

solder less crimping type alluminium lugs conforming to IS

suitable for cable of following size evenly crimped with high

36 pressure to cl & connected to switch gear terminals with 8.00 Nos 17.17

brass /cadmium plated nut bolts in an approved manner.(b)

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

cable multistrand Aluminium conductor for 1.1 KV. to be

37 laid on wall with necessary clamps or in existing trench / 6.00 Nos 17.17

pipe of following size of cables (C) 16/25 Sq.mm.

Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire

of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multistrand copper wires, in following

type of pipe to be erected concealed in/ on surface on

wall/ceiling complete with 6A Modular type switch / bell

push & accessories and earth continuity of following type,

erected on PVC / Metallic box, single mounting base frame

covered with textured/metallic front plate modules erected

on / in wall / ceiling as per pipe erected, with necessary

Lamp holder/ceiling rose / H.D.Connector as

directed.covered with textured/metallic front plate modules

erected on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose / H.D.Connector as

directed. (a) with medium class Rigid PVC pipe and

accessories. Cat. III

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE, JESAR

Dist- BHAVNAGAR.

No. Description Quantity Unit Rate Total Amount

No. Description Quantity Unit Rate Total Amount

Point wiring for secondary light point with 2-1.5 sq.mm &

earthwire of 1.5 sq.mm (green) both are of ISI marked

KV grade FRLS PVC insulated multistrand copper wires, in

following type of pipe to be erected concealed in / flushed

on wall/ceiling, complete with earth continuity and

necessary connection with primary light with moduler

39 accessories erected on Metal / PVC box covered with 3 mm 18.00 Ea. 303.00

thick PC(Polycarbonet) / Acrylic sheet for open / concealed

wiring.with necessary Lamp holder / ceiling rose /

H.D.Connector as directed. (a) with medium class Rigid PVC

pipe and accessories erected conceealed in wall /ceiling

Point wiring for two way controlled light point with 2-1.5

sq.mm & earthwire of 1.5 sq.mm (green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multistrand

copper wires, in following type of pipe to be erected

concealed in / flushed on wall/ceiling, complete with earth

continuity and necessary connection with primary light with

40 moduler accessories erected on Metal / PVC box covered 4.00 Ea. 560.55

with 3 mm thick PC(Polycarbonet) / Acrylic sheet for open

/ concealed wiring.with necessary Lamp holder / ceiling

rose / H.D.Connector as directed. (a) with medium class

Rigid PVC pipe and accessories erected conceealed in wall

/ceiling complete

Point wiring for Looped Plug with 6A Modular type switch &

5 pin socket erected on PVC / Metallic box, single mounting

41 base frame covered with textured / metallic front plate 10.00 PT. 241.39

modules erected on / in wall / ceiling with following type

accssories. Cat. III

Point wiring for FAN with 2-1.5 sq.mm & earthwire of

sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS

PVC insulated multistrand copper wires, in following type of

pipe to be erected concealed in / flushed on wall/celing

complete with 6A Modular type switch and hum free EME

four or more step type electronic fan regulator with

separately mounted and accessories with earth continuity

of following type erected on PVC / Metallic box, single

mounting base frame covered with textured/metallic front

plate modules erected on / in wall / ceiling as per pipe

erected.with necessary ceiling rose / H.D.Connector as

directed. (a) with medium class Rigid PVC pipe and

accessories. Cat. III

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE, JESAR

Dist- BHAVNAGAR.

No. Description Quantity Unit Rate Total Amount

No. Description Quantity Unit Rate Total Amount

Providing & erecting Switch board for Computer or electric

apparatus consisting of following items in single board

erected on PVC / Metal board with 3 mm thick PC

(Polycarbonet) / Acrylic sheet erected as directed 1 no.

6A/16A universal plug-switch combined. 1 no. 6A/16A

universal plug-switch combined. 4 nos. 6A Switch. 4 nos. 6A

5 pin Plug. [B] For Modular Type Accessories. Cat. III

Point wiring for Individual Plug with & earthwire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multistrand copper wires, in existing pipe

duly erected complete with Modular type switch & 5 pin

Plug erected on PVC / Metallic box covered with

appropriate front plate modules erected on / in wall /

ceiling as per pipe erected with following type of

accessories. [I] For 6A Plug with 2-1.5 sq.mm Cu. Wire. (a)

with medium class Rigid PVC pipe and accessories. Cat. III

[II] For 16A Plug with 2-2.5 sq.mm Cu. Wire. (a) with

medium class Rigid PVC pipe and accessories. Cat. III

[III] For 16A Plug with 2-4 sq.mm Cu. Wire. (a) with medium

class Rigid PVC pipe and accessories. Cat. III

Providing following type of Modular Type Accessories

mounted with pvc / metallic box, single mounting base

frame covered with textured / metallic front plate , modules

erected with necessary connection. As desired by Engineer

Incharge. (3) Two Pin/RJ-11 Telephone Socket. [A] For One

48 (8) Modem Jack for Computer Open RJ-45 12.00 Ea. 181.80

49 (4) TV Co-axial Socket outlet. Cat.III 2.00 Ea. 151.50

50 (7) Blank Plate Single Cat -III 25.00 Nos 24.24

51 (19) Modular Indicating Call Bell Cat -III 10.00 Nos 151.50

52 (20) Modular Buzzer 1.00 Nos 149.48

(14) 6A/ 10A/ 16A/ 20A/ 25A/ 32A Double Pole Modular

Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to

be erected concealed in /flushed with wall/ceiling, with

54 sq. mm copper conductor FRLS PVC insulated stranded wire 315.00 mtr. 80.80

of green colour for earth continuity of following size. (a)

with medium class Rigid PVC pipe and accessories. (a)

wire 1.5 sq. mm

Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in existing pipe erected

with 2.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of

following size. (a) with medium class Rigid PVC pipe and

accessories. (a) 2 wire 4 sq. mm

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE, JESAR

Dist- BHAVNAGAR.

No. Description Quantity Unit Rate Total Amount

No. Description Quantity Unit Rate Total Amount

Providing and erecting ISI mark Medium class RIGID PVC

PIPES of following size complete to be erected on/in wall or

ceiling erected with necessary PVC fittings & Junction boxes

fixed with adhesive solution & Clamps with following dia of

pipes, in approved manner as directed. (a) 20 mm

Providing and erecting ISI mark Medium class RIGID PVC

PIPES of following size complete to be erected on/in wall or

ceiling erected with necessary PVC fittings & Junction boxes

fixed with adhesive solution & Clamps with following dia of

pipes, in approved manner as directed. (b) 25 mm

Providing and erecting ISI mark Medium class RIGID PVC

PIPES of following size complete to be erected on/in wall or

ceiling erected with necessary PVC fittings & Junction boxes

fixed with adhesive solution & Clamps with following dia of

pipes, in approved manner as directed. (b) 32 mm

Providing & erecting PVC Corrugated Flexible Conduit with

60 required nos. of coupling, PVC bushes, Check-nuts etc. 85.00 mtr 16.16

complete of following sizes. (1) 20 mm

Supplying & erecting UPVC Mini trunking (PVC Casing-n-

Capping) having double-locking arrangement with grooves,

trunking of size not below 12.5 mm in height as per IS with

accessories of PVC/Resin polypropylene not below 1.8 mm

thick duly sealed in joint & erected on wall / ceiling of

following size . (2) 25 mm

Supplying and laying UPVC cable trunking system

comprising unplasticised polyvinyl, chloride rigid material

with ignition free and flame proof confirming BS with

62 necessary end caps Internal and external bend, flat bends, 58.00 mtr 222.20

coupler, tee etc..All necessary accessories and measuring of

following sizes (3) 50 mm x 50 mm trunking

Providing & Erecting approved make following size of TV Co-

axial flexible cable comprising inner conductor of solid bare

copper insulated with Foam PE & Secondary conductor

made of poly - Aluminium film bonded Al. Braids @ suitable

coverage overall sheathed with black PVC insulation. (b)

Supplying & erecting approved make Telephone Cable

electrolytic copper conductor PE insulation twisted in two

pairs, & wrapped with FRLS PVC tape & sheathed with

FRLS PVC or HFFR outer Jacket suitable for telephone wiring

& confirming to C-DOT erected in existing pipe. of following

size of conductors & nos.of pairs. With necessary

connections. [A] Conductor Size 0.5 mm (a) Unarmoured

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE, JESAR

Dist- BHAVNAGAR.

No. Description Quantity Unit Rate Total Amount

No. Description Quantity Unit Rate Total Amount

Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA polyester powder coated

and high U.V. & corrosion resistance with diffuser 120 to

300 V,Power Factor more than 0.9, THD < 10 %, CCT 3000 K

to 6500K, Uniformity ratio >0.7,

Luminaire efficacy> 85 lumens/watt , LED driver efficiency

> 85 % (A) Tube Light with integral/ non-integral driver (d)

20 Watts, Surge - 4KV,IP-20, 4 feet Cat-lll.

Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA polyester powder coated

and high U.V. & corrosion resistance with diffuser 120 to

300 V,Power Factor more than 0.9, THD < 10 %, CCT 3000 K

66 to 6500K, Uniformity ratio >0.7, 35.00 Ea. 656.50

Luminaire efficacy> 85 lumens/watt , LED driver efficiency

> 85 % © Square/ Circular Surface/Recessed Mounted

Downlight with provision for spring loaded mounting clips

complete. (b) 12/13 watts, Surge-4 KV Cat-lll

Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA polyester powder coated

and high U.V. & corrosion resistance with diffuser 120 to

300 V,Power Factor more than 0.9, THD < 10 %, CCT 3000 K

to 6500K, Uniformity ratio >0.7, Luminaire efficacy>

lumens/watt , LED driver efficiency > 85 % © Square/

Circular Surface/Recessed Mounted Downlight with

provision for spring loaded mounting clips complete. (b)

watts, Surge-4 KV Cat-lll

Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA polyester powder coated

and high U.V. & corrosion resistance with diffuser 120 to

300 V,Power Factor more than 0.9, THD < 10 %, CCT 3000 K

68 to 6500K, Uniformity ratio >0.7, 4.00 Ea. 797.90

Luminaire efficacy> 85 lumens/watt , LED driver efficiency

> 85 % © Square/ Circular Surface/Recessed Mounted

Downlight with provision for spring loaded mounting clips

complete. © 18 watts, Surge-4 KV Cat-lll

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE, JESAR

Dist- BHAVNAGAR.

No. Description Quantity Unit Rate Total Amount

No. Description Quantity Unit Rate Total Amount

Providing and erecting approved make decorative recess

mounting Down Lighter fittings with anodized Aluminium

reflector suitable for compact flourcent lamp with copper

69 ballast holder and necessary lead wire. 2.00 Ea. 858.50

(B)With One Lamp non retrofit 15/18/26 W C.F.L. Cat III

Providing & erecting Approved make Power Saving 50 Watt

Ceiling Fan with double ball bearing ISI mark with

Condenser 230 volt A.C. 50 Hz 1200 mm sweep complete

70 having 3blades with aluminium blades with , canopy & 30 12.00 nos. 2,121.00

cms. down rod erected with 24/ 0.2, 3 core flexible wire

with earthing.(Havells, Orient, Crompton, Anchor,

Supplying & erecting approved make low noise decorative

exhaust fan having size 200mm with 1350 RPM with square

frame ABS body with inbuilt lowers & square frame.

Supplying & erecting Approved make call bell indicator with

buzzing sound and Red light indicating lamp with Red light

button to attend the call suitable for 240 v 50 c/s supply to

Providing and erecting required size HOT deep Galvanised

iron strip for earthing of H.T. OCB / ACB/ Transformer, LT

pannel board, Motors etc. using copper clamp.

Providing and erecting Annealed bare copper wire 8 to

Providing and erecting HOT deep Galvanised iron strip wire

MISsecelaneous Removing all electrical material

/equipment form existing set up with proper safety majors

and also handover to client representive /PMC/ Architect

team as per Requirement

Re use the electrical material as per client's representative

77 /architect / Engineer in charge instruction 1.00 Job 8,080.00

Supplying labour for removing and filling all type civil

/electrical HVAC of debris including construction waste

78 materials and cleaning or any other type work for 8 hr per 15.00 2,121.00

day with all lead and lift comp. as directed /suggested by

Grimco Engineer in charge

Missecelaneous civil work like wall jury,cut out & opening to

pass piping tray ,wire ,pipes & drain pipes including with Per

refinishing & plastering the same to the original finish. Job

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE, JESAR

Dist- BHAVNAGAR.

No. Description Quantity Unit Rate Total Amount

No. Description Quantity Unit Rate Total Amount

Providing & erecting water cooler having storage capacity

150 Ltr. & cooling capacity 150 Ltr.per hour @ an ambient

temp of 450 C. The outlet temp. of the water should drop by

150C within a hour, The water cooler should be comprising

of hermetically sealed compressor, fan motor, condensing

unit, water tank surrounded by evaporating, coil,

thermostats, relay etc.complete with necessary inlet & outlet

connection. The body of water cooler will be made from

Stainless Steel.

Supplying & erecting 5 stage single reverse osmosis water

purification system with M.S. powder coated frame, prefilter

housing with 'O' ring presediment filter GAC filter, carbon

filter suitable buster DC pump capacity 80 psi, mention with

40 Osg inline type post carbon filter auto low & high

pressure switches with following size of storage tank & LPH

capacity & erected as directed with one year comprehensive

maintenance guarantee. [C] 50 Ltr / Hr with 250 psi 2 nos

Supplying & erecting approved make LAN cable of following

82 size in existing pipe as per direction [C] CAT - 6 300.00 Rmt. 51.51

Providing & erecting main Distribution (MDF) indoor type,

83 back mounted frame as per DoT standard approved with 2.00 nos 1,119.08

krone strips (a) Suitable for 10 pair

Supplying and erecting of 43 " UHD LED display for CCTV

monitoring and checking (the scope include the stand and

other necessary accessories to complete the job

Supplying & erecting carbon dioxide (CO2) fire extinguisher

user of following capacity with necessary clamps made from

85 50 x 6 mm M.S. Flat with nut & bolts grouted in wall 5.00 No 6,591.26

[A] For 4.5 Kg Capacity

Amount with GST

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE, LILIYA Dist-

No. Description Quantity Unit Rate Total Amount

No. Description Quantity Unit Rate Total Amount

Removing dry or oil bound distemper by a washing and

scraping and sand papering the wall surface smooth

including necessary repairs to scratches complete.

Demolition of existing False Ceiling including stacking of

2 serviceable materilas and disposal of unserviceable 89.95 Smt 53.53

materials with all lead and lift.

Providing and applying two coats of Birla or Asian acrylic

lapy (putty) & two coats of primer of approved brand and

manufacture on new wall surface to give an even shade

including thoroughly brushing the surface free from mortar

dropping and other foreign matter and sand papered

smooth and Wall painting (three coats) with plastic

3 emulsion paint of approved brand and manufacture on 301.30 Smt 252.50

under coated wall surface to give and even shade including

throughly brushing the surface free from mortor droppings

and other foreign matter and sand paperd smooth on new

work to give an even shade for all height

Providing and fixing standared extruded of domal

alluminium section of size 50 mm x 25 mm x 1.2mm (Jindal

4 or equivalent) with colour anodized 60 micron alluminium 0.72 Smt 2,140.19

frame for ventilation with 5 mm thick frosted glass as

details etc complete for Ventilation

Providing and laying Ceramic tiles (600mm* 600 mm) 8-10

mm thick in flooring treads of steps and landing laid on a

5 bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse 9.26 Smt 981.72

sand) finishing with flush pointing in white cement.

Providing and laying coloured glazed tiles of the size

mm x 450 mm x 8 mm in skirting, risers of steps and dedo

6 on 10 mm. thick cement plaster 1:3 (1 cement : 3 coarse 37.97 Smt 1,111.00

sand) & jointed with white cement slurry.

Providing and laying 18 mm thick polished granite stone

machine cut in single piece (Max. available) in sill and jambs

of door , window, ventilation & lift wall cladding, staircase

flooring landing, risers & treads, skirting laid over 10 mm

thick cement mortar 1 : 3 (1 cement : 3 coarse sand) and

7 jointed with grey cement slurry with matching pigment incl. 21.42 Smt 2,716.90

rubbing and polishing,half rounding edge and incl. fixing of

hilty fastener at every 1/3 span of sill as required size etc.

complete colour and shed as approved by architect engineer

Removing Exisitng AC & window grill as per instruction &

fixing existing grill with require hardware,adhesive material

8 & welding with proper finish as per architect /Grimco 1.00 Job 15,150.00

Engineer in charges instruction.

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE, LILIYA Dist-

No. Description Quantity Unit Rate Total Amount

No. Description Quantity Unit Rate Total Amount

Providing and fixing roller blind fixed on window level on

wooden battern and curtain lift with cotton thin rope ,design

and colour as per instruction by Grimo Engineer in charge /

9 Architect with necessary hardware fitting ,material and 13.00 Smt 1,616.00

labour etc .complete as per instrction of Architect /Grimco

Engineer in charge.

Providing & applying synthetic enamel paint (and repair

grill as epr site situation -proper finishing ,levellng ,welding

,cleaning )of apprvoed brand to previosly painted steel work

10 with one coat of approved quality and brand paint make and 39.00 smt 262.60

of required shade ,including cleaning and scrapping the

surface with sand paper etc completed as directed .

cleaning office glass ,wall window ,table with required

material broom ,dust pan ,squeegee, sprey cleaner,mop as

per instruction by Architect /Grimco Engineer in charge.

Demolition of existing civil work ,interior ,ELV,MEP &

electrical work including stacking of serviceable materials

12 and disposal of unserviceable materials with all lead and lift 1.00 Job 18,180.00

as per instruction of architect /Grimco Engineer in charge.

Dismentaling tiled of stone floors laid in mortar including

13 stacking of serviceable materilas and disposal of 8.38 smt 49.18

unserviceable materials with all lead and lift.

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse

sand) on new surface or fixing on existing flooring by

adhesive material including dismentaling of existing flooring

and jointed with color cement slurry including finised with

flush pointing & cleaning the surface etc. complete for DARK

shade /light shade

Removing and scraping of old deteriorated plaster of any

thickness fromm wall / R.C.C member including stacking of

serviceable material and disposal of unserviceable from site

of work with all lead and lift

Providing & fixing handicape tractile tiles (shelf adhesive

)the tiles shall be fixed with suitable adhesive /scrue

material with all required additional hardware support or

tiles laid on 20 bed of 20 mm (avg) base of cement mortar

1:6 (1 cement :6 Coarse sand ) on new surface /old surface

16 with 4 mm epoxy and joined with colour cement slurry 9.90 smt 6,464.00

including finishing with flush pointing & cleaning the

surface etc rate shall be including transportation ,all floor

hardware ,adhesive material etc as per architect /Grimco

Engineer in charge.

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE, LILIYA Dist-

No. Description Quantity Unit Rate Total Amount

No. Description Quantity Unit Rate Total Amount

Providing ,removing ,existing door closer and fixing door

closer and blue space solid standoffs heavy -duty

17 commercial grade -304 stainless steel push pull door handle 2.00 Nos 2,777.50

rate shall be including fitting charge.as per architect

/grimco engineer in charge.

Door laminate change.to be removed & rifixing providing &

fixing both side 1 1mm laminate & existing removing

laminate door or washable type material of good quality

with appropriate adhesive of approved quality like fevicol or

its equivalent brands with smooth finishing and in line level

with regular edges as per requirment and site situation

including cutting and necessary cut outs of glass and cut out

finish with plywood with selected laminate & door if any

required etc complete in all respects all rates are inclusive

of hardware like nails , screws , abro taps ,adhesive etc

Demolition and disposal of unserviceable materials with all

lead and lift.(i) Lime concrete.

Providing and laying cement concrete 1:2:4 (1- Cement : 2-

Coarse sand : 4- graded stone aggregates 20 mm nominal

size) and curing complete excluding cost of formwork in (A)

Foundation and Plinth

Provdg. & Fixing low/full height Storage rack ready to

assemble type, self-standing, over hanging or partition

mounted storage system having size 900mm length, 750mm

height and 450 mm. depth. Carcass and shelves: Made from

18mm flat laminated panels of 16mm BWR calibrated ply

covered with 0.8 mm High pressure laminate on both side

glued with PUR glue, 0.8mm thick PVC edge bands glued

with hot melt Glues. The shelves are connected with body

21 through adjustable shelf supports Back Panel: 3mm high 11.75 Smt 8,585.00

pressure compact sheet both side laminated hold in slit

formed in the body. Shutters: Made from Flat laminated

Plywood with 1 mm High pressure laminate on both side

glued with PUR glue,with 2 mm thick PVC edge bands.

Shutters should be of sliding mechanisum as per selection.

etc. complete as directed by engineer in-charg

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE, LILIYA Dist-

No. Description Quantity Unit Rate Total Amount

No. Description Quantity Unit Rate Total Amount

WORKTOP to be made of 25 mm thick Prelaminated particle

board with machine pressed 2.0mm PVC edge band on all

sides. Worksurface HT shall be 750mm

STRUCTURAL SUPPORT SYSTEM:- Benching or Linear

Workstation shall be constructed using 50 x 50 mm MS Pipe

with caps & levellers for legs & 40 x 40 mm MS Powder

Coated Pipes for cross members with brackets for best

TILE BASED PARTITION SYSTEM - The Main partition

60mm thick and Return Partition 28mm thick & 1200mm ht.

22 With top Panel in Pinup Fabric Board / Fabric of approved 4.00 Each 16,160.00

shade and color per workstation , lower panel in laminated

finish on both sides. All trims in anodized/ Powder Coated

finish. Partition system have adequate raceway at Single and

double level for running data & power cables. (Raceway

Above the Table Top Considered)

PED 3 MS DWR (2B+1F) WITH LEVELER 406LX459DX680H -

to be made of 18mm thick Prelaminated Partical Board.

With PVC Edge band. Consist of 3 no of Metal Drawer set

with SS C-TYPE Handle.

Low Back Chair (Staff)

Providing and Supplying a Low Back Chair Heavy Duty

Cushion of 32 Densities and cotton Base Mesh. Seat, Front

side with cotton Mesh and back side with designer PP

material, Metal Base with Chrome Finished and Nylon Twin

Wheel Castors according to BIFMA standard for long life and

heavy duty, BIFMA standard tested heavy duties hydraulics

for ling life, fixed PU Arm Rest, Central tilt mechanism and

seat cover common black, back rest colour - Navy

Blue/Black as per instruction of Engineer-In-Charge and

Medium Back Chair

Providing and supplying a Medium Back Chair Heavy Duty

Cushion cover with the Mesh, Cushion 40 Density, Cotton

Mesh back rest, framed in designer PP with adjustable

lumber support, Base and Nylon Twin Wheel Castors

according to BIFMA standard for long life and heavy duty,

BIFMA standard tested heavy duty hydraulics for long life,

Fixed PP arm rest, Synchro tilt mechanism with any

positioning locking mechanism, One year warranty, Colour

black , selection of chair should be as approved by Engineer-

In-Charge and Consultant.

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE, LILIYA Dist-

No. Description Quantity Unit Rate Total Amount

No. Description Quantity Unit Rate Total Amount

Waiting Chair : Providing & Fixing 4 Seater Waiting Chair -

Cross Beam made of black powder coated regular MS ERW

tube having 8.0+/-0.03 cm x 4.0 +/- .03 cm x 0.2 +/-

cm size. Legs to be chrom plated made of rolled steel with

0.12 +/- 0.013 cm thinkness.Seat and Back Shell to be

peforated made from cold rolled M.S. Sheet (DIN 1623 Part

1 ST -12 Grade), 0.14 +/- 0.013 cm thickness. The side Bar is

made of chrome Plate solid steel 3.0 cm +/- 0.03cm x 1.2 cm

+/- 0.03 cm with fluting and plastic inserts. The Shell to be

assembled on the cross beam with help of M8 Bolts.

WALL PUNNING WORK : Providing and applying minimum

12 mm thick in Wall and minimum 6 mm thick in ceiling,

including all labors, tools, tackles, scaffolding, surface

preparation, mixing of material, transportation (lead & lift)

applying in position, Leveling, finishing, cleaning etc.

26 complete to satisfaction of EIC. The rate also include making 156.49 Smt 292.90

of grooves above skirting, dado tiles and around window

and door jambs etc. (cost of Bonding agent to the ceiling or

RCC surfaces is to be included in the item). item shall be

used as per instruction of architect/ GRIMCO Manager.

Providing and fixing fully glazed & fully paneled aluminium

partition as per detail drawing with frame of coloured

anodized aluminium section of size 63 mm x 38.10 mm x1.2

mm (of Jindal section No. 2434, @ Wt. 0.64 Kg per mt) and

mm thick (Modi Float or Saint Gobain brand) ground glass

27 (Frosted or obscured on one side) fixed with rubber gasket 21.21 Smt 6,499.35

at top & 5 mm thick laminated compact sheet at bottom

including glazing clip of size 19 mm x 17 mm weight @

kg/m etc.complete as direction of Engineer In charge.

Providing and fixing partly glazed & partly paneled

aluminium partition as per detail drawing with frame of

coloured anodized aluminium section of size 63 mm x

mm x1.2 mm (of Jindal section No. 2434, @ Wt. 0.64 Kg per

mt) and 5 mm thick (Modi Float or Saint Gobain brand)

ground glass (Frosted or obscured on one side) fixed with

rubber gasket at top & 5 mm thick laminated compact sheet

at bottom including glazing clip of size 19 mm x 17 mm

weight @ 0.12 kg/m etc.complete as direction of Engineer In

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE, LILIYA Dist-

No. Description Quantity Unit Rate Total Amount

No. Description Quantity Unit Rate Total Amount

Providing and fixing flush door both sides laminated and

I.T.W. beading all around by using I.T.W. frame 120 m.m. x

80m.m.. shutter fabricated from 35 mm thick solid core

malemine faced three layered pre laminated flat pressed

wood based exterior grade bonded BWP/BWR synthetic

resin having stamped IS 12823 grade I type II including

29 three coats of lacquer polishing to exposed wooden 10.50 Smt 8,585.00

surfaces and Stainless steel decorative type designs fixtures

/ fastening 2Nos. Handles, 2Nos. Aldropes, towerbolt etc.

including I.T.W. triangular batten patti of size

30m.m.x30m.m.etc. as per architectural detailed drawing

and as directed by engineer in charge..

Providing and fixing hydraulic door closer of approved size

30 and made such equivalent as directed. all lift, level and leads. 5.00 Nos. 858.50

(work for all the floors)

Providing & Fixing 12 mm thick Tuffan Glass Door with glass

to glass hinges Fixed on Heavy Duty Floor Spring and towel

bar handle and necessary accessories with jointing with

silicon etc. Complete.

Gypsum False Ceiling-Providing and fixing gypsum board

false ceiling using standerd company section (gyp frame)

consists at G.I perimeter channels of size 0.55 thick having

one flange of 20 mm and another flange of 30 mm and web

of 27 mm along with perimeter of ceiling, screws fixed to

brick work/ concrete/ partition with help of nylon sleeves

and screws at610 mm centre. The suspending G.I.

intermediate channels of size 45 mm (0.9 mm thick with

flangs at 15mm each from the soffit at 1220 mm centrewith

ceiling angles of width 25mm x 10mm x 0.5 mm thick fixed

to soffit withG. I cleat and steel expansion fastners ceiling

32 section of .55 thick having kurled web 51.5 mm and 2 flangs 97.55 Smt 1,212.00

at 26 mm each with lip at 10.5 mm are fixed to intermediate

channel with help of connecting clips and in direction

perpendicular to the intermediate channel at 450mm centre

to centre including 12.5 mm tapered edge Gyp board

conforming to IS 2095 – 1982 is then screw fixed to ceiling

section with 25mm dry wall screws of approved quality and

make at 230mm centre, screw fixing is donemechanically

with drilling machine with suitable attachment. Finally

tapered edges at the cupboard are to be joint and finished so

as to have a flush look which includes filling and finishing

with jointing compound, paper tape etc. complete. Rate to be

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE, LILIYA Dist-

No. Description Quantity Unit Rate Total Amount

No. Description Quantity Unit Rate Total Amount

MASS STORAGE SYSTEM (COMPACTOR)

Providing and installation of Compactors , as per layout

plan, with knock down construction mechanical driven

mechanism made of 1mm thick CRCA steel confirming to IS:

513GR.D, Under carriage shall have a welded frame made of

HR Sheet 3.15mm thick. The steel parts shall be pretreated

and then epoxy powder coated with approved colour with a

dry film thickness of minimum 40 microns thickness.

(A) Double Faced Mobile Unit

Providing and fixing 3 mm thick PVC sheets as signage and

display of health signs/information of required size having

retro reflective letters/design as per requirement, fixing the

34 same through approved adhesive etc. complete work shall e 5.00 Each 606.00

carried out as per instruction of Engineer-in-charge

(Approved make PVC foamed sheet only) (45 x 15 cms.)

Supplying and fixing Board &Sinages with 3mm thick

exterior grade ACP of Aludecore,Alstrong or Eurobond

brand with Vinyl letters [Non Reflective] including propore

35 M.S.Structure of 45x45mm Hollow square box section of 3.00 Smt 2,727.00

20guage with one coat of Anticorrossive paint and two coat

of oil paint with required anchoring fastners etc.complete as

per directed.[A] Main board

Providing and erecting Inverter based approved make split

air-conditioning unit consisting of condensing unit with

variable speed fan motor, inverter type hermetically sealed

rotary compressor with accessories etc. duly connected

separately erected evaporating unit and blower motor with

its accessories by means of extra supplied proper insulated

copper tubing,drain PVC pipes suitable for ( cost includes

Eco Friendly green gas charging and 15A plug top & Remote

Control & MS Stand) with necessary core cutting.(B) for

ton capacity - Premium Cat.

Providing and erecting approved make Cassette type split

air-conditioning unit consisting of condensing unit with fan

motor, hermetically sealed scroll/rotary compressor with

accessories etc. duly connected separately erected

37 evaporating unit and blower motor with its accessories by 2.00 NOS 60,847.45

Eco friendly Green gas charging & Internal copper wiring &

Remote control ( 3 star and above of current year) with

necessary core cutting. (C) for 2 ton capacity

Supplying and erecting insulated pair of soft copper tubing

open or concealed including power and control

cable,necessary PVC drain pipes for Split AC machine up to

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE, LILIYA Dist-

No. Description Quantity Unit Rate Total Amount

No. Description Quantity Unit Rate Total Amount

Miniature circuit breaker single pole 6A to 32A suitable to

39 operate on 240 V A.C. system and having breaking capacity 10.00 Ea. 131.30

10 KA to be erected in existing box. confirming to IS

8828/1996 with ISI Mark. Cat.III

Providing & erecting 240 V MCB double pole switch for

motor & inductive load (C Curve) having 10 KA breaking

capacity & confirms to IS : 8828 in existing box having

following capacity (A) 6 to 32 Amp. Cat -III

Providing & erecting415 V MCB double pole switch for

motor & inductive load (C Curve) having 10 KA breaking

capacity & confirms to IS : 8828 in existing box having

following capacity (A) 40 Amp. Cat -III

Providing and erecting Sheet Steel powder coated Vertical

MCB distribution board (VTPN) - flush / surface mounted

double door (IP54) fitted with copper insulated busbar,

isolated neutral bar, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3, suitable for 250 AMP TPN

42 MCCB + RCCB as incomer and three phase outgoing as per 1.00 nos 3,437.03

following .(The DBs should be used of same company of

MCB to be used) (B) Three phase incoming and single phase

horizontal type ongoing per phase isolation type (PPI)

(b)sheet steel double door (ii) 6 way

providing & erecting Approved make ELCBs / RCCBs

conforming to IS: 12640 and having sensitivity of 30 mA and

Short Circuit withstand capacity of 6 KA and suitable for

operation on single phase 240 V. having characteristic of

quick action & tripping with all advance feature & do not

incorporate any electronic component.for following Max.

rating erected as directed. (ii) 40Amps. DP cat -iii

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

cable multistrand Aluminium conductor for 1.1 KV. to be

44 laid on wall with necessary clamps or in existing trench / 175.00 mtr 176.75

pipe of following size of cables (A) 4 core 16 Sq. mm

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

cable multistrand Aluminium conductor for 1.1 KV. to be

45 laid on wall with necessary clamps or in existing trench / 85.00 mtr 161.60

pipe of following size of cables (A) 4 core 16 Sq. mm

solder less crimping type alluminium lugs conforming to IS

suitable for cable of following size evenly crimped with high

46 pressure to cl & connected to switch gear terminals with 8.00 Nos 14.14

brass /cadmium plated nut bolts in an approved manner.(b)

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE, LILIYA Dist-

No. Description Quantity Unit Rate Total Amount

No. Description Quantity Unit Rate Total Amount

solder less crimping type alluminium lugs conforming to IS

suitable for cable of following size evenly crimped with high

47 pressure to cl & connected to switch gear terminals with 8.00 Nos 17.17

brass /cadmium plated nut bolts in an approved manner.(b)

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

cable multistrand Aluminium conductor for 1.1 KV. to be

48 laid on wall with necessary clamps or in existing trench / 6.00 Nos 17.17

pipe of following size of cables (C) 16/25 Sq.mm.

Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire

of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multistrand copper wires, in following

type of pipe to be erected concealed in/ on surface on

wall/ceiling complete with 6A Modular type switch / bell

push & accessories and earth continuity of following type,

erected on PVC / Metallic box, single mounting base frame

covered with textured/metallic front plate modules erected

49 on / in wall / ceiling as per pipe erected, with necessary 26.00 Ea. 449.45

Lamp holder/ceiling rose / H.D.Connector as

directed.covered with textured/metallic front plate modules

erected on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose / H.D.Connector as

directed. (a) with medium class Rigid PVC pipe and

accessories. Cat. III

Point wiring for secondary light point with 2-1.5 sq.mm &

earthwire of 1.5 sq.mm (green) both are of ISI marked

KV grade FRLS PVC insulated multistrand copper wires, in

following type of pipe to be erected concealed in / flushed

on wall/ceiling, complete with earth continuity and

necessary connection with primary light with moduler

50 accessories erected on Metal / PVC box covered with 3 mm 18.00 Ea. 303.00

thick PC(Polycarbonet) / Acrylic sheet for open / concealed

wiring.with necessary Lamp holder / ceiling rose /

H.D.Connector as directed. (a) with medium class Rigid PVC

pipe and accessories erected conceealed in wall /ceiling

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE, LILIYA Dist-

No. Description Quantity Unit Rate Total Amount

No. Description Quantity Unit Rate Total Amount

Point wiring for two way controlled light point with 2-1.5

sq.mm & earthwire of 1.5 sq.mm (green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multistrand

copper wires, in following type of pipe to be erected

concealed in / flushed on wall/ceiling, complete with earth

continuity and necessary connection with primary light with

51 moduler accessories erected on Metal / PVC box covered 4.00 Ea. 560.55

with 3 mm thick PC(Polycarbonet) / Acrylic sheet for open

/ concealed wiring.with necessary Lamp holder / ceiling

rose / H.D.Connector as directed. (a) with medium class

Rigid PVC pipe and accessories erected conceealed in wall

/ceiling complete

Point wiring for Looped Plug with 6A Modular type switch &

5 pin socket erected on PVC / Metallic box, single mounting

52 base frame covered with textured / metallic front plate 10.00 PT. 241.39

modules erected on / in wall / ceiling with following type

accssories. Cat. III

Point wiring for FAN with 2-1.5 sq.mm & earthwire of

sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS

PVC insulated multistrand copper wires, in following type of

pipe to be erected concealed in / flushed on wall/celing

complete with 6A Modular type switch and hum free EME

four or more step type electronic fan regulator with

separately mounted and accessories with earth continuity

53 of following type erected on PVC / Metallic box, single 12.00 PT. 629.23

mounting base frame covered with textured/metallic front

plate modules erected on / in wall / ceiling as per pipe

erected.with necessary ceiling rose / H.D.Connector as

directed. (a) with medium class Rigid PVC pipe and

accessories. Cat. III

Providing & erecting Switch board for Computer or electric

apparatus consisting of following items in single board

erected on PVC / Metal board with 3 mm thick PC

(Polycarbonet) / Acrylic sheet erected as directed 1 no.

6A/16A universal plug-switch combined. 1 no. 6A/16A

universal plug-switch combined. 4 nos. 6A Switch. 4 nos. 6A

5 pin Plug. [B] For Modular Type Accessories. Cat. III

Point wiring for Individual Plug with & earthwire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multistrand copper wires, in existing pipe

duly erected complete with Modular type switch & 5 pin

Plug erected on PVC / Metallic box covered with

appropriate front plate modules erected on / in wall /

ceiling as per pipe erected with following type of

accessories. [I] For 6A Plug with 2-1.5 sq.mm Cu. Wire. (a)

with medium class Rigid PVC pipe and accessories. Cat. III

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE, LILIYA Dist-

No. Description Quantity Unit Rate Total Amount

No. Description Quantity Unit Rate Total Amount

[II] For 16A Plug with 2-2.5 sq.mm Cu. Wire. (a) with

medium class Rigid PVC pipe and accessories. Cat. III

[III] For 16A Plug with 2-4 sq.mm Cu. Wire. (a) with medium

class Rigid PVC pipe and accessories. Cat. III

Providing following type of Modular Type Accessories

mounted with pvc / metallic box, single mounting base

frame covered with textured / metallic front plate , modules

erected with necessary connection. As desired by Engineer

Incharge. (3) Two Pin/RJ-11 Telephone Socket. [A] For One

59 (8) Modem Jack for Computer Open RJ-45 12.00 Ea. 181.80

60 (4) TV Co-axial Socket outlet. Cat.III 2.00 Ea. 151.50

61 (7) Blank Plate Single Cat -III 25.00 Nos 24.24

62 (19) Modular Indicating Call Bell Cat -III 10.00 Nos 151.50

63 (20) Modular Buzzer 1.00 Nos 149.48

(14) 6A/ 10A/ 16A/ 20A/ 25A/ 32A Double Pole Modular

Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to

be erected concealed in /flushed with wall/ceiling, with

65 sq. mm copper conductor FRLS PVC insulated stranded wire 315.00 mtr. 80.80

of green colour for earth continuity of following size. (a)

with medium class Rigid PVC pipe and accessories. (a)

wire 1.5 sq. mm

Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in existing pipe erected

with 2.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of

following size. (a) with medium class Rigid PVC pipe and

accessories. (a) 2 wire 4 sq. mm

Providing and erecting ISI mark Medium class RIGID PVC

PIPES of following size complete to be erected on/in wall or

ceiling erected with necessary PVC fittings & Junction boxes

fixed with adhesive solution & Clamps with following dia of

pipes, in approved manner as directed. (a) 20 mm

Providing and erecting ISI mark Medium class RIGID PVC

PIPES of following size complete to be erected on/in wall or

ceiling erected with necessary PVC fittings & Junction boxes

fixed with adhesive solution & Clamps with following dia of

pipes, in approved manner as directed. (b) 25 mm

Providing and erecting ISI mark Medium class RIGID PVC

PIPES of following size complete to be erected on/in wall or

ceiling erected with necessary PVC fittings & Junction boxes

fixed with adhesive solution & Clamps with following dia of

pipes, in approved manner as directed. (b) 32 mm

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE, LILIYA Dist-

No. Description Quantity Unit Rate Total Amount

No. Description Quantity Unit Rate Total Amount

Providing & erecting PVC Corrugated Flexible Conduit with

71 required nos. of coupling, PVC bushes, Check-nuts etc. 95.00 mtr 16.16

complete of following sizes. (1) 20 mm

Supplying & erecting UPVC Mini trunking (PVC Casing-n-

Capping) having double-locking arrangement with grooves,

trunking of size not below 12.5 mm in height as per IS with

accessories of PVC/Resin polypropylene not below 1.8 mm

thick duly sealed in joint & erected on wall / ceiling of

following size . (2) 25 mm

Supplying and laying UPVC cable trunking system

comprising unplasticised polyvinyl, chloride rigid material

with ignition free and flame proof confirming BS with

73 necessary end caps Internal and external bend, flat bends, 58.00 mtr 222.20

coupler, tee etc..All necessary accessories and measuring of

following sizes (3) 50 mm x 50 mm trunking

Providing & Erecting approved make following size of TV Co-

axial flexible cable comprising inner conductor of solid bare

copper insulated with Foam PE & Secondary conductor

made of poly - Aluminium film bonded Al. Braids @ suitable

coverage overall sheathed with black PVC insulation. (b)

Supplying & erecting approved make Telephone Cable

electrolytic copper conductor PE insulation twisted in two

pairs, & wrapped with FRLS PVC tape & sheathed with

FRLS PVC or HFFR outer Jacket suitable for telephone wiring

& confirming to C-DOT erected in existing pipe. of following

size of conductors & nos.of pairs. With necessary

connections. [A] Conductor Size 0.5 mm (a) Unarmoured

Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA polyester powder coated

and high U.V. & corrosion resistance with diffuser 120 to

300 V,Power Factor more than 0.9, THD < 10 %, CCT 3000 K

to 6500K, Uniformity ratio >0.7,

Luminaire efficacy> 85 lumens/watt , LED driver efficiency

> 85 % (A) Tube Light with integral/ non-integral driver (d)

20 Watts, Surge - 4KV,IP-20, 4 feet Cat-lll.

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE, LILIYA Dist-

No. Description Quantity Unit Rate Total Amount

No. Description Quantity Unit Rate Total Amount

Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA polyester powder coated

and high U.V. & corrosion resistance with diffuser 120 to

300 V,Power Factor more than 0.9, THD < 10 %, CCT 3000 K

77 to 6500K, Uniformity ratio >0.7, 36.00 Ea. 656.50

Luminaire efficacy> 85 lumens/watt , LED driver efficiency

> 85 % © Square/ Circular Surface/Recessed Mounted

Downlight with provision for spring loaded mounting clips

complete. (b) 12/13 watts, Surge-4 KV Cat-lll

Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA polyester powder coated

and high U.V. & corrosion resistance with diffuser 120 to

300 V,Power Factor more than 0.9, THD < 10 %, CCT 3000 K

to 6500K, Uniformity ratio >0.7, Luminaire efficacy>

lumens/watt , LED driver efficiency > 85 % © Square/

Circular Surface/Recessed Mounted Downlight with

provision for spring loaded mounting clips complete. (b)

watts, Surge-4 KV Cat-lll

Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA polyester powder coated

and high U.V. & corrosion resistance with diffuser 120 to

300 V, Power Factor more than 0.9, THD < 10 %, CCT

79 K to 6500K, Uniformity ratio >0.7, 4.00 Ea. 797.90

Luminaire efficacy> 85 lumens/watt , LED driver efficiency

> 85 % © Square/ Circular Surface/Recessed Mounted

Downlight with provision for spring loaded mounting clips

complete. © 18 watts, Surge-4 KV Cat-lll

Providing and erecting approved make decorative recess

mounting Down Lighter fittings with anodized Aluminium

reflector suitable for compact flourcent lamp with copper

80 ballast holder and necessary lead wire. 2.00 Ea. 858.50

(B)With One Lamp non retrofit 15/18/26 W C.F.L. Cat III

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE, LILIYA Dist-

No. Description Quantity Unit Rate Total Amount

No. Description Quantity Unit Rate Total Amount

Providing & erecting Approved make Power Saving 50 Watt

Ceiling Fan with double ball bearing ISI mark with

Condenser 230 volt A.C. 50 Hz 1200 mm sweep complete

81 having 3blades with aluminium blades with , canopy & 30 12.00 nos. 2,121.00

cms. down rod erected with 24/ 0.2, 3 core flexible wire

with earthing.(Havells, Orient, Crompton, Anchor,

Supplying & erecting approved make low noise decorative

exhaust fan having size 200mm with 1350 RPM with square

frame ABS body with inbuilt lowers & square frame.

Supplying & erecting Approved make call bell indicator with

buzzing sound and Red light indicating lamp with Red light

button to attend the call suitable for 240 v 50 c/s supply to

Providing and erecting required size HOT deep Galvanised

iron strip for earthing of H.T. OCB / ACB/ Transformer, LT

pannel board, Motors etc. using copper clamp.

Providing and erecting Annealed bare copper wire 8 to

Providing and erecting HOT deep Galvanised iron strip wire

MISsecelaneous Removing all electrical material

/equipment form existing set up with proper safety majors

and also handover to client representive /PMC/ Architect

team as per Requirement

Re use the electrical material as per client's representative

88 /architect / Engineer in charge instruction 1.00 Job 8,080.00

Supplying labour for removing and filling all type civil

/electrical HVAC of debris including construction waste

89 materials and cleaning or any other type work for 8 hr per 15.00 2,121.00

day with all lead and lift comp. as directed /suggested by

Grimco Engineer in charge

Missecelaneous civil work like wall jury,cut out & opening to

pass piping tray ,wire ,pipes & drain pipes including with Per

refinishing & plastering the same to the original finish. Job

Providing & erecting water cooler having storage capacity

150 Ltr. & cooling capacity 150 Ltr.per hour @ an ambient

temp of 450 C. The outlet temp. of the water should drop by

150C within a hour, The water cooler should be comprising

of hermetically sealed compressor, fan motor, condensing

unit, water tank surrounded by evaporating, coil,

thermostats, relay etc.complete with necessary inlet &

outlet connection. The body of water cooler will be made

from Stainless Steel.

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE, LILIYA Dist-

No. Description Quantity Unit Rate Total Amount

No. Description Quantity Unit Rate Total Amount

Supplying & erecting 5 stage single reverse osmosis water

purification system with M.S. powder coated frame, prefilter

housing with 'O' ring presediment filter GAC filter, carbon

filter suitable buster DC pump capacity 80 psi, mention with

40 Osg inline type post carbon filter auto low & high

pressure switches with following size of storage tank & LPH

capacity & erected as directed with one year comprehensive

maintenance guarantee. [C] 50 Ltr / Hr with 250 psi 2 nos

Supplying & erecting approved make LAN cable of following

93 size in existing pipe as per direction [C] CAT - 6 250.00 Rmt. 51.51

Providing & erecting main Distribution (MDF) indoor type,

94 back mounted frame as per DoT standard approved with 2.00 nos 1,119.08

krone strips (a) Suitable for 10 pair

Supplying and erecting of 43 " UHD LED display for CCTV

monitoring and checking (the scope include the stand and

other necessary accessories to complete the job

Supplying & erecting carbon dioxide (CO2) fire extinguisher

user of following capacity with necessary clamps made from

96 50 x 6 mm M.S. Flat with nut & bolts grouted in wall 4.00 No 6,591.26

[A] For 4.5 Kg Capacity

Amount with GST

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE, PALITANA Dist-

No. Description Quantity Unit Rate Total Amount

No. Description Quantity Unit Rate Total Amount

Removing dry or oil bound distemper by a washing and

scraping and sand papering the wall surface smooth

including necessary repairs to scratches complete.

Demolition of existing False Ceiling including stacking of

2 serviceable materilas and disposal of unserviceable 41.15 Smt 53.53

materials with all lead and lift.

Providing and applying two coats of Birla or Asian acrylic

lapy (putty) & two coats of primer of approved brand and

manufacture on new wall surface to give an even shade

including thoroughly brushing the surface free from mortar

dropping and other foreign matter and sand papered

smooth and Wall painting (three coats) with plastic

emulsion paint of approved brand and manufacture on

under coated wall surface to give and even shade including

throughly brushing the surface free from mortor droppings

and other foreign matter and sand paperd smooth on new

work to give an even shade for all height

Providing and fixing standared extruded of domal

alluminium section of size 50 mm x 25 mm x 1.2mm (Jindal

4 or equivalent) with colour anodized 60 micron alluminium 0.72 Smt 2,140.19

frame for ventilation with 5 mm thick frosted glass as

details etc complete for Ventilation

Providing and laying 18 mm thick polished granite stone

machine cut in single piece (Max. available) in sill and jambs

of door, window, ventilation & lift wall cladding, staircase

flooring landing, risers & treads, skirting laid over 10 mm

thick cement mortar 1:3 (1 cement : 3 coarse sand) and

5 jointed with grey cement slurry with matching pigment incl. 25.68 Smt 2,716.90

rubbing and polishing, half rounding edge and incl. fixing of

hilty fastener at every 1/3 span of sill as required size etc.

complete colour and shed as approved by architect engineer

Removing Exisitng AC & window grill as per instruction &

fixing existing grill with require hardware,adhesive material

6 & welding with proper finish as per architect /Grimco 1.00 Job 15,150.00

Engineer in charges instruction.

Providing and fixing roller blind fixed on window level on

wooden battern and curtain lift with cotton thin rope ,design

and colour as per instruction by Grimo Engineer in charge /

Architect with necessary hardware fitting ,material and

labour etc .complete as per instrction of Architect /Grimco

Engineer in charge.

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE, PALITANA Dist-

No. Description Quantity Unit Rate Total Amount

No. Description Quantity Unit Rate Total Amount

Providing & applying synthetic enamel paint (and repair

grill as epr site situation -proper finishing ,levellng ,welding

,cleaning )of apprvoed brand to previosly painted steel work

8 with one coat of approved quality and brand paint make and 19.58 smt 262.60

of required shade ,including cleaning and scrapping the

surface with sand paper etc completed as directed .

cleaning office glass ,wall window ,table with required

material broom ,dust pan ,squeegee, sprey cleaner,mop as

per instruction by Architect /Grimco Engineer in charge.

Demolition of existing civil work ,interior ,ELV,MEP &

electrical work including stacking of serviceable materials

10 and disposal of unserviceable materials with all lead and lift 1.00 Job 18,180.00

as per instruction of architect /Grimco Engineer in charge.

Dismentaling tiled of stone floors laid in mortar including

11 stacking of serviceable materilas and disposal of 127.27 smt 49.18

unserviceable materials with all lead and lift.

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse

sand) on new surface or fixing on existing flooring by

adhesive material including dismentaling of existing flooring

and jointed with color cement slurry including finised with

flush pointing & cleaning the surface etc. complete for DARK

shade /light shade

Removing and scraping of old deteriorated plaster of any

thickness fromm wall / R.C.C member including stacking of

serviceable material and disposal of unserviceable from site

of work with all lead and lift

Providing & fixing handicape tractile tiles (shelf adhesive

)the tiles shall be fixed with suitable adhesive /scrue

material with all required additional hardware support or

tiles laid on 20 bed of 20 mm (avg) base of cement mortar

1:6 (1 cement :6 Coarse sand ) on new surface /old surface

14 with 4 mm epoxy and joined with colour cement slurry 10.50 smt 6,464.00

including finishing with flush pointing & cleaning the

surface etc rate shall be including transportation ,all floor

hardware ,adhesive material etc as per architect /Grimco

Engineer in charge.

Providing ,removing ,existing door closer and fixing door

closer and blue space solid standoffs heavy -duty

15 commercial grade -304 stainless steel push pull door handle 4.00 Nos 2,777.50

rate shall be including fitting charge.as per architect

/grimco engineer in charge.

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE, PALITANA Dist-

No. Description Quantity Unit Rate Total Amount

No. Description Quantity Unit Rate Total Amount

Door laminate change.to be removed & rifixing providing &

fixing both side 1 1mm laminate & existing removing

laminate door or washable type material of good quality

with appropriate adhesive of approved quality like fevicol or

its equivalent brands with smooth finishing and in line level

with regular edges as per requirment and site situation

including cutting and necessary cut outs of glass and cut out

finish with plywood with selected laminate & door if any

required etc complete in all respects all rates are inclusive

of hardware like nails , screws , abro taps ,adhesive etc

Demolition and disposal of unserviceable materials with all

lead and lift.(i) Lime concrete.

Providing and laying cement concrete 1:2:4 (1- Cement : 2-

Coarse sand : 4- graded stone aggregates 20 mm nominal

size) and curing complete excluding cost of formwork in (A)

Foundation and Plinth

WORKTOP to be made of 25 mm thick Prelaminated particle

board with machine pressed 2.0mm PVC edge band on all

sides. Worksurface HT shall be 750mm

STRUCTURAL SUPPORT SYSTEM:- Benching or Linear

Workstation shall be constructed using 50 x 50 mm MS Pipe

with caps & levellers for legs & 40 x 40 mm MS Powder

Coated Pipes for cross members with brackets for best

TILE BASED PARTITION SYSTEM - The Main partition

60mm thick and Return Partition 28mm thick & 1200mm ht.

19 With top Panel in Pinup Fabric Board / Fabric of approved 5.00 Each 16,160.00

shade and color per workstation, lower panel in laminated

finish on both sides. All trims in anodized/ Powder Coated

finish. Partition system have adequate raceway at Single and

double level for running data & power cables. (Raceway

Above the Table Top Considered)

PED 3 MS DWR (2B+1F) WITH LEVELER 406LX459DX680H -

to be made of 18mm thick Prelaminated Partical Board.

With PVC Edge band. Consist of 3 no of Metal Drawer set

with SS C-TYPE Handle.

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE, PALITANA Dist-

No. Description Quantity Unit Rate Total Amount

No. Description Quantity Unit Rate Total Amount

Medium Back Chair

Providing and supplying a Medium Back Chair Heavy Duty

Cushion cover with the Mesh, Cushion 40 Density, Cotton

Mesh back rest, framed in designer PP with adjustable

lumber support, Base and Nylon Twin Wheel Castors

according to BIFMA standard for long life and heavy duty,

BIFMA standard tested heavy duty hydraulics for long life,

Fixed PP arm rest, Synchro tilt mechanism with any

positioning locking mechanism, One year warranty, Colour

black, selection of chair should be as approved by Engineer-

In-Charge and Consultant.

WALL PUNNING WORK : Providing and applying minimum

12 mm thick in Wall and minimum 6 mm thick in ceiling,

including all labors, tools, tackles, scaffolding, surface

preparation, mixing of material, transportation (lead & lift)

applying in position, Leveling, finishing, cleaning etc.

21 complete to satisfaction of EIC. The rate also include making 158.17 Smt 292.90

of grooves above skirting, dado tiles and around window

and door jambs etc. (cost of Bonding agent to the ceiling or

RCC surfaces is to be included in the item). item shall be

used as per instruction of architect/ GRIMCO Manager.

Providing and fixing fully glazed & fully paneled aluminium

partition as per detail drawing with frame of coloured

anodized aluminium section of size 63 mm x 38.10 mm x1.2

mm (of Jindal section No. 2434, @ Wt. 0.64 Kg per mt) and

mm thick (Modi Float or Saint Gobain brand) ground glass

(Frosted or obscured on one side) fixed with rubber gasket

at top & 5 mm thick laminated compact sheet at bottom

including glazing clip of size 19 mm x 17 mm weight @

kg/m etc.complete as direction of Engineer In charge.

Providing and fixing partly glazed & partly paneled

aluminium partition as per detail drawing with frame of

coloured anodized aluminium section of size 63 mm x

mm x1.2 mm (of Jindal section No. 2434, @ Wt. 0.64 Kg per

mt) and 5 mm thick (Modi Float or Saint Gobain brand)

ground glass (Frosted or obscured on one side) fixed with

rubber gasket at top & 5 mm thick laminated compact sheet

at bottom including glazing clip of size 19 mm x 17 mm

weight @ 0.12 kg/m etc.complete as direction of Engineer In

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE, PALITANA Dist-

No. Description Quantity Unit Rate Total Amount

No. Description Quantity Unit Rate Total Amount

Providing and fixing flush door both sides laminated and

I.T.W. beading all around by using I.T.W. frame 120 m.m. x

80m.m.. shutter fabricated from 35 mm thick solid core

malemine faced three layered pre laminated flat pressed

wood based exterior grade bonded BWP/BWR synthetic

resin having stamped IS 12823 grade I type II including

24 three coats of lacquer polishing to exposed wooden surfaces 12.60 Smt 8,585.00

and Stainless steel decorative type designs fixtures /

fastening 2Nos. Handles, 2Nos. Aldropes, towerbolt etc.

including I.T.W. triangular batten patti of size

30m.m.x30m.m.etc. as per architectural detailed drawing

and as directed by engineer in charge..

Providing and fixing hydraulic door closer of approved size

25 and made such equivalent as directed. all lift, level and leads. 10.00 Nos. 858.50

(work for all the floors)

Providing & Fixing 12 mm thick Tuffan Glass Door with glass

to glass hinges Fixed on Heavy Duty Floor Spring and towel

bar handle and necessary accessories with jointing with

silicon etc. Complete.

Providing and Fixing 5% Sun Screen Roller Blind with

Superior Quality Acmeda Mechanism including all necessary

fittings like Bracket Chain etc. Complete as per instructions

of Engineer In-charge.

Gypsum False Ceiling-Providing and fixing gypsum board

false ceiling using standerd company section (gyp frame)

consists at G.I perimeter channels of size 0.55 thick having

one flange of 20 mm and another flange of 30 mm and web

of 27 mm along with perimeter of ceiling, screws fixed to

brick work/ concrete/ partition with help of nylon sleeves

and screws at610 mm centre. The suspending G.I.

intermediate channels of size 45 mm (0.9 mm thick with

flangs at 15mm each from the soffit at 1220 mm centrewith

ceiling angles of width 25mm x 10mm x 0.5 mm thick fixed

to soffit withG. I cleat and steel expansion fastners ceiling

28 section of.55 thick having kurled web 51.5 mm and 2 flangs 83.48 Smt 1,212.00

at 26 mm each with lip at 10.5 mm are fixed to intermediate

channel with help of connecting clips and in direction

perpendicular to the intermediate channel at 450mm centre

to centre including 12.5 mm tapered edge Gyp board

conforming to IS 2095 – 1982 is then screw fixed to ceiling

section with 25mm dry wall screws of approved quality and

make at 230mm centre, screw fixing is donemechanically

with drilling machine with suitable attachment. Finally

tapered edges at the cupboard are to be joint and finished so

as to have a flush look which includes filling and finishing

with jointing compound, paper tape etc. complete. Rate to be

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE, PALITANA Dist-

No. Description Quantity Unit Rate Total Amount

No. Description Quantity Unit Rate Total Amount

MASS STORAGE SYSTEM (COMPACTOR)

Providing and installation of Compactors, as per layout plan,

with knock down construction mechanical driven

mechanism made of 1mm thick CRCA steel confirming to IS:

513GR.D, Under carriage shall have a welded frame made of

HR Sheet 3.15mm thick. The steel parts shall be pretreated

and then epoxy powder coated with approved colour with a

dry film thickness of minimum 40 microns thickness.

(A) Double Faced Mobile Unit

Providing and fixing 3 mm thick PVC sheets as signage and

display of health signs/information of required size having

retro reflective letters/design as per requirement, fixing the

30 same through approved adhesive etc. complete work shall e 3.00 Each 606.00

carried out as per instruction of Engineer-in-charge

(Approved make PVC foamed sheet only) (45 x 15 cms.)

Supplying and fixing Board &Sinages with 3mm thick

exterior grade ACP of Aludecore,Alstrong or Eurobond

brand with Vinyl letters [Non Reflective] including propore

31 M.S.Structure of 45x45mm Hollow square box section of 3.00 Smt 2,727.00

20guage with one coat of Anticorrossive paint and two coat

of oil paint with required anchoring fastners etc.complete as

per directed.[A] Main board

Providing and erecting Inverter based approved make split

air-conditioning unit consisting of condensing unit with

variable speed fan motor, inverter type hermetically sealed

rotary compressor with accessories etc. duly connected

separately erected evaporating unit and blower motor with

32 its accessories by means of extra supplied proper insulated 3.00 NOS 48,257.80

copper tubing,drain PVC pipes suitable for ( cost includes

Eco Friendly green gas charging and 15A plug top & Remote

Control & MS Stand) with necessary core cutting.(B) for

ton capacity - Premium Cat.

Providing and erecting approved make Cassette type split

air-conditioning unit consisting of condensing unit with fan

motor, hermetically sealed scroll/rotary compressor with

accessories etc. duly connected separately erected

33 evaporating unit and blower motor with its accessories by 2.00 NOS 60,847.45

Eco friendly Green gas charging & Internal copper wiring &

Remote control ( 3 star and above of current year) with

necessary core cutting. (C) for 2 ton capacity

Supplying and erecting insulated pair of soft copper tubing

open or concealed including power and control

cable,necessary PVC drain pipes for Split AC machine up to

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE, PALITANA Dist-

No. Description Quantity Unit Rate Total Amount

No. Description Quantity Unit Rate Total Amount

Miniature circuit breaker single pole 6A to 32A suitable to

35 operate on 240 V A.C. system and having breaking capacity 12.00 Ea. 131.30

10 KA to be erected in existing box. confirming to IS

8828/1996 with ISI Mark. Cat.III

Providing & erecting 240 V MCB double pole switch for

motor & inductive load (C Curve) having 10 KA breaking

capacity & confirms to IS : 8828 in existing box having

following capacity (A) 6 to 32 Amp. Cat -III

Providing & erecting415 V MCB double pole switch for

motor & inductive load (C Curve) having 10 KA breaking

capacity & confirms to IS : 8828 in existing box having

following capacity (A) 40 Amp. Cat -III

Providing and erecting Sheet Steel powder coated Vertical

MCB distribution board (VTPN) - flush / surface mounted

double door (IP54) fitted with copper insulated busbar,

isolated neutral bar, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3, suitable for 250 AMP TPN

38 MCCB + RCCB as incomer and three phase outgoing as per 1.00 nos 3,437.03

following .(The DBs should be used of same company of

MCB to be used) (B) Three phase incoming and single phase

horizontal type ongoing per phase isolation type (PPI)

(b)sheet steel double door (ii) 6 way

providing & erecting Approved make ELCBs / RCCBs

conforming to IS: 12640 and having sensitivity of 30 mA and

Short Circuit withstand capacity of 6 KA and suitable for

operation on single phase 240 V. having characteristic of

quick action & tripping with all advance feature & do not

incorporate any electronic component.for following Max.

rating erected as directed. (ii) 40Amps. DP cat -iii

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

cable multistrand Aluminium conductor for 1.1 KV. to be

40 laid on wall with necessary clamps or in existing trench / 155.00 mtr 176.75

pipe of following size of cables (A) 4 core 16 Sq. mm

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

cable multistrand Aluminium conductor for 1.1 KV. to be

41 laid on wall with necessary clamps or in existing trench / 75.00 mtr 161.60

pipe of following size of cables (A) 4 core 16 Sq. mm

solder less crimping type alluminium lugs conforming to IS

suitable for cable of following size evenly crimped with high

42 pressure to cl & connected to switch gear terminals with 8.00 Nos 14.14

brass /cadmium plated nut bolts in an approved manner.(b)

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE, PALITANA Dist-

No. Description Quantity Unit Rate Total Amount

No. Description Quantity Unit Rate Total Amount

solder less crimping type alluminium lugs conforming to IS

suitable for cable of following size evenly crimped with high

43 pressure to cl & connected to switch gear terminals with 8.00 Nos 17.17

brass /cadmium plated nut bolts in an approved manner.(b)

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

cable multistrand Aluminium conductor for 1.1 KV. to be

44 laid on wall with necessary clamps or in existing trench / 6.00 Nos 17.17

pipe of following size of cables (C) 16/25 Sq.mm.

Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire

of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multistrand copper wires, in following

type of pipe to be erected concealed in/ on surface on

wall/ceiling complete with 6A Modular type switch / bell

push & accessories and earth continuity of following type,

erected on PVC / Metallic box, single mounting base frame

covered with textured/metallic front plate modules erected

45 on / in wall / ceiling as per pipe erected, with necessary 25.00 Ea. 449.45

Lamp holder/ceiling rose / H.D.Connector as

directed.covered with textured/metallic front plate modules

erected on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose / H.D.Connector as

directed. (a) with medium class Rigid PVC pipe and

accessories. Cat. III

Point wiring for secondary light point with 2-1.5 sq.mm &

earthwire of 1.5 sq.mm (green) both are of ISI marked

KV grade FRLS PVC insulated multistrand copper wires, in

following type of pipe to be erected concealed in / flushed

on wall/ceiling, complete with earth continuity and

necessary connection with primary light with moduler

46 accessories erected on Metal / PVC box covered with 3 mm 20.00 Ea. 303.00

thick PC(Polycarbonet) / Acrylic sheet for open / concealed

wiring.with necessary Lamp holder / ceiling rose /

H.D.Connector as directed. (a) with medium class Rigid PVC

pipe and accessories erected conceealed in wall /ceiling

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE, PALITANA Dist-

No. Description Quantity Unit Rate Total Amount

No. Description Quantity Unit Rate Total Amount

Point wiring for two way controlled light point with 2-1.5

sq.mm & earthwire of 1.5 sq.mm (green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multistrand

copper wires, in following type of pipe to be erected

concealed in / flushed on wall/ceiling, complete with earth

continuity and necessary connection with primary light with

47 moduler accessories erected on Metal / PVC box covered 4.00 Ea. 560.55

with 3 mm thick PC(Polycarbonet) / Acrylic sheet for open

/ concealed wiring.with necessary Lamp holder / ceiling

rose / H.D.Connector as directed. (a) with medium class

Rigid PVC pipe and accessories erected conceealed in wall

/ceiling complete

Point wiring for Looped Plug with 6A Modular type switch &

5 pin socket erected on PVC / Metallic box, single mounting

48 base frame covered with textured / metallic front plate 8.00 PT. 241.39

modules erected on / in wall / ceiling with following type

accssories. Cat. III

Point wiring for FAN with 2-1.5 sq.mm & earthwire of

sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS

PVC insulated multistrand copper wires, in following type of

pipe to be erected concealed in / flushed on wall/celing

complete with 6A Modular type switch and hum free EME

four or more step type electronic fan regulator with

separately mounted and accessories with earth continuity

49 of following type erected on PVC / Metallic box, single 13.00 PT. 629.23

mounting base frame covered with textured/metallic front

plate modules erected on / in wall / ceiling as per pipe

erected.with necessary ceiling rose / H.D.Connector as

directed. (a) with medium class Rigid PVC pipe and

accessories. Cat. III

Providing & erecting Switch board for Computer or electric

apparatus consisting of following items in single board

erected on PVC / Metal board with 3 mm thick PC

(Polycarbonet) / Acrylic sheet erected as directed 1 no.

6A/16A universal plug-switch combined. 1 no. 6A/16A

universal plug-switch combined. 4 nos. 6A Switch. 4 nos. 6A

5 pin Plug. [B] For Modular Type Accessories. Cat. III

Point wiring for Individual Plug with & earthwire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multistrand copper wires, in existing pipe

duly erected complete with Modular type switch & 5 pin

Plug erected on PVC / Metallic box covered with

appropriate front plate modules erected on / in wall /

ceiling as per pipe erected with following type of

accessories. [I] For 6A Plug with 2-1.5 sq.mm Cu. Wire. (a)

with medium class Rigid PVC pipe and accessories. Cat. III

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE, PALITANA Dist-

No. Description Quantity Unit Rate Total Amount

No. Description Quantity Unit Rate Total Amount

[II] For 16A Plug with 2-2.5 sq.mm Cu. Wire. (a) with

medium class Rigid PVC pipe and accessories. Cat. III

[III] For 16A Plug with 2-4 sq.mm Cu. Wire. (a) with medium

class Rigid PVC pipe and accessories. Cat. III

Providing following type of Modular Type Accessories

mounted with pvc / metallic box, single mounting base

frame covered with textured / metallic front plate , modules

erected with necessary connection. As desired by Engineer

Incharge. (3) Two Pin/RJ-11 Telephone Socket. [A] For One

55 (8) Modem Jack for Computer Open RJ-45 12.00 Ea. 181.80

56 (4) TV Co-axial Socket outlet. Cat.III 2.00 Ea. 151.50

57 (7) Blank Plate Single Cat -III 30.00 Nos 24.24

58 (19) Modular Indicating Call Bell Cat -III 10.00 Nos 151.50

59 (20) Modular Buzzer 1.00 Nos 149.48

(14) 6A/ 10A/ 16A/ 20A/ 25A/ 32A Double Pole Modular

Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to

be erected concealed in /flushed with wall/ceiling, with

61 sq. mm copper conductor FRLS PVC insulated stranded wire 300.00 mtr. 80.80

of green colour for earth continuity of following size. (a)

with medium class Rigid PVC pipe and accessories. (a)

wire 1.5 sq. mm

Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in existing pipe erected

with 2.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of

following size. (a) with medium class Rigid PVC pipe and

accessories. (a) 2 wire 4 sq. mm

Providing and erecting ISI mark Medium class RIGID PVC

PIPES of following size complete to be erected on/in wall or

ceiling erected with necessary PVC fittings & Junction boxes

fixed with adhesive solution & Clamps with following dia of

pipes, in approved manner as directed. (a) 20 mm

Providing and erecting ISI mark Medium class RIGID PVC

PIPES of following size complete to be erected on/in wall or

ceiling erected with necessary PVC fittings & Junction boxes

fixed with adhesive solution & Clamps with following dia of

pipes, in approved manner as directed. (b) 25 mm

Providing and erecting ISI mark Medium class RIGID PVC

PIPES of following size complete to be erected on/in wall or

ceiling erected with necessary PVC fittings & Junction boxes

fixed with adhesive solution & Clamps with following dia of

pipes, in approved manner as directed. (b) 32 mm

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE, PALITANA Dist-

No. Description Quantity Unit Rate Total Amount

No. Description Quantity Unit Rate Total Amount

Providing & erecting PVC Corrugated Flexible Conduit with

67 required nos. of coupling, PVC bushes, Check-nuts etc. 75.00 mtr 16.16

complete of following sizes. (1) 20 mm

Supplying & erecting UPVC Mini trunking (PVC Casing-n-

Capping) having double-locking arrangement with grooves,

trunking of size not below 12.5 mm in height as per IS with

accessories of PVC/Resin polypropylene not below 1.8 mm

thick duly sealed in joint & erected on wall / ceiling of

following size . (2) 25 mm

Supplying and laying UPVC cable trunking system

comprising unplasticised polyvinyl, chloride rigid material

with ignition free and flame proof confirming BS with

69 necessary end caps Internal and external bend, flat bends, 60.00 mtr 222.20

coupler, tee etc..All necessary accessories and measuring of

following sizes (3) 50 mm x 50 mm trunking

Providing & Erecting approved make following size of TV Co-

axial flexible cable comprising inner conductor of solid bare

copper insulated with Foam PE & Secondary conductor

made of poly - Aluminium film bonded Al. Braids @ suitable

coverage overall sheathed with black PVC insulation. (b)

Supplying & erecting approved make Telephone Cable

electrolytic copper conductor PE insulation twisted in two

pairs, & wrapped with FRLS PVC tape & sheathed with

FRLS PVC or HFFR outer Jacket suitable for telephone wiring

& confirming to C-DOT erected in existing pipe. of following

size of conductors & nos.of pairs. With necessary

connections. [A] Conductor Size 0.5 mm (a) Unarmoured

Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA polyester powder coated

and high U.V. & corrosion resistance with diffuser 120 to

300 V,Power Factor more than 0.9, THD < 10 %, CCT 3000 K

to 6500K, Uniformity ratio >0.7,

Luminaire efficacy> 85 lumens/watt , LED driver efficiency

> 85 % (A) Tube Light with integral/ non-integral driver (d)

20 Watts, Surge - 4KV,IP-20, 4 feet Cat-lll.

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE, PALITANA Dist-

No. Description Quantity Unit Rate Total Amount

No. Description Quantity Unit Rate Total Amount

Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA polyester powder coated

and high U.V. & corrosion resistance with diffuser 120 to

300 V,Power Factor more than 0.9, THD < 10 %, CCT 3000 K

73 to 6500K, Uniformity ratio >0.7, 42.00 Ea. 656.50

Luminaire efficacy> 85 lumens/watt , LED driver efficiency

> 85 % © Square/ Circular Surface/Recessed Mounted

Downlight with provision for spring loaded mounting clips

complete. (b) 12/13 watts, Surge-4 KV Cat-lll

Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA polyester powder coated

and high U.V. & corrosion resistance with diffuser 120 to

300 V,Power Factor more than 0.9, THD < 10 %, CCT 3000 K

to 6500K, Uniformity ratio >0.7, Luminaire efficacy>

lumens/watt , LED driver efficiency > 85 % © Square/

Circular Surface/Recessed Mounted Downlight with