REPAIRS TO BRICK WORK FALSE CEILING ROOF LEAKAGE OF CERTAIN BLDGS OF GARDEN CITY COD ROAD AND DEMSY ROAD UNDER AGE BR EAST AT GE DEHU ROAD

Amount

Demolition of brick/stone masonry built in cement mortar including all quoins, arches, pillars etc., complete all as specified and as directed.

Demolition concrete in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified.

Dismantling single layer Mangalore pattern or similar tiles in roofing.

All as per item No 3 above but portion bedded in cement mortar complete all as specified.

Dismantling wall & ceilling boards(fibre pulp insulation etc) or insulation boards/ slabs/blankets, any thickness including cover fillets.

M&L, brick work with sub class ‘B’ bricks (old size) straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and as directed.

Dismanteling MS works of any desc. not otherwise provided for complete all as specified.

M & L for Rendering 15 mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces including finished even and fair complete.

M & L for Rendering 15 mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces incl admixture of WPC 3% by wt of cement. (WPC to be measured separately) including finished even and fair., finished fair and even complete. finished fair and even complete.

M & L for Preparation of new previously plastered or unplastered surfaces of walls and applying two coats of oil bound distemper in approved colour/ shade over a coat of chalk whiting primer after preparation of surfaces complete.

M&L for prepartion of newly plastered surface of wall applying two coats of weatherproof paint on external surfaces including a coat of alkali resistant priming paint complete all as specified.

Taking down cement plaster of any description and in any position of brick/stone walls or concrete surfaces and racking out joints hacking for key , scrubbing down with water etc and material and labour for 20 mm thick plastering in cement mortor 1:4 in two layers , mixed with WPC as per manufacturers instruction ( WPC shall be measured and paid separatly ) on brick or concrete surfaces of any description and finishing the surface even and fair complete and applying two coat of cement base paint to newly plastered surface including preparation of new plastered surface etc all as specified and directed.

Supply only WPC

Taking down cement plaster of any description and in any position of brick/stone walls or concrete surfaces and racking out joints hacking for key , scrubbing down with water etc and material and labour for 15 mm thick plastering in cement mortor 1:6 , including sagol finish on plastered surfaces complete and applying two coat of oil bound distemper over a coat of chalk whitening primer and preparation of new plastered surface etc all as specified and directed.

M&L for PCC type B1(1:2:4, using 20mm graded stone aggregate) as in coving, edging all as specified and directed.

S & F 0.5mm pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed self tapping screws & all accessories etc complete.

All as per item No. 16 above but Plain galvalume sheet fix in valley gutter / ridge

S&F Anodised Alu. Snap grid 605x605 mm frame work for false ceiling with and including 6mm dia GI wire for hangers adjusting level fixed to roof slab by means of ceilig cleats made out of flat 40x03mm size 60mm long including 9 mm th acoustical board/tiles 60cm x 60cm in size for insulation & accoustic purpose fixed in ceiling with screw to frame work or with staples on snab grid complete as specified as directed.

M &L for MS work as Hand rails, half round or other stock section or core for wooden hand-rail straight portion,drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; in wind tie or any other work incl cutting, drilling holes etc complete all as specified & directed by Engr-in-Charge.

S&F Rolled Sections as in main croos beams , hip and jack rafters; purlins, where connected to common rafter , posts etc. conf to Fe-410-w(gdeE-250 quality-A)

M&L for 75mm thick PCC (1:4:8) type D2, using 40mm graded stone aggregate) as in sub base of interlocking reflective pavers block & chequered cement concerete tiles .

M&L for laying machine pressed precast concrete interlocking reflective coloured pavers block any shape and size confirming to IS 15658-2006 of 55mm to 60mm thick, M-35 Grade over 50mm thick sand layer all as specified and directed by Engr-in-Charge at site.

M&L for preparation of old decorated steel surfaces of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint Complete all as specified and as directed.

M & L for 75 mm thick cement concrete (1:2:4) type B-1 (20mm graded agg) as in floor complete all as specified and as directed

M&L for 75mm thick cement concrete (1:3:6) type C2 (using 40mm graded stone agg.) as in plinth protection finished top surface even and smooth with out using extra cement

M & L for applying bitumen & sand in 1:3 mix for construction joint of road berm etc 10mm wide & depth n.exc 75mm complete

Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3, complete all as specified and as directed

M&L for water proofing treatment using polymerised membrane to roof slab. Water proofing treatment shall be as under & including taking down existing WPT including cement plaster (any no of layers on roof surfaces, cleaning the surfaces & removing the debris out MD land completed:- (a) 10mm thick rendering in CM (1:4) on concrete surfaces / slabs with admixture of integral water proofing compound @ 3% by weight of cement for filling depressions if any to receive water proofing treatment. (b) Applying cold bitumenous oil based primer IS No 3383 @ 250 Gms/Sqm. (c) Laying APP Modified membrane with non woven polymer reinforcement / mat core (Centre core) not less than 3 mm thick and not less than 3.50 kg/sqm the overlap shall be 100 mm on length side and 100 mm on width side and all as per manufacturer instruction complete. The roof surface shall be thoroughly wire brushed, washed, dried up & cleaned to remove all foreign materials & dust to receive primer. (d) Applied with 0.15 Kg/Sqm bitumenous aluminium paint. Note : (i) The qty to be done is in small pieces of 6 to 8 Sqm area. (ii) WPC shall be measured & paid separately.

Supply and fix precast hume pipe septic tank 25 users capacity and connecting to the incoming sewre line & soak pit make a serviceable sewer line complete all as directed. Note : Rate for excavation & earth work, returning filling removel etc is includes in this items.

S & F Steel rolling shutters, of 1mm thickness of laths, with or without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position push pull or manual type complete and all as directed by Engineer in Charge.

S & F Collapsible steel gates, top hung,consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and as directed.

Dismantling floor hearth or wall tiling incl cement mortar bedding/plaster (but not backing) and removing rubbish off the premises etc complete all as directed.

M&L for vitrified coloured tiles 10mm thick (square/rectangular) polished area of each tile 0.30 sqm but n exc 0.42 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15 mm th screed bed in CM 1:6 complete

Ditto above item No 51 but on skirting over 10 mm th rendering in CM 1:4 complete.

M&L for glazed coloured ceramic tiles 350 mm x 250mm/450mmx350x7 to 7 mm thick as in vertical surfces set & jointed in neat cement slurry & pointed in coloured cement incl & with backing coat 10mm thick in CM 1:4 all as direced.

M&L for Non-skid coloured Ceramic tiles of size 300 x 300 x 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles over & including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified.

M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over & including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed.

All as per item No. 44 above but on skirtings incl 10 mm th rendering in CM (1:4) complete.

Preeti Enterprises

H S TAKHI

RAMESH PATIL

DR J S CHADHA AND SONS

Santhi Enterprises