10715-22 dated 24/01/2026

Excavation in foundation, trenches etcetera in all classification of soil such as pick work, jumper work, blasting work soft rock and hard rock including chiselling wedging and any other mixed variety in dry and all saturated conditions upto any depth and lift including pumping and bailing out water where required including stacking the serviceable and unserviceable materials separately as directed and then returning the stacked soil in fifteen centimeters layers when required into plinth and sides of foundation etcetera consolidating each deposited layer by ramming and watering and then disposing of all surplus un-serviceable excavated earth within all leads and lifts as per directed by the Engineer-in-Charge including entire carriage of material within all leads and lifts, disposed materials to be neatly dressed and levelled including other incidentals. The rates are inclusive of royality, GST and all other taxes imposed by the Government.

Providing and laying in position cement concrete 1:5:10 (one cement : five coarse sand): ten graded stone aggregate 40 mm ( forty millimetre ) nominal size of specified grade) excluding the cost of centering and shuttering and curing complets including entire carriage of material within all leads and lifts, disposed materials to be neatly dressed and levelled including other incidentals. The rates are inclusive of royality, GST and all other taxes imposed by the Government.

Providing form work with mild steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron in frame of 30x30x5mm (Thirty into thirty into five millimetre) size so as to give a fair finish including centring, shuttering, strutting and propping and centring etc etera with wooden battens and ballies in all heights of propping and centring below supporting floor to ceiling not exceeding 4 (four) meters and removal of the same for insitu-reinforced concrete and plain concrete work upto all floor level in all heights including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

In beams, cantilevers, girders and lintels, sides and soffits of beams, beams haunching cantilevers bressumers and lintels in all depth /height not exceeding 1 (one) metre depths upto all floor levels

Providing and fixing 1:1.5:3 (One cement : one and half coarse sand : three graded stone aggregate 20mm(twenty millimetre) nominal size) up to floor five level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, etc., including hoisting and setting in position with cement mortar 1:3 (one Cement : three coarse sand)including cost of required Centering complete including entire carriage of materials within all leads and lifts and other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Steel work welded in built up sections,, made of TATA, SAIL,in trusses and framed work including cutting hoisting, fixing in position using structural steel etc. as required in Grating frames, guard bar, ladder railing, brackets, gates and similar work. and applying a priming coat of approved steel primer all complete. including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and fixing 0.60mm(zero point six zero millimeters) thick prepainted steel sheet sand-wich puff roofing, TATA/ SAIL/ JSW made of cold rolled steel coil with epoxy coating of 25(twenty five) micron having a puff depth of 50mm (fifity millimetres) and weight of puff should be 35-37 (thirty five -thirty seven) kg per cu.m. steel frames are to be painted of approved shade and gap between wall and the roof at the base point to be closed with autoclaved cellular aerated blocks and to be plastered from both sides (cost of autoclaved cellular aerated blocks and to be paid for separately), i/c fixing the sheets with self drilling and self tapping galvanised or zinc alloy coated fasteners of size 5.5mm (five point five millimetres) Dia and 55mm (fifty five millimitres) length with EPDM seal. Test certificate and 40 (forty) years warranty against color fading and manufacturing defects including carriage of materials within all leads and lifts and other incidentials charges. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing prepainted ridges or hips 90 cm (Ninety centimeter) TATA/ SAIL/ JSW overall with 0.60 mm (Zero point six zero millimeter) thick preprinted steel sheets in roofing with hot dipped metallic zinc coated sheets with top coat or regular modified polyester organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating + back coat of polyester of 5 (Five) microns over 5 (Five) microns primer coating including fixing with preprinted iron J or L hooks, bolts & nuts 6mm(Six) millimeter dia and preprinted G.I. limpet and bitumen washers complete with all accessories as required including carriage of materials within all leads and lifts and other incidentials charges. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing valleys 60cm (Sixty centimetres) (overall 0.60mm (Zero point six zero millimetres) thick prepainted steel sheet TATA/ SAIL/ JSW Make in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with serews prepainted iron J or L hooks bolts and nuts 6mm (Six millimetres) dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required in all heights upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. he rates are inclusive of royality, GST or other taxes imposed by the Government.