Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹40.2 L
EMD Value
₹80,300
Closing Date
2 Nov 2026, 3:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
Above/Below/Par
ELECTRICAL
50 conditions · 21 needing a document upload
Please submit your Bank details such as Name of the - Bank along with Bank Branch code, account No., IFSC Code and PAN Number as per the format given in attached tender document.
I/We have carefully gone through the Clause no 10 to 18 of GCC- APRIL,2022 and understood that non-compliance of requirement of these clause and non submission of required documents in compliance, my/our offer will be rejected.
Submission of necessary certificate/declaration regarding notblacklisted/debarred as applicable for respective type of bidding firm, asmentioned under respective clauses from 10 to 18 of GCC-APRIL,2022.
Please furnish list of plant and Machinery available on hand and proposed to be inducted. Own and hired to be given separately for the subject work.
Please furnish list of personal, organization available on hand and proposed to be engaged for the subject work.
Please furnish list of Works on hand indicating description of Work, contract value, approximate value of balance work yet to be done and contract No. and date of award, awarding unit name & address etc.
Please furnish list of Works completed in last seven financial years giving description of work, orqanization for whom executed, approximate value of contract at time of award, date of award and date of completion. Date of actual. start, actual completion and final value of contract shall also, be given.
Generally deviations of contractor against the Railways speciflcation & special conditions stipulated in the entire tender booklet are not acceptable. Therefore, tenderers are advised not to quote any deviation against the Railways conditions & specification stipulated in tender' document. However, deviation if any should be evaluated in financial term and rate quoted accordingly i.e. deviations should be considered into rates.
Tender should submit documents related to Registration details, GSTIN No., registered address, email ID etc.
No octroi duty is payable. However if desired, a certificate stating that the hired Vehicle is requited for Railways own use shall be issued.
The tender document form is issued free of cost to all tenderers and Bid Security as indicated in the NIT header shall be paid through online' gateway/E-Payment facility provided on IREPS website only, Other mode of payment towards Bid Security will not be accepted. In case payment of Bid Security is not successful during E-payment, the offer will be summarily rejected.
Note: (i) Any firm recognized by Department of Industrial Policy and Promotion (DIPP) as 'Startups' shall be exempted from payment of Bid Security detailed above.
NOTE (ii) Labour Cooperative Societies shall submit only 50% of above Bid Security detailed above
JVs/Consortiums/MOU s will not be considered.
GCC Clause 14: Documents to be Submitted Along with Tender : (i)The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be. (ii)Following documents shall be submitted by the tenderer: (a) Sole Proprietorship Firm: (i) All documents in terms of Para 10 of the Tender Form (Second Sheet) above. (b) HUF: (i) A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii) All other documents in terms of Para 10 of the Tender Form (Second Sheet) above.(c) Partnership Firm: (i) All documents as mentioned in para18 of the Tender Form (Second Sheet). (d) Joint Venture (JV): All documents as mentioned in para 17 of the Tender Form (Second Sheet).(e) Company registered under Companies Act-2013: (i)The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii) A copy of Certificate of Incorporation (iii)A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv) All other documents in terms Para 10 of the Tender Form (Second Sheet) above.
(f)LLP (Limited Liability Partnership): If the tender is submitted on behalf of a LLP registered under LLP Act-2008, the tenderer shall submit along with the tender: (i)A copy of LLP Agreement (ii)A copy of Certificate of Incorporation (iii)A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iv) An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract.(v) All other documents in terms of explanatory notes in clause 10 above. (g) Registered Society & Registered Trust: (i) A copy of the Certificate of Registration (ii) A copy of Memorandum of Association of Society/Trust Deed(iii) A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust. (iv)A copy of Rules & Regulations of the Society(iv) All other documents in terms of Para 10 of the Tender Form (Second Sheet) above.(iii) If it is NOT mentioned in the submitted tender that tender is being submitted on behalf of a Sole Proprietorship firm / Partnership firm / Joint Venture / Registered Company etc., then the tender shall be treated as having been submitted by the individual who has signed the tender. (iv) After opening of the tender, any document pertaining to the constitution of Sole Proprietorship Firm / Partnership Firm / Registered Company/ Registered Trust / Registered Society / HUF/LLP etc. shall be neither asked nor considered, if submitted. Further, no suo moto cognizance of any document available in public domain (i.e., on internet etc.) or in Railway's record/office files etc. will be taken for consideration of the tender, if no such mention is available in tender offer submitted. (v)A tender from JV / Partnership firm etc. shall be considered only where permissible as per the tender conditions. (vi) The Railway will not be bound by any change of power of attorney or in the composition of the firm made subsequent to the submission of tender. Railway may, however, recognize such power of attorney and changes after obtaining proper legal advice, the cost of which will be chargeable to the Contractor.
GCC Clause No.15:- The tenderer whether sole proprietor / a company or a partnership firm / joint venture (JV) / registered society / registered trust / HUF / LLP etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and further to deal with the Tender/ Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding / Article of Association/Board 13.1.1 resolution, failing which tender shall be summarily rejected.A separate power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, shall be submitted after award of work, specifically authorizing him/them to deal with all other contractual activities subsequent to signing of agreement, if required.Note: A Power of Attorney executed and issued overseas, the document will also have to be legalized by the Indian Embassy and notarized in the jurisdiction where the Power of Attorney is being issued. However, the Power of Attorney provided by Bidders from countries that have signed the Hague Legislation Convention 1961 are not required to be legalized by the Indian Embassy if it carries a conforming Appostille certificate.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The Bid Security shall be deposited either in cash through epayment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents. The Bank Guarantee bond shall be as per Annexure- VIA and shall be valid for a period of 90 days beyond the bid validity period. E-Tender Forms shall be issued free of cost to all tenderers.
The Bid Security deposited by the Contractor with his tender if applicable will be retained by the Railways as part of security deposit for the due and faithful fulfillment of the contract by the Contractor. The Security Deposit shall be 5% of the contract value. The Bid Security submitted by the Contractor with his tender will be retained/encashed by the Railways as part of security for the due and faithful fulfillment of the contract by the Contractor. Provided further that, if Contractor submits the Cash or Term Deposit Receipt issued from a Scheduled commercial bank of India or irrevocable Bank Guarantee Bond from a Scheduled commercial bank of India, either towards the Full Security Depositor the Part Security Deposit equal to or more than Bid Security, the Railway shall return the Bid Security, to the Contractor.Balance of Security Deposit may be deposited by the Contractor in cash or Term Deposit Receipt issued from Scheduled commercial bank of India or irrevocable Bank Guarantee bond issued from Scheduled commercial bank of India, or may be recovered at the rate of 6% of the bill amount till the full Security Deposit is recovered. Provided also that in case of defaulting Contractor, the Railway may retain any amount due for payment to the Contractor on the pending "on account bills" so that the amounts so retained (including amount guaranteed through Performance Guarantee) may not exceed 10% of the total value of the contract.The Irrevocable Bank Guarantee submitted towards Security deposit shall be initially valid up to the stipulated date of Maintenance period plus 60 days and shall be extended from time to time, depending upon extension of contract granted in terms of Clause 17A and 17B of the Standard General Conditions of Contract.Note: Security Deposit deposited in cash by the Contractor or recovered from the running bills of a Contractor or submitted by contractor as Term Deposit Receipt(s) can be refunded/returned to the contractor, in lieu of irrevocable Bank Guarantee bond issued from scheduled commercial bank of India, to be submitted by him, for an amount equal to or more than the already available Security Deposit, provided however that, in a contract of value less than Rs. 50 Crore, such refund/ return of the already available Security Deposit is permitted up to two times and in a contract of value equal to or more than Rs. 50 Crore, such refund / return of the already available Security Deposit is permitted up to three times.
Rates are inclusive of all taxes, duties, labour, freight; material, insurance etc.No.extrapayment will be made on this account. Railway may deduct any taxes being levied by the Government from No time to time or in force from time to time. Tenderer may consider this aspect while quoting for the work.
Performance Guarantee: The procedure for obtaining Performance Guarantee is outlined below:-(a)The successful bidder shall have to submit a Performance Guarantee (PG) within 21 (Twenty one) days from the date of issue of Letter of Acceptance (LOA). Extension of time for submission of PG beyond 21 (Twenty one) days and upto 60 days from the date of issue of LOA may be given by the Authority who is competent to sign the contract agreement. However, a penal interest of 12% per annum shall be charged for the delay beyond 21(Twenty one) days, i.e. from 22ndday after the date of issue of LOA. Further, if the 60thday happens to be a declared holiday in the concerned office of the Railway, submission of PG can be accepted on the next working day.In all other cases, if the Contractor fails to submit the requisite PG even after 60 days from the date of issue of LOA, the contract is liable to be terminated. In case contract is terminated railway shall be entitled to forfeit Bid Security and other dues payable to the contractor against that particular contract, subject to maximum of PG amount. In case a tenderer has not submitted Bid Security on the strength of their registration as a Startup recognized by Department of Industrial Policy and Promotion (DIPP) under Ministry of Commerce and Industry, DIPP shall be informed to this effect. The failed Contractor shall be debarred from participating in re-tender for that work.
The successful bidder shall submit the Performance Guarantee (PG) in any of the following forms, If a tender is accepted on the quoted rates of bidder which is below the advertise tender value , An additional performance security shall be submitted by the bidder as below :- Additional performance guarantee is Nil for Bid quoted in % of advertised cost -Below 0- 5 % ( Inclusive ) And Additional performance guarantee is 5% for Bid quoted in % of advertised cost -Below 5 % ( Inclusive ). (i)A Deposit of cash; (ii)Irrevocable Bank Guarantee; (iii)Insurance surety bond as per Annexure- XVII. Note : In case of extension of date of completion selected bidder need to submit extended insurance surety Bond /fresh insurance surety Bond/performance security in any form as given above, before expiry of existing insurance surety Bond (iv) Government Securities including State Loan Bonds at 5% below the market value. (v) Pay Orders and Demand Drafts tendered by any Scheduled Commercial Bank of India. (vi ) Guarantee Bonds executed or Deposits Receipts tendered by any Scheduled Commercial Bank of India. (vii) Deposit in the Post Office Saving Bank. (viii) Deposit in the National Savings Certificates. (ix) Twelve years National Defence Certificates. (x) Ten years Defence Deposits. (xi) National Defence Bonds and (xii) Unit Trust Certificates at 5% below market value or at the face value whichever is less. Also, FDR in favour of FA&CAO (free from any encumbrance) may be accepted.
(c)The Performance Guarantee shall be submitted by the successful bidder after the Letter of Acceptance (LOA) has been issued, but before signing of the contract agreement. This P.G. shall be initially valid upto the stipulated date of completion plus 60 days beyond that. In case, the time for completion of work gets extended, the Contractor shall get the validity of P.G. extended to cover such extended time for completion of work plus 60 days.
(d)The value of PG to be submitted by the Contractor is based on original contract value and shall not change due to subsequent variation(s) in the original contract value.
(e)The Performance Guarantee (PG) shall be released after physical completion of the work based on 'Completion Certificate' issued by the competent authority stating that the Contractor has completed the work in all respects satisfactorily.
(f)Whenever the contract is rescinded, the Performance Guarantee already submitted for the contract shall be encashed.
(g)The Engineer shall not make a claim under the Performance Guarantee except for amounts to which the President of India is entitled under the contract (not withstanding and/or without prejudice to any other provisions in the contract agreement) in the event of:-(i)Failure by the Contractor to extend the validity of the Performance Guarantee as described herein above, in which event the Engineer may claim the full amount of the Performance Guarantee.(ii)Failure by the Contractor to pay President of India any amount due, either as agreed by the Contractor or determined under any of the Clauses/Conditions of the Agreement, within 30 days of the service of notice to this effect by Engineer.(iii)The Contract being determined or rescinded under clause 62 of these conditions.
Tenderer shall upload the documents in PDF format only.
The Railway administration reserve the right to reject any tender either in whole or in part without assigning any reason whatsoever. The final acceptance of the tender shall rest with the competent authority of Railway whd reserve. the right to accept or reject any tender without assigning any reason thereof and does not bind himself to accept the lowest tender only.
Estimated rates are all inclusive and rate to be quoted should be all inclusive. Before submitting a tender, the tenderer will be deemed to have satisfied himself by actual inspection of the site and the locality of the work, that all conditions liable to be encountered during the execution of the works are taken in to account that the rates he enters in the tender form are adequate and all inclusive accord with the provision in Clause- 37 of the standard general conditions of contract for the completion of the works to the entire satisfication of the Engineer.
Electrical/G work for :- Renovation work of Track machine depot at Jhansi west.
JHS-ELG-W-T-04-2026-27-RT~NCR
JHS-ELG-W-T-04-2026-27-RT
Open
Works - General
6 Months
Jhansi, Uttar Pradesh
₹0
₹80,300
9 Oct 2026
9 Oct 2026
19 Oct 2026
27 items across 1 schedule · ₹40,16,857 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Design, supply, erection, testing and commissioning of 500 KVA 11KV /0.433 KV, 3 Phase copper wound.oil immersed Out Door type, Energy efficient (level -3) Distribution Transformer (EEL3 New defined) As per amendment -4 or latest existing transformer to be removed and new transformer to be installed as advised by Railway Site engineer. | Numbers | 1.00 | 16,10,285 | 16,10,285 |
| 2 | Design, manufacture, supply, erection, testing & commissioning of LT switch gear panel board of 2 mm thick dia pressed CRC steel sheet panel shall be treated for anti corrosion treatment and finished with smoke gray paint. Fabrication works and insulated Aluminum bus bars of 1200 A capacity for phases & 1200 A capacity for neutral Bus bar shall be suitably insulated with heat shrinkable sleeves/ epoxy coating/insulating tap to withstand the test voltage of 2.5 KV Copper strip for connection outgoing as well as incoming with suitable size be provided. ( Panel no.1 ) Item no.3 to 8 will be part of this item. | Numbers | 1.00 | 58,350 | 58,350 |
| 3 | "ACB of 800 A, 36 kA Standard breaking capacity, 415 volt, 3 Phase 4 Pole current rating 800 Amp as per IS-60947:2 or latest. " | Numbers | 3.00 | 1,45,377 | 4,36,131 |
| 4 | "MCCB of 400 A, 36 kA Standard breaking capacity, 415 volt, 3 Phase 4 Pole current rating 400 Amp as per IS-60947:2 or latest. " | Numbers | 2.00 | 18,143 | 36,286 |
| 5 | MCCB of 250 A, 36 kA Standard breaking capacity, 415 volt, 3 Phase 4 Pole current rating 250 Amp as per IS-60947:2 or latest. | Numbers | 4.00 | 13,064 | 52,256 |
| 6 | "MCCB of 125 A, 36 kA Standard breaking capacity, 415 volt, 3 Phase 4 Pole current rating 125 Amp as per IS-60947:2 or latest. " | Numbers | 4.00 | 8,383 | 33,532 |
| 7 | "Supply, fixing, testing, connecting and commissioning of Outgoing/Feeder Panel Mounted Multi-function meter with Accuracy Class 1 as per IEC 62053-21 or Class 0.5,0.5S as per IEC 62053-22.LED meter Cl 1 with RS485: Meter should have following features built-in LED • Flush mounting 96 x 96 mm • True RMS measurement • Password protection provision for security • Site selectable for 3 Phase 4 wire, 3 Phase 3 wire, 1 Phase, CT Secondary 1A/5A, Universal Auxiliary Supply 80-300 VAC/DC, Input Voltage Measurement 50-500 VAC, • 64 samples/ cycle The Meter should be able to read/display following parameters Instantaneous Parameters (V1,V2, V3, V12, V23, V31, Avg (VLN, VLL), A1, A2, A3, Aavg, F, PF-1, PF-2, PF-3, PF (Avg) W1, W2, W3, W (total) VA1, VA2, VA3, VA (total) Cumulative Parameters Energy Wh, Import Wh, Import Vah, Import load hours, Reset (old) Cumulative parameters Import Wh, Import load hours, Communication (RS485 Modus RTU).complete with all accessories. " | Numbers | 2.00 | 3,264 | 6,528 |
| 8 | LED Indication lamps with suitable holder. | Numbers | 6.00 | 103 | 618 |
| 9 | "Replacement & of Supply,testing , erection &commissioning of LT panelspanels (with bifurcation ofEssential & Non essential load)indoor type made out of16SWG CRCA sheet steel ,freefloor standing with MS Channel, vermin and dust proof withSiemens gray powder coatedpaint with cable alleys, locking arrangements, suitable copperbusbars & all accessories asper specification comprising of400A FP On load Change overswitch -1 No. Incommer:400AFP adjustable Mangetic andadjustable thermal settingMCCB 35 KA- 2 Nos.,Outgoings:200A FP adjustablemangeticsetting and adjustablethermal setting MCCB 25 KA -2 Nos ,100A FP fixed angeticsetting and adjustable thermalsetting MCCB 25KA -3 Nos.63A fixed thermal and fixedmagnetic setting FP MCCB25KA - 5 Nos,Multi data meter- 2 Nos ,CT's 400/5, CL-0.5,15VA 3Nos., RYB indicationlamp (LED type) -2Setincluding all heat shrinkeablesleeves,flexible Cu wires,lugs,sleeves, terminals & PVCtroughs as per site condition. *In all outgoing feeder,provisionto be made for fixing of digitalKWh meter & related CT's(Tobe provided in future)" | Numbers | 1.00 | 1,75,379 | 1,75,379 |
| 10 | "MCCB of 400 A, 36 kA Standard breaking capacity, 415 volt, 3 Phase 4 Pole current rating 400 Amp as per IS-60947:2 or latest. " | Numbers | 3.00 | 18,213 | 54,639 |
| 11 | MCCB of 250 A, 36 kA Standard breaking capacity, 415 volt, 3 Phase 4 Pole current rating 250 Amp as per IS-60947:2 or latest. | Numbers | 5.00 | 13,064 | 65,320 |
| 12 | "MCCB of 125 A, 36 kA Standard breaking capacity, 415 volt, 3 Phase 4 Pole current rating 125 Amp as per IS-60947:2 or latest. " | Numbers | 8.00 | 8,383 | 67,064 |
| 13 | Supply, erection, connection and testing of 11 KV standard Air break GO switch 200 Amp with 03 nos. insulator rocking type 11 KV complete with fixing brackets and operating handle and other accessories and locking arrangement. Make of insulator of GO switch-ABI/MIL/IEC/Raychem or similar. | Numbers | 2.00 | 16,455 | 32,910 |
| 14 | Supply, erection, connection and testing of 11 KV DO fuse unit 200 Amp capacity channel type complete with necessary fixing brackets and other arrangement. Make of insulator of DO fuse unit -ABI/MIL/IEC/Raychem or similar. | Numbers | 2.00 | 10,178 | 20,356 |
| 15 | Supply and erection of 3 Nos station class - 1 Zinc oxide Lightening arrestor suitable for 3 wire 11 KV OH with rated voltage 9 KV (RMS) with normal discharge current rating of 10 KA and complete with galvanized clamping arrangement, GI bolts, nuts, washer as required conforming to IS 3070-III-1993. Make- OBLUM/Lamco/Raychem/Elpro/Toshiba or similar. | Numbers | 1.00 | 20,134 | 20,134 |
| 16 | "Supply and laying of HDPE Pipes (Upto PN 8.0 Pressure Rating Material Grade: PE 63, Pressure Rating: PN 8.0,Nominal Dia (mm): 110) as per IS- 4984:2016 suitable for HT/LT XLPE cable & as required and as per relevant technical specification. " | Metre | 500.00 | 321 | 1,60,500 |
| 17 | "Supply, Installation, Testing & Commissioning of End termination of 3 core 150 Sqmm. HT XLPE insulated 11 KV (E) grade AL cable with cold shrinkable indoor type cable box of approved make conforming to relevant IS (Latest version) with supply of material including testing and commissioning of size 150 sq.mm cable make- M seal/Denison or Similar. " | Numbers | 4.00 | 4,730 | 18,920 |
| 18 | Excavation of cable trench in soft morrum plain ground concrete/pucca surface etc and back filling of cable for laying of HT/LT cables including placing of bricks incross position etc. | Metre | 500.00 | 90 | 45,000 |
| 19 | Laying/Cleating of LTcable 03/04 core on wallwith all accessories Cable will be supplied byRly. Free of cost atconsignee depot). | Metre | 650.00 | 40 | 26,000 |
| 20 | "Supply, Erection, testing andcommissioning of Aircirculating fan 600mm sweep single phase 50 HZ AC 230 V, heavy dutyoscillation type propeller fan available with impeller consisting of 03 blades column mounting connecting fromsealing rose/ bus barby 2.5 sq mm multi- strands coppe rwire [HR-FR-LSH-LF] through PVC flexible pipe (asper IS2997/1964 or latest). | Numbers | 25.00 | 6,829 | 1,70,725 |
| 21 | Supply, erection, testing and commissioning of sub main of 2x6 Sq.mm PVC insulated sheathed copper wire, multi strands, 1100 volts grade, continues PVC insulated sheathed copper earth wire of 1.5 sq mm, through PVC heavy duty conduit pipe/ PVC Channel complete with all other accessories required as per site and removal of existing wiring of sub main if required. | Metre | 500.00 | 99 | 49,500 |
| 22 | Supply, erection, testing and commissioning of double door type metal clad 12 way SDB with 1x63Amps. MCB Isolator 04 pole, 4x20/25 Amps. MCB SP, 4x10/16Amps. MCB SP with all otheraccessories required as per site. | Numbers | 5.00 | 7,811 | 39,055 |
| 23 | Supply, erection, testing andcommissioning of 2x18 WattsLED fitting with complete withconnection and necessaryfixing arrangement. (IP-66 covered) | Numbers | 50.00 | 1,588 | 79,400 |
| 24 | Supply, fixing, installation &commissioning of weather proof LED flood light luminaire complete150 watt, IP ratings 65 system efficiency (Im/W) 100, color temp(K) 5700, CRI 70, Housing LM-6 high pressure die cast aluminium, cover glass mounting wall/bracket,THD<20% Pf>0.95, operating voltage 140-270 V AC 50 Hz . | Numbers | 25.00 | 8,497 | 2,12,425 |
| 25 | Supply, erection, testing and commissioning of maintenance free earthing complete with all accessoriesas per technical specification shown in Annexure attached. | Numbers | 12.00 | 8,572 | 1,02,864 |
| 26 | Supply, erection, connection, testing and commissioning of outdoor type LT panel comprising of following with supply of all items: 1x100A TPN 16kA MCCB, as incoming & 2x63A TPN MCB + 2X32A TPN MCB as outgoing, 200/5A, 3 Nos. C.T, Digital meter showing A,V, PF, etc. 3 phase line indicating lamps, digital timer, adequate capacity KWH Electronic meter as per technical specifications attached. | Numbers | 4.00 | 25,670 | 1,02,680 |
| 27 | "Supply of 150 sq mm Three-core armored, screened Xlpe Cables Al conductor For Working Voltages From 3.3 Kv Up To And Including 33 Kv, Outer sheath (Type ST2) PVC ,Galvanized formed wires armored, Earthed systems: 6.35/11 kV, IS:7098-Part 2:2011 latest , Availability of Type test report from Central government/NABL/ILAC accredited laboratory to prove conformity to the specification. | Metre | 200.00 | 1,700 | 3,40,000 |
| Schedule total | ₹40,16,857 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCC_April-2022.pdf
ATTACHMENT
CorrectionslipsGCC2022.pdf
ATTACHMENT
AmdmntNew.pdf
ATTACHMENT
AnnexureVNEW.pdf
ATTACHMENT
AnnexureVA.pdf
ATTACHMENT
AnnexureB.pdf
ATTACHMENT
AnnexureC.pdf
ATTACHMENT
mfreeearthspec.pdf
ATTACHMENT
IS1180Part12014_TOAZ.INFO.pdf IS for transformer
ATTACHMENT
IS1180Part12014_TOAZ.INFO.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .