Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.4 LAccepted-AOC | L1 | Accepted-AOC Agreement executed on 11/02/2025 | |
| 2 | L2₹1.5 L+₹1,160.52 (0.81%)Rejected-AOC | L2 | Rejected-AOC Higher rate and hence not admitted |
Tender Value
₹1.5 L
EMD Value
₹3,626
Closing Date
4 Jan 2025, 6:00 pmClosed
SAJU P
Office of The Assistant Engineer, LID EW Section , Peravoor Grama Panchayat
Annual Plan-Peravoor GP Theru Water Scheme Project- Pro. No 197/25 -Supply and Providing Motor Pump Set and Electrification.-General Electrical Work
2024_LSGD_719899_24
ET-3/2024-25/AE/LSGD/PVR
Open Tender
Electrical Works
Item Rate
120 days
Peravoor GP
Please refer Tender documents.
8 documents required · 8 mandatory
₹555
Yes
₹3,626
Yes
14 Mar 2025
27 Dec 2024
7 Jan 2025
27 Dec 2024
4 Jan 2025
27 Dec 2024
Amount
Water pump installation
90.14.1.2:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)
90.14.2.1:Supply and providing 2mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc.
90.14.3.2:Supply and providing heavy duty 'A' section neoprene gasket in the panel boardU' section rubber beeding suitable for 1.60/ 2.00 mm sheet
2.1.1:Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.32 Amp TP & N
90.14.24.4:Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.4 KVAr, 3 phase, 440 V, delta connected standard duty Metalised Poly Propylene Cylinderical Capacitor suitable for direct connection to motors.
90.14.24.42:Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.3 KVAr, 3 phase, 440 V, Metalised Poly Propylene Heavy duty, Box type resin filled Capacitor suitable for APFC panel without block reactor.
90.14.28.4:S & F Motor starters of the following ratingsSemiautomatic star delta starter for 5 to 7.5HP motor
OD313003/2024-2025:Supply ,installation, testing and commissioning of 5 HP. 6 stage three phase submersible motor pump set stainless steel impeller( Deccon/ pump or eqvt.) 29-116 m head, delivery size 50/65 mm using leak proof materials and suspended on stainless steel rope/nylon rope including fixing and connected delivery pipe one by one to the motor up to the bottom of the well using leak proof materials as required with necessary supports on both sides of the motor including giving connection and trail run etc.
OD313002/2024-2025: Dismantelling the existing damaged 5to15 HP motor pump set with accessories from the well/Pump house and transferred to the concerned Office store
OD312713/2024-2025: Supply and providing single phasing preventer
OD312708/2024-2025:LED indicators for all voltage ranges - Red, Green &blue Colour
OD312712/2024-2025:0/600Vanalogue type AC volt meter with 90* defluction scale (72x72mm)
OD312714/2024-2025:2A bolted offset tag type fuse link(group A)
1.21.2:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm
1.17.22:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 4 sq. mm
90.6.6.3:Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.4 sq mm
2.13.1:Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps
2.15.2:Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps
OD312701/2024-2025: Supply and providing50/65 mm GM Non Return Valve heavy duty as required
OD312717/2024-2025: Supply and providing50/65 mm MS flange set as required.
OD313029/2024-2025: Supply ,installation, testing and commissioning of pressure guage with 0 to 12kg range 4" dia. as required.
OD312702/2024-2025:Supply. conveyance, laying and joining of50 mm size HDFE flexible pipe 6 to10 kg cm approved make with required accessories as delivery pipe using required proofing materials etc.as required
OD312706/2024-2025: Supply,conveyance and providing 50 mm stainless clip as required.
OD312703/2024-2025:Supply conveyance and providing 50/65 mm GI hose coller
OD312705/2024-2025:Supply conveyance and providing 12 mm nylon rope.
5.4:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
OD312707/2024-2025:Supply and providing earth lead from the test joint to the earth electrode using 25 x 3 mm GI strips including cutting, drilling necessary holes (in case of strip) and fixing firmly with plate test joint etc as required
OD312704/2024-2025:Supply and providing test joint for the earthing system using 2 x 25 x 3 mm GI strip including cutting and bending to shape, drilling necessary holes and fixed to the watering pipe etc as required
OD312709/2024-2025: Supply and providing 32 A HRC Fuse with 25 A Fuse link and giving connection on existing panel board.
OD312711/2024-2025:Supply and providing 32-A Neutral link mounted on DMC/ SMC base and giving connection on existing panel board.
OD312710/2024-2025:Supply & installation of dust and vermin proof, wall mounting, single/three phase syntax meter box (GS MB-4537) cm for fixing KSEB meter,fuse units, CT,MCB,timer etc, hinged door construction , providing vision panel for the meter compartment, knock out for cable entry and exit etc.as required including fixing to wall and making good the wall as required..
90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)
90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)
OD312700/2024-2025:Supply and providing the 25 x 3mm brass bolt & nut with washers on the existing MS box / earth bus etc. as required including drilling necessary holes as required
90.3.18.1:Supply, fabrication, conveyance and fixing the following sizes of B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required.25 mm dia with HG company fabricated clamps
90.17.8.4:Providing, laying, testing & commissioning of 'B' class heavy duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :50 mm
90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board
Sreerag. k.k (BID ID -2048772)
Bidder Name
Sreerag. k.k
VIJESH OV
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .