MLA ADS KIP RBMC Supply,Fabrication, Painting erection of Cross shutter2nos. size 3000mm H x 2000mm W and overhauling of hoisting mechanism at Nooranadu Ch 63952 m of RBMC

Amount

Dismantling of old damaged shutter form the groove, hoisting mechanism etc. kept safely 100m away from the site - Chipping and demolishing Sill beam & C - groove concrete for fixing secondary embedded parts of 2Nos. shutters.

OD16507/2022-2023:Clearing grass from banks of channel and removal of silt, zoological waste & debris from canal bed, removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared including conveyance charges

OD27690/2024-2025:Providing temporary platform for demolishing existing civil structure, concreting and plastering including cost of all materials, labours etc. complete TEMPORARY PLATFORM [40 times usage as life period (assumed) for these materials, hence cost for 1 time used]

OD27688/2024-2025:RING BUND Type-I-Putting up ring bund as per approved shape 2.5m bottom width, 1m top width using empty gunny/polythene bags filled with earth placed in 2 rows at 0.6m apart and filled in between with puddle clay to form bund for an average height 2.00m including labour dismantling the bund after completion of the work etc. complete.

OD27687/2024-2025:Bailing out water Using 5HP Pump- Bailing out water with 5HP engine and pump set including conveyance to site and erection,cost of fuel, lubrication oil and other stores, pay of staff etc complete

OD16508/2022-2023:Dismantling of the Canal Shutter ( Up to 2 Tonne weight ) / Hoisting Unit / Embedded parts etc. of the sameand stacking at a distance of 100 meter including hire of machinery labour etc. complete as directed by thedepartmental officer at the site.(weight of the unserviceable shutters and embedded parts may be calculatedas 60% and unserviceable hoisting units as 80 % )

5.2.2:Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

13.7.1:12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand)

Supply fabrication and erection for 2Nos. Cross shutter Embedded parts and hoisting unit

OD858/2023-2024:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

OD859/2023-2024: Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

OD27621/2024-2025:Supply of MS round bar including cost of conveyance charges

OD16511/2022-2023:Fabrication and errection of Embedded parts for canal shutters ( lJp to 2 tonne weight ) and accessories as per approved specifications, drawings and directions of deptl fficer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied

OD16512/2022-2023:Fabrication, Supply, erection and assembling in correct position and alignment by welding SS Embedded parts in 304L Grade like roller track, seal track,seal seat etc as per approved specifications, drawings and directions of deptl fficer at site including cost of all materials,labour,machinery for planing, welding,shearing, grinding etc,lead and lift, conveyance, incidental and handling etc complete

OD16510/2022-2023:Fabrication and supply of Structural steel canal shutters ( Up to 2 tonne weight )/Hoisting bridge/Platform and accessories etc. for the same as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied

OD16513/2022-2023:supply the M.S bolt and nut

OD16514/2022-2023:Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the gates including cost of MS bolts and nut all labour and machinery and incidental and conveyance charges complete as per approved specification and drawing

OD16515/2022-2023:Supplying and fixing in correct position with specified initial interface L-type / bulb nose rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings

85.114:Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

OD16516/2022-2023:SUPPLYING and FIXING CAST STEEL THRUST ROLLER ASSEMBLY forVERTICALLIFT GATE having 110mm Dia, 80mm tread width, SS(304) shaft with bronze Bush and accessories as per approved specifications and drawings including cost of all materials,machineries, labour , all lift andlead, incidental and conveyance charges etc complete.

OD16517/2022-2023:Erection of the Canal Shutter ( Up to 2 Tonne weight )/Hoisting Bridge/Platform including . alignment correcting and setting complete including cost of all labour, machinery, incidental and conveyance , lead and lift charges etc complete but excluding cost of materials already supplied

Overhauling & painting of hoisting mechanism and conducting trail run

OD16518/2022-2023:Overhauling of one number worm and pinion reduction gear assembly unit with hand operating system and bend checking of screw rod , providing new handke fir operation etc. including hire charge of equipment, energy charges, conveyance, all leads and lifts etc. complete as per directions by the dept. officers at site

85.115:Cost of painting with 2 coats of enamel paint over 1 coat of zinchromate primer as per IS1477:1994 after hand and power tool cleaning including cost of all materials, labour charges, cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.44.1:Finishing walls with water proofing cement paint of required shade:New work (Two or more coats applied @ 3.84 kg/10 sqm)

OD16519/2022-2023:Trial run the gate with its hoisting mechanism etc. including cost of all materials, machinery , labour, all lift and lead, incidental and conveyance charges etc. as per instruction of departmental officers in charge

Bidder Name

JOBIN JOSEPH