Supply and Installation of Electronic Works at Skill Center, Medical College, Thiruvananthapuram

Amount

LAN SYSTEM

Supply and Installation of Layer 2 Managable 24 port Ethernet Switch which having 24 x 10/100/1000 Mbps + 4 x GbE SFP ports, forwarding Capacity ≥41 Millions of Packets per Second (mpps) (64-byte packets) and 56 Gbps Switching Capacity in Gigabits per Second (Gbps), support upto 4094 VLANs and 16K MAC address, supporting ipv6, Priority levels up to 8 hardware queues, up to 9216 Jumbo frames, device should have minimum 512 MB SD RAM, 256 MB flash memory, 3 year warranty. Approved Make: Cisco, Allied Telesis, Brocade,Cisco, HP, Netgear

Supply and Installation of POE+ Injector having PoE+ ports supports IEEE802.3at and IEEE802.3af standard, equipped with gigabit port, Plug and play etc. Preferred Make: Ubiquiti, TP Link or equivalent

Supply, Installation, Testing and Commissioning of Wall/Ceiling mount WiFi 6 Access Point having Throughput ≥570Mbps for 2.4GHz and ≥ 1200Mbps for 5GHz, ≥40 Concurrent devices, POE Powered ethernet ports, Support IEE802.11ax, WPA3 and 4 SSID or better security and other accessories with necessary Electrical Connections if needed also with three year warranty Approved Make: Cisco, Juniper, HP, Fortinet, Aruba, Netgear

Supply and fixing 24 port Enhanced CAT-6 fully loaded Modular type patch panel as per EIA/TIA-TSB 40A specification for interconnecting servers and clients, including termination charges. Preferred Make: Commscope, Actassi, Belden, Panduit, R&M, Molex or equivalent

Supply and fixing UL Certified CAT-6 Information Outlet for 1000Mbps with spring shutter / dust cover face plate + Single RJ45 Jack+ SMB including termination charges etc. Preferred Make: Commscope, Actassi, Belden, Panduit, R&M, Molex or equivalent.

Supply and Installation of UL Certified CAT-6 information outlet for 1000Mbps having spring shutter / dust cover dual face plate with SMB, two numbers of RJ45 keystone sockets, including termination charges etc. Preferred Make: Commscope, Actassi, Belden, Molex, R&M or equivalent

Supply and fixing UL Certified CAT-6 Information Outlet for 1000Mbps with spring shutter / dust cover face plate + Single RJ45 Jack + Single RJ11 Jack + SMB including termination charges etc. Preferred Make: Commscope, Actassi, Belden, Panduit, R&M, Molex or equivalent.

Supply, laying, certification and documentation of LSZH CAT-6 UTP cable 23 AWG through the existing conduit and cassing and capping as required. Approved Make: Commscope, Actassi, Belden, Panduit, R&M, Molex

Supply, laying, certification and documentation of weather proof fully Armored CAT-6 outdoor 23AWG UTP cable. Preferred Make: Commscope, Actassi, Belden, Panduit, R&M, Honeywell or equivalent

Supply and providing 3Mtr LSZH CAT-6 Giga UTP patch cord. Preferred Make: Commscope, Actassi, Belden, Panduit, R&M, Molex or equivalent

Supply & providing 1Mtr LSZH CAT-6 Giga UTP patch cord. Preferred Make: Commscope, Actassi, Belden, Panduit, R&M, Molex or equivalent

Supply and fixing of 25mm medium PVC ivory conduit/ oval conduit/ casing-n-caping with special confirming to ISI standard on surface/recess using suitable size fixtures spacing not exceeding 50cm including cutting the wall and making good the same in case of recessed conduit, colour washing etc as required Preferred Make: TOMS, BALCO, Espee or equivalent

Supply and fixing of 20mm medium PVC ivory conduit/ oval conduit/ casing-n-caping with special confirming to ISI standard on surface/recess using suitable size fixtures spacing not exceeding 50cm including cutting the wall and making good the same in case of recessed conduit, colour washing etc as required Preferred Make: TOMS, BALCO, Espee or equivalent

Supply and fixing of 32mm medium PVC ivory conduit/ oval conduit/ casing-n-caping with special confirming to ISI standard on surface/recess using suitable size fixtures spacing not exceeding 50cm including cutting the wall and making good the same in case of recessed conduit, colour washing etc as required Preferred Make: TOMS, BALCO, Espee or equivalent

Supply and fixing 50 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required. Accessories including External Angle 90°, Flat Angle 90°/TEE, Internal Angle 90°, Internal Coupler, Flat cross, End Cap, Flanged Coupler, Joint cover, Cable Retainer, Wall plate for internal angle etc. Preferred Make: OBO, MK, Legrand or equivalent

Supply and fixing 19'' 12U Network Rack with ACDB 6 port with 1U Slotted type Rack Mountable Horizontal Cable Manager Duct necessary tray etc. Preferred Make: D-Link, HCL, Netrack, President, Valrack or equivalent.

Supply of Electronic Equipments

Supply and installation of 3LCD Ultra Short Throw Projector having WXGA 16:10 resolution, 4,000 lumens of colour and white brightness, Laser light source life (20,000-hours or better), Screen Mirroring, project up to up to 120inch, Throw Ratio Range: 0.26 – 0.36, Zoom Ratio: 1.0 – 1.35 (Digital Zoom), Focal Length: 3.7mm or better, Connectivity: RJ45, HDMI, D-Sub, USB etc. Preferred Make: Epson, Canon, Sony or equivalent

Supply and installation of Adjustable Wall Mount kit for Ultra-Short Throw Laser Displays for projecting 16:9 content etc.

Supply, Installation, Testing and Commissioning of 150" Motorized Ceiling & Wall mount projector screen with necessary Electrical Connections Preferred Make: Liberty, Logic, Suvira or equivalent

Supply and installation of 3LCD Projector having WXGA with ≥4200 lumens colour light output, ≥16,000:1 contrast ratio, ≥17,000 Hours Lamp Life in Eco Mode, Throw Ratio 1.38 – 2.24, 1.6x optical zoom, Split Screen ,2 HDMI input, Wired LAN, Wireless LAN (Optional) etc.with necessary Electrical Connections Preferred Make: Epson, Canon, Sony or equivalent

Supply, Installation, Testing and Commissioning of 7X5 tripod stand projector screen Preferred Make: Logic, Altop, Suvira

Supply and Installation of ≥65” Interactive Flat Panel Display having Anti-Glare protection glass with following specifications : Resolution 3,840 x 2,160 (UHD), Response Time : 8ms, Multi Touch : Max20 points/Max 10 writing. Dual pen compatible, Contrast Ratio (Typical) : 4,000:1, Brightness: ≥ 370cd/m2, Viewing Angle (HxV) : 178x178, Orientation : Landscape. Operating System Support: Windows 7/8/10/ Linux/ Mac/Android. Quad core CPU with 650 MHz GPU or better, min 3 GB RAM and 16 Gb ROM. Touch Type : IR, Pen and fingure. Connectivity: Input : Video / Audio HDMI 2.0 (4K @ 60Hz) x 2 (2), VGA/HDMI (1920x1080) x 1, RGB / Audio In (Mic In), USB: USB 2.0 (2), USB 3.0 (3), Touch In: USB 2.0. External Control : RJ 45/RS 232(c), Output : HDMI, Optical Output / Audio Out (Stereo Mini Jack). Speaker Built in : Max power out ≥ 30W (15W + 15W) or above, Ops slot support 4K @ 60Hz/30Hz including all accessories such as Power Cord, USB Cable for touch, HDMI cable, Writing Pen*2pcs, Remote Control, mouting kit, etc as per site condition. Approved Make: LG, Sony, Samsung,Viewsonic, Newline

Supply and Installation of ≥32” LED Back lighted Television with wall mounting kit, HDMI cable etc.with necessary Electrical Connections, 3 year warranty Approved Make: LG, Philips, Samsung, Sharp, Sony

Supply and Installation of Wall Face plate for HDMI 2.0 (4K at 60Hz) with one HDMI female connector, Back box suitable for above made of ABS Plastic with mounting screws, suitable for connecting laptop and Interactive Display etc. Approved Make:-Honeywell, Kramer, Legrand, L&T

Supply and Installation of Wall Face plate for 1 number of HDMI 2.0 port (4K at 60Hz) and 2 number of USB port (support distance 10m from the source in 4K and up to 30 mtr 1080p @ 60Hz resolutions) Including required length USB cable and HDMI cable to connect display from the box and USB cable from box to Laptop(Apprx.10mtr). Back box suitable for above made of ABS Plastic with mounting screws, suitable for connecting laptop and Interactive Display etc. Approved Make:-Honeywell, Kramer, Legrand, L&T

Supply and Installation of HDMI cable of 5 Meter Approved Make: Honeywell, Kramer.

Supply and Installation of HDMI cable of 10 Meter Approved Make: Honeywell, Kramer.

Supply and Installation of HDMI cable of 15 Meter Approved Make: Honeywell, Kramer.

Supply and fixing of 25mm medium PVC ivory conduit/ oval conduit/ casing-n-caping with special confirming to ISI standard on surface/recess using suitable size fixtures spacing not exceeding 50cm including cutting the wall and making good the same in case of recessed conduit, colour washing etc as required Preferred Make: TOMS, BALCO, Espee or equivalent

CCTV SYSTEMS

Supply and Installation of ≥ 4MP Dome Camera with ≥30 meter IR Distance, 1/2.8” or better CMOS Image Sensor, 2.8mm focal length of lens, shutter speed 1s to 1/100,000s or better, Wide Dynamic Range up to 120dB, Defog, Digital Noise Reduction, Input Power POE and 12v DC, Max resolution of 2560x1440 pixels or better, day/night IR-cut filter with auto switch. Should have Crossline, Intrusion detection. Video Compression H.265+,H.265,H.264, IP 67, IK10 rating, HLC/BLC etc. ONVIF compatibility, Camera should support memory card slot up to 512 GB Capacity, support surge protection and built in mic etc. Preferred Make: Honeywell, Axis, Norden, Bosch or equivalent

Supply and Installation of ≥ 4MP Compact Bullet Camera with ≥30 meter IR Distance, 1/2.8" or better CMOS Image Sensor, 3.6/ 4mm fixed lens, shutter speed 1s to 1/100,000s or better, Wide Dynamic Range up to 120dB, Defog, Digital Noise Reduction, Input Power POE and 12v DC, Max resolution of 2560x1440 pixels or better, day/night IR-cut filter with auto switch. Should have Crossline, Intrusion detection.Video Compression H.265+,H.265,H.264, IP 67 rating, HLC/BLC, ONVIF compatibility, Camera should support inbuilt memory card slot up to 512 GB Capacity, support surge protection and built in mic etc. Preferred Make: Honeywell, Axis, Norden, Bosch or equivalent

Supply and Installation of 16 Channel NVR that supports upto 8MP IP cameras for display and recording, should support bandwidth of minimum 150Mbps incoming, and 64Mbps outgoing, supports H.265+,H.265, H.264, audio output, 2 SATA interfaces that support upto 10TB of HDD each, 2x USB 2.0, 1 x Gigabit (10/100/1000) ethernet port, ONVIF Support, HDMI Video output at up to 4K, including wireless mouse with usb receiver etc. Preferred Make: Honeywell, Axis, Norden, Bosch or equivalent

Supply, laying, certification and documentation of LSZH CAT-6 UTP cable 23 AWG through the existing conduit and cassing and capping as required. Preferred Make: Commscope, Actassi, Belden, Panduit, R&M, Molex or equivalent

Supply and Installation of 16 port Auto sensing 10/100/1000 Mbps PoE+ L2 Manageable Switch having minimum 8 PoE+ port, switching capacity ≥ 20Gbps, minimum CPU memory 128 MB with 2 SFP/combo ports.Power budget ≥120W . AC 230V power input. Approved Make: Cisco, Allied Telesis, Brocade, HP, Netgear

Supply and Installation of 8 TB Surveillance Hard Disk Drive. Preferred Make: Barracuda, Seagate, WD or equivalent

Supply and Installation of ≥32" LED Professional Display capable of working 16/7 or more with resolution of HD or higher for surveillance. OEM warranty for 3 years with necessary Electrical Connections. Preferred Model: Sony, LG, Samsung or equivalent

Supply and fixing 24 port Enhanced CAT-6, 12 port loaded rack mountable modular type patch panel as per EIA/TIA-TSB 40A specification for interconnecting servers and clients, including termination charges. Preferred Make: Actassi,Belden,Panduit,R&M or equivalent

Supply and fixing of UL cerified 1 or 2 module modular PVC Box. Preferred Make:Honeywell or equivalent

Supply & providing 1 Mtr LSZH CAT-6 Giga UTP patch cord. Preferred Make: Commscope, Actassi, Belden, Panduit, R&M, Molex or equivalent

Supply and fixing of 25mm medium gauge PVC ivory conduit/oval/capping casing with special confirming to ISI standard on surface using suitable size fixtures spacing not exceeding 50cm including making good the damage colour washing etc as required. Preferred Make: TOMS, BALCO, Espee or equivalent

Supply and fixing of 20mm meduim gauge PVC ivory conduit/oval/capping casing with special confirming to ISI standard on surface using suitable size fixtures spacing not exceeding 50cm including making good the damage colour washing etc as required. Preferred Make: TOMS, BALCO, Espee or equivalent

Supply and fixing 19'' 9U Network Rack with ACDB 6 port with 1U Slotted type Rack Mountable Horizontal Cable Manager Duct necessary tray etc. Preferred Make: D-Link, HCL, Netrack, President, Valrack or equivalent.

Supply, Installation, Testing and Commissioning of 1KVA Online UPS with ≥ 1 hour battery (External 12V 100AH SMF Battery) back up on full load.with necessary Electrical Connections. Warranty 3 year Preferred Make: APC, Numeric, Eaton, Emerson, or equivalent

Charges for electrification to CCTV switch and LAN switch using conduit and cable (Wiring, module box and power sockets etc. As per site requirement)

EPABX SYSTEM

Supply and fixing of UL Certified Information Outlet with spring shutter/ dust cover face plate+SMB+one number of RJ11 jack including termination. Preferred Make: Commscope, Actassi, Belden, Panduit, R&M, Molex or equivalent.

Supply, Installation and commissioning of Caller ID phones (DTMF) with glass epoxy coated PCB. Preferred Make: Panasonic, Beetel or equivalent

Supply, Installation and commissioning of Electronic push button DTMF telephone with glass epoxy coated PCB. Preferred Make: Panasonic, Beetel or equivalent

Supply & Laying of 10 pair PVC Telephone cable of conductor size 0.51 mm ATC copper in the existing PVC conduits/ oval conduits/casing-n-capping etc as required. Preferred Make: RR, Finolex or equivalent

Supply & Laying of two pair PVC Telephone cable of conductor size 0.51 mm in the existing PVC conduits/ oval conduits/ casing-n-capping etc as required. Preferred Make: RR, Finolex or equivalent

Supply and fixing of door type junction boxes with lock and fitted with Krone make modules for 10 pair

Supply and fixing of 20mm meduim gauge PVC ivory conduit/oval/capping casing with special confirming to ISI standard on surface using suitable size fixtures spacing not exceeding 50cm including making good the damage colour washing etc as required. Preferred Make: TOMS, BALCO, Espee or equivalent

PA SYSTEM

Supply and Installation of Amplifier with Digital player 50/70W RMS , Built- in MP3 player with USB reader and remote, minimum 3mic and 1 aux input etc. Preferred Model : Ahuja, Studio master, TOA or Equivalent

Supply, Installation, Testing and Commissioning of Wall Mountable 6W PA Speaker, Power Taps: 6W / 3W / 1.5W on 100V, Frequency Response: 60-15000Hz, etc. Preferred Model : Ahuja, Studio master, Apart or Equivalent

Supply and Installation of Paging Microphone with Sensitivity: 2mv/Pa, Frequency Response: 50-10000 Hz or better, impedance: 600 ohm etc. Preferred Model : Ahuja, Studio master, Shure or Equivalent

Supply and installation of 9U equipment rack for fixing all rack mountable units with power distribution units , internal wiring, cooling fan, front glass door, necessary tray for keeping the equipments etc. Preferred Make: D-Link, HCL, Netrack, President, Valrack or equivalent.

Supply and Installation of Speaker wire 2 run 1.5 sq.mm multistranded copper conductor confirming to IS 694 Part I / 1969 round cable with speakon. Preferred Make: Finolex, RR or equivalent

Supply and fixing of 20mm medium PVC ivory conduit/ oval conduit/ casing-n-capping with special confirming to ISI standard on surface/recess using suitable size fixtures spacing not exceeding 50cm including cutting the wall and making good the same in case of recessed conduit, colour washing etc as required Preferred Make: TOMS, BALCO, Espee or equivalent

Supply, Installation, Testing and Commissioning of Professional Supercardioid Dynamic Microphone having Frequency Response: 40-16,000Hz, Sensitivity: 1,8 mV/Pa, Impedance:350Ω, with ON-OFF switch etc. Preferred Model: Sennheiser, Beyerdynamic or equivalent.

Supply, Installation, Testing and Commissioning of light weight Aluminium Microphone stand medium length Preferred Model: Samson, Hercules or equivalent.

Supply, Installation, testing and commissioning Design cabinet speaker, 4" coated paper cone woofer, 1" dome tweeter, 30Watts RMS@ 16Ω ,Sensitivity (1W/1m) 86 dB, Dispersion (H/V) 130° or better with 30° incline mounting bracket. Approved Make: Audac, TOA, Apart, RCF, Yamaha

Supply, Installation, Testing and Commissioning of 10-Channel Mixing Console having Max. 4 Mic / 10 Line Inputs, 1 AUX, 24-bit / 192kHz 2in / 2out USB Audio functions, XLR balanced outputs, D-PRE” mic preamps with an inverted Darlington circuit, +48V phantom power etc. Approved Make: Yamaha, Behringer, Soundcraft

Supply, Installation, testing and commissioning of Dual Channel Power Amplifier 2 X 150 Watts @ 100V / 4 Ω, Frequency Response (± 3 dB) 20 Hz - 20 kHz, Bridge Mode 1 X 300 Watts @ 8 Ω , Class D Amp Topology ,Signal / Noise > 90 dB, THD+N (@ 1 kHz) < 0.1% (1/2 Rated Power), Crosstalk (@ 1 kHz) > 70 dB Convection Cool, 1 U 19" Rackmount Approved Make: Audac, TOA, Apart, RCF, Yamaha

Supplying and drawing of cable Fire Retardant PVC insulated copper conductor speaker cable in the existing surface / recessed existing conduit of 2 core 1.5 Sq.mm including connections and interconnections etc. as required. Preferred Make: Belden or equivalent.

Supply and Laying of 2 core Shielded PVC Insulated Microphone cable with Ultra low Capacitance 60(Pf/m) ; Outer Jacket : PVC Matt; Working Temperature: 20 °C / +70 °C ; Diameter : 6.5mm; extreamly flexibel as per the tender specifications. Preferred Make: Belden, Klotz, Gotham or equivalent.

Supply, Installation and Fixing of XLR Jack connectors (XLR M/F as per site requirements) Preferred Make: Neutrik or equivalent.

Supply, Installation and Fixing of EP/Phono/3.5mm Jack connectors (as per site requirements) Preferred Make: Neutrik or equivalent.

Supply and installation of ≥17U Floor mountable equipment rack for fixing all rack mountable units with power distribution units , internal wiring, cooling fan, front glass door, necessary tray for keeping the equipments etc Preferred Make: Legrand, APW, Netrack or equivalent

ANON SYSTEMS AND SERVICES