Construction of Science Park at Kannur - Phase I (Package I)

Constructing, Finishing and making the Admin Building functional in all respect : Earth Work Cutting and Levelling in all kinds of Soil, RCC framed structure (Service Floor + G +2 + Mumty) with filler walls of Autoclaved aerated cement blocks (AAC blocks), including internal water supply, Internal Sanitary installations, Providing Oil and Grease Chamber of the Sewage Line to the STP, RCC Retaining Wall part of Building Structure, Terrace Water Tanks, Plinth Protection with following MEP works of entire building – (a) Internal Electrical Works : Sub-Main, Circuit Point Wiring, and Power Point Wiring, Fittings, Fans, SDBs, MCB-DBs with accessories, Main Panel, Floor-wise Panel, Sub Panel, Cable Trays, Cabling, earthing, etc. (metering shall be integrated with BMS). (b) Lightning Protection Works including Earthing (c) Lifts: two nos of Machine Room Less (MRL) Lifts of 8 passengers capacity with 900 mm door, integrated with BMS, (d) Fire alarm: (i) Addressable type automatic fire alarm system with 2 loop main control panel having built-in battery, display system, cards etc. for integrating with BMS, (ii) Accessories like heat detectors for kitchen area/ multi-sensor type detector for other areas having isolation facility , Manual Call box etc. (iii) Digital Type Voice Type Evacuation System with built in Amplifier and other accessories like microphone, speakers, etc. (e) Firefighting : (i) Connecting the riser fire pump at terrace, fire station cabinet with hydrant valve, first aid hose, canvas hose, branch pipe etc. (ii) Portable type Fire extinguishers (iii) Luminous Type Signage powered with UPS. (f) CCTV : Doom / Bullet Type Camera useful for indoor / outdoor type connected with a CAT 6A cable, network rack and switch, display system and Network recording System (NVR) with 10 TB Hardisk. (g) Low Side HVAC : (i) Cold Water Piping from the existing Ring Main to AHUs (Double skin, Eurovent/BIS certified, insulated, backward curved aerofoil plug fans with VFD, multi-stage filters, UV lamps, IE3 motors, vibration isolation, weather-proof VFD, BMS compatible, sound ≤ 65 dBA, coil pressure drop ≤ 7 PSIG), VAV (Pressure-independent, with actuators, controllers, thermostat, actuator, control cables, flexible ducts, GI conduits), Duct for supply and return air, Fire Damper (Motorised, spring-return (auto close on power failure/fire signal), integrated with fire panel) , Grills, VAV and thermostat control for each room, Insulated Drainage Pipe, providing 2 nos. of 2 TR inverter split type AC (5 star rated) operated with timer for UPS room as additional AC system. (ii) Acoustic Treatment : Wall and Ceiling of AHU rooms and Ceiling of Top Floor of AC area by providing Aluminium Strip Framework of 1m x 1m, 50mm thick 32 Kg/m3 Glass Wool with RP tissue paper and Aluminium Perforated Sheet on outer surface, ventilation system for all corridors and bathrooms (h) UPS: 90KVA modular type UPS having 30 minutes backup (frame size of modular UPS can have more capacity) for essential services and fire alarm. (i) Networking & IP PBX: (i) Providing entire passive and active components such as suitable size rack with Patch Panel, switches, Cable tray, CAT 6A Cabling rack to RJ 45 outlet, 12 Core OFC Cable from Main Rack to Sub Rack (including commissioning BMS and network for computers, CCTV, IP phone etc.) including DDC panel & connected all works for entire network system such as commissioning BMS and different network system for BMS, etc. (ii) IP PBX with SIP trunk technology suitable for not less than 100 IP phone including cabling and commissioning (Make - Matrix, Seimens, Astrix) all complete. The building shall be constructed as per the approved architectural, structural and MEP drawings, Brief/ Technical specification and General specifications etc. as included in the tender document. No. of Blocks: One. (B Block)

Constructing ,Finishing and making the R & D Block 1 functional in all respect : Earth Work Cutting and Levelling in all kinds of Soil, RCC framed structure (Service Floor + LG + G + 3 + Mumty) with filler walls of Autoclaved aerated cement blocks (AAC blocks), including internal water supply from sump to the Terrace Tank and further distribution lines, fittings as per the building MEP drawings and Sanitary installations and pipe lines, Providing Oil and Grease Chamber of the Sewage Line to the STP, RCC Retaining Wall part of Building Structure, Sump with Pumping System, RCC Water Tanks, Plinth Protection with following internal MEP works of entire building – (a) Internal Electrical Works : Sub-Main, Circuit Point Wiring, and Power Point Wiring, Fittings, SDBs, MCB-DBs with accessories for common area and sample lab of 3 Module and one light point and fan hooks for other labs, Main Panel, sub-panels, compact type aluminium bus bar with End Feed Box, Tap Off Units etc. as per SLD, Cable tray, Cabling, earthing etc. (metering, energy meter, having RS Port need to be integrated with BMS for all sample lab and provision for other labs) etc. (b) Lightning Protection Works including Earthing (c) Lifts : Three nos of Machine Room Less(MRL) Lifts of 20 passengers capacity and one number of Good Lift (MRL) of 3 Ton Capacity integrated with BMS, (d) Fire alarm : (i) Addressable type automatic fire alarm system with 8 loop main control panel having built-in battery, display system, cards etc. for integrating with BMS (for sample lab additional detector in between slab and false ceiling need to be provided and other labs, provisions for providing additional detector and if the occupying agency need to provide false ceiling), (ii) Accessories like heat detectors for kitchen area / multi-sensor type other areas having isolation facility , Manual Call box etc (iii) Digital Type Voice Type Evacuation System with built in Amplifier and other accessories like microphone, speakers, etc. (e) Firefighting : (i) Pipeline inside the building, connecting the riser, fire pump at terrace, fire station cabinets with hydrant valves, first aid hoses, canvas hoses, branch pipes etc. (ii) Portable type Fire extinguishers (iii) Luminous Type Signage powered with UPS. (f) Automatic Sprinkler System : Pipeline inside the building, connecting riser pipe from the existing ring main, drainage piping providing sprinkler system entire building (for sample lab additional sprinkler in between slab and false ceiling need to be provided and for other labs provisions for providing additional sprinkler if the occupying agency need to provide false ceiling, in these labs flexible connecting pipe of suitable length shall be used for connecting sprinkler to pipeline by considering false ceiling) (g) CCTV : Doom / Bullet Type Camera useful for indoor and outdoor type connected with a CAT 6A cable, network rack and switch, display system and Network recording System (NVR) with 10 TB Hardisk. (h) Low Side HVAC : (i) Cold Water Piping (Pre Insulated) in the building including tapping the pipelines from the existing Ring Main, Ceiling Suspended type AHUs (Double skin, Eurovent/BIS certified, insulated, backward curved aerofoil plug fans with VFD, multi-stage filters, UV lamps, IE3 motors, vibration isolation, weather-proof VFD, BMS compatible, sound ≤ 65 dBA, coil pressure drop ≤ 7 PSIG), VAV (Pressure-independent, with actuators, controllers, thermostat, actuator, control cables, flexible ducts, GI conduits), Duct for supply and return air, Grills, VAV and thermostat control, Insulated Drainage Pipe, etc. for sample lab (3 Module), UPS/Server Room and Fire Control/BMS Room (For all other labs, pipes shall be terminated inside the lab with pipe providing suitable type valves for metering and AHUs to be provided later date), providing 2 nos. of 2 TR inverter split type AC (5 star rated) operated with timer for UPS room as additional AC system. (ii) Metering : BTU meter integrated with BMS for main header line, sample lab (Ceiling Suspended AHU in other labs including metering will be in the scope of occupant) (i) Ventilation System in all corridors and bathrooms (j) Other Metering : Metering integrated with BMS shall be provided for normal water, RO Water, Vacuum, Compressed Air etc for sample lab (for other labs, metering will be in the scope of occupant). (k) UPS : 60KVA modular type UPS having 30 minutes backup (frame size of modular UPS can have more capacity) for essential services and fire alarm. (l) Networking: Providing entire passive and active components such as suitable size server, distribution rack & rack with Patch Panel, switches, Cable tray, CAT 6A Cabling rack to RJ 45 outlet, 12 Core OFC Cable from Main Rack to Sub Rack, 24 Core OFC cable from main entrance to the building in suitable size HDPE pipe for server (including commissioning server, server cooling system, racks, BMS and network for computers, CCTV, IP phone etc. for the entire campus) including DDC panel & connected all works for entire network system such as commissioning BMS and different network system for BMS, etc. all complete. The building shall be constructed as per the approved architectural, structural and MEP drawings, brief / technical specification and General specifications etc. as included in the tender document. No. of Blocks: One (C1)

Constructing ,Finishing and making the R & D Block 2 functional in all respect : Earth Work Cutting and Levelling in all kinds of Soil, RCC framed structure (Service Floor + LG + G + 3 + Mumty) with filler walls of Autoclaved aerated cement blocks (AAC blocks), including internal water supply from sump to the Terrace Tank and further distribution lines, fittings as per the building MEP drawings and Sanitary installations and pipe lines, Providing Oil and Grease Chamber of the Sewage Line to the STP, RCC Retaining Wall part of Building Structure, Sump with Pumping System, RCC Water Tanks, Plinth Protection with following internal MEP works of entire building – (a) Internal Electrical Works : Sub-Main, Circuit Point Wiring, and Power Point Wiring, Fittings, SDBs, MCB-DBs with accessories for common area and sample labs of 2 Module & 1 module and one light point and fan hooks for other labs, Main Panel, sub-panels , compact type aluminium bus bar with End Feed Box, Tap Off Units etc. as per SLD, Cable tray, Cabling, earthing etc. (metering, energy meter, having RS Port need to be integrated with BMS for all sample lab and provision for other labs) etc. (b) Lightning Protection Works including Earthing (c) Lifts : Three nos of Machine Room Less(MRL) Lifts of 20 passengers capacity and one number of Good Lift (MRL) of 3 Ton Capacity integrated with BMS, (d) Fire alarm : (i) Addressable type automatic fire alarm system with 8 loop main control panel having built-in battery, display system, cards etc. for integrating with BMS (for sample labs additional detector in between slab and false ceiling need to be provided and other labs, provisions for providing additional detector and if the occupying agency need to provide false ceiling), (ii) Accessories like heat detectors for kitchen area / multi-sensor type other areas having isolation facility , Manual Call box etc (iii) Digital Type Voice Type Evacuation System with built in Amplifier and other accessories like microphone, speakers, etc. (e) Firefighting : (i) Pipeline inside the building, connecting the riser, fire pump at terrace, fire station cabinets with hydrant valves, first aid hoses, canvas hoses, branch pipes etc. (ii) Portable type Fire extinguishers (iii) Luminous Type Signage powered with UPS. (f) Automatic Sprinkler System : Pipeline inside the building, connecting riser pipe from the existing ring main, drainage piping providing sprinkler system entire building (for sample labs additional sprinkler in between slab and false ceiling need to be provided and for other labs provisions for providing additional sprinkler if the occupying agency need to provide false ceiling, in these labs flexible connecting pipe of suitable length shall be used for connecting sprinkler to pipeline by considering false ceiling) (g) CCTV : Doom / Bullet Type Camera useful for indoor and outdoor type connected with a CAT 6A cable, network rack and switch, display system and Network recording System (NVR) with 10 TB Hardisk. (h) Low Side HVAC : (i) Cold Water Piping (Pre Insulated) in the building including tapping the pipelines from the existing Ring Main, Ceiling Suspended type AHUs (Double skin, Eurovent/BIS certified, insulated, backward curved aerofoil plug fans with VFD, multi-stage filters, UV lamps, IE3 motors, vibration isolation, weather-proof VFD, BMS compatible, sound ≤ 65 dBA, coil pressure drop ≤ 7 PSIG), VAV (Pressure-independent, with actuators, controllers, thermostat, actuator, control cables, flexible ducts, GI conduits), Duct for supply and return air, Grills, VAV and thermostat control, Insulated Drainage Pipe, etc. for each sample labs (2 Module and 1 Module), UPS/Server Room and Fire Control/BMS Room (For all other labs, pipes shall be terminated inside the lab with pipe providing suitable type valves for metering and AHUs to be provided later date), providing 2 nos. of 2 TR inverter split type AC (5 star rated) operated with timer for UPS room as additional AC system. (ii) Metering: BTU meter integrated with BMS for main header line, all sample labs (Ceiling Suspended AHU in other labs including metering will be in the scope of occupant) (i) Ventilation System in all corridors and bathrooms (j) Other Metering : Metering integrated with BMS shall be provided for normal water, RO Water, Vacuum, Compressed Air etc for sample labs (for other labs, metering will be in the scope of occupant). (k) UPS : 60KVA modular type UPS having 30 minutes backup (frame size of modular UPS can have more capacity) for essential services and fire alarm. (l) Networking: Providing entire passive and active components such as suitable size rack with Patch Panel, switches, Cable tray, CAT 6A Cabling rack to RJ 45 outlet, 12 Core OFC Cable from Main Rack to Sub Rack (including commissioning BMS and network for computers, CCTV, IP phone etc.) including DDC panel & connected all works for entire network system such as commissioning BMS and different network system for BMS, etc. all complete. The building shall be constructed as per the approved architectural, structural and MEP drawings, brief / technical specification and General specifications etc. as included in the tender document. No. of Blocks: One. (C2)

Constructing ,Finishing and making the Residence (Studio Block) functional in all respect : Earth Work Cutting and Levelling in all kinds of Soil, RCC framed structure (Service Floor + G+6 + Mumty) with filler walls of Autoclaved aerated cement blocks (AAC blocks), including internal water supply from sump to the Terrace Tank and further distribution lines, fittings as per the building MEP drawings and Sanitary installations and pipe lines, Providing Oil and Grease Chamber of the Sewage Line to the STP, RCC Retaining Wall part of Building Structure, Sump with Pumping System, RCC Water Tanks, Plinth Protection with following internal MEP works of entire building – (a) Internal Electrical Works : Sub-Main, Circuit Point Wiring, and Power Point Wiring, Fittings, Fans, SDBs, MCB-DBs with accessories, Main Panel, Floor-wise Panels, Sub Panels, floor-wise metering panels (as per KSEB specifications), compact type busbar with accessories from main panel to Floor-wise metering panel, Cable Trays, Cabling, earthing, etc,. (b) Lightning Protection Works including Earthing (c) Lifts : one Machine Room Less (MRL) Lift of 13 passengers capacity, one Machine Room Less (MRL) Service Lift of 15 passenger capacity , (d) Fire alarm: Fire Alarm control panel with voice evacuation system, built-in battery, display system, cards, etc. (e) Firefighting: (i) Connecting the riser- fire pump at terrace, fire station cabinet with hydrant valve, first aid hose, canvas hose, branch pipe etc. (ii) Portable type Fire extinguishers (iii) Luminous Type Signage powered with UPS. (f) CCTV : Doom / Bullet Type Camera useful for indoor / outdoor type connected with a CAT 6A cable, network rack and switch, display system and Network recording System (NVR) with 10 TB Hardisk. (g) UPS: 1 number 3KVA UPS having 30 minutes backup (Connected in Parallel) for essential services and fire alarm. (h) Networking: Providing entire passive and active components such as suitable size rack with Patch Panel, switches, Cable tray, CAT 6A Cabling rack to RJ 45 outlet, 12 Core OFC Cable from Main Rack to Sub Rack (including commissioning BMS and network for computers, CCTV, IP phone etc.) including DDC panel & connected all works for entire network system such as commissioning BMS and different network system for BMS, etc. all complete. The building shall be constructed as per the approved architectural, structural and MEP drawings, Brief / Technical specification and General specifications etc. as included in the tender document. No. of Blocks: One. (D1 Block)

Constructing ,Finishing and making the HT Panel Room (Ground Floor), LT Panel Room + AC Plant Room (G + 1 Floor) and Pump room for Diesel Storage Tank(Ground Floor) (including Fencing () functional in all respect : Earth Work Cutting and Levelling in all kinds of Soil, RCC framed structure with filler walls of Autoclaved aerated cement blocks (AAC blocks), including internal water supply and Sanitary installations, RCC Retaining Wall part of Building Structure, Water Tanks, Plinth Protection with following internal MEP works – (a) Internal Electrical Works : Sub-Main, Circuit Point Wiring, and Power Point Wiring, Fittings, SDBs, MCB-DB (b) HT Panels & HT Cables: HT master meters - Panel 1 & 2, HT Panel - Panel 3& 5 (with Powerpack panel with batteries, booster charger, metering, etc.), HT meter - Panel 4, HT Panel of studio apartment - panel 63, 3C x 300 sq.mm 11 KV Cable from Master metering panels 1 & 2 to HT Panel, HT Panel 3 to metering panel 4, metering panel 4 to HT panel 5 and HT panel 63 of Studio apartment (c) Transformer : 2 nos, 11/0.433 KV ONAN type copper Wound - 2000 KVA OLTC outdoor transformer with all accessories for C1, C2 & Admin Block and 2 nos of 11/0.433 KV ONAN type copper Wound - 200 KVA Offload Tap Switch outdoor transformer with all accessories for Studio Apartment. (d) DG set : 5 nos 500 KVA DG set with acoustic enclosure in-buit diesel tank, Exhaust system with supporting structural works, piping, control cabling, etc. (e) LT Panel Outdooe/Indoor Bus Duct : Non Essential Panel - Panel 6, APFC Panels - Panel 7 & 8, Synchronizing panel - Panel 9, Essential Panel - Panel 10 for electrical distribution, Bus Duct from Transformer to Non Essential Panel, Non Essential panel to Synchronizing Panel, Synchronizing panel to Main Panel of Block C1, C2 and Main Panel of HVAC (Outdoor type Bus Duct with Canopy shall be fixed on a suitable size structure), common service panel - panel 44, fuel pump panel - panel 48, (f)Diesel Storage Tank : 25 KL capacity Main tank, 995 L capacity buffer tank, 2 nos of Pump, Automatic pumping system upto buffer tank, piping, gravity flow with control valve, buffer tank to the in-built diesel tank of DG set, piping, valves, flow-meter, overflow piping from in-built diesel tank to Main Storage tank.etc. required as per Explosive Department Norms. (g) Networking: Providing entire passive and active components such as suitable size rack with Patch Panel, switches, Cable tray, CAT 6A Cabling rack to RJ 45 outlet, 12 Core OFC Cable from Main Rack to Sub Rack (including commissioning BMS and network for computers, CCTV, IP phone etc.) including DDC panel & connected all works for entire network system such as commissioning BMS and different network system for BMS, etc. all complete. Note - The shop drawings of the bus duct, strcutural work for supporting outdoor Bus Bar, road crossin methods etc. need to be submitted for approval before execution No. of Blocks: Three.

LT Cabling - Supply and Laying (in ground, horizontal formation in ground, cable tray, open trench on surface, end terminations etc. as per CPWD specification (sand cushioning and protective covering for cable laying ground shall be done by using M-sand and PCC slab)) of the following 1100 volts grade, Aluminium/Copper conductor, XLPE insulated, PVC sheathed, steel armoured/Unarmoured cables as per IS 7098 Part-1 and as per technical specifications of this tender, (i) 3.5 x 300 sq.mm. Al Ar. XLPE cable - 7300 m, (ii) 3.5 x 240 sq.mm. Al Ar. XLPE cable - 2700 m, (iii) 3.5 x 185 sq.mm. Al Ar. XLPE cable - 2060 m, (iv) 3.5 x 150 sq.mm. Al Ar. XLPE cable - 1730 m. Note - Cables inside the building are already considered in the item of work. The quantity mentioned above is excluding cables of buildings. Quantity mentioned above need to be verified before placing the order. The payment for the cable for (+) / )-) variations will be worked out on proportionate rate basis given in the Breakup SChedule of Payment. The payment shall be based on the quantity laid at site, measure and certified by the Engineer in Charge. Balance Quantity of cables brought at site, if any, will not be paid and shall be taken back by the contractor.

AC PLANT EQUIPMENTS - Supply, Installation, Testing and Commissioning of Air Conditioning System with following Plant Equipments as per Technical details, specifications and standards including foundation, anti vibration system, Computer for automatic BMS operations with desktop computer etc as required with following. (a) AHRI certified Water Cooled Screw Chiller with semi-hermetic twin screw compressor, R-134a refrigerant.(Min. 350 TR capacity), Microprocessor control panel, BMS compatibility (BACnet/MODBUS) and other required accessories - 3 nos (Make - York, Tranee, Carrier, Mitsubishi(Climavineta)) (b). AHRI certified Air Cooled Screw Chiller with semi-hermetic twin screw compressor, R-134a refrigerant.(Min. 120 TR capacity), Microprocessor control panel, BMS compatibility (BACnet/MODBUS) and other required accessories - 1 nos - (Make - York, Tranee, Carrier, Mitsubishi(Climavineta)) (c). CTI certified FRP Cooling Towers with induced draft cross/counter flow, VFD controlled fan motor (outdoor rated) (for 350 TR water-cooled chiller) and other required accessories - 3 nos - (Make - Bell, Paharpur, Advance, Marley) (d). Horizontal split casing, IE3 motors, 1450 rpm, PN-16, SS impellers, Condenser Water Pumps For 350 TR: 1400 US GPM @ 25 m head - 3 nos - (Make - Groundfoss, Armstrong, Wilo) (e). Primary Chilled Water Pumps(Sensorless- Vertical), SS impellers for 3 nos for 350 TR (840 US GPM @ 15 m head) and 1 no. for 120 TR (288 US GPM @ 15 m head) - (Make - Groundfoss, Armstrong, Wilo) (f). Variable Speed Secondary Chilled Water Pumps(Sensorless- Vertical, SS impellers for 3 nos for 350 TR (840 US GPM @ 40 m head) and 1 no. for 120 TR (288 US GPM @ 40 m head) With pump-mounted VFD (IE5 motor efficiency), sensorless Includes bypass starter, insulation, gauges, etc - (Make - Groundfoss, Armstrong, Wilo) (g) Dedicated microprocessor based field device plant manger / pump logic controller, parallel pumping software duly downloaded, sensorless logic, interfacing amongst all components and compatibility of I/O signals, BMS compatible etc complete with other accessories as required. It should be complete as per manufacturer's Specifications (h) Panel - Main panel for chiller, Sub-panels for pumps, outdoor type panels for air cooled chiller and cooling towers.(i) vaious size of condenser water pipes and valves ( balancing valves, motorized bufferfly valves, insulating the valve wherever required) with all accessories with strainer, guages, pot strainer, Y strainer, plug valves, fixing the pipes with adequate supports, painting with 2 coats of epoxy orimer and 2 cots of green colour paint etc. as required (j) Factory insulated various size of chilled water pipe with required valves, insulating the pipe of welding locations, Aluminium cladding above the pipes fixing with proper support inside the pump room (k) Factory insulated various size of chilled water pipes with required valves, insulating the pipe of welding locations, laying the pipes in the ground with proper support, providing valves and valve chambers at the entry point of each building etc. as required. (l) 5000 Ltr capacity PVC Sintex Tank double layer for the make up of Cooling tower & condenser line. The scope is inclusive of Float Valve assembly, Inlet & drain ball valve, foundations as per OEM recommendation & necessary items required to compltete the system. Both tanks should be combined together. The Tank shall be placed at a minimum height of 2.5 Mtr from Cooling Tower basin level - 1 no (m) INSULATED PRESSURISED CLOSED WATER EXPANSION TANK of 2000 Litre suitable for total volume of Water Solution, circuit along with necessary accessories such as along with necessary accessories such as 2 Nos pumps (1working +1standby) with Pressure Transmitter and interconnecting Pipe & Isolating Valve complete with piping connections, safety relief valve, drain valve, pressure gauge, automatic air purging arrangement, etc.with Pressure Transmitter and interconnecting Pipe & Isolating Valve complete with piping connections, safety relief valve, drain valve, pressure gauge, automatic air purging arrangement, etc. The tank shall be pre-charged. Expansion tank Shall be with replaceable heavy duty butyl rubber bladder, provided with pressurization unit pump set with control panel and accessories, 50 mm thick PFU / nitryl rubber insulation, Aluminium cladding etc. as per technical specifications, standards. (n) Pressure vacuum line, air seperator, thermometer, water guaging meter etc. as required. (o) BMS - (i) 2 sets of I7 Processor or Equivalent Server PC, 4MB Cache with 8 GB RAM, & 1 TB HDD, 10/100 Mbps Ethernet card, USB connection & internal modem, Microsoft(R) Windows(R) 8 or better or latest OS Professional Enterprise, Web server software, DVD-ROM Drive (with RAM), 100/1000 Mbps NIC for Network connection and anti virus software with 21" colour graphics monitor as per Tender Specifications. Accessories included Optical Mouse, Key Pad, with the above BMS System configuration. (ii) 3RD Party System Software Integration - BTL Certified For open Protocols Integration units, to connect individual 3rd party microprocessor system controllers, the unit shall be capable of integrating all mentioned devices on BACnet, Modbus etc.as per distribution given below. System integration unit shall be of same make as of DDC Controller. Controllers with built-in integration ports are also acceptable, controller integration port can be used for 3rd party integration as per the given IO Summary" (iii) BUILDING MANAGEMENT SYSTEM WEB-BASED SERVER SOFTWARE BMS System Software : Supply, installation, testing and commissioning of the simultaneous minimum 5 user Web Based Graphical Software meeting the requirements in the Given I/O Summary and technical specifications including configuration and facility to create / provide the graphic mapping for all I/O Summary points , animate the Graphics, Navigation between pages, display of logs, changing the time zones, popup alarms, configurable password protection for Building Management System as per Technical Specifications. Software shall be able to communicate with open protocols like BACNet/OPC devices simultaneously. Software shall have Energy analysis/trending, Customized reporting, Alarming, scheduling features. During operation & maintenance if any controller is required to be replaced than software shall have feature to download logics in new controller as of old one, from control station, once the old controllers IP is mapped in new one. New Software patches/versions for 5 years after handing over of system shall be included in offer nothing extra shall be paid for new software patches developed by company for said time period. It shall be vendor responsibility to update / upgrade new software patches once it is developed. Graphic building and commissioning tool if separate from BMS software than the same is to be handed over to client. (p) Other equipment such as DDC panels, DC voltage transducers, current relays, outsise air temperature and humidity sensor, room temperature sensors, level switches for monitoring tank level, Flame Proof Bi-Level Switches for DG Day oil tank, water level switches for cooling towers, air differetial pressure switches for indicating fans blower and amp,filter status, flame proof level transmitters, differential pressure switches for monitoring pump run status, water differential pressure transmitters, immersion temperature sensors, network rack switch etc required as per specification and IO Summary (q) All type of Auminium power cables, copper control cables, CAT 6A cable, OFC cable etc required for connecting the equipments from panels, plant manager,DDC panel to equipments etc as required. (r) Networking: Providing entire passive and active components such as suitable size rack with Patch Panel, switches, Cable tray, CAT 6A Cabling rack to RJ 45 outlet, 12 Core OFC Cable from Main Rack to Sub Rack (including commissioning BMS and network for computers, CCTV, IP phone etc.) including DDC panel & connected all works for entire network system such as commissioning BMS and different network system for BMS, etc. all complete. (The I/O Summary given is tentative. The revised I/O Summary by incorporating additional requiremnt if any need to be submitted for approval for execution.)

Constructing ,Finishing and making the Pump House with Water Tank for Fire, Domestic Water Supply functional in all respect including all equipments, pipings, accessories etc. mentioned in the item : Earth Work Cutting and Levelling in all kinds of Soil, RCC Building, with necessary RCC tanks as per the scheme , Internal E & M installation with following (a) Diesel Engine Driven Fire Pump : Diesel engine (water cooled 1500 rpm suitable hp starting mechanism with 24 volt battery, residential type silencer & exhaut piping insulated with 50mm thick glass wool, cladding with 1 mm thick Aluminium Sheet.) driven fire pump suitable for automatic operation, 2850 LPM at 70m head having horizontal multi stage centrifugal split casing pump with stainless steel impellor, SS shaft mechanical seal - 1 set. (b) Electric Driven Fire Pump : Electric Driven fire pump suitable for automatic operation, 2850 LPM at 70m head having horizontal multi stage centrifugal split casing pump with stainless steel impellor, SS shaft mechanical seal with suitable hp squirrel guage induction motor TEFC type, class F insulation - 1 set. (c) Electric Driven Pressurisation Pump (Jockey Pump) : suitable for Automatic operation of 180 LPM at 70m head horizontal multi stage centrifugal split casing pump with stainless steel impellor, SS shaft mechanical seal with suitable hp squirrel guage induction motor, class F insulation (d) Piping : (i) All type of Heavy Class MS pipes inside the pump house with proper supports, painting with 2 cots epoxy primer and 2 cots of red coloured epoxy paint (ii) 150mm dia Heavy Class MS pipe with all accessories with anti corrosive protective treatment, coal tar / asphalt tape, wraping coating below ground including trenching, refilling etc from fire pump room to all buildings (e) Valves and Accessories for Firefighting System : Double flanged Sluice Valves of various diameters, non - return valves, Y strainer, draw out & draw in fire bridge connection to water tanks, Automatically operated Control panel with suitable MCCB incoming & outgoing, starters, with automatic operating system, battery charger, electrical and control cabling from panel to all pumps, fire extinguishers etc. (f) Pumps and Accessories for Water Supply : (i) 2 nos of hydropneumatic pumping system for Admin Building at Pump house, (ii) 2 nos of submersible pump with automatic pumping system for pumping rain/ leakage water from the sump of bottom most floor to drainage for C1 block, simlarly for C2 block, residence, pump house and ESS + HVAC plant building. (iii) 2 nos of pump with automatic pumping system for pumping water from pump room near water tank to HVAC equipment / make up tank. (iv) Piping with all type of valves and acessories for supplying water from the Main Water tank to C1, C2, Studio Block and Solid waste Management building under Gravity flow, piping with all type of valves and acessories for all other pumps upto delivery tanks / points. (g) Networking: Providing entire passive and active components such as suitable size rack with Patch Panel, switches, Cable tray, CAT 6A Cabling rack to RJ 45 outlet for hydropneumatic pumping system (including commissioning BMS and network for computers, CCTV, IP phone etc.) including DDC panel & connected all works for entire network system such as commissioning BMS and different network system for BMS, etc. all complete. No. of Blocks: One and its allied services. (G Block)

Constructing ,Finishing and making the Sewage Treatment Plant Room (STP PLANT – H) functional in all respect: Earth Work Cutting and Levelling in all kinds of Soil, RCC Building, with necessary RCC tanks as per the scheme including internal water supply and Sanitary installations. The building and tanks shall be completed as per the approved drawings and specification. Internal E & M installation including SITC of 1 no - 120 KLD (3 x 40 KLD) in modular fashion fully Automatic Moving Bed Bio-Film Reactor (MBBR) with Ultra filtration system based Sewage Treatment Plant (STP) complete with following : (i) Suitable Size Bar-Screen Chamber, Conveyor Type Lifting Arrangement for Solid Waste(outside of building, near to collection tank after the last manhole). The perforated bar-screen shall be made with rust-free high grade stainless steel with minimum bar spacing lesser than 15mm. The STP will have the following Electro-Mechanical components. (1) 2 nos of Air Blower having capacity of 120 m3/hr at a head of 4.5m. (2) Piping of compressed air upto effluent level of tank with MS Epoxy coated pipe, inside with UPVC pipes, non-clog type air dispersion system, fine bubbled diffusers etc. for equalization, collection, sludge holding and MBBR tanks. (3) 2 nos of submersible pumps for collection tank capable of handling solid waste of 40 to 50 mm at a flow rate of 6 m3/hr at a head of 10m with automatic operation level control system and control system for alternative operation for pumps. (4) 4 nos of submersible pumps for aeration tank capable of handling solid waste of 30 to 40 mm at a flow rate of 3 m3/hr each at a head of 10m (3 for installation + 1 for spare). (5) 4 nos. submersible mixer for anoxic tank with 1 hp motor upto 100 rpm speed ((3 for installation + 1 for spare). (6) MBBR & Tubesettler Media (7) 2 nos of Centrifugal filter feed pump with a flow rate of 6 m3/hr at a head of 30m. (Section side of the pump set shall be connected to clear water tank for filter feed and filtered water for backwash with suitable valve arrangement. (8) Multi Layered Sand Filter with MS Epoxy painted vessel with flow rate 6m3/hr (9) Multi Layered Active carbon Filter with MS Epoxy painted vessel with flow rate 6m3/hr (10) Water softner (11) Sludge Recirculation pump having capacity to handle solid 5 to 10 mm with flow rate of 6m3/hr and at a head of 10m. (12) 2 Nos of Sludge transfer pump at a flow rate of 1 m3/hr at a head of 10m along with centrifuge. (13) Ultra Violet Disinfection System with UV lamp rated for 9000 hrs. (14) 2 nos of Centrifugal pump for UF Feed Pump with a flow rate of 6 m3/hr at a head of 30m. 2 nos of Centrifugal pump for UF Backwash Pump with a flow rate of 10 m3/hr at a head of 30m. (15) Ultra Filtration System with Microprocess base PLC control for design for output of 6m3/hr. (16)    Sludge Drying bed with facility to flow the sludge water to collection tank. (17) 2 nos. of Online Chlorine dosing System for Pre and post treatment of water. (18)  DO sensor cum controller to control blower operation based on DO level in MBBR reactor. (19)    2 nos of pump set with automatic pumping system for pumping processed water from clear water tank to Gardening Water Tank (20) 2 nos of submersible pump with a flow rate of 5 m3/hr at a head of 30m with automatic pumping system with level indicator for pumping out the processed water to Water Tank at Top Level of the Site. (21) Suitable sized UPVC Pipes with accessories, valves, non-return valves etc. as required. (22)  Control Panel with micro processor based MCCB incoming and outgoing, starter, with timer, PLC Control etc. required for automatic alternative operations of each pump, as per brief specification, drawing & specification complete included in the tender document including final statutory approvals from PCB, KSEI etc. The Contractor shall operate the plant in three shifts (24X7) immediately after commissioning and till the plant is stabilized including the cost of consumables. Department will take over the plant only after stabilization of the plant. Completion will be recorded only after plant stabilization. Contractor shall give the training to personnel of the employer for operation and maintenance of the plant. No. of Blocks: One. (H Block)

Constructing, Finishing and making the Effluent Treatment Plant Room (ETP PLANT – H1) functional in all respect: Earth Work Cutting and Levelling in all kinds of Soil, RCC Building, with necessary RCC tanks as per the scheme including internal water supply and Sanitary installations. The building and tanks shall be completed as per the approved drawings and specification. 'Supply, installation, testing & commissioning of Stainless Steel Coarse Screen with suitable lifting arrangement (size shall be as per actual drawings). Spacing between bars to be 16 mm for coarse screens and 10 mm for fine screens. 2 Nos. Supply, installing, testing & commissioning of pH Correction dosing system comprising of 100 Ltrs Cap. FRP/HDPE (chemical grade) tank with inlet/outlet connection and along with 01 no. metering pump of adjustable capacity for dosing of solution (0-6 LPH) ). MoC of Pump shall be in PP (Polypropylene). complete with all other fittings & accessories [Location : Equalization Tank] 1 Nos. Supplying and fixing of submersible centrifugal sewage transfer pump, pump for raw sewage transfer from equalization tank. The pump shall have CI casing, CI impeller, induction motor suitable for 415+10%Volt, 3 Phase, 50 Cycles AC Power supply, dry running protection, complete in all respect including delivery header & delivery pipe (interconnecting piping) with pipe of required dia, isolation valves, NRV & on delivery side of Pumps. SHC for pumps to be min 40 mm. 2 Nos 2 M3/hr and 10m head Supply, installation, testing & commissioning of Sludge Recirculation Pumps to feeding the sludge-to-sludge handling system complete with all the Accessories, Motor of required capcaity. The Pump shall be complete with base frame delivery Header with Pressue gauge on delivery line as per following specification 2 M3/hr and 10m head Supply, installation, testing & commissioning of Gear Motorized Agitator Mixer for the Coagulation Tank having SS 304 shaft and suitable rating motor and gear. [Location : Coagulation Tank]. 1Nos Supply, installation, testing & commissioning of Gear Motorized Agitator Mixer for the Flocculation Tank having SS 304 shaft and suitable rating motor and gear. [Location : Flocculation Tank].1Nos Supply, installing, testing & commissioning of Coagulant Dosing System comprising of 100 Ltrs Cap. FRP/HDPE (chemical grade) tank with inlet/outlet connection and along with 01 no. metering pump of adjustable capacity for dosing of solution (0-6 LPH) ). MoC of Pump shall be in PP (Polypropylene) and complete with all other fittings & accessories [Location : Coagulation Tank]1Nos Supply, installing, testing & commissioning of Flocculant dosing system comprising of 100 Ltrs Cap. FRP/HDPE (chemical grade) tank with inlet/outlet connection and along with 01 no. metering pump of adjustable capacity for dosing of solution (0-6 LPH) ). MoC of Pump shall be in PP (Polypropylene) and complete with all other fittings & accessories [Location : Flocculation Tank]. 1Nos Supply, installation, testing & commissioning of Bio media for primary settling tank and the MBBR tank of reputed make with suitable quantity. The surface area of Tube Deck shall be 11 m2/m3 and 400 m2/m3 for MBBR tank complete in all respect. Providing, Fixing, Testing & Commissioning of all piping & fittings (as described below) and Isolation control valves (Ball valve/Butterfly valve), non return valve for making the system complete. MS C class /GI : submerged piping/pumps suction, pumps discharge headers, tank overflow, drain, frontal, interconnecting, waste water piping. Providing, fixing, testing and commissioning of inline flange mounted magnetic flow meter with IP65 protection, full base, rubber/PTEF liners, SS316L/Hostelloy B,C/Ti/Ta electrodes, SS-304 flow tube, 0.3% in 0.5% of accuracy 220VAC, 50Hz/optional 24VDC supply 20 to 180oC as per model/selection, suitable for sewage & water including all fitting & accessories complete with bypass arrangement. Supply, installation, testing and commissioning of Treated Water Transfer Pumps (HPN pump) for the transfer of ETP treated water for irrigation purposes. Pumps to be complete with necessary headers, piping, valves, base frame, pressure gauges complete. 2 nos of pump set with automatic pumping system with automatic pumping system with level indicator for pumping processed water from clear water tank to Gardening Water Tank. Control Panel with micro processor based MCCB incoming and outgoing, starter, with timer, PLC Control etc. required for automatic alternative operations of each pump, as per brief specification, drawing & specification complete included in the tender document including final statutory approvals from PCB, KSEI etc.. The Contractor shall operate the plant in three shifts (24X7) immediately after commissioning and till the plant is stabilized including the cost of consumables. Department will take over the plant only after stabilization of the plant. Completion will be recorded only after plant stabilization. Contractor shall give the training to personnel of the employer for operation and maintenance of the plant. No. of Blocks: One. (H1 Block)