RequiredAnnual Turnover
RequiredOEM Authorization Certificate
RequiredOEM Annual Turnover Bid to RA enabled No Note: 1. OEM Turn Over Criteria: The minimum average annual financial turnover of the OEM of the offered product during the last three years
Requiredending on 31st March of the previous financial year
Requiredshould be as indicated in the bid document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a certificate from the Chartered Accountant/Cost Accountant indicating the turnover details for the relevant period shall be uploaded with the bid. In case the date of constitution/incorporation of the OEM is less than 3 year old
Requiredthe average turnover in respect of the completed financial years after the date of constitution shall be taken into account for this criteria. Water Tanker Mounted On Four Wheels Trailer ( 2 pieces ) Technical Specifications * As per GeM Category Specification 1/6 Specification Specification Name Values Bid Requirement (Allowed Values) Generic Parameters Type of Trailers Balanced Trailer (Double Axle) Balanced Trailer (Double Axle) Capacity of water tank in litre 6000 6000 Net water carrying capacity in liter 4500 More than 4500.0 Or higher Material used for fabrication of water tank M S Plate conforming the IS:1730 Latest M S Plate conforming the IS:1730 Latest Thickness of the water tank plate(min )(mm)conforming to IS:6911 4 More than 4.0 Or higher Gross weight of water tank in Kilogram 1200 More than 1200.0 Or higher Capacity of Trailer (Gross Load in Tonne) 8 8 Material used for fabrication of trailer as per Clause-5
RequiredTable-1 of IS:8213 (Latest) Yes * Type of Axle Assembly (The capacity of Single Axle Trailers is not more that 5 Tonnes) Double Axle (Load carrying capacity upto 10 Tonne) * Overall length of Trailers 5.8 Less than 5.8 Or lower Overall Width of Trailers between extreme points 1.64 Less than 1.64 Or lower Overall Height of Trailers with tyre inflated from the supporting surface to top of platform 1.15 Less than 1.15 Or lower Overall Height of Trailers with tyre inflated from the supporting surface to sideboard 2.15 Less than 2.15 Or lower Ground Clearance 325 More than 325.0 Or higher Tipping Facility No No If Tipping facility then Provide the tipping 0 * 2/6 Angle in Degree Axle Assembly Wheel Track 1600 * Axle Assembly dimensions as per Table-2 of IS:8213 (Latest) Yes * Reto Reflective Marking (tapes) as per AIS -090 Yes * Lighting and Lighting - signalling device as per AIS- 62 Yes * Trailers shall have service and parking brake as per AIS- 43 Yes * The Trailers shall be fitted with pneumatics tyres and rims of suitable size confirming to IS 13154 :1991 and IS 10694 :1988 Yes * Ladder provision on back side of tank Yes * Material of Ladder SS:304 G * Dimension of Ladder - * The tanker shall have the provision of one main delivery valve at bottom of tanker and one number outlet at the back side of tanker Yes * Number of Wheels Four * Constructional Parameters ISI marked ISMC channel used for fabrication of Chassis and frame mounting on chassis Yes * Type of spring suspension system (as per IS:1135) for load carrying capacity - * Dimensions of Spring Leaf - * Diameter of the Axle of chassis (Min) 112 More than 112.0 Or higher No of spring leaves plates fitted 15 More than 15.0 Or higher Lashing hooks for Yes * 3/6 towing down load No of Hooks 2 More than 2.0 Or higher Type of Towing Device - * Capacity of Towing 15 More than 15.0 Or higher Painted Colour on the Trailers as per AIS 112 Red * Two coat of Red Oxide and one coat of black Paint Yes * the tanker will be buffing with dull shine inside and outside of tanker Yes * Turntable ring made of 50x50x5mm thick MS angle with Male Female bush type of 8 mm thick with suitable fittings Yes * Logo and Slogan writing as specified by buyer Yes * JETTING Pump water capacity LPM 38 * Pump pressure 150 More than 150.0 Or higher High pressure gun High pressure gun suitable for 38 LPM/150 Bar * Un loader valve Un loader valve for 38 LPM 150 Bar * Direction Valve Suitable for hydraulic control system * Jetting hose Jetting hose 20 Meter of 3/8 Dia (9.525mm) * Hose reel Auto rewind * Water Strainer Water filter will be provided for clean water for jetting machine * The Jetting pump will be operated by Power take off of the tractor Yes * Certification Conformity to standards IS 8213:2000 with latest amdmnt.
RequiredAIS: 112 with latest * 4/6 amndmt. Necessary clearance from RTO for design of water tanker to be obtain before supply of Trailer as per applicable RTO rules in States Yes * RTO approval Number and date - * "Avaliability of Test report fron approved Laboratory to prove conforming to specification as per AIS 043" Yes * Test report No And date - * Name of the testing Laboratory - * Availability of NSIC registration certificate for water tanker Yes * Certificate no and date hint: If not regd say "NA" - * * Specifications highlighted in bold are the Golden Parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
