WBPWD/EE/PED/NIQ11 /2025-2026

Amount

Supply of 1.1kv grade Al Armoured cable 4 C x 16 sq mm (Havells/Gloster/KEI).[NS]

Supply of 1.1kv grade Al Armoured cable 2 C x 6 sq mm (Havells/Gloster/KEI). [NS]

Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting. [ F-1/2(b)]

Supplying and fixing double door Horizontal TPN MCBDistribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment(D10/14)6 way Enclosure (607716). [D-10/14]

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. [D-9/13]

2+12way Enclosure (607712) DHDPSNODRW12)(Legrand/Havells)

Supplying and fixing compression type gland complete with brassgland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below2c 6sq mm. [F-4/7(a)]

4core 16sq mm. [F-4/7(a)]

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials

2 Core 6sq mm. [F-5/8(b)(ii)]

4 Core 16 sq mm [F-5/8(b)(xii)]

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board on wall complete with 2 no. “Ph & N” copper bar incl. bakelite/ Perspex top cover 3 mm thick and incl. 175x100x65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish [only PVC Rigid Conduit on ceiling and remaining portion concealed] Avg run 8 mtr [E-15/5(c)]

On board [E-15/4(a)]

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm). [E-14/1(a)(ii)]

2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC. [E-14/1(a)(iii)]

2 x 84/0.3 (6 sqmm) + 1 x 56/0.3 (4 sqmm) ECC. [E-14/1(a)(iv)]

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. 1.5 sq mm [F-5/9]

2.5sq mm [F-5/9]

4 sq mm [F-5/9]

6 sq mm [F-5/9]

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection. 40A DP (Legrand/Schneider/Havells) [F-5/9]

63A FP (Legrand/Schneider/Havells) [F-5/9]

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection. SP(6- 32A)(havells/Legrand/Schneider). [D-6/7]

Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch, indicator & 20A switch type SP MCB (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. [E-7/26]

Supply & Fixing 240 V, 3 nos. 20A plug socket with separate 3 nos. 20A Piano key type switch, indicator & 16A kit-kat flush type fuse (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 300x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. [E-7/29]

Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [E-19/17]

S&F 15W led bulb with holder(Make-Philips/Havells)with 3 years warranty. [NS]

. Make Havells Regal batten T8 upto 2x22 W SSBSWTT with 2nos Photon ultra plus 20W/ Bajaj BLRB-DB-218 with 2nos BLRB 21W Tube with Al heat sink/ Magic copper KCCF0400 with 2 nos prism pro T8 LED Tube) with 3 years warranty. [NS]

Make Havells Regal batten T8 upto 1x22 W SSBSWTT with 1 no Photon ultra plus 20W/ Bajaj BLRB-DB-118 with 1 no BLRB 21W Tube with Al heat sink/ Magic copper KCCF0200 with 1 no prism pro T8 LED Tube) with 3 years warranty. [NS]

Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. [C-2/17]

Supply of 48'' (1200mm) ceiling fan cmplete with all accessories (Make- Orient new breeze /equivalent make of CG/Usha with 3 years warranty. [NS]

Fixing only 1200mm(48") ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. making necessary disconnection and connection as required. [C-3/21(a)]

Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. [C-2/16]

Supply of sweep AC exhaust . (EPC heavy duty) 1420 r.p.m. 9 '' Exhaust Fan. [NS]

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter.23cm(9"). [C-3/28(a)]

Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) 23cm Ex fan(9"). [D-14/32(a)]

Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc. [E-6/18(a)]

Supply & Fixing of highly efficient 240v min 100W outdoor led street light with driver inside a PDC housing whichi) Fixture & Driver should be same make and BIS approved.Minimum efficiency 110L/W protection IP65 or higher(Make-Crompton,cat no-CRP-411-100-57-SL-GL-NSG/Philips/Bajaj,Cat no-ZELA P120L WHPOTG SD)(Warranty-Three years). [NS]

S&f GI Looping cable box with 4 stud connector with proper insulation,including S&F necessary arrangement like nut,bolt & washer etc. [H-5/(H)(5)]

S&F of 32/40 mm. dia.(as required) 1.5 Mts. long G.I. pipe (medium) arm bracket grouted by 4 nos. 5” long GI nut bolt & 2 nos. “U” clamp arrangement on wall. [NS]

Supply & Delivery of high wall Inverter split air conditioner having the following general specification -3star or higher /2022-23 as per BEE/BIS 2. IS compliance-IS 1391 with its latest ammendment. 3.Refrigerant- R410/R32 4.Compressor- Rotary/Scroll. 5.Evaporator & Condensor coil: Copper , 6. Operating outdoor temperature = 50*C and above. 7.Control system: The machine should be equipped with all the requisite control system for the total system /temperature/Air Distribution/Electrical power system and other like remote sensing device etc.8. Power supply-240V 50HZ(Tollerance as per applicable standard) 9.Power consumption-As per BEE Norms.10.ISSER-As per latest recommendation of BEE.11.Thr air Conditioner should have the following capacity. Approved make Mitsubishi Electric / O-General /Daikin/Hitachi. [NS]

2 ton or Higher [NS]

1Ton or Higher [NS]

The scope of work also includes supply of the following and others to be supplied with the machines.i)necessary refrigeration copper pipe(5/8'' & 1/4'' with 0.8 mm thick)with nitrile rubber insulation -3mtr.ii)nrcessary copper cable /cord(FRLS type- make:Finolex/Havells/Polycab/RR Kable/Gloster)-3mtr

S&F of additional following items for length exceeding 3 mtr for complete installation and commissioning of above AC Machines.

1.Supply & Fixing of extra refrigerant copper pipes of requisite diameter for 1 Ton/2Ton with nitrile rubber insulation of requisite thickness as per direction of E-in-charge. [NS]

3.supply & Fixing of 3 core PVC insulated FRLS grade copper cable (make-Finolex/Havells/polycab/RR Kable/Gloster) or requisite diameter for the above Air- Conditioner As per direction of Engoneer-in-Charge. [NS]

Supply& Fixing of PVC drain pipe or requisite size(approx 25mm dia) as per direction of Engineer-in-charge. [NS]

Installation,Testing & Commissioning of Indoor & Outdoor unit of above high wall split AC machine after making hole in wall etc as per direction of EIC including S&F of necessary fixing arrangement for indoor and outdoor unit,duly painted ,laying and makeing connection of refrigeration pipe ,power cable,drain pipe wtc including supplying & charging the extra refrigerant as required as per direction of the EIC.Approved make Mitsubishi Electric / O-General /Daikin/Hitachi. [NS]

Excavation of soil for installation of Earth Electrode and filling & ramming.For Morrum Soil. [G-1/1(b)]

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground. By TATA-Medium GI pipe [G-1/2(a)]

Supplying & Fixing CRC sheet metal (16 SWG) JB-cum- Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. bakelite/Perspex/coloured Perspex (wall matching colour) top cover 3 mm thick flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works.175 mm x 100 mm x 65 mm [E-3/10(b)]

SAMPA ELECTRICALS (BID ID -7409517)

SAIBAL SARKAR (BID ID -7404657)

RASH ELECTRICAL WORKS (BID ID -7438045)