Construction of Tehsil office building at Paonta Sahib Distt. Sirmour H.P.(SH-C/O additional toilet at tehsildar office, Plaster patch work, tile work, Aluminium work, sanitary fitting, painting and distempering in existing building).

Amount

Demolishing cement concrete manually/ by mechanical means including disposal of material within50 (fifty)metres lead as per direction of Engineer -i -charge.Nominal concrete 1:4:8(one cement : four sand : eight graded stone aggregate) or leaner mix (i/c equivalent design mix including carriage of materials with in all leads, lifts and other incidentals complete as per entire satisfaciton of the Engineer-in-Charge.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 (fifty)metres lead For thickness of tiles 10 mm to 25 mm(ten to twenty five milimetres) including carriage of materials with in all leads, lifts and other incidentals complete as per entire satisfaciton of the Engineer-in-Charge.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal rubbish to the dumping ground within 50(fifty) metres lead.including carriage of materials with in all leads, lifts and other incidentals complete as per entire satisfaciton of the Engineer-in-Charge.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.all kind of soil including carriage of materials with in all leads, lifts and other incidentals complete as per entire satisfaciton of the Engineer-in-Charge.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.including carriage of materials with in all leads, lifts and other incidentals complete as per entire satisfaciton of the Engineer-in-Charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size)including carriage of materials with in all leads, lifts and other incidentals complete as per entire satisfaciton of the Engineer-in-Charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 Cement : 2 coarse sand) : 4 graded stone aggregate 40 mm nominal size)including carriage of materials with in all leads, lifts and other incidentals complete as per entire satisfaciton of the Engineer-in-Charge.

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with Cement mortar 1:6 (1 cement : 6 coarse sand )including carriage of materials with in all leads, lifts and other incidentals complete as per entire satisfaciton of the Engineer-in-Charge.

Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) :With Modular bricks including carriage of materials with in all leads, lifts and other incidentals complete as per entire satisfaciton of the Engineer-in-Charge.

Form work for centering and shuttering including strutting, propping etc. and removal of form for :Suspended floors, roofs, landings, balconies and access platform including carriage of materials with in all leads, lifts and other incidentals complete as per entire satisfaciton of the Engineer-in-Charge.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size).including carriage of materials with in all leads, lifts and other incidentals complete as per entire satisfaciton of the Engineer-in-Charge.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars including carriage of materials with in all leads, lifts and other incidentals complete as per entire satisfaciton of the Engineer-in-Charge.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including carriage of materials with in all leads, lifts and other incidentals complete as per entire satisfaciton of the Engineer-in-Charge.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) :Powder coated aluminium (minimum thickness of powder coating 50 micron)including carriage of materials with in all leads, lifts and other incidentals complete as per entire satisfaciton of the Engineer-in-Charge.

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately Powder coated aluminium (minimum thickness of powder coating 50 micron including carriage of materials with in all leads, lifts and other incidentals complete as per entire satisfaciton of the Engineer-in-Charge.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item With float glass panes of 4.0 mm thickness (weight not less than 10 kg/ sqm) including carriage of materials with in all leads, lifts and other incidentals complete as per entire satisfaciton of the Engineer-in-Charge.

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer- in-charge.Pre-laminated particle board with decorative lamination on both sides.including carriage of materials with in all leads, lifts and other incidentals complete as per entire satisfaciton of the Engineer-in-Charge.

Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per equirement and direction of Engineerin- charge. (Only weight of grill to be measured for payment).including carriage of materials with in all leads, lifts and other incidentals complete as per entire satisfaciton of the Engineer-in-Charge.

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 250x16 mm including carriage of materials with in all leads, lifts and other incidentals complete as per entire satisfaciton of the Engineer-in-Charge.

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc.complete 250*10mm including carriage of materials with in all leads, lifts and other incidentals complete as per entire satisfaciton of the Engineer-in-Charge.

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc.including carriage of materials with in all leads, lifts and other incidentals complete as per entire satisfaciton of the Engineer-in-Charge.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600x600 mm ,including all leads,lifts and carriage of materials, as per the entire satisfaction of Engineer-in-charge.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete Size of Tile 600x600 mm.including all leads,lifts and carriage of materials, as per the entire satisfaction of Engineer-in-charge.

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in- Charge 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern. including carriage of materials with in all leads, lifts and other incidentals complete as per entire satisfaciton of the Engineer-in-Charge.

15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including carriage of materials with in all leads, lifts and other incidentals complete as per entire satisfaciton of the Engineer-in-Charge.

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in- Charge With cement mortar 1:4 (1 cement : 4 fine sand)including carriage of materials with in all leads, lifts and other incidentals complete as per entire satisfaciton of the Engineer-in-Charge.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including carriage of materials with in all leads, lifts and other incidentals complete as per entire satisfaciton of the Engineer-in-Charge.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre including carriage of materials with in all leads, lifts and other incidentals complete as per entire satisfaciton of the Engineer-in-Charge.

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture including carriage of materials with in all leads, lifts and other incidentals complete as per entire satisfaciton of the Engineer-in-Charge.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give and even shade One or more coats on old work including carriage of materials with in all leads, lifts and other incidentals complete as per entire satisfaciton of the Engineer-in-Charge.

Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required shade on old work to give an even shade.including carriage of materials with in all leads, lifts and other incidentals complete as per entire satisfaciton of the Engineer-in-Charge.

Wall painting with acrylic emulsion paint having VOC(Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour two coats including carriage of materials with in all leads, lifts and other incidentals complete as per entire satisfaciton of the Engineer-in-Charge.

Distempering with 1st quality acrylic distemper (ready made) having VOC content less than 50 gm per ltr. Of approved manufacturer and of required shade and colour complete. as per manufacturer’s pecification.One or more coats on old work including carriage of materials with in all leads, lifts and other incidentals complete as per entire satisfaciton of the Engineer-in-Charge.

Finishing walls with Acrylic Smooth exterior paint of required shade Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface including carriage of materials with in all leads, lifts and other incidentals complete as per entire satisfaciton of the Engineer-in-Charge.

Sanitary Fittings:- Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid including carriage of materials with in all leads, lifts and other incidentals complete as per entire satisfaciton of the Engineer-in-Charge.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap including carriage of materials with in all leads, lifts and other incidentals complete as per entire satisfaciton of the Engineer-in-Charge.

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge including carriage of materials with in all leads, lifts and other incidentals complete as per entire satisfaciton of the Engineer-in-Charge.

Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete White solid plastic seat with lid including carriage of materials with in all leads, lifts and other incidentals complete as per entire satisfaciton of the Engineer-in-Charge.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.32 mm dia.including carriage of materials with in all leads, lifts and other incidentals complete as per entire satisfaciton of the Engineer-in-Charge.

Providing and fixing 100 mm sand cast Iron grating for gully trap.including carriage of materials with in all leads, lifts and other incidentals complete as per entire satisfaciton of the Engineer-in-Charge.

Providing and fixing 600*450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete including carriage of materials with in all leads, lifts and other incidentals complete as per entire satisfaciton of the Engineer-in-Charge.

Providing and fixing soil, waste and vent pipes 100 mm dia Sand cast iron S&S pipe as per IS: 1729 including carriage of materials with in all leads, lifts and other incidentals complete as per entire satisfaciton of the Engineer-in-Charge.

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.including carriage of materials with in all leads, lifts and other incidentals complete as per entire satisfaciton of the Engineer-in-Charge.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved brand and colour 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms including carriage of materials with in all leads, lifts and other incidentals complete as per entire satisfaciton of the Engineer-in-Charge.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in charge 100 mm nominal inner dia Pipes metre 2685.05, including all leads, lifts and carriage of materials as per the entire satisfaction of Engineer-in-charge.

Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall :15 mm dia nominal bore including carriage of materials with in all leads, lifts and other incidentals complete as per entire satisfaciton of the Engineer-in-Charge.

Providing and fixing brass bib cock of approved quality 15 mm nominal bore including carriage of materials with in all leads, lifts and other incidentals complete as per entire satisfaciton of the Engineer-in-Charge.

Providing and fixing uplasticised PVC connection pipe with brass unions 15 mm nominal bore including carriage of materials with in all leads, lifts and other incidentals complete as per entire satisfaciton of the Engineer-in-Charge.

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 20 mm nominal bore including carriage of materials with in all leads, lifts and other incidentals complete as per entire satisfaciton of the Engineer-in-Charge.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893 15 mm nominal bore including carriage of materials with in all leads, lifts and other incidentals complete as per entire satisfaciton of the Engineer-in-Charge.

Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge Slip Coupling/ Socket For 15.88 mm outer dia pipe,including all leads, lifts and carriage of materials, as per the entire satisfaction of Engineer-in-charge.

Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge Elbow 90°For 15.88mm outer dia pipe including carriage of materials with in all leads, lifts and other incidentals complete as per entire satisfaciton of the Engineer-in-Charge.

Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge Equal Tee For 15.88 mm (fifteen point eight eight milimetres) outer dia pipe including carriage of materials with in all leads, lifts and other incidentals complete as per entire satisfaciton of the Engineer-in-Charge.

Randhir Singh