Selection of System Integrator for Supply Installation Testing commissioning SITC and maintenance of eHealth project by providing Network active passive components Structured cabling UPS wiring and Supply of UPS

Amount

Structured Networking

Outdoor O. F. Cable 6 Core SM

6 Port Fully loaded LIU Rack mountable

LC to SC Patch cord. SM

Cat6 4 Pair UTP Cable: 23 AWG

Cat 6 STP Out door Cable

Cat6 Information outlet

Face plate Singlex.- Cat6

3 x 3 Surface mount box for Cat6 Outlet

Cat6 patch cord - 3 mtr

Cat6 patch cord - 1 mtr

Cat6 patch panel 24 port Fully Loaded

9U Wallmount Rack with Accessories

Supply of Cable Route Marker with Angle Iron Leg 2 ft with painting

Supply of 25mm ISI PVC Conduit- Ivory

Supply of 32 mm HDPE Pipe

1.5"/ 2" GI Pipe ISI Approved

Router with 2x GE Enabled WAN (1000/100/10 Base T) with 2 RJ 45 with all acessories with 5 year 24X7 support

Fully Managed 24 Port Network Switch with minimum 4* 1/10G SFP+ Uplink with 5 year 24X7 support pack

Wireless-N Access Point with 5 year 24X7 support pack

Power Injector for AP

1G SFP Module for Access Switches (SM)

Laying of OF Cable through PVC Conduit/ HDPE Pipe

Splicing of OFC

Termination of LIU

Laying of 4 Pair UTP Cable Cat6 /STP

Fixing and termination of Information outlet with SMB- Cat6

Fixing and port termination of patch panel- Cat 6

Fixing & Dressing of wallmount Rack

Laying of 25 MM PVC Conduit

Laying charge for GI Pipe

Fixing of Access point

Digging, Laying of HDPE/Water Pipe in Hard Soil / Tar-Road / Concrete Excavation/Trenching, Baked-Brick- Layering, Refilling & Restoration/Resurfacing, upto 600mm depth.(For laying of UTP/OFC)

Fixing of Cable Route Marker

Supply and Installation of Uninterrupted Power Supply

UPS with 60mnts Backup - 2KVA

UPS with 60mnts Backup - 3KVA

UPS with 60mnts Backup - 5KVA

UPS with 60mnts Backup - 10KVA

Electrical cabling for UPS Supply of the following 1100V, Aluminium Cable, XLPE / AYFY in the existing cable trenches/cable trays / pipes/ etc. including supply and fixing of necessary clamping materials.

2 X 16 Sq.mm , 415 V

4 X 16 Sq.mm , 415 V

Electrical cabling for UPS Supply of all materials for termination of the following PVC insulated Armoured Aluminium LT cables (AYFY/A2XFY) using single compression type cadmium plated brass cable glands , Copper crimped type cable lugs, cable identification tags and including gland earthing using copper conductor of adequate size,Al-Cu strip for termination of cables etc.

2 X 16 Sq.mm , 415 V

4 X 16 Sq.mm , 415 V

Supply of 4 way double door TPN VDB

Supply of 3 Pole Enclosure

Supply of 2 Pole Enclosure

Supply of 12 way SP DB

Supply of 8 way SP DB

Supply of 4 way SP DB

Supply of 2 Pole Isolator 40A

Supply of 2 Pole ELCB 40A 100ma Leakage

Supply of 2 Pole MCB 40A

Supply of 1 Pole MCB 32A

Supply of 1 Pole MCB 16A

Supply of 1 Pole MCB 6A

Supply of 1 nos of 4 sq mm PVC insulated Copper Wire

Supply of 2 nos of 2.5 sq mm and 1 nos of 1.5 sq mm PVC insulated Copper Wire

Supply of 2 X 10 SWG Bare Copper

Supply of 3 nos 6A socket controlled by 3 switch

Supply of 2 nos of 6A socket controlled by 2 switch

Supply of 1 nos of 6A socket controlled by 1 switch

Supply of 1 nos of 16A socket controlled by 1 switch

Supply of 20 mm PVC Conduit accessories

Supply of Exhaust Fan - 12"

Supply of All materials for Plate(Galvanised Iron) Earthing as per IS-3043-1987

Supply of GI/Cu earthing conductors inclusive of providing earthing terminations and bracing of the terminations using necessary clamps, screws and bolts, PVC sleeves, etc. 25x6 Cu strip

Electrical cabling for UPS Laying of the following 1100V, Aluminium Cable, XLPE / AYFY in the existing cable trenches/cable trays / pipes/ etc. including supply and fixing of necessary clamping materials.

2 X 16 Sq.mm , 415 V

Termination of all materials and termination of the following PVC insulated Armoured Aluminium LT cables (AYFY/A2XFY) using single compression type cadmium plated brass cable glands , Copper crimped type cable lugs, cable identification tags and including gland earthing using copper conductor of adequate size,Al-Cu strip for termination of cables etc.

2 X 16 Sq.mm , 415 V

4 X 16 Sq.mm , 415 V

Fixing of 4 way double door TPN VDB

Fixing of 3 Pole Enclosure

Fixing of 2 Pole Enclosure

Fixing of 12 way SP DB

Fixing of 8 way SP DB

Fixing of 4 way SP DB

Fixing of 2 Pole Isolator 40A

Fixing of 2 Pole ELCB 40A 100ma Leakage

Supply of 2 Pole MCB 40A

Supply of 1 Pole MCB 32A

Fixing of 1 Pole MCB 16A

Fixing of 1 Pole MCB 6A

Laying of 6sq mm PVC insulated Copper Wire

Laying of 2 nos of 2.5 sq mm and 1 nos of 1.5 sq mm PVC insulated Copper Wire

Laying of 2 X 10 SWG Bare Copper

Fixing of 3 nos 6A socket controlled by 3 switch

Fixing of 2 nos 6A socket controlled by 2 switch

Fixing of 1 nos of 6A socket controlled by 1 switch

Fixing of 1 nos of 16A socket controlled by 1 switch

Laying of 20 MM PVC Conduit accessories

Fixing of Exhaust Fan - 12"

Fixing of All materials for Plate(Galvanised Iron) Earthing as per IS-3043-1987

OPERATION AND MAINTENANCE

Operation and Maintenance by providing 6 dedicated IT Support Engineers

SBL Knowledge Services Ltd